I think these price comparisons are fairly accurate. A new 30S-1 costed about
the same as a new low end car. A Fiat 1100D or VW Beetle went for around
$1500-1800 in the early 60s and a low end car today would be around $12-15,000.
However, with ham gear and with cars, actually anything with
It's a purpose built switcher, so they may have been able to use
passive-only thermal management...
__
Clay Autery, KY5G
On 5/1/2017 9:05 PM, Charles Johnson wrote:
> I’ve seen no mention of a fan inside the power supply cabinet of the new
> KPA1500. Anyone know if one is
On 2017-04-30 11:26 PM, Rick Dettinger wrote:
And, that was for an amplifier that would have been closer to the KPA500 amp.
About 500 watts out.
73, Rick, K7MW
Collins 30S-1 Linear Amplifier (1 KW), 1958, original cost: $1556, cost in 2017
dollars: $13,264
So, a new technology K-Line
All it takes is a little too much pressure for too long on the "left" Mode
button and you Reverse the Mode.
Sent from my iPhone
...nr4c. bill
> On May 1, 2017, at 10:39 AM, louis a. ives wrote:
>
> I feel like a idiot, Ted was right upper side band had flipped to
I’ve seen no mention of a fan inside the power supply cabinet of the new
KPA1500. Anyone know if one is there and what might be the noise impact?
Variable speed maybe?
73, Charles, K4ZRJ
__
Elecraft mailing list
Home:
Not I.
I use the DELETE key a lot.
We don't need another group, but maybe a bit more etiquette on this one.
Sent from my iPhone
...nr4c. bill
> On May 1, 2017, at 8:05 AM, Michael Walker wrote:
>
> Hi All
>
> I am thinking of starting an Elecraft email forum that
I respectfully suggest that we show Eric we can play nice all by
ourselves and close this & related OT threads.
And yes, my delete key works fine.
Thanks & 73,
Josh
On 4/30/2017 6:44 PM, KG7FYI wrote:
The models DOGAMI (Oregon Dept. of Geology and Mining) has released
shows a 71 foot tsunami
Paul,
Actually, it is easy to take the cover off (9 screws) and see,
especially if the SubRX is not installed.
Download the K3 Assembly manual to see how it goes together for the
various options and allow you to check them for presence or absence.
If you ordered the K3 Factory Built, then
A Great Idea, Rick!
I have been a Ten Tec patron for years (and still have an Omni VII and 6N2),
and am now new to Elecraft with a upgraded K3, KPA500, KAT500, P3. I would
find your “K3, Explain Thyself” a great feature to add in a future firmware
upgrade along with a cryptic line defining
I have been a part of this list since it started.
I almost never post, and always lurk,
but I am still an integral part of this grest thing.
This group, and this product
IS LIKE NO OTHER PRODUCT
IN THE KNOWN UNIVERSE.
I belong to another group called the Ampex list,
which has an alternate group
Sort of, Paul. There are CONFIG menu items for many of the optional
components including KAT3, KBPF3, KDVR3, KIO3, KPA3, KRC2 (external
device), KRX3, KXV3, and the various FLn filters both Main and Sub.
However, you can't necessarily trust their settings. Some can be set On or
Nor(mal) even if
Just because a "device" will do under 2 dB (or whatever) doesn't mean an
amplifier necessarily will. Circuit losses, mismatch and bias settings will
affect the circuit NF.
Additionally, something like an HP noise source is made to be a good source
match, both on and off. Those with lower
Short version: Accept no substitutes.
Rick nhc
On 5/1/2017 12:25 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
As the central Elecraft community discussion forum, we rely on this
list both to post official Elecraft updates and to get motivational
feedback, marketing and technical info from all
Buddy,
If you are using a logging program with even a smidgen of rig control (band,
mode, etc..) sometimes it can make ‘flip’ when you least expect it.
I have a logging APP that has flipped USB and LSB when clicking on a ‘spot’
that is displayed in the program.
This APP has also been known to
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Eric
/elecraft.com/
Elecraft eMail LIST GUIDELINES 2017
For those of you who are new to the list, (and for those of us who have rapidly
failing memories) here is a quick list of things to remember when posting to
this list. Please save this for future reference.
The most important thing
I'd like to close this thread at this time to reduce email overload for our
other readers.
As the central Elecraft community discussion forum, we rely on this list both to
post official Elecraft updates and to get motivational feedback, marketing and
technical info from all of you. Its a huge
Hi Jim. Yep, Ora caught me offline and put me back on track. It's was a
case of me thinking RF flow and Ora was talking about keying.
73,
Kev K4VD
On Mon, May 1, 2017 at 2:56 PM, Jim Rhodes wrote:
> I think he means the control cable. KAT500 comes before KPA500 there and
>
That was my reaction as well, but that is what the QST review states.
John
WA1EAZ
> On May 1, 2017, at 3:02 PM, Charlie T, K3ICH wrote:
>
> I'll bet it’s a lot better than that.
>
> A 39¢ GG junction FET pre-amp will do under well 2dB on 6.
>
> Charlie k3ICH
>
>
I'll bet its a lot better than that.
A 39¢ GG junction FET pre-amp will do under well 2dB on 6.
Charlie k3ICH
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ab2tc
Sent: Monday, May 01, 2017 2:08 PM
To: elecraft@mailman.qth.net
Subject: Re:
For the Elecraft "brain trust"
I have a K3, P3 and KAT500 that I am about to sell.
How do I inventory the K3 so that I can list what options and filters it has?
Is there a way to do this from the menus short of taking the cover off?
Thanks,
Paul n6psep...@n6pse.com
I think he means the control cable. KAT500 comes before KPA500 there and
three tunes has the ability to interpret PTT to the amp.
Jim Rhodes
K0XU
On May 1, 2017 10:06, "Kevin - K4VD" wrote:
Hi Ora...
I'm confused. You say you removed the tuner and connected the amp directly
Hi,
According to the ARRL review in November, 2dB! Deaf no more.
AB2TC - Knut
stengrevics wrote
> Does anyone know what the preamp 2 noise figure is on 6 meters? I have
> not been able to find it in the owner's manual or in Fred's book.
>
> Thanks,
>
> John
> WA1EAZ
--
View this
I strongly disagree with starting another forum-there’s already plenty.And-a
number of other forums I subscribe to go ‘way farther off than this one. Do us
all a favor-don’t divide the knowledge. Eric and Wayne do a fine job moderating.
Dan Presley N7CQR
n7...@arrl.net
> On May 1, 2017, at
Does anyone know what the preamp 2 noise figure is on 6 meters? I have not
been able to find it in the owner's manual or in Fred's book.
Thanks,
John
WA1EAZ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3S-Preamp-2-Six-Meter-Noise-Figure-tp7630221.html
Sent from the
Years ago, right after I got my K3 [S/N 642], it quit working on 30
meters. No receive, infinite SWR on transmit, fine everywhere else.
Email conversation with support had me try several things to no avail so
they said they were going to escalate it, give them a time and number to
call.
Bob, W4/KP4Y said:
I agree with other gentleman that Jim can be very offensive in his responses
sometimes.
I don't mean to be offensive, but there are times when it is appropriate
to "tell it like it is." As Clay and others have noted, the new ham in
question was repeatedly ignoring the
Count me out too...
I have a perfectly working delete key and I know very well how to select
a group of mails that are of no interest to me and how to create message
filters...:-)
Op 2017-05-01 om 15:04 schreef Jim Rhodes:
On 5/1/2017 5:05 AM, Michael Walker wrote:
How many of you would be
Well sir, we'll have to agree to disagree. The young HAM (in HAM years
anyway) was not LISTENING to those from whom he had openly solicited
advice.
He was informed of this, perhaps lightly chastised... Now that he is
aware, he may choose whether to modify his behavior to be more
productive
Well, there are lots of folks who think their off-topic post is clever
enough or important enough to justify it, so self control isn't likely
to be very effective. The most effective way to combat off topic posts
would be for others on the list to gently remind offenders, but
Wayne/Eric
I've been around this reflector for 17 years - so far - and this issue has
come up many, many times.
Here are the guidelines Eric posted most recently:
"The PRIMARY purposes of this list are to provide a -polite- and enjoyable
forum for discussing Elecraft products, share mods, new ideas,
Not at all interested. It takes me maybe 15 seconds to scan through the
Subject headers to delete the ones I'm not interested in, or have become
bored with, and I get just as many messages as you do.
Besides, unless you plan to moderate your list (which will take you FAR
longer to do than
I would like to request we stay on the topic of Elecraft and it's relevance
to other equipment and gear. There are forums elsewhere for doomsday,
climate change and the green people. I really enjoy hearing about the
experiences with the gear. The great wit I have seen here and the
information
Sorry no interest here.
73, WB4YAL
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
I still sometimes forget to _read_ the front panel display. Not quite
the same as the old way of looking at a knob pointer! But the K3s is
certainly in a different league from those old rigs.
Ron WA2EIO
On 5/1/2017 11:44 AM, Bill Frantz wrote:
Add me to the idiot group. I was operating
Add me to the idiot group. I was operating from Kings county in
the California QSO party on 10M SSB. Someone responded to my CQ
and commented that I'd probably get more responses if I was
operating USB. Sure enough, I was in LSB. I Thanked him and
fixed the problem.
I think what had happened
No thanks.
Mike KD8RQE
In a message dated 5/1/2017 9:51:49 A.M. Eastern Daylight Time,
va...@portcredit.net writes:
Someone did change this to OT, but it really isn't.
As others have also mentioned is that this is a list that is heavily
diluted by so many OT issues.
This is the only
I think the Elecraft group is fine but that many of the OT subjects can better
be handled on groups for those subjects. For example most of the NVIS
discussion could have been on the Tower Talk group.
Simple solution would be for this group to stay more on the Elecraft topic.
--
Jim
On 2017-05-01 08:05 AM, Michael Walker wrote:
I am thinking of starting an Elecraft email forum that would focus only on
Elecraft equipment.
While I like this list for the Elecraft discussions, about 50% of it is
related to off topic items and they flood my inbox with hundreds of emails.
I
There is already another Elecraft reflector at Yahoo.
73,
Nolan Kienitz - KI5IO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I certainly would like to see that.
This list has way too much off topic, and real questions get lost in the fog of
it all.
From: Michael Walker
To: "Elecraft@mailman.qth.net"
Sent: Monday, May 1, 2017 8:10 AM
Subject: [Elecraft]
Hi Eric
Actually, it doesn't go in in other forums to this extent. And, when it
does, it is shut down. This forum is the wild wild west. :)
I posted a list of all the forums I am a member of, and they are all focus
on their charter.
Mike va3mw
On Mon, May 1, 2017 at 10:34 AM, EricJ
Hi Jerry
This is not a moderator discussion as I am not asking them for their
permission, nor do I want to change anything they are doing or promoting.
I have discussed it with them at one point and they are pleased with how
this forum is being used. What I am looking at is an alternative.
Hi Ora...
I'm confused. You say you removed the tuner and connected the amp directly
to the transceiver?
My transceiver is connected directly to the amp at all times. The tuner is
between the antenna and the amp. Removing the tuner would connect the
antenna directly to the amp (ok if a good,
I recently encountered an odd problem which I thought I would share in case
anyone else experiences it. My KPA500/KTA500 combo refused to work on 20
meters. It appeared that the amp was not keying, but only on this band. I
suspected a problem in the amp, but when I removed the tuner and
https://assets.dnainfo.com/photo/2016/9/1474052916-273347/extralarge.jpg
- Original Message -
From: "Wes Stewart"
To: elecraft@mailman.qth.net
Sent: Monday, May 1, 2017 12:45:56 PM
Subject: Re: [Elecraft] Elecraft Equipment chat group
Count me out.
On
with over 20 reflector folders under RADIO which auto sort upon arrival,
count me out
bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I feel like a idiot, Ted was right upper side band had flipped to lower side
band. I guess that you always miss the obvious and make things too difficult
when not needed. I need to find why it happened as 15 meter also had flipped.
Thanks to all who gave suggestions, I placed those on my "When
Not a chance. Frankly, as a K1 and K2 owner, all the *K-line* posts are
OT to me. But there hasn't been an OT topic on this reflector that I
didn't find informative. This is a very tech savvy and interesting
group, and I value their input. It takes a long time to build a viable
community of
I'd suggest taking this off list directly to the list mods.
While your opinions are important; the community in it's entirety is
governed by Elecraft. Complaining to the list only results in a flurry of
'me too' or 'not me' posts that further exacerbate the issue.
On the air we ignore people that
Hahahahaha. It stimulates the blood and gets what's left of the fire in
the boiler stirred up.
On 05/01/2017 01:35 AM, Edward R Cole [via Elecraft] wrote:
> I'll probably get flamed with this comment (oh what the heck):
Joking aside, all of the State and Federal agencies are preparing for a
It is getting out of hand.
We just had about 50 emails on RACES and MARS. Even Eric told everyone to
shut it down as a moderator, yet everyone ignored him. It seems (and I
haven't measured) that we are 50/50 off topic to on topic.
For those that would prefer to stay try to Elecraft equipment
Been there done that already. Tried that a couple of years ago... got 8 new
users, including Wayne, and there were no exchanges. It is one more list.
Doesn't work.
73,
Bill
K9YEQ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Rhodes
Nope, why reinvent the wheel?
W4CWZ
On 5/1/2017 9:42 AM, N2TK, Tony wrote:
Nope, not interested in a new forum.
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft
Hi Mike,
I've seen this attempted with other forums for other topics. Inevitably,
the OT emails reach the same level in the new forum as well. It's just
human nature.
For my part, I'll stick with this Elecraft forum.
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original
Nope, not interested in a new forum.
I agree some topics stretch the interest quite a bit for an Elecraft
subject. But many times I learn something. And If I have no interest or get
bored with a subject I just use the Delete key.
73,
N2TK, Tony
-Original Message-
From: Elecraft
Someone did change this to OT, but it really isn't.
As others have also mentioned is that this is a list that is heavily
diluted by so many OT issues.
This is the only list that I am part of that varies like a club meeting.
And, that is OK, it just isn't OK for all of us.
For those that have
Not me either.
Not while I have a working delete key.
That plus lots of the "OT" threads are quite interesting.
Charlie k3ICH
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John
Lemay
Sent: Monday, May 01, 2017 9:29 AM
To: 'Elecraft@mailman.qth.net'
I'm sure we don't need another Elecraft group - what we do need is more
respect from those who think this is a place to post almost anything OT.
Count me out.
John G4ZTR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Michael Walker
Sent: Monday,
Thanks Joe, I do have two of the ARRL Antenna Books but wasn't familiar
the other references. I'll be sure to look them up.
I'm currently using a multiband dipole that has really impressed me
given it's poor location and setup. It's obvious I need an "antenna tool
kit". That would be very
Without a doubtcount me out!
Sometimes it is true that off topic discussions persist way too long, but we
just have to keep in mind that these guys own and are responsible for
running a profitable company and we should be grateful that they even have
any time to occasionally monitor this
Erik,
I'd suggest that you get a really - good - camera. That is a
1080P High Def one that produces good detail. So many "security"
cameras provide such poor detail that an individual or specific
automobile (much less a tag number) can hardly be identified.
Jim W4RKS
Count me in for a new group! With all the NVIS-CB-Earthquake stuff and
other O.T. posts, I'm outtta here.
As a new Elecraft owner, I signed on to learn about Elecraft. I asked a few
questions about my Elecraft gear, got some good answers and supportive
replies.
But now there's too much
With this one we get "official" information when things happen. So most of
us would remain on this reflector for that. Why would we want to then join
another list to further dilute the information content. Count me as a no.
Jim Rhodes
K0XU
On May 1, 2017 07:59, "Stephen Prior"
Count me out too.
73 Stephen G4SJP
On 1 May 2017 at 13:45, Wes Stewart wrote:
> Count me out.
>
> On 5/1/2017 5:05 AM, Michael Walker wrote:
>
>> How many of you would be interested?
>>
>>
> __
> Elecraft
No interest here.
73
Ken - K0PP
On May 1, 2017 06:07, "Michael Walker" wrote:
> Hi All
>
> I am thinking of starting an Elecraft email forum that would focus only on
> Elecraft equipment.
>
> While I like this list for the Elecraft discussions, about 50% of it is
>
Count me out as well. I just stick to this forum.
寄件人︰ Wes Stewart
收件人︰ elecraft@mailman.qth.net
傳送日期︰ 2017年05月1日 (週一) 8:47 PM
主題︰ Re: [Elecraft] Elecraft Equipment chat group
Count me out.
On 5/1/2017 5:05 AM, Michael Walker wrote:
> How many of you would
Count me out.
On 5/1/2017 5:05 AM, Michael Walker wrote:
How many of you would be interested?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hi
I´m in
PY5EG - Oms
-Mensagem original-
De: Elecraft [mailto:elecraft-boun...@mailman.qth.net] Em nome de Michael Walker
Enviada em: segunda-feira, 1 de maio de 2017 09:06
Para: Elecraft@mailman.qth.net
Assunto: [Elecraft] Elecraft Equipment chat group
Hi All
I am thinking of starting
I updated the subject as OT:
http://www.arrl.org/amateur-code
The Radio Amateur's Code
The Radio Amateur is
CONSIDERATE...He/[She] never knowingly operates in such a way as to lessen
the pleasure of others.
LOYAL...He/[She] offers loyalty, encouragement and support to other
amateurs, local
Hi All
I am thinking of starting an Elecraft email forum that would focus only on
Elecraft equipment.
While I like this list for the Elecraft discussions, about 50% of it is
related to off topic items and they flood my inbox with hundreds of emails.
How many of you would be interested?
73 all,
I'll probably get flamed with this comment (oh what the heck):
How many of you theorizing about a 9.0 Richter earthquake have
actually experience one! I not talking about 5 pr 6 or 7 an actual 9+
Why don't you ask an Alaskan Ham? In 1964 south central Alaska
experienced a 9.2 (2nd
I took it down to 5 watts pronto before I started reconfig. Roger that
on the dementia also. One step at a time. One day at a time. My sincere
gratitude. I'll keep you posted.
73
Stan
KG7FYI
-.- --. --... ..-. -.-- .. ><º>
On 04/30/2017 09:39 PM, Don Wilhelm [via Elecraft]
73 matches
Mail list logo