W1AW/6 the special event station for Pacificon is on 7230 and 3865 at the
moment.
73 de AI6KG
On Oct 19, 2017 7:47 PM, "Bill Johnson" wrote:
> Wayne, please record and post the symposium, if you, can as I am intensely
> interested, but cannot intend to do logistics.
>
>
> 73,
>
CW operators and bug key users, I haven't posted this blurb on the "Dot
Stabilizer" I make for about a year so I decided to make a Christmas
price reduction effective immediately and it will continue until
December 31, 2017. Please send any inquiries direct to me rather than
post them to the
Totally untrue!
Where did you get this information. I have many FT-8 contacts in DATA mode.
AFSK A and FSK D modes are LSB modes for RTTY.
DATA A and PSK D are USB modes for PSK and DATA A works with other USB modes
like JT65 and FT8.
.
Sent from my iPhone
...nr4c. bill
> On Oct 20,
Thanks for the info and update.
73
Bob, K4TAX
On 10/20/2017 3:20 PM, Mark E. Musick wrote:
John,
I was informed here on the reflector. I think it was Wayne that sent the
e-mail describing the mods. It is also on the website in the K3/K3S mods
section.
Here are the mods and I think this will
Subject: K3, KPA 500, KAT 500 & LP-Pan for sale
Anyone interested in purchasing an Elecraft station or individualcomponents
please drop me an email at lgs42...@yahoo.com. I will replywith more info and
pictures.Tnx & 73 Lou KI6UM
Postmaster please delete previous email. Here is
Bob,
Select the K3 in Hamlib if the KX3 is not present in the selections.
Other than that I cannot help much with the computer end setup.
FT8 is no different than other soundcard data modes.
On the KX3 part, set the DATA mode to DATA A. Ignore the common
internet advice for setting the audio
Anyone interested in purchasing a Elecraft station or individualcomponents
please drop me an email at lgs42...@yahoo.com. I will replaywith more info and
pictures.Tnx & 73 Lou KI6UM
__
Elecraft mailing list
Home:
New to FT8 and KX3 operation.
I cannot seem to get them communicating. Error message hamlib failure.
Suggestions?
Bob KI0G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hello group,
Thanks for all the replies and help. I found out that problem was me. I had
LP-PAN and a creative soundcard (external emu-202) in line with my k3 along
with my navigator interface. Disconnected the LP-Pan and external sound card
and all is working great.
Just a senior moment and to
Yes, the techs at Elecraft are well practiced and quite efficient.
They also run it through the automated checkout line for you.
Well worth the cost IMHO.
73,
Don W3FPR
On 10/20/2017 4:29 PM, Mark E. Musick wrote:
Yes, Don they did charge me the $99 one-hour fee, but I did have some repair
Hi Peter,
You can sequence macros so that one PF button does two different functions but
the two different functions still require two macro positions. The trick is at
the end of each macro you reprogram the function key to point to the other
macro. The means you have to use a PF key on the
Yes, Don they did charge me the $99 one-hour fee, but I did have some repair
work done on the sub-receiver. So, it took them one hour or less to repair the
sub-receiver and put the mods in.
73,
Mark, WB9CIF
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent:
Hi all,
We're excited that the QRPworks SideKar and K-Board have been reviewed in
the recently published Product Review issue of QST (Nov. 2017). Actually,
we're more than excited, as you can imagine.
If you haven't seen it and would like to, it's on our website, with
permissionm from the ARRL:
John,
I was informed here on the reflector. I think it was Wayne that sent the
e-mail describing the mods. It is also on the website in the K3/K3S mods
section.
Here are the mods and I think this will answer Bob's, K4TAX question as
well.
The repair report says the following:
IMD improvement KLPA
As Wayne N6KR mentioned yesterday,
"I’ll be speaking at Pacificon's antenna symposium tomorrow (Friday, Oct.
20th). My presentation, from 3:30 to 4:30 PM, is on antennas for
ultra-portable HF operation. This talk was a late addition, a previous
speaker having dropped out.
If you’re interested in
Hi Robert,
Data A does use USB which is normal for all digital modes except RTTY. For
RTTY you should use AFSK A which is LSB. Of course, there is also FSK D for
transmitting RTTY.
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net
Mark,
I don't believe those mods will be done for free, but there may be a
special pricing on them if that is all the work to be done.
If you have other repair work done on your K3S, they will be installed
as part of that process.
73,
Don W3FPR
On 10/20/2017 11:44 AM, Mark E. Musick wrote:
Robert,
There are 4 data submodes in the K3. DATA A is for soundcard digital
and is the default sideband same as USB except that compression is
turned off and any Equalizer settings you might have for SSB are set to
flat.
AFSK A is specifically set with defaults for RTTY from a soundcard -
WHAT IS THE AX1 THAT I HAVE READ COMMENTS ABOUT. ARE THERE FURTHER
DESCRIPTIONS OR PHOTO'S RE THIS ANTENNA?GERRY MILLER, aa...@juno.com
1 Simple Trick Removes Eye Bags & Lip Lines In Seconds
Fit Mom Daily
On 10/20/2017 1:10 PM, Robert . wrote:
> For ft8 jt65
> Mode must be USB
Not true. One should use DATA A which transmits as USB but disables the
compression and TX EQ.
> Data modes on k3 are setup for rtty
DATA A is correct for FT8/JT65/JT9 as well as PSK31/PSK63/PSK125 and any
other audio
Hi Peter,
The KPod doesn't actually store any macros. It basically gives you 16
programmable function keys in addition to the 10 available on the front panel
of the K3s. The only macros it can activate are the 16 that you can store in
the K3s using the K3 Utility.
One way to add more is to
I have an early K3S and I am unaware of these factory mods. What are
they? How are owners notified?
John KK9A
Mark, WB9CIF wrote:
John,
The order date of my K3S serial #10629 is January 28, 2016. So, I'm guessing
your 105xx order date would be, depending on early 5xx or late 5xx, December
Data A is absolutely the correct mode for JT65 & 8. You don't want any comp or
TX EQ you have with sideband.
73,
Josh W6XU
Sent from my mobile device
> On Oct 20, 2017, at 10:10 AM, Robert . wrote:
>
> For ft8 jt65
> Mode must be USB
>
> Data modes on k3 are setup for
For ft8 jt65
Mode must be USB
Data modes on k3 are setup for rtty
Best I recall
73 Robert W5AJ
On Oct 20, 2017 09:39, "haircut...@verizon.net"
wrote:
> Hello Group,
> Must be getting old. I am trying to get my k3 to transmit digital, but not
> having any luck.
> I am
John,
The order date of my K3S serial #10629 is January 28, 2016. So, I'm guessing
your 105xx order date would be, depending on early 5xx or late 5xx, December
2015 or January 2016.
Be aware John that the early K3Ss, lower than serial # approximately 10700
or 10800 (I don't remember the exact
Hi all,
I have a bit of a dilemma when it comes to macros and my K3s. I own a kPod
that's fully loaded with 16 always-used functions. I just developed two more
that I will use on a very regular basis, but I have no way to command them
into the radio now. The RS-232 port on the P3 is needed to
Don,
How do you have the soundcard connected to the K3? What soundcard are
you using?
Are you using the Line In jack on the back of the K3?
If so, do you have MIC SEL set to LINE in Data A mode?
You might plug the cable you have connected to K3 LINE IN to an audio
amplifier or computer
Don -
I had exactly the same problem and got it going a couple of days ago,
thanks to help from W4TV on the microHAM list.
The 'magic' setting that got things going for me was to go into the K3 Main
Menu, while the radio was in the DATA A mode, and find MIC SEL and set it
to LINE IN.
Then exit the
Hello Group,
Must be getting old. I am trying to get my k3 to transmit digital, but not
having any luck.
I am using wsjt-x. Receives great, but cant get my k3 to transmit. have the
k3 set to data-a and the vox is on. Mic gain doesn't do anything. Am I
missing a setting somewhere.
Help would be
That’s exactly what I did with my K3 (late s/n)!
Now it’s almost a new K3S!
73’s
Fernando, PY1BL
Sent from my iPhone
> On Oct 20, 2017, at 1:13 AM, Byron Servies wrote:
>
> They are all <2 years old, being (iirc) announced in 2015 and shipping
> in 2016. Maybe < 1.5 years.
>
Thanks for all the replies.
Mike, W4UM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
31 matches
Mail list logo