I was just wondering whether any of the K5 Beta Testers have taken out
KF1VE as a vanity callsign?
73 de David G4DMP
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax, Leeds.|
| Website: https://www.g4dmp.co.uk |
+ - - - - - - - - - - - - - - - - +
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Several years ago I had a problem with one of my K3 encoders and
obtained a replacement E850239 from Elecraft under warranty. However, I
noticed that the two halves of the encoder had started to separate. They
were held together by small aluminium rivets. By carefully removing the
rivets, one
Josep - If you do not have the DVR installed in your K3, go to the
Config Menu and check the KDVR3 entry. It should say 'not inSt'. If it
says 'nor' then turn it to 'not inSt'.
I hope that solved the problem.
73 de David G4DMP
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax,
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I would like to thank Don, Mike and Peter for responding to my plea for
help for an XV transverter crystal oven.
I never cease to be amazed at the help given on the Elecraft reflector
which is second to none. Thank you gentlemen.
73 de David G4DMP
In a recent message, David Pratt writes
I would be pleased to hear from anyone who has a crystal oven for the XV
series of transverters. The Elecraft part number is E980076. The oven
in my XV144 has gone open circuit.
I have attempted to search the Elecraft website for one without success
and have even entered an enquiry but have had
I am wishing to buy an XV432 transverter for use with my K2. If anyone
has one which they no longer need, I would be pleased to hear from them.
73 de David G4DMP
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax, Leeds. |
| Website: http://www.g4dmp.co.uk |
+ - - - - - - - -
I would love to go back to 1955, Wayne, using homebrew equipment, when I
was first licensed (as G3KEP) and we used condensers instead of
capacitors.
Even in 2000 when I built my first K2 MoJo, I only had to press the key
and got a pileup calling me.
Nowadays, with the advent of PLT, CFL & LED
I am not sure that many people would need one in Europe, Tony. At
least, in the UK we are only licensed for 26dBW (400W) so the KPA500
would be more than adequate.
73 de David G4DMP
In a recent message, Tony G6GLP writes
>Its great to hear the major shipping has started of
I am delighted to report back that changing the wire from pin-5 to pin-6
has done the trick. DTMF tones work fine on the K3 as do also the UP and
DOWN buttons with MIC BTN On in the CONFIG menu. The DTMF tones also
work on the K2.
What is surprising, however, is that everything works equally
ctret? Most are dynamic. Make
> certain the mic plug is wired for standard Kenwood pinout for HF mics,
> Some made for VHF rigs may be different.
>
> 73,
> Don W3FPR
>
> On 2/7/2018 9:47 AM, David Pratt wrote:
>> In an archived message Lyle KK7P said .
In an archived message Lyle KK7P said .
> Currently, use of a DTMF-equipped microphone or generating the tones
> with an attached device. The K3 does not generate DTMF tones,although
> it could in a future firmware enhancement.
>
> 73,
>
> Lyle KK7P
Well, in the absence of the long awaited
Regrettably, after 17 years as a member of this group I am now
unsubscribing as nowadays there are so few messages of relevance to
those of us in the UK and the developed world.
Any queries I have on Elecraft products will be made by direct mail to
Eric, Wayne, Don and to Elecraft support.
73 to
Last month the latest edition of Amateur Radio Licence - Guidance for
licensees was published by Ofcom. I normally print this out as an A5
booklet and keep it by me to refer to in conjunction with my amateur
licence. It is a very useful document.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Thank you, Fred. Having one of the CNC knobs on my K3, I had forgotten
about that. I did not realise it was causing such an issue.
73 de David G4DMP
In a recent message, Fred C. Jensen <k6...@foothill.net> writes
>My K3 has one, it's around the Big Knob.
>Fred K6DGW
>Sparks NV
Excuse my ignorance, Tim; maybe I am being naive, but could you explain
to which Elecraft products you are referring? I do not know of any 'O'
rings in any of my Elecraft transceivers.
73 de David G4DMP
In a recent message, "k...@juno.com" writes
>
>A long time admirer. For me,
In a recent message, "etks...@gmail.com" writes
>When you are logging to paper and have the radio clock displayed for
>the specific purpose of having a handy UTC clock it's annoying when
>it's off. The KXBC3 is marketed as a battery charger and RTC, and I
>bought it for both.
Many thanks, Joe and Don, for that useful information which I shall keep
in mind. I would, however, like to continue using my D104 microphone
with which I receive outstanding good quality reports.
73 de David G4DMP
In a recent message, Don Wilhelm writes
>I agree with
Do you know whether there is any progress on this, Lyle? I have been
struggling with a handheld DTMF device, held close to the K3 microphone
for years! It is somewhat cumbersome and I look forward to the long
awaited DTMF feature on the K3 which I think has been on the software
list for
You will have to wait until the Dayton hamvention to find out.
73 de David G4DMP
On Tue, 12 Apr 2016 09:49:31 -0400
Dan Atchison via Elecraft wrote:
> The MB1 Transceiver
>
> http://sunsdr.eu/product/mb1/
>
Andy - Without the K3EXREF connected, the REF CAL frequency will be
fixed and the K3 will drift, albeit very slightly, particularly when it
is first switched on. With K3EXREF locked with your 10MHz standard the
REF CAL frequency will vary to correct any drift in the K3. If you
measure the output
Yes, you could be missing something, Tighe.
There is an addendum to Page 4 which reads:
After installing the K3EXREF module, you must enable it in the K3 menu
before it can be used if your K3 is equipped with MCU firmware 4.57 or
later.
Enable the K3EXREF module as follows:
* Turn the K3 on.
G4DMP
David Pratt on his Nexus 7 tablet.
On 28 Jan 2016 04:44, Ken <wa8...@gmail.com> wrote:
>
> Great idea!
>
> --WA8JXM
>
> On 1/27/16 8:45 PM, Dave Cole wrote:
> > It would be so cool if the Elecraft clock set itself when I tune to
>
What is wrong with the sound, John? Are you getting distortion? Could you be
more specific and then someone should be able to assist you.
73 de David G4DMP
David Pratt on his Nexus 7 tablet.
On 16 Nov 2015 16:19, John Veach <k...@att.net> wrote:
>
> When I had my KPA500 I never r
What is the serial number of your transceiver and do you have a callsign?
Also, what revision of the manual do you have? With that information there are
lots of people on here able to help you.
73 de David G4DMP
On 30 Sep 2015 04:29, way235 wrote:
>
> I have noise on all
In a recent message, Rick Ross writes
In Yahoo groups have set Mail Subscription to NO EMAILS and even
UnSubscribed to KX3 Yahoo Group but continue to get EMails.
But the Elecraft reflector is NOT a Yahoo Group, Rick. To remove
yourself from it you need to follow the
On 28 Sep 2015 05:52, Matt Zilmer wrote:
>
> The blood moon was pretty fantastic from Montrose, CO.
>
How did it affect radio conditions, Matt, particularly as regards noise and on
which bands? Were you using the new Synth boards?
73 de David G4DMP
'Nuff said here. I'll be more than happy to engage in private
discussion,--
Please do just that. This is of no interest to me and I am sure nobody would
want me to start a discussion about Ofcom in the UK.
David G4DMP
__
Michael - You don't need a computer to send and decode PSK31 and CW.
Provision for decoding and sending PSK31 and CW are already built into
the KX3 firmware. All you need to do is to plug a paddle into your KX3
and set up the menu accordingly and you're away.
73 de David G4DMP
On 09/06/2015
On 15 Feb 2015 19:18, David Ferrington, M0XDF m0...@alphadene.co.uk wrote:
Hmmm - what about us iMac lovers?
Upgrade to a PC. That would solve a lot of compatability problems.
73 de David G4DMP
__
Elecraft mailing list
Home:
That would be no good to me, Ken, WWVB is not receivable in Great Britain. We
would need MSF on 60 kHz. Remember that the KX3 K3 are global transceivers
used throughout the world.
73
David G4DMP
David Pratt on his Asus Nexus 7 tablet.On 15 Feb 2015 18:24, Ken G Kopp
kengk...@gmail.com
I have just measured my K144XV power output with an accurate power output meter
and find that with the K3 set for 1mW the output is 10.5W. But setting the K3
to 0.1mW (fully counter-clockwise) the output goes down to only about 7W. No
matter what I do, I am unable to reduce the power further.
Where have you read that, Hans? Looking through the Region 1 papers and also
the agenda for WRC-15 I can find no reference to the 4 metre band. The only
thing that could affect the K3/KX3 would be the band within 5250 and 5450 kHz.
At present the K3/KX3 will only transmit up to 5420kHz. For
.
David Pratt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
The moral there is not to ask too many questions.
David Pratt G4DMP
On 18 May 2014 18:33, David Woolley (E.L) for...@david-woolley.me.uk wrote:
Although Elecraft may get away with it, a lot of equipment that is CE
marked has final assembly stages that have to be done after unpacking
Yes, Dennis, you may indeed operate on the 70.0-70.5MHz band when
operating in the UK under the terms and conditions of the CEPT Licence.
For Full Licence holders the maximum PEP is 160 Watts (22 dBW) and for
Intermediate Licence holders the maximum PEP is 50 Watts (17 dBW). The
band is
I am sure that if you e-mail sa...@elecraft.com and remind them, they
will be pleased to oblige.
In a recent message, W0FK llader...@earthlink.net writes
Have any price inreases gone into effect yet? It doesn't appear to me that
they have on the products I've looked at.
73,
Lou, W0FK
--
+ -
are as follows:
5330.5, 5346.5, 5357.0, 5371.5, and 5403.5 kHz.
David Pratt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I have my K3 and want to go mobile HF,
have been looking for a TS480HX. Willing to trade K2-100, SSB from a
non-smoking home.
David Pratt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
And well worth doing too. Drift from 2C to 45C is now less than 5Hz.
73 de David G4DMP
On 18 Mar 2014 03:50, Phil Wheeler w...@socal.rr.com wrote:
Done. It does take more than the nominal 30 min --
more like 90-120 min. But it's done.
David Pratt
On 18 Dec 2013 06:40, W0WFH Bill w0...@yahoo.com wrote
Please respond to me off forum. w0...@yahoo.com
Please reply on here; I would be interested too.
73 de David G4DMP
David Pratt
__
Elecraft mailing list
Home: http
I am reluctance to reply on here as the reflector seems full of trash
these days. But yes, John, I wholeheartedly agree with you; the DL1 is
excellent and well worth buying at that price. Rated at 20W it is ideal
for setting up the K1, K2, KX1, KX3 and K3/10.
73 de David G4DMP
On 24/08/2013
I agree, John, I do find that my K3 does not appear to save its ATU
settings and seems to do a complete retune each time I press the ATU
TUNE button.
73 de David G4DMP
In a recent message, John Oppenheimer j...@kn5l.net writes
Will the recent KX3 ATU Improvements also be added to the K3?
In a recent message, Mark Petiford rv6am...@yahoo.com writes
And the purpose of this database is...???
It gives and indication of those who are proud to be owners of Elecraft
equipment compared with those who are merely 'appliance operators'.
From: David
Does the book include the KX3 features yet to be implemented, including
ESSB, CW on SSB mode and synchronous AM reception ?
73 de David G4DMP
In a recent message, kk5na kk...@kk5na.com writes
I received Fred's KX3 book today from Lulu.
First impression: EXCELLENT!!!
Joe KK5NA
--
+ - - -
Bob - The K3 manual does not give as much detail as the KX3 manual which
describes the functions as follows
Audio Signal Level AFV. This display shows the approximate level of the
audio output, prior to the AF gain control (in other words, the AF gain
control has no effect on the reading).
In a recent message, Paul M Dunphy pau...@ve1dx.net writes
Yahoo emails seem to be the common denominator!
AOL too it would appear :-(
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax, Leeds. |
| Website: http://www.g4dmp.co.uk |
+ - - - - - - - - - - - - - - - - +
In a message on 17 August 2009, Wayne Burdick n...@elecraft.com wrote
..
- We could display just about anything on the P3's LCD
..
- I'd love to demodulate SSTV with the P3, and it's on the wish-list.
..
I would be interested to know whether there is any progress on this. How
In a message on 17 August 2009, Wayne Burdick n...@elecraft.com wrote
..
- We could display just about anything on the P3's LCD
..
- I'd love to demodulate SSTV with the P3, and it's on the wish-list.
..
I would be interested to know whether there is any progress on this. How
far
Hello Dave -
What I omitted to say in my msg on the reflector was that you WILL need
the KXV3 installed in your K3. When I mentioned not needing the KXV3A I
was making an assumption that your K3 already has the original KXV3
installed. Apart from the power cable the only additional cables you
Thank you, Jim, that does make a great deal of sense. Many thanks for
taking the trouble of replying.
73 de David G4DMP
In a recent message, Jim Miller KG0KP jimmil...@stl-online.net writes
[snip]
There is no doubt that the LEDs they were getting in 2004 have been
discontinued with brighter and
Replied privately to cut down on off topic QRM
In a recent message, Jim Lowman jmlow...@sbcglobal.net writes
Actually, David, I'm interested in not only the UK exams, but also the
callsign
assignments; i.e. G vs. M vs. 2
73 de Jim - AD6CW
On 9/1/2012 1:08 AM, G4DMP wrote:
You may well
Phil - Have you tried re-installing the Front Panel firmware? Just a
thought.
73 de David G4DMP
In a recent message, Phil Debbie Salas dpsa...@tx.rr.com writes
BTW - I can switch bands using the buttons on my KPA500, and it transmits
fine. Just front panel button problems.
--
+ - - - - - -
There is an excellent book: Radio Rescue by Lynne Barasch, which is
ideal for introducing kids of this age to the thrills of ham radio. It
has several good reviews on the web and is available from Amazon. It's
rather expensive new, but is available quite cheap as a secondhand item.
It doesn't
I can never understand why people spend hundreds of pounds on Heil
headsets and similar when inexpensive computer headsets give such good
results.
73 de David G4DMP
In a recent message, Graham Kimbell G3TCT g3...@lineone.net writes
I have been using a computer style headset and mic bought from a
In a recent message, Vic Goncharsky us...@yahoo.com writes
Are XV432 kits still avaliable?
WTB and assemble one before IARU R1 UHF championship in October
Yes, Vic, you can see them listed at...
http://www.elecraft.com/elecraft_prod_list.htm#xvs
73 de David G4DMP
--
+ - - - - - - - - - - -
I see what you mean, Vic. I think your best bet is to e-mail Eric and
ask him. He ought to make it clear on the website whether it's a kit or
ready built. There should of course be a difference in price.
Like you, I like building stuff, would not consider buying a ready built
rig and was a bit
I have recently modified an Elecraft XV50 external transverter for use
on 4 metres and have prepared some notes on how I did it. These notes
may be of interest to anyone who is licensed to operate on the 70 MHz
band.
http://www.g4dmp.co.uk/XV70mods.pdf
73 de G4DMP
--
+ - - - - - - - - - -
I am using the internal K144XV 2-metre transverter at VFO B and an
external XV50 (modified for 4 metres) at VFO A.
Switching in the SUB I can hear VFO A (4 metres) okay but, although I
can hear the K144XV noise level when advancing the SUB RF AF gain
controls, I do not hear any signals. I do
Thank you, Olli, that is useful to know.
73 de David G4DMP
In a recent message, Oliver Dröse dro...@necg.de writes
Hi David,
in standard configuration you can only use one transverter at a time,
no matter if internal or external (the internal K144XV is switched from
the same XV3A board as the
In a recent message, Jim Bennett w6...@mac.com writes
Please tell me that there really IS a Mac version of the firmware and
where I can find it.
Your original e-mail did appear on the reflector okay, Jim. I've had a
look at all possible sources but, like you, am unable to find a K144XV
utility
That is a good idea, Dale, and I would also find that useful. However, I
doubt it will be possible as the USB connector is used for the keyboard.
Using a USB hub on the P3 would certainly be a challenge for the
designers.
73 de David G4DMP
In a recent message, Dale Boresz d...@lightstream.net
Toby - Are you referring to the K3, KX3 or the P3/SVGA/USB ? Please add
this on the Subject line.
I have successfully programmed Macros into my K3 from the USB keyboard,
but I agree there are limitations with the documentation. However, do
bear in mind that it is beta firmware and any
Mike - It sounds as though you have not read the PDF file that is
contained within the P3/SVGA/USB beta zip file. That explains about the
asterisk under the Status Bar paragraph and all you need to know to get
it working. Read that, Mike, and preferably print it off and you'll be
away.
David
You will enjoy your K1, Stan; I built one many years ago and it went
together like a treat. The only decision to make is which bands to
install and which tuning range capacitor to use. But you can always
change the tuning range later as both capacitors are provided in the
kit.
BTW, this not the
4.51 is definitely there, Paul. Make sure your K3 Utility is pointing
to the right directory. ftp://elecraft.com/K3/firmware/
73
David G4DMP
In a recent message, Paul VanOveren p...@nf8j.com writes
I saw a couple of references here on the reflector about the 4.51 Beta
firmware now being a
Hear, hear. Dealings and service from Waters and Stanton leave a lot to
be desired :-(
73 de David G4DMP
In a recent message, Geoffrey Downs geoffre...@madasafish.com writes
It's not necessarily excellent news for the UK. I for one would prefer to
continue dealing with Elecraft rather than a
I have also missed the 4.51, and even the 4.50 release. The only beta
file I can find on the FTP site is 4.48, but 4.48 has also been
officially released. Has the FTP folder for beta releases been changed?
David G4DMP
In a recent message, Matt Murphy m...@nq6n.com writes
I seem to have missed
See many earlier posts about the relative merits of RS-232 and USB
interfaces. They have been discussed many times before. If your
desktop does not have a serial input, fit one. If you use a laptop or
notebook computer, get a USB to RS-232 cable.
73 de David G4DMP
In a recent message, Pete
Having said that, Adrian, so many people still call the K3 a 'radio'
rather than a transceiver.
In a recent message, Adrian vk4...@bigpond.com writes
Yes Gary, Elecraft made the K3 CB Proof, lets keep it that way, no roger
beeps thanks.
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt,
Steve - Look at page 99 of the latest (Rev H) manual. The section on CW
Operation shows how the two keys may be connected at the same time. You
might find that a small capacitor connected across the straight key
necessary depending on how much RF you have flying round the shack.
73 de David G4DMP
In a recent message, Julie Royster jsdroys...@bellsouth.net writes
Larry K4MWE and I are hearing lots of distortion (clipping probably) on the
K144XV tuned to local repeaters for anyone with strong signals. Weak
stations are OK.
Julie - What you say suggests that the strong signals going through
Just my opinion having used both, Steve, but if you are primarily a CW
operator I think you would be better off with the KAF2.
73 DE David G4DMP
In a recent message, Stephen Roberts steve...@shoreham.net writes
Well going from a rather ancient Ten Tec to a K2 has been a real treat
for sure, and
Another thing that make me cringe is the use of 'radio' to mean a
transceiver or rig. I first heard this on CB like 'keying the mike',
long before CB was around in the UK. I remember Eric saying that the
XV144 would work on any radio. I could never get it to work on my old
Philco.
For
In a recent message, Paul Saffren N6HZ pa...@elecraft.com writes
Unfortunately there is no way currently to key the XG3 directly from an
external key or keyer.
currently, Paul? Does that imply that there could be a means of
externally keying the XG3 in the future?
73 de David G4DMP
--
+ - - -
I whole heartedly agree with your there, Dick. Unless one has physical
shortcomings, it is much better to build one's own Elecraft equipment.
This is borne out by many elementary questions appearing on the
reflector from people who have not assembled their own gear. Had they
built it themselves,
In a recent message, David Gilbert xda...@cis-broadband.com writes
I'd offer the opinion that crisp operating
practices learned in contesting beat casual roundtable chats with
friends hands down.
Crisp they may be, but at least with roundtable chats you do get
genuine reports. This 5NN stuff
I see from the report of WRC-12 that a new band 472-479kHz is to be
allocated on a world-wide basis with an eirp of 5W (1W in some
countries). The K3 receiver currently goes down to 490kHz. Is there
any likelihood that this could be extended down to cover the new band?
I very much doubt that Elecraft would be interested in producing such a
device, Trevor, particularly as similar VLF up converters are already
available. My query was really questioning whether the existing K3
could be adapted for the forthcoming new band.
73 de David G4DMP
In a recent message,
In a recent message, Jim Miller j...@jtmiller.com writes
can't reach the fists.org website. anyone know what's up?
Try http://www.fists.org.uk Jim. That works okay here.
73 de David G4DMP
Fists No.: 13240
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax, Leeds. |
| Website:
Try pressing ANT. It looks as though you have the wrong antenna
selected on 40 metres.
73 de David G4DMP
In a recent message, Dave Zeph ze...@indy.rr.com writes
Does anyone have an idea what might have gone bad and if when can be done to
identify the problem.
--
+ - - - - - - - - - - - - -
A 2-tone test is already built into the K3, Matt. I'm afraid it's a case
of RTFM.
Enter the Config menu and look for 2 TONE
73 de David G4DMP
In a recent message, Matt Murphy m...@nq6n.com writes
If using a two tone oscillator is the best way to tune a tube amp, would it
be possible for the
Unfortunately, Dwight, the previous owner has not added #3095 to the
Elecraft Owner Database at
http://www.zerobeat.net/qrp/elowners.html
There are some near that serial number dated around May 2010.
I hope that helps. You might like to add yours to the database.
73 de David G4DMP
In a recent
I have never had such problems with my K2 which uses a front
panel/control unit coupled to the main board with connectors.
It does seem a design modification is desirable for the K3.
73 de David G4DMP
In a recent message, Gary VK4FD garyvk...@gmail.com writes
With several known issues with
Richard - If you have deleted yesterday's messages you can always check
back by looking at the archives. Details are on the Elecraft website.
73 de David G4DMP
In a recent message, Richard Thorpe kis...@me.com writes
Did I read on the reflector that there was to be a K3/P3 firmware
upgrade
In a recent message, Don Wilhelm w3...@embarqmail.com writes
You send the AS prosign as
didahdididit, KN as dahdidahdahdit, etc.
Forgive me for making a slight correction to that, Don, but KN is not a
prosign but is defined as a left-hand bracket in the latest
recommendations of the ITU. The
The K1, K2 and XV series of transverters were a distinctive dark grey
(gray) by which the mojo Elecraft products were easily identified.
Unfortunately, things turned to black when the KX1 was introduced.
Despite black often being associated with death, Elecraft gave its
reasons at the time.
Nidge - I have recently bought a Power-Sonic PS1221 12V 2.1Ah battery
from www.battery-force.co.uk It is physically the same size as the
PS1229 but of lower Ah. It works perfectly in my K2. It will cost you
15.44 including vat and PP.
73 de David G4DMP
In a recent message, Nigel (Nidge) Smith
Bob - Try
http://www.inrad.net/product.php?productid=336cat=163page=1
It seems that plugs are available in packs of eight for $6.
73 de David G4DMP
In a recent message, Robert Dorchuck W6VY w...@yahoo.com writes
There was a thread last year looking for a source of TMP connectors.
Did
I am getting a 'feature' with my P3 when using RIT. I find that the RIT
frequency deviation displayed on the P3 is twice that of the RIT
deviation displayed on the K3. As far as I am aware I have the latest
firmware installed on both my K3 and my P3. Is this a know bug or do I
have a fault
and the (red)
cursor is 2 KHz away from the green cursor.
73,
... Joe, W4TV
On 10/31/2011 1:50 PM, David Pratt wrote:
I am getting a 'feature' with my P3 when using RIT. I find that the RIT
frequency deviation displayed on the P3 is twice that of the RIT
deviation displayed on the K3. As far
P3: 1.09
K3: 4.42
In a recent message, Joe Subich, W4TV li...@subich.com writes
What version of the firmware? It is quite repeatedly correct here.
73,
... Joe, W4TV
On 10/31/2011 4:58 PM, David Pratt wrote:
Yes, quite sure, Joe, and I have had off list replies from others who
It already is, Jim; it's called the K3, currently available for
immediate despatch. For QRP, order it without the 100W PA. Or maybe the
K2 if you prefer to build it yourself.
73 de David G4DMP
In a recent message, Jim Stoneback jstoneb...@comcast.net writes
I'm wondering if there is any chance
I would be interested in this too, Win. The schematics file of
11-Oct-2007 has Rev XK and the files of 13-Jan-2010, 17-Jun-2010 and
30-Oct-2010 all have the schematics of KPA3 Rev C, but Rev B is missing.
I wonder whether Rev B is the same as Rev XK ?
73 de David G4DMP
In a recent message,
FWIW, I have always found it useful to scratch the surface of the
crystals and tin them prior to mounting them on the board. It clears
any tarnishing of the cans between time of manufacture and assembly and
makes soldering easier.
73 De David G4DMP
In a recent message, Don Wilhelm
I see that Revision D10 of the K3 Owner's Manual is now available for
download. Before I print it out, one someone care to advise up to which
K3 firmware revision is included in the Manual ?
Many thanks
David G4DMP
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax, Leeds.
1 - 100 of 503 matches
Mail list logo