or install a net
clock service.
Once you have the computer and radio setup and talking to one another and you
audio drive to radio set correctly, and DATA mode should drop right in.
If in doubt, see Don’s website (wa3fpr.com) for more info.
Sent from my iPhone
...nr4c. bill
> On May 7, 2018, a
You have the RF Gain set to a level other than zero. It is a reminder the the
RG Gain is not at Zero.
Sent from my iPhone
...nr4c. bill
> On May 4, 2018, at 8:21 PM, Michael Blake <k9...@mac.com> wrote:
>
> RF Gain not turned down?
>
> Michael Blake
> k9...@mac.com
Go to Elecraft website, DOWNLOADS ( firmware) and look for the Utility. Near
there should be link for FTDI drivers for said USB cable.
Sent from my iPhone
...nr4c. bill
> On Apr 27, 2018, at 8:52 PM, Rick Tavan <r...@tavan.com> wrote:
>
> In the past I've been able to
Don’t forget if you are operating radio from battery, computer must also run on
battery if using computer to control the radio.
Sent from my iPhone
...nr4c. bill
> On Apr 27, 2018, at 7:00 PM, Rich <rwnewbo...@comcast.net> wrote:
>
> Thanks. I got it working today. Real
But it doesn’t the P3 talks to the K3 at 38,400. Weird things can happen when
mixing nauseates. Why ask for trouble.
BTW: My K3S came defaulted to 38,400.
I think the 4800 on the K3 was a carryover from K2 days.
Sent from my iPhone
...nr4c. bill
> On Apr 27, 2018, at 4:16 PM, J
which-ever of DTR/RTS
you don’t use for PTT.
Sent from my iPhone
...nr4c. bill
> On Apr 27, 2018, at 11:27 AM, Rich <rwnewbo...@comcast.net> wrote:
>
> Can this feature be used for AFSK RTTY or just CW?
>
> I am having trouble getting Writelog and the K3 to work with PTT
Set all bauds to 38,400.
Sent from my iPhone
...nr4c. bill
> On Apr 26, 2018, at 10:19 PM, John_N1JM <johnn...@gmail.com> wrote:
>
> Is the *host serial port baud rate* set correctly in the PX3?
>
> John N1JM
>
>
> Bill Frantz wrote
>> I'm sitting in
Don’t forget to cycle the K3(s) Power after making changes to Config menu.
Sent from my iPhone
...nr4c. bill
> On Apr 17, 2018, at 1:56 AM, Wayne Burdick <n...@elecraft.com> wrote:
>
> Hi Germán,
>
> You may have the KPA3 menu entry set to “not installed.” You may have
Tap the upper right button.
Sent from my iPhone
...nr4c. bill
> On Apr 10, 2018, at 10:14 PM, Fred Jensen <k6...@foothill.net> wrote:
>
> My P3 waterfall disappeared when I turned the rig on tonight. WF Height
> shows the line, and it moves with the knob, but no WF
In TX TEST mode the “TX” symbol on the right end of the display will flash
about once per second. No need to try turning it On to see if it’s on or not.
Sent from my iPhone
...nr4c. bill
> On Apr 9, 2018, at 11:56 AM, Dave Cole (NK7Z) <d...@nk7z.net> wrote:
>
> Press and hold
For what?
Sent from my iPhone
...nr4c. bill
> On Apr 9, 2018, at 1:07 PM, Roy Koeppe <k...@ncn.net> wrote:
>
> VOX needs be ‘ON.’
>
> Roy K6XK
> __
> Elecraft mailing list
> Home: http://mailman.qth
Don
Are there really two preamps or just a two step gain setting?
Sent from my iPhone
...nr4c. bill
> On Apr 6, 2018, at 6:32 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Ralph,
>
> Look at the K3S manual for the Preamp1 and preamp2 operation. It only
> app
No need for LINE cables if you have the updated USB KIO3 system.
Sent from my iPhone
...nr4c. bill
> On Apr 3, 2018, at 3:09 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Tony,
>
> You might want to use LINE IN for computer generated voice or something lik
And, I suspect your no speaker out problem isn’t with the KIO3 board at all.
It’s likely the audio speaker amp and it on a board in the front panel.
Sent from my iPhone
...nr4c. bill
> On Apr 2, 2018, at 2:25 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Marcel,
&g
Do you have SSB capability?
If yes, it’s just like any other radio.
Sent from my iPhone
...nr4c. bill
> On Apr 2, 2018, at 2:46 AM, Hans Bonnesen <hans.elf...@me.com> wrote:
>
> My K2/100 ( double enclosure ) is equipped w/ KUSB cable.
> How are the chanc
Drop in 8 “Copper Tops” and enjoy the radio today!
Sent from my iPhone
...nr4c. bill
> On Apr 1, 2018, at 1:16 PM, Dauer, Edward <eda...@law.du.edu> wrote:
>
> Several replies suggested I check the voltage of the NiMH batteries as a
> first step. Did so this morning, w
Don’t forget that rear Mic is not same as Lin In!
Sent from my iPhone
...nr4c. bill
> On Mar 31, 2018, at 8:14 AM, Richard Ferch <ve3...@gmail.com> wrote:
>
> I suspect that what you most likely need is for Line In to be used during
> digital mode operation (with th
LIN IN and LIN OUT are both on the rear panel. No use mic for this.
Sent from my iPhone
...nr4c. bill
> On Mar 30, 2018, at 2:09 PM, Ralph S. Turk <w7...@comcast.net> wrote:
>
> Does any one know the command for both Mike in Front Panel and Line in rear
> panel?
>
>
related
errors of my older K3.
Buy the new one.
Sent from my iPhone
...nr4c. bill
> On Mar 30, 2018, at 12:53 AM, Jeff <k...@att.net> wrote:
>
> I know Elecraft does not recommend bringing in a KPA3 from a K3 to a new K3S,
> but has anyone done this and how does the rig perform
Computer first. (This initializes the com ports)
Then radio. (Radio needs the com ports)
Now the software. (Now that radio has its necessary connections, start the
software which can now find the radio and other necessary connections. )
Sent from my iPhone
...nr4c. bill
> On Mar 28, 2
Looks nice but can you get to the controls?
Sent from my iPhone
...nr4c. bill
> On Mar 26, 2018, at 9:36 PM, Mike Markowski <mike.ab...@gmail.com> wrote:
>
> I found an economical way to go vertical with my Elecraft gear and save some
> desk space. It's slightly off-bea
What do you mean by “voice isn’t working”?
That sounds like a problem for your doctor.
If you mean no TX monitor you may need to turn u the monitor volume.
Did you select the proper mic input jack? What mic, does it need Bias?
Have you consulted the manual?
Sent from my iPhone
...nr4c
Mic bias???
Did you plug in the SPEAKER?
Sent from my iPhone
...nr4c. bill
> On Mar 25, 2018, at 2:18 PM, Robert <pd7rb...@gmail.com> wrote:
>
> Hi,
>
> Since a few days I have a problem with the audio of my K3.
>
> All normal settings are oke, but still no au
And trimming before soldering allows the exposed copper “end” of the lead to be
coated with solder thus eliminating corrosion to the bare copper.
Sent from my iPhone
...nr4c. bill
> On Mar 25, 2018, at 2:05 PM, hawley, charles j jr <c-haw...@illinois.edu>
> wrote:
>
> Th
from my iPhone
...nr4c. bill
> On Mar 25, 2018, at 9:32 AM, Chris <cgarba...@optonline.net> wrote:
>
> My KX2 started now only reports 25.4-1 when attempting to tune my antenna.
> The value does not fluctuate during the tuning process.
>
> During some transmit attempts
, tested and carefully packaged and
shipped to you so that you can enjoy using it for a very long time.
I hope you enjoy yours as much as I have enjoyed mine.
Sent from my iPhone
...nr4c. bill
> On Mar 22, 2018, at 10:26 AM, richard kappler <richkapp...@gmail.com&
Power with PWR knob on radio.
Sent from my iPhone
...nr4c. bill
> On Mar 21, 2018, at 11:40 PM, Ed Hoeck <edk...@gmail.com> wrote:
>
> Can someone tell me if there is an instruction on how to set the ALC on a
> K3 with the latest Elecraft sound card installed? The original ma
Latest firmware?
Check release notes. I think there has been changes in this in recent releases.
Sent from my iPhone
...nr4c. bill
> On Mar 17, 2018, at 7:19 PM, Don Minkoff <cowc...@ca.rr.com> wrote:
>
> I am having a new issue with my K3 on line out. I always had the r
No
Bias is independent as to front/rear connections.
I use my headset w/bias (CM500) on rear and my Heil HM12 dynamic mic on from
without bias in front jack.
Sent from my iPhone
...nr4c. bill
> On Mar 15, 2018, at 9:33 PM, Bob Harvey - K2PI <gadgetl...@gmail.com> wrote:
>
Try a humidifier to reduce the static.
Sent from my iPhone
...nr4c. bill
> On Mar 15, 2018, at 11:08 AM, Chuck Milam, N9KY <n...@arrl.net> wrote:
>
> Greetings, All!
>
> I'm getting static electricity shocks through my K-Pod case, and I need
> some suggestions for mit
All!
Sent from my iPhone
...nr4c. bill
> On Mar 15, 2018, at 1:15 PM, Wes Stewart <wes_n...@triconet.org> wrote:
>
> Your message or his?
>
>> On 3/15/2018 8:14 AM, w4grj wrote:
>> What
In config set to not installed. But I don’t think you have to remove it.
Sent from my iPhone
...nr4c. bill
> On Mar 14, 2018, at 10:40 AM, Tim Gennett <timk...@gmail.com> wrote:
>
> There's a possibility my K3 may be used in a multi op setting where many of
> the users wou
Why a switch. Unless you’re gonna have both rigs on at same time.
A simple “Y” adapter would seem easier.
Sent from my iPhone
...nr4c. bill
> On Mar 11, 2018, at 12:50 PM, Jim Rhodes <jimk...@gmail.com> wrote:
>
> A question. Do you really need a switch? Are
Why do you need USB?
It is a data mode so DATA A seems appropriate.
Should be a string in software config. Look for Radio Mode selection.
Sent from my iPhone
...nr4c. bill
> On Mar 9, 2018, at 10:43 AM, Jeffrey M. Swiger <n8...@arrl.net> wrote:
>
> Hey All,
>
Weak signal is not the same as low power !
Sent from my iPhone
...nr4c. bill
> On Mar 3, 2018, at 5:10 PM, Carl Jón Denbow <n...@qth.com> wrote:
>
> That's certainly not in the spirit of weak-signal digital modes. Most of us
> run anywhere from 1 watt to 35 watts.
There is a list with default values in the manual for both menus. Copy it and
mark you changes.
Sent from my iPhone
...nr4c. bill
> On Feb 25, 2018, at 12:17 AM, <ericrosenberg...@gmail.com>
> <ericrosenberg...@gmail.com> wrote:
>
> Is it possible to poll the K3 fo
Seems to be I used different settings for different bands. Usually just set it
as needed.
Sent from my iPhone
...nr4c. bill
> On Feb 24, 2018, at 10:31 AM, DX Radioman <dxradio...@gmail.com> wrote:
>
> Can you change the RF Gain control from per band to per mode?
> In o
Check the clocks on the computers. Sync them to a time server.
Sent from my iPhone
...nr4c. bill
> On Feb 22, 2018, at 6:30 PM, James Bennett <w6...@me.com> wrote:
>
> Hi Dennis - how you doing?
>
> Sorry I neglected to provide enough info - was in a hurry to post that b
Check out Fred Cady book on KX3.
Sent from my iPhone
...nr4c. bill
> On Feb 19, 2018, at 11:13 AM, Eddy Avila <k6...@hotmail.com> wrote:
>
> Greetings all, where can I find the wiring diagram for the KX3 ACC2? I've
> looked in my KX3 manual and didn't find much info.
I think old instructions said to connect Elecraft Utility direct to radio. Not
thru Microham.
Sent from my iPhone
...nr4c. bill
> On Feb 16, 2018, at 5:35 PM, "j...@kk9a.com" <j...@kk9a.com> wrote:
>
> What is your callsign? I do not have the USB interface however I
And you can affect duty cycle by adjusting the cw repetition rate. If it gets
too hot increase the delay.
Sent from my iPhone
...nr4c. bill
> On Feb 15, 2018, at 7:39 AM, "j...@kk9a.com" <j...@kk9a.com> wrote:
>
> RTTY contesting has a much higher duty cycle, especia
You can buy one from Elecraft.
A VGA “Y” may not work. Check diagrams.
Sent from my iPhone
...nr4c. bill
> On Feb 12, 2018, at 2:37 PM, Don Butler <n...@comcast.net> wrote:
>
> Tnx John …. I guess a better option might be to just buy a VGA Y-Adapter
> rather than make one
Check n1mm digital mode settings.
Sent from my iPhone
...nr4c. bill
> On Feb 11, 2018, at 8:33 PM, Tony Osman <tonyosman2...@gmail.com> wrote:
>
> Not sure if this is an elecraft issue or a N1MM+ issue, so I will pose the
> question in both groups. I noticed this weekend
Just don’t do it.
Sent from my iPhone
...nr4c. bill
> On Feb 4, 2018, at 2:18 PM, Dave Cole (NK7Z) <d...@nk7z.net> wrote:
>
> I have asked on and off about ALC over the past few months, and I think I
> want to use ALC as a safeguard to amp overdriving as an e
“Selectivity”???
Do you mean DSP filter width?
Narrow width does decrease the background noise.
Sent from my iPhone
...nr4c. bill
> On Jan 30, 2018, at 4:05 PM, Roger D Johnson <n...@roadrunner.com> wrote:
>
> I noticed that during the contest, that if I selected 50 or 100 Hz
Come on. This is a great little radio. But it’s designed to be s great “little”
portable radio. How many will carry a 10 MHz ref oscillator to a mountain top.
If you’re looking for a full fledged base station with all the options, get a
K3S.
Sent from my iPhone
...nr4c. bill
> On Jan
I think you have to set the power to required setting in Operate mode the first
time. The radio will reset to full or low when amp Mode is selected after that.
Sent from my iPhone
...nr4c. bill
> On Jan 16, 2018, at 10:11 PM, Buck <radiok...@gmail.com> wrote:
>
> Someone ple
Call HRI in Woodbridge. My source!
Sent from my iPhone
...nr4c. bill
> On Jan 16, 2018, at 10:08 AM, "j...@kk9a.com" <j...@kk9a.com> wrote:
>
> I saw the Heil connectors and Heil wire when I first started my search. I
> was not interest in the wire. I did ha
Heil has the best Foster connector. Sold in pairs. Not sure if price but very
reasonable.
Sent from my iPhone
...nr4c. bill
> On Jan 16, 2018, at 8:10 AM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote:
>
> For a reason Clay stated and that is not using the shield as a curr
Look in manual about installing. Your Configuration may be confused or you may
have accidentally in-installed it in Configuration.
Sent from my iPhone
...nr4c. bill
> On Jan 13, 2018, at 11:43 AM, Jamie WW3S <w...@zoominternet.net> wrote:
>
> All of a sudden, my K3, that SHO
I paid $200 for mine new a few guests ago. Passed it to another CW op when I
purchased a real N2DAN Mercury paddle.
I liked the Hex a lot. Very stable and solid feel.
Sent from my iPhone
...nr4c. bill
> On Jan 8, 2018, at 2:55 PM, "j...@kk9a.com" <j...@kk9a.com> wrote:
So I’m correct. The EQ is disabled in digital modes.
Sent from my iPhone
...nr4c. bill
> On Dec 29, 2017, at 4:02 PM, Chris Hallinan <challi...@gmail.com> wrote:
>
> Hi, Lyle.
>
> Thanks for helping me understand the K3 even better ;)
>
> I'm working on build
That book is too tiny for me to read anymore. Glad I don’t need one anymore!
Sent from my iPhone
...nr4c. bill
> On Dec 29, 2017, at 4:16 PM, Ron D'Eau Claire <r...@cobi.biz> wrote:
>
> Back when I and my buddies were learning CW we had to pass 5, then 13 wpm
> sending tests
Prob the first 3. The 4th is mostly for digital and thus not needed.
Sent from my iPhone
...nr4c. bill
> On Dec 29, 2017, at 11:53 AM, Chris Hallinan <challi...@gmail.com> wrote:
>
> I understand that the K3 has two separate equalizer settings for CW and
> SSB.
What’s plugged into the Tec Ant Port?
Sent from my iPhone
...nr4c. bill
> On Dec 24, 2017, at 8:48 AM, Randy Lake <randyn1...@gmail.com> wrote:
>
> Good morning all. Merry Christmas.
> After installing a new KXV3B board on my K3 I now, on power up, get a HI
> RFI msg. An
Check Config:S-Meter Mode on both K3s.
Sent from my iPhone
...nr4c. bill
> On Dec 13, 2017, at 6:11 PM, K9MA <k...@sdellington.us> wrote:
>
> Are both units running exactly the same configuration, at least as far as S
> meter and AGC parameters?
>
> 73,
> Scott
When I first turned my new KX3 a few years ago it immediately did as you
describe. VOX was ON and the VOX Gain at MAX. Didn’t matter that no mic was
plugged in.
Sent from my iPhone
...nr4c. bill
> On Dec 10, 2017, at 12:58 PM, k...@arkayengravers.com wrote:
>
> Hi Bill
> The
VOX. VOX.
Sent from my iPhone
...nr4c. bill
> On Dec 10, 2017, at 12:27 PM, Nr4c <n...@widomaker.com> wrote:
>
> Check BOX setting. Turn it OFF.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Dec 9, 2017, at 5:30 PM, Don Wilhelm <do
Check BOX setting. Turn it OFF.
Sent from my iPhone
...nr4c. bill
> On Dec 9, 2017, at 5:30 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Ken,
>
> That message says the key or PTT jack is active, and the KX3 'thinks' the dot
> contact is closed.
>
> Do
Mine is quite stable after the 15 min warmup.
Sent from my iPhone
...nr4c. bill
> On Dec 9, 2017, at 5:44 AM, Vic Rosenthal <k2vco@gmail.com> wrote:
>
> My K3 seems quite stable (at least for CW purposes) although I don’t have a
> TCXO. But there is considera
That’s what I want too.
But, alas, it’s not possible until Elecraft makes it so. I’d settle for a menu
choice.
Sent from my iPhone
...nr4c. bill
> On Dec 8, 2017, at 12:20 PM, zachary petersen <petersen@gmail.com> wrote:
>
> Bill,
> Thanks for responding. What I a
You’re not the first person to request that we have a choice of Decode OR
Frequency in VFO B window.
Sent from my iPhone
...nr4c. bill
> On Dec 8, 2017, at 11:51 AM, zachary petersen <petersen@gmail.com> wrote:
>
> Fred,
> I have a KX3 I thought this mailing list was
I think QRZ gets an FCC feed every day after it gets to the ULS. It’s not
“Official” but up to date for FCC issued calls.
Sent from my iPhone
...nr4c. bill
> On Dec 6, 2017, at 10:19 AM, James Wilson <w4rk...@gmail.com> wrote:
>
> A more reliable check is the offici
There is one built in to every K3, K3S, KX3 and prob KX2.
Sent from my iPhone
...nr4c. bill
> On Dec 4, 2017, at 11:35 AM, Michael Walker <va...@portcredit.net> wrote:
>
> Hi All
>
> Before I order a new one, does anyone have one they wish to part
Check the manual and verify mic settings in Menu. For an electret Mic you
should see “rpl bias”. For dynamic prob “rph “.
Sent from my iPhone
...nr4c. bill
> On Nov 27, 2017, at 5:27 AM, Ron Fial <r...@fial.com> wrote:
>
>
> My K3 rear panel Mike input signal input
iPhone
...nr4c. bill
> On Nov 24, 2017, at 9:51 PM, rich hurd WC3T <r...@wc3t.us> wrote:
>
> Page 251 in the Fred Cady book does say it in the menu description for the
> TIME function. "A battery must be in the KXBC3 to maintain the time if the
> external power supply
No battery, no clocky. It has to have power.
Sent from my iPhone
...nr4c. bill
> On Nov 23, 2017, at 11:38 AM, Eugene Worth <erw@gmail.com> wrote:
>
> OK, folks, I’ll admit to this being a “dummy load” error. However, I have
> searched the archives and can’t find a s
I believe a Kenwood style adapter will work with the K2.
Sent from my iPhone
...nr4c. bill
> On Nov 20, 2017, at 11:47 AM, Dauer, Edward <eda...@law.du.edu> wrote:
>
> I have a Heil Proset that I bought for use with my KX3. Now that I have a K2
> with the SSB option I
Are his filters centered?
A filter offset might cause him to tune off freq.
Sent from my iPhone
...nr4c. bill
> On Nov 18, 2017, at 7:23 PM, Mike Harris <mike.har...@horizon.co.fk> wrote:
>
> Hi,
>
> We have a visitor at another QTH. He is using a KX3. At presen
again till I reach the top of band. I
rarely need a retune while operating.
Sent from my iPhone
...nr4c. bill
> On Nov 18, 2017, at 2:41 PM, Kevin der Kinderen <kkinde...@gmail.com> wrote:
>
> Hi:
>
> I'm the one that recently reported problems with the KPA500. I've rep
Yes. Very nice copy of the Mercury by N2DAN but with Bencher style adjustments.
Use one until I purchased an original N2DAN MERCURY from an estate of an old
friend.
Sent from my iPhone
...nr4c. bill
> On Nov 18, 2017, at 12:20 PM, <marvwhee...@nwlink.com>
> <marvwhee...@nw
You figured it out. Write the book your self
Sent from my iPhone
...nr4c. bill
> On Nov 17, 2017, at 6:36 PM, Bill Rogers W3UL <w3ul.b...@gmail.com> wrote:
>
> I just spent the better part of the day trying to get my .wav files to play
> on my new K3S. (This is part
What mode and frequency on VFO B AND VFO A when this occurs?
Sent from my iPhone
...nr4c. bill
> On Nov 16, 2017, at 3:50 AM, Michael Eberle <mtebe...@mchsi.com> wrote:
>
> Was this issue ever resolved? I have noticed the same thing with mine
> although the iss
I think any external electronic keyer will plug into the Key jack.
Sent from my iPhone
...nr4c. bill
> On Nov 10, 2017, at 7:16 PM, MaverickNH <cbjesse...@comcast.net> wrote:
>
> Perhaps it’s just a question of using an external keyer with a K3S, but how
> do I best c
Yes. Buy nice, not twice.
I was fortunate to locate an N2DAN MERCURY for a reasonable price. It is
smith! It belonged to a very old friend of mine and he was moving into a
"senior living" space.
Sent from my iPhone
...nr4c. bill
> On Nov 9, 2017, at 9:31 AM, C
Are you sure that they are not being hit, but are so well bonded that the
strike goes directly to ground?
Sent from my iPhone
...nr4c. bill
> On Nov 7, 2017, at 11:58 AM, <j...@kk9a.com> <j...@kk9a.com> wrote:
>
> Why would lightning avoid striking a grounded
Don't set to auto tune. Use semi or manual whatever your ATU calls it so the it
doesn't retune on its own.
Sent from my iPhone
...nr4c. bill
> On Nov 6, 2017, at 8:52 PM, Ken K6MR <k...@outlook.com> wrote:
>
> Must be some magic going on in the AH-4. It specifies “Tuning po
I've trained my KPA500 to remember the solutions at 20 KC increments across
each band, starting at 10 KC from bottom. Works well.
Sent from my iPhone
...nr4c. bill
> On Nov 6, 2017, at 7:52 PM, E T <etks...@gmail.com> wrote:
>
> I can get and hook up a power meter
Use n1mm+
Sent from my iPhone
...nr4c. bill
> On Nov 6, 2017, at 2:51 PM, Tom <tom...@videotron.ca> wrote:
>
> Hi,
> Yes you need a keying interface.
> This link gives a few options. IMHO, having a WinKey is best
> http://www.n3fjp.com/cwschematic.html
> 73
N3FJP will not use a com port for more than one function. Either keying or CAT
control.
Sent from my iPhone
...nr4c. bill
> On Nov 6, 2017, at 2:46 PM, <marvwhee...@nwlink.com> <marvwhee...@nwlink.com>
> wrote:
>
> I tried to set up the N3FJP logging program
The ATU is built-in.
Sent from my iPhone
...nr4c. bill
> On Nov 2, 2017, at 2:14 PM, RIchard Williams via Elecraft
> <elecraft@mailman.qth.net> wrote:
>
> James,
> Am not sure why you need a tuner between the radio and the amp in the first
> place?? As of now, I h
I will add that my receptacle is 5 ft from the panel. And the only other things
on this circuit are the light in the Keurig, microwave clock and LCD on the HP
laser.
Sent from my iPhone
...nr4c. bill
> On Oct 30, 2017, at 12:01 PM, Nr4c <n...@widomaker.com> wrote:
>
> Mine
Mine works very well on 110 volts. I use a 15A circuit and it powers the
Elecraft 30 Watt PS and the amp.
Sent from my iPhone
...nr4c. bill
> On Oct 29, 2017, at 10:23 PM, Robert G Strickland <rc...@verizon.net> wrote:
>
> What's the conventional wisdom on running the KPA500
See my website at NR4C.net and look for Projects tab.
Sent from my iPhone
...nr4c. bill
> On Oct 28, 2017, at 7:18 PM, Bill Johnson <k9...@live.com> wrote:
>
> I don't have photos but my launcher is similar but the sprinkler valve is on
> the end and the "shoot
Read your last paragraph and double check your work.
Sent from my iPhone
...nr4c. bill
> On Oct 28, 2017, at 3:55 AM, Drew AF2Z <pu...@af2z.net> wrote:
>
> My K3 turns on whenever power is connected, without pushing the power button.
> When I push the power button to shu
Yes. But I believe that is Junction temperature, not case on heatsink temp.
Remember the case bottom is heatsink for those. Make sure screws are tight.
Sent from my iPhone
...nr4c. bill
> On Oct 27, 2017, at 12:19 PM, N2TK, Tony <tony@verizon.net> wrote:
>
>
I doubt it at time.
Sent from my iPhone
...nr4c. bill
> On Oct 22, 2017, at 10:22 PM, WB0OEW <ecdow...@clearskyinstitute.com> wrote:
>
> Any movement on this idea for linein-out during data modes on kx3?
>
>
>
> --
> Sent from: http:/
Only one program can control a serial port.
I log to wsjt and then after the session import the ".adi" file into my logger.
Use Cortana or other search to locate the ado file.
Sent from my iPhone
...nr4c. bill
> On Oct 22, 2017, at 4:33 PM, Bill Frantz <fra...@pwpconsult.co
Totally untrue!
Where did you get this information. I have many FT-8 contacts in DATA mode.
AFSK A and FSK D modes are LSB modes for RTTY.
DATA A and PSK D are USB modes for PSK and DATA A works with other USB modes
like JT65 and FT8.
.
Sent from my iPhone
...nr4c. bill
> On Oct
You power off with the Pwr button K3/0 and it shuts down the remote radio. It
turns On the remote with a short connection to a pin on the Accy 2 connector.
Sent from my iPhone
...nr4c. bill
> On Oct 14, 2017, at 7:24 AM, Richard C Bean <dick.b...@verizon.net> wrote:
>
>
>
Yes! It's a "computer".
Sent from my iPhone
...nr4c. bill
> On Oct 13, 2017, at 4:00 PM, Dave Cole (NK7Z) <d...@nk7z.net> wrote:
>
> Respectfully, is that really true? The K3 needs to be shutdown via the Power
> switch due to some sort of shutdown procedure
You should be in AFSK A mode. RTTY is a leer sideband mode.
Sent from my iPhone
...nr4c. bill
> On Oct 10, 2017, at 4:37 PM, Roger D Johnson <n...@roadrunner.com> wrote:
>
> I'm trying to get my system set up for RTTY. I think I have the cabling
> OK. Using MTTY I can d
The Shire SM58 mic is a Dynamic mic and does not require bias (required only
for electret mics).
Sent from my iPhone
...nr4c. bill
> On Oct 6, 2017, at 7:27 PM, Richard Day <rich...@richdayhealthplans.com>
> wrote:
>
> Why did you turn the mic bias off? Have you tried tu
GOOGLE D-Sub connector
You'll find a bit of information that will surprise you! Check out the
wikipedia link.
Sent from my iPhone
...nr4c. bill
> On Oct 6, 2017, at 12:30 PM, mjpilgrim <mpilg...@bellsouth.net> wrote:
>
> I just acquired a P3, but was surprised to learn that
You can also tie an underwriters knot at the split point.
Actually 67 feet twice makes a 135 foot dipole for 80 meters, not 40.
Sent from my iPhone
...nr4c. bill
> On Oct 4, 2017, at 10:35 AM, rich hurd WC3T <r...@wc3t.us> wrote:
>
> Would not a bnc-to-banana plug
What sub-mode on 30 meters?
Sent from my iPhone
...nr4c. bill
> On Oct 3, 2017, at 3:35 PM, Bob <wb4...@gmail.com> wrote:
>
> Hi,
>
> I have a K3s with FW 5.60.
>
> On all bands except 30 meters, when I place the rig into the DATA mode, I
> see the gr
Try RpH or even the super high setting. See manual for more details.
Sent from my iPhone
...nr4c. bill
> On Oct 3, 2017, at 2:50 PM, Stewart <s...@ke4yh.com> wrote:
>
> Is anyone using a Shure SM58 mic with their K3s? If so are you using a
> preamp? My O'scope shows that
How much SSB do you do on 30 meters?
I'd start by re-checking the Data/submode on the two bands.
Sent from my iPhone
...nr4c. bill
> On Oct 2, 2017, at 6:03 PM, Mike Baird <w0rs...@gmail.com> wrote:
>
> Perhaps this is a software problem, but I thought I'd start here. Using
Split on 60 meters takes two channels and is a waste of BW.
Remember there is no "up 1k" on 60 meters. TX is only authorized on the
channels.
Sent from my iPhone
...nr4c. bill
> On Sep 29, 2017, at 7:50 PM, Fred Jensen <k6...@foothill.net> wrote:
>
> I used the K3
Be sure to set radioRS232 to USB not a baud rate like the ref K3.
Sent from my iPhone
...nr4c. bill
> On Sep 29, 2017, at 7:27 PM, Rick Tavan <r...@tavan.com> wrote:
>
> Helping a guy install a KIO3B in his K3 S/N 4xxx, I'm unable to see it
> listed as a COM
501 - 600 of 1160 matches
Mail list logo
