t I only have a few weeks to wait.
Frustrating.
Ralph, VE7XF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: h
>I am at this point, after almost 3 years, uncertain of just where I
stand. I know I'm on the list for a KIO3B UPDKT...
Me too! I paid for three KIO3BUPKITs on 20 April, 2021 (to improve my
preamp situation), and have not heard a peep since.
Meanwhile, I've lost interest in 6m, so they will be
ve us the last point needed to squeak
past the competition.
Ralph, VE7XF
RIP VE7FO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailma
The real question is/was what value of zener.
> On 08/17/2022 9:45 AM Andy Durbin wrote:
>
>
> "The latest revision of the schematic for the KPA500 TR Switch shows a Zener
> diode at the gate of Q4 in place of R3, the 100K resistor previously."
>
> What is the latest revision? I have Rev D
In the attached email Frank W2yk wrote the 1A2R from 404A. I only find a 403.
Please advise
Ralph, w7HSG/AFA9RT
> On 04/01/2022 9:48 AM Rick Bates, NK7I wrote:
>
>
> It does. But you HAVE to remember to send a dit on each band change so
> the amp knows where you are.
>
>Heritage Galleries & Auctioneers... sold Johnny Carson’s Shure SM33
Ribbon Microphone at auction in 2005 for $50,787.50.
Holy Mackinaw!
I've got one of those (not Johnnie's :-(
Wish me luck.
VE7XF
__
Elecraft mailing list
Home:
Over the years, I've tried many microphones, and have settled on the
Heil HC-5 capsule,
usually stuck to my favourite Sony MDR-V6 headphones.
A good balance between fidelity and cut-through-it-ness, imho.
Usually used with little or no equalization (sorry, Jim).
VE7XF
(45 years of sound
he problem. The main
problem was a loose ground clamp up on the pole. The power company also used
an acoustic parabolic mike which pin-pointed the exact connector. New
connector problem solved
Ralph, W7HSG/AFA9RT
> On 08/20/2020 7:07 PM ab2tc wrote:
>
>
> Hello all,
>
>
>...several REAL Amphenol UHF connectors I ordered, which arrived in
sealed plastic bags, had no threads on the inside of the coupling rings.
The remainder of the connectors in the shipment were just fine.
I have a couple of those too. I thought they were a special push-on
version for
power line
grounds etc. My antennas are not the problem. I tried a sharp cutoff filter
for everything below
3.5mhz. No positive measurable results.
Ralph, W7HSG, AFA9RT
520-444-6610
__
Elecraft mailing list
Home: http
>In the meantime I guess we will have to wait and stare at pictures of
the K4 Front panel.
While anxiously waiting in line for the KPA500 to be released, I printed out a
picture of the front panel
of the '500, cut it out and placed it on the shelf where the '500 would go.
Then I could pretend
This radio has been sold!
Thanks for all who enquired.
VE7OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I'd like to sell my trusty KX1, sn01151 in order to upgrade to a 2 or 3.
This unit has four bands, 80, 40,30, and 20. Autotuner, and paddles. Works
great and used on SOTA activations.
I don't know how much these older units are going for, so make me an offer.
Reply offline to my email
the PowerMite QRP
rig, Keyers and some other things. I found a KR-40 keyer under the Christmas
tree a bit later.
Ralph N4TG
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Clay Autery
Sent: Tuesday, January 14, 2020 3:13
I can not use the digital modes because I need to switch to Upper SB after the
last
electron has been sent in the digital mode and the reverse. Call is instant
break in
between USB voice and digital M110 A
This could be a deal breaker on a K4 purchase.
Ralph, W7HSG/AFA9rt
> On September
e is a way on the K3, service was not able to point it out.
Ralph, W7HSG/AFA9RT
> On September 19, 2019 at 8:51 PM Wayne Burdick wrote:
>
>
> Just in case there's any doubt, the K4 has a complete,
> multiplatform-compatible sound card interface via its USB-B connector, with
&g
Mike
When you get a reply, please share. I use a KPA500 with a KAT500 on Mars freq
from 2-3.5 Mhz, 4-7.5 mhz
and 8.5 to 14Mhz. I have never noticed any problems but I have never checked
anything other
does it work and stay within its operational numbers.
Ralph, W7HSG/AFA9RT
> On August
Testing to see if My email shows up.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Thanks Joe
I am more concerned if the SDR front end will be overloaded.
The spurs are a work in progress. If it rained once a week,
I would not have any spurs.
Ralph
> On July 23, 2019 at 12:31 PM "Joe Subich, W4TV" wrote:
>
>
>
> On 2019-07-23 12:54 PM, RALPH TURK
This is a test of Plain text
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
This is a test of HTML
Ralph, W7HSG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
tion is how well will the K4 perform in this environment The only
> problem with the K 3 is caused
>
>
> by rusty fences etc radiating a mix between stations. Day time 75 -80 not
> usable some of the time.
>
>
> This is not a overload pr
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Raj
Check the RJ45 jack very carefully. One of the wires might have bent slightly
and shorts out the adjacent wire. I have found that a few times when repairing
computer problems for friend & family
Ralph, W7HSG/AFA9RT
> On July 19, 2019 at 12:32 PM Rajiv Dewan wrote:
>
>
Will the k4 with Mars software transmit from 1.8 through 30 Mhz with no band
stop
like the K3 has at the IF freq?
Ralph, W7HSG/AFA9RT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Could it be this? I saved this item from a KE7X post. Worked for a
friend with a similar mystery problem -
VE7XF
...
At one point Elecraft had to change the switch that cuts out speaker
audio when the phones are plugged in so there is a setting in
I guess an audio response to your verbal instruction is possible...
Except when the guy on the other end of your rag-chew says "QRT", and your
radio turns itself off.
VE7XF
__
Elecraft mailing list
Home:
Wes
It has been snowing since about 7am just across the Mtns in Cortaro.
Ralph, W7HSG
> On February 22, 2019 at 7:18 AM Wes wrote:
>
>
> This week it's rodeo days in Tucson. A favorite of the snowbirds. This
> morning
> however, it seems the snowbirds brought the sn
>Ever since I have owned my K3, I have noticed that most spots put the
K3's receiver above the actual frequency of the spotted station.
If you're talking about the spots in the bandmap, the difference is
probably your BFO pitch offset.
Switch sidebands, and you'll see the mark on the other
SHOW HOW/EXPLAIN ETC. I AM VERY INTERESTED.
RALPH,AFA9RTI AM NOT SHOUTING KEY BOARD STUCK
> On February 12, 2019 at 7:06 PM Ken K6MR wrote:
>
>
> “Actually, I suppose one could drive 2 KPA500's
> from one K3 and sum the output for a virtual KPA1000.”
>
>
>
>
Harbor Freight Hand held IR laser thermometer is your best friend.
Hold trigger, aim visible light, read surface temperature.
Ralph ,W7HSG
> On February 6, 2019 at 8:59 PM Mike K8CN wrote:
>
>
> Thanks, Keith, for the pointer on audio IC U1 on the DSP board. Visual
> i
What time & Freq is the Elecraft SSB net on?
Ralph,W7HSG
520-444-6610
Ralph S. Turk,
> On February 2, 2019 at 10:51 PM kevinr wrote:
>
>
> Good Evening,
>
> Tomorrow we are due for a snow storm. Somewhere between six and
> eight inches b
Just a dumb question. Have you checked the DC to the K2 either battery or
power suply.
Ralph S. Turk, W7HSG
520-444-6610
> On February 2, 2019 at 1:28 PM mustang65 wrote:
>
>
> Thanks for answers.
> The symetrix output impedance is 200 ohm and it is recommended to not lo
A500 & the
KAT500.
Ralph, W7hsg/AFA9RT
> On November 6, 2018 at 8:09 AM Don Wilhelm wrote:
>
>
> Bob,
>
> That is a simple solution, but how do you handle the RF output of both
> transceiver to the single RF in on the amplifier?
>
> The only caution I ca
Hi all
I need to be able to key the KPA500 & KAT500 from both a Yaesu 1000mp and my
K3.
I assume (I know don't assume) I can use diodes to isolate both radios.
Any thoughts?
Ralph, W7HSG/AFA9RT
__
Elecraft mailing list
Home:
I need a new version of the K3 manual. I went to the new website,
selected 'support' from the menu, then 'manuals', which took me to the
'document and manuals download' page. I am unable to go farther.
Clicking on any of the six choices available gets me nowhere.
VE7XF
sorry, forgot. my USB III and cable have been sold.
w1ZK
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft mailing list
Home:
Tnx, Ken K5KFW
Ralph W1ZK
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
My Bad. Forgot, I had a 2nd item to list. A brand new microHAM USB III
interface with my HB K2/100 cable.
Please see my website for
details;http://www.christmascrostics.com/Equipment_Sale/For_Sale_2.html
Ralph W1ZK
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners
Please see my web page for the info on my KX3:
http://www.christmascrostics.com/Equipment_Sale/Elecraft_KX3.html
Ralph W1ZK
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
Can one use the 12vdc of the K3 to power the KAT 500? The K3 has the latest
update for the 12 dc.
Ralph, W7HSG/AFA9RT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
What Day, time (gmt)
> On August 11, 2018 at 5:45 PM Phil Shepard wrote:
>
>
>
> Elecraft SSB Net 7-15-2018
>
> WB9JNZ Eric IL K3 4017 Net Control
>
> AE6JV Bill CA K3 6299
>
> W7QHD Kurt AZ KX3 8697
>
> KG7LOA Ted WA DRAKE R4C E4XB 1ST TIME CHECK IN
>
> NS7P Phil OR K3 1826
>
> WM6P
I have found a KPA 500. Still looking for a used KAT 500
Ralph, W7HSG/AFA9RT
> On August 6, 2018 at 2:12 PM "Ralph S. Turk" wrote:
> Hi all
> Looking for a used KAT 500 & KPA 500
>
> Ralph, W7HSG
> _
Hi all
Looking for a used KAT 500 & KPA 500
Ralph, W7HSG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list ho
>Mouse click QSY and internet spots would be a huge benefit. Has anyone
done this?
My daily logging and contest programs do this for me. I don't need it
cluttering up my P3.
VE7XF
__
Elecraft mailing list
Home:
Anybody who doubts that the KX2 is a serious radio oughta see this IARU
3830 entry by DL/OL0A -
http://lists.contesting.com/pipermail/3830/2018-July/506808.html
VE7XF
__
Elecraft mailing list
Home:
Wayne.
I would like to see a K3 upgraded version compared to the K3S and 7610. I have
the K3 sn4629 with new Syn 2nd rx using it on MARS alot.
Ralph, W7HSG/AFA9RT
> On July 7, 2018 at 10:05 AM Wayne Burdick wrote:
>
>
> Our detailed, two-page comparison table between the K3S
>those "backstab" receptacles that electricians love to use because
they are quick and easy do not have adequate contact stength and can
overheat and cause voltage drops and a fire hazard.
Here's a weird one:
Two years ago, I bought a house that had been built in 1980, by the
folks that I
>>Why in the 20 century we need to use foot switch?
I strongly agree. I HATE foot switches, because I'm very poorly
coordinated...
I love foot switches (Linemaster, of course!). Started using one with my
Viking II for a faster CW changeover (instead of 3 switches) in 1958.
Tried VOX when I
I'm on the list for a '1500, expected sometime in August (maybe).
However, I'm getting concerned about the reported high fan noise level.
I currently have a '500, and following a suggestion a year or two ago,
I've turned the fans around 'backwards' and they seem to be quieter in
this
I would appreciate it if the transceiver had bolted connections or at least
double up the power poles
What I have done in the past, (with cheaper radios) is to bypass the power
connector, and solder heavy
wires directly to the DC input pads inside the radio. The power supply end has
ring
ersions.)
>
> On Fri, 6 Apr 2018, Ian Kahn, KM4IK wrote:
>
> > Ralph,
> >
> > If I may suggest, download and read the manual from the Elecraft web site,
> > if
> > you haven't already. Also, get a copy of Fred Cady's, K7EX, excellent book
> >
.
I also should state that I am very new to the K3. Have only had for two weeks.
Was from a estate
sale.
Thanks
Ralph, W7HSG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
>I wonder if a better way to track how the KPA1500s are shipping...
> when someone on this list reports receiving one,can you tell us the
day you ordered it?...
Gee whiz, guys, relax. Enjoy the anticipation. Xmas will come on Dec.
25th, not a day before.
i haven't even ordered mine yet, and
Does any one know the command for both Mike in Front Panel and Line in rear
panel?
I need both at the same time, Mike for voice and Line in for digital.
Ralph, W7HSG/AFA9RT
__
Elecraft mailing list
Home: http://mailman.qth.net
>Yeah, but knowing Elecraft, it could take up to 11 years to ship!
Me-ow!!! Would you like a saucer of milk with that?
VE7XF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Where does one find the News Letters?
Ralph, W7HSG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
>I sometimes find myself switching diversity on and off while trying to
break a pileup when the dx station is particularly weak.
>The P3 + VGA is helpful in spotting when diversity is on and I can’t
hear the pileup.
When my diversity is in use, I can get by fairly well in deciphering the
>But now I need three receivers. Two for diversity and one to scan the
pileup.
K4
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
>http://www.elecraft.com/manual/E740182%20KPA3CONMDKT%20Instruction%20Manual.pdf
My K3, of a similar vintage, had the same problem. The URL above
describes the problem, and a permanent fix.
I didn't trust myself to change the pins on the mother board, so I used
a temporary "bypass operation" -
>...About a quarter of the time when I clicked on a callout in the
N1MM+ Bandmap the K3 would go into SPLIT mode. Anyone else see something
like this?
Drove me crazy too, until I realized what it was -
the spotting station had put in different xmit and rx frequencies
(probably
>the Bouvet Island DXpedition is now officially aborted...
Well, they sure gave it the old college try! I'm glad that I wasn't on
that boat!
Without the OQRS money from the QSL cards, they'll be in debt.
Let's all got to their website (www.bouvetdx.org) and send them some
money.
If we all
In my small lot, I can’t even put up a short wire! If I had the space to put up
a long wire, I would put up a tower instead.
Ralph AA5YC
> On Jan 11, 2018, at 12:22 AM, Ron D'Eau Claire <r...@cobi.biz> wrote:
>
> A longer wire produces sharper lobes and, taken to an extre
I've been using foot switches since 1957, with my Viking II and 75A-4.
The first one was somewhat crude.
IMHO, the Linemaster series of industrial-strength footswitches is the
best. Very rugged, but responds to a light touch.
Mine gets used a LOT, and I expect it to outlast me!
You haven't said anything nasty lately about the president of the US,
have you?
VE7XF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
... the new one has the LED 4 on and on the original the LED is off.
How can I turn this light on or off?
I'd use the "Car Talk" method - put a piece of black tape over the LED you
don't want to see.
VE7XF
__
Elecraft mailing list
I actually thought all radios had this feature. When I first got my KX2, i kept
turning the knob faster and faster looking to see if it would kick in, and was
kind of disappointed when it didn’t. So I would like to see it added to the KX2
and KX3.
Ralph AA5YC
> On Jan 2, 2018, at 1:51
I had this problem with #1823 just after I returned from an expedition
in 2010. (lucky, eh?)
It is indeed a result of the steel pins carrying the 12v to the PA
becoming tarnished.
Not trusting myself to replace the pins, I opted for the "bypass
operation" - wire jumpers around the pins
Only $10k and possibly a visit from the FCC!
I had a factory built Heathkit Chippewa KL-1 amplifier back in 1965. A
pair of grid driven 4-400 tetrodes in Class AB1. 10 watt drive for 1KW
plus, plus out. 3-400Z triodes didn't enter the picture until 5 or 6
years later. The amp weighed 90lbs
1Khz accuracy.
W1ZK
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Forwarded Message
Subject:[Elecraft] Noise Blankers
Date: Sun, 3 Sep 2017 13:59:59 -0400
From: Ralph McClintock <w...@comcast.net>
To: k...@sdellington.us
Scott,
There are two NBs available in the K3. Have you tried the K3 DSP NB?
Don't even t
My Mini-Mods have been sold.
W1zk
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft mailing list
Home:
For Sale: Elecraft Mini-Module kits.N-GEN wide band noise generator
100Khz-500Mhz. XG1 1uV/50uV 7Mhz test oscillator. XG2 3 band
1uV/50uV 20M/40M/80M test oscillator. Includes an approximately 3 ft
RG-58 cable with RCA connectors plus UHF and BNC adapters. Perfect
working order, full
In addition to DX Atlas and Logger32, I use the paper ARRL grid square
map, overlaid with directional lines every 30 degrees true, for quick
antenna pointing. You'll need that when you get your 7el Yagi up.
Yellow highlight for worked, green highlight for confirmed.
After a while, your skip
Still looking for a 1Khz filter. As others have said, the
filter keeps adjacent signals out of the K3 AGC and is
well worth the investment.
I have a K3 and a K3Sthe K3s has my 1 Khz filter and
the K3 does not. On Field Day when I used the K3 I really
missed the 1 Khz filter.
I usually
Anybody got a 1 Khz filter for K3 they wanna sell??
de K8RYU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Keying from computer, PTT selected, my call sent as N3VIP. missed first dash.
Keying from computer, VOX selected, my call sent as G3VIP. sent OK.
Now that I think of it, years ago, using my Brand Y xcvr with a contest logging
program,
I had exactly the same problem with the same solution. I'm
I have built several
small kits and the Elecraft K1
Thank you
Ralph
KD2EJR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Sorry to hear that. I spent a week on Midway after coming off a ship
in 1967 waiting for a hop back to NAS Barbers Point. One night I went to
the Club and met 4 guys with long beards. Coasties from the Loran
station on Kure. They came to Midway for R
W1ZK
--
Webmaster USS PUEBLO Veterans
).
(I understand the difficulty of getting high power from the p/s to
the PA.)
I don't expect to carry it around, so weight is not a problem for me.
Expeditions can use the KPA500 :-)
When this amp is available, I'll sell amplifiers Ac and Am and buy one.
I'm keeping my KPA-500!
Ralph, VE7XF
Sold to Ron K5MM
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I bought this when I had to make updates to my K2/100. The K2 is gone
now so it is available. $165 shipped. It is on my website:
http://www.christmascrostics.com/Equipment_Sale/For_Sale_2.html W1ZK
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life
W1ZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
For Sale:Elecraft KRC2 Band Decoder with the ACC2 option. Included are 2
cable sets, one for the K2/100 + KAT100 antenna tuner the 2nd one for
ICOM radios which have an ACC-2 connector. It is presently set for a
K2/100+KAT100 to control a Ten Tec Hercules II amplifier. It is in
perfect
The Elecraft website is down this Monday morning? Overwhelming number of
sales?
Ralph W1ZK
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft
Hi folks,
Closing down my summer station. K2/100, TT Herc II, KRC-2ACC etc. are
for sale.
The link on my website: http://www.christmascrostics.com/Ham_Radio.html
Click on the Amateur Radio Equipment for Sale link. Still got my K3
setup going strong in the main station.
Ralph W1ZK
>I have a stereo cable connected from K3 LINE OUT to a hand recording
LINE IN is recording the other
>station audio but is not recording my audio
Jorge:
Maybe try turning 'MONITOR' on.
VE7XF
__
Elecraft mailing list
Home:
>Pay very close attention to the screw lengths and sort them out
carefully...
>later you may need the 3/16" and the 1/4" is tooo long :)
Amen to that, brother!
After 50+ years of building radios, I built my K3 very carefully.
However, on completion, the output was very intermittent. Tapping on
Mike,
I sense a very "sinister" tone coming from your post!Love it. I
have many lefty friends. I have to admit though, I have watched a couple
sending at high speed while my head told my stomach to "relax, calm
down, you are just having a bad food dream."
Ralph W1
Thanks Don,
That is exactly the info I was looking for. I had shipped mine back,
w/o xformer, for a repair last year but wondered how does Elecraft ship
Factory built units.
Ralph W1ZK
On 6/25/2016 8:26 PM, Don Wilhelm wrote:
Ralph,
When a KPA500 is shipped for service, they recommend
What does Elecraft recommend for shipping a built KPA-500? Do KPA-500F
amps ship with the xformer installed? Not selling mine, just wondering
about buying a used one!!
W1ZK
--
Secretary USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American
Thanks for all the interest. The filter has been sold.
W1ZK
--
Secretary USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft mailing list
Home:
Priority Mail. PayPal
is Okay.
Ralph w1ZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
cing the Level
to 20% the fence pulsing is close to non existent but the pile up is not
overloading the IF.
Ralph W1ZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
The KAT500 relay switch over between two in-band segments is driving
me nuts. A lot of DXpeditions on 160 use 1823.0Khz for transmit
listening up 1-5khz. Every time the K3 goes from A RX to B TX, and back
again, it involves a cur-chunk from the KAT500 whether the tuner is in
Auto or Manual.
Snip is also a part of Windows 7. It a lot more tedious than Print but
it can be done.
W1ZK
--
Secretary USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft
>Bucket treatment: Find a big bucket large enough to hold the defective
device,
>fill the bucket with water, put the device in twice, take it out once
I've had a considerable amount of satisfaction using a sledgehammer.
VE7XF
__
and advice.
W1ZK
On 9/22/2015 2:32 PM, Ralph McClintock wrote:
I folks,
Just turned on my K3/100, SN8600 series, rig but I now have no receive
plus no transmit RF out. And, CQWW RTTY is in a few days. The K3
worked perfectly yesterday but today no RX, no TX, other than that
single (non RF) bar on RF
I folks,
Just turned on my K3/100, SN8600 series, rig but I now have no receive
plus no transmit RF out. And, CQWW RTTY is in a few days. The K3 worked
perfectly yesterday but today no RX, no TX, other than that single (non
RF) bar on RF out when keyed. It is not in Test mode, not in
.
Ralph, VE7XF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
1 - 100 of 379 matches
Mail list logo