[Elecraft] TX Test Mode garbage

that there is some leakage and that it was on their list for a fix. That was two years ago. Yes, the K3s does put out power during this clicking and it has been observed by operators who live close by. Power and SWR are noted on a digital power meter. 73, Dan

[Elecraft] Please take me off Elecraft mailing list

Not interested at this time. Thank you for a fantastic product and support☺️ Sent from my Western Electric rotary phone. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Seeking input on KPA1500 station configurations

Not sure if this has been suggested or not, but . . . . If you have plenty of room -- and you're not doing anything else(!), I think it would be interesting to have a PTT counter - a count of how many PTT closures during its lifetime. 73, Dan

Re: [Elecraft] Frustration with Elecraft

early wasn't the intent; it's heartening to see that the Elecraft community is more accepting of well-intentioned, well-written and honest feedback, and that makes me proud and happy to be an Elecraft owner. 73, - Dan C. AC2OI ___

[Elecraft] KX 2 quick memories

Could use some help on storing/recalling the quick memories for the KX2. Whenever I try to start the procedure by holding down the STORE key it reverts to an already stored 'number' memory (e.g.5) and doesn't allow me to store the current VFO A into a quick memory. Any thoughts? Dan Presley

[Elecraft] KX2 and W4OP loop

was down around 1:5/1.I will say that little speaker in the KX2 does a fine job outdoors-there was a group of us,otherwise I’d use phones.To me this is what it’s all about…! Dan Presley N7CQR n7...@arrl.net __ Elecraft mailing list Home

[Elecraft] KPA1500 Back Panel Pic

Can anyone venture a guess as to what the "cable" is underneath the amplifier in the back panel photo? Also, what type of connection is used for grounding? Dan -- N3ND __ Elecraft mailing list Home: http://mailman.qth.n

Re: [Elecraft] Should we expect something new in Dayton?

The blue in the display on the new amp would match a waterfall display on something. Perhaps a cabinet the same size of the new amp. I decided in January I was not going to buy another radio until Dayton. Dan KM6CQ __ Elecraft mailing

Re: [Elecraft] Elecraft Equipment chat group

I strongly disagree with starting another forum-there’s already plenty.And-a number of other forums I subscribe to go ‘way farther off than this one. Do us all a favor-don’t divide the knowledge. Eric and Wayne do a fine job moderating. Dan Presley N7CQR n7...@arrl.net > On May 1, 2017, a

[Elecraft] On Topic

available. I am not interesting in joining a new group, I would like to see this one get back on track. 73, Dan KM6CQ -- Sent from my iPhone 7 Plus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] WTB: Elecraft KX2

Looking for an Elecraft KX2 in excellent - like new condition. Please email me directly if you have one for sale with specs, price and a picture or 2 would be great! Thank you much Dan NB1C dan.board...@shreditfast.com __ Elecraft

[Elecraft] USED P3 Going Rate

What's the going rate for a nice P3, say a 9 - 9+, on the used market? Dan - NB1C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] Older option boards from K3 upgrade

LOL - "line-of-site contesting neighbor" = whets his call sign??? :) -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wes Stewart Sent: Tuesday, April 25, 2017 5:23 PM To: donw...@embarqmail.com; elecraft@mailman.qth.net Subject: Re: [Elecraft]

Re: [Elecraft] KX3 100 W GO KIT

That indeed is a very very nice case. Watched the video and read the comments below it. Would like to have a panel made but don't want to have to make the mods that WT8BZ had to make after buying the board. Dan - NB1C -Original Message- From: Elecraft [mailto:elecraft-boun

[Elecraft] KPA1500 LCD backlight

Dunno if anyone mentioned this, but the backlight for the LCD display on the KPA1500 seems to be a bluish color unlike the current K-Line gear. I'm wondering if this is to help match the new K4? Just thinkin' 73, Dan -- N3ND

Re: [Elecraft] Experiences using a portable HF loop

be rotated to null noise or unwanted signals out. One more nice trick in the antenna bag. Dan Presley N7CQR n7...@arrl.net > On Apr 21, 2017, at 6:24 PM, Eddy Avila <k6...@hotmail.com> wrote: > > Greetings all, I'm curious to hear from anyone using a portable HF magnetic &g

Re: [Elecraft] KPA500 mobile?

a banjo that would be a good place to start to reproduce its sound however, then you need another one shaped like a dobro and so on. Not really practical. 73, Dan KM6CQ *Don't sacrifice your hobby for the right house.* I occasionally car pool to ham events with a neighbor in his high end VW

Re: [Elecraft] Help me choose my first HF rig

this wife's, it will end you ham career. Any radio you buy from Elecraft will be a very nice rig, and have a good resale value if you want to try something different. 73, Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net

Re: [Elecraft] Help me choose my first HF rig

and said he understood and corrected it in a firmware update. They build products they like to use. That makes products we like to use. Best Regards, Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] Linear thoughts

It would be very nice to have the ability to make a unauthorized, unofficial simple mod. Maybe call it the KX3 mod. This mod would allow one to drive the amp to full output with a KX2 or KX3. Dan KM6CQ __ Elecraft mailing list Home: http

Re: [Elecraft] Linear thoughts

If you develop a internal or external tuner for it, please include a lock switch. This would allow the tuning solution to be locked in place unlike the KAT500 manual switch. Thanks,Dan -- KM6CQ Dan Baker www.km6cq.com Don't sacrifice your hobby for the right house

Re: [Elecraft] EFHW

as that wasn’t important with pi and linked outputs in your tube rigs! Now I just have to figure out a way to do this in the field…I still have some wonderful Weston meters one of the guys gave me lo those many years ago. Dan Presley N7CQR n7...@arrl.net > On Feb 12, 2017, at 10:45 AM, do

Re: [Elecraft] EFHW

the random length antenna. Thanks everyone, and I hope we all can get out and enjoy our great rigs as much as possible. The KX 2 is the radio I’ve been dreaming about for a long.long time and now I have one... Dan Presley N7CQR n7...@arrl.net > On Feb 9, 2017, at 4:03 PM, Kevin - K4VD

[Elecraft] Fwd: EFHW

through the old venerable Johnson matchbox. Now I’m just waiting for the pineapple express (local term for a warm deluge of rain) to end so I can start getting out in the woods and mountains.Us Oregonians are a bit different :)) Dan Presley N7CQR n7...@arrl.net

[Elecraft] EFHW clarification

as a counterpoise. I now have one of the nice lightweight SOTA poles which would be good with whatever wire I go with. Waiting for some decent weather in the Pacific NW :)) Dan Presley N7CQR n7...@arrl.net __ Elecraft mailing list Home: http

[Elecraft] EFHW

of portable antennas except the EFHW-just curious what the advantages might be. Dan Presley N7CQR n7...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] KIO3B RTTY AFSK problem with Transmit

VOX and not PTT) Do I need to enable PTT? I have tried switching MIKE to LINE IN to no avail. What am I missing? Any help here would be appreciated. Dan W8CAR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] K3 and Power Poles

And there are retention clips. I have a couple black ones that came with some order at one time (RigRunner I think). https://powerwerx.com/powerpole-connector-retention-clip Dan KI6X -- Message: 4 Date: Tue, 13 Sep 2016 08:53:53 -0400 From: Ramon Tristani <r.tr

[Elecraft] WTB: USED KX2 - Anyone?

Wonder if anyone on list for one reason or another wants to sell a KX2? I know its new, but just in case! Thanks much Please email me directly - dan.boardman AT shreditfast DOT com Dan - NB1C __ Elecraft mailing list Home: http

Re: [Elecraft] FOR SALE: ELECRAFT T1 ATU - Factory Built

The Elecraft has been sold - thanks to all who have replied! Dan - NB1C -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dan Boardman Sent: Sunday, August 21, 2016 1:03 PM To: Elecraft Subject: [Elecraft] FOR SALE: ELECRAFT T1 ATU - Factory Built

[Elecraft] FOR SALE: ELECRAFT T1 ATU - Factory Built

I have a Elecraft T1 (factory built) for sale - I used it ounce, Non smoking user. Sell for $125 shipped in the US - Paypal OK - ADD 3% for fees. First responder that tells me they will take it will be the lucky new owner! Thanks much Dan - NB1C

[Elecraft] KXPA100 utility - power on/off

Hello, is there any possibility to power-on/off KXPA100 using the utility program ? I have a remote location where KXPA 100 will be installed and the only option I can see is to leave the power button ON and just switch the power supply on/off via a remote controlled outlet. Thank you ! 73, Dan

[Elecraft] The amp I would like to see Elecraft build.

mobile rig. This would compliment Elecrafts theme of products much more than a legal limit amp, that really you can find anywhere. 73, Dan KM6CQ Don't sacrifice your hobby for the right house. __ Elecraft mailing list Home

[Elecraft] MACROS

mmand that would allow a pause of milliseconds before enacting the next command in a macro line. Now more than ever, with the KPOD, it would be nice not having to extinguish a macro name from the VFO-B display without having to touch the radio front panel

Re: [Elecraft] {OT} Alexloop Walkham Antenna

he 2-I suspect they're very similar. He got a hamfest deal on his so if that's an option that's a good way to go. Dan Presley N7CQR n7...@arrl.net On Jul 12, 2016, at 1:23 PM, stan levandowski wrote: > I would like to correspond with anyone who has experience using the Alexloop > antenn

[Elecraft] Alexloop VS P-Loop

dipole 8 feet off the ground, it was about the same as the Alexloop. The big difference is it will take 250 watts, the the Loops are limited to 10 watts CW. 73, Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] KPOD

er playing with it for a while I find that I like it. Now to fix the SFI. 73, Dan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] Battery Pack Mod for the KX3

, Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

Re: [Elecraft] Field Day Fun Killers

but nabbed him easy with 5 W. The KX2 is perfect for this type of operation. Also, as you said weather was perfect :) Dan Presley N7CQR n7...@arrl.net On Jun 28, 2016, at 8:31 PM, kev...@coho.net wrote: > In the Coast Range on Sunday it rose to a scorching 77 degrees! > > FD i

[Elecraft] KX2 and KX3 Accessory Suggestion

Perhaps a smallish ergonomic hand held up-down tuning/band changing thumb operated tuning button for the KX2 and/or KX3? Dan - NB1C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] KX 2 cheat sheet?

I know it's new, but has anyone had a chance to work up a little 'cheat sheet' for the KX 2? Thanks-love this rig. Dan Presley N7CQR n7...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] WTB: KX2 UsED

Yes I am well aware that Elecraft has these in stock for shipping. If by CHANCE someone has purchased a KX2 and for one reason or another wants to sell it I would be interested in purchasing it. Please email me directly with any offers. Thanks much, one never knows! Dan - NB1C dan.board

Re: [Elecraft] KX2 utility for mac?

in the menu, but can't recall it at the moment. Not audible on the speaker, and same with different phones.Ring any bells with anyone? Dan Presley N7CQR n7...@arrl.net On Jun 5, 2016, at 2:08 PM, Phil Wheeler wrote: > Not yet. But my two Macs are dual-boot with Win 10 and BootCamp. >

[Elecraft] KX2 utility for mac?

Does anyone know if the KX2 utility program is available for Macs? I only see a windows version on the software page. Alternatively-can I use the KX3 utility program for the 2? Thanks. Dan Presley N7CQR n7...@arrl.net __ Elecraft

[Elecraft] KX2 inaugural qso!

right back-FW2JJ dx from Wallis Island! 5W into my delta loop. I think I'm gonna like this little radio-but I already knew that -currently owning K2 #1010 and a KX3...summer SOTA with the loop antenna is coming up. Thanks guys for a wonderful little rig! Dan Presley N7CQR n7...@arrl.net

Re: [Elecraft] KX2 on JT65 & JT9 ??

Edward Your test results are much appreciated! Any very informative! Thank you kind sir Would be interesting to be able to compare a newer KX3 with rev E boards to your past test results 73 Dan > On May 30, 2016, at 2:05 PM, Edward R Cole <kl...@acsalaska.net> wrote: > >

Re: [Elecraft] KX2 on JT65 & JT9 ??

Jim When one makes it personal I'm done Have a happy day and enjoy ham radio 72 > On May 30, 2016, at 1:24 PM, Jim Brown wrote: > >> On Mon,5/30/2016 4:50 AM, D Howard wrote: >> I thought at the price I paid for the KX3 I shouldn't have to do the >> compensation

Re: [Elecraft] KX2 on JT65 & JT9 ??

Luke Thanks - just what I needed to know! Have you tried JT9 ? Perhaps some sort of heatsink/handles added to the case might help?? 73 Dan VA3MA On 2016-05-29, at 22:37, Luke <auric...@yahoo.com> wrote: Hmm, not sure why it cut out my message. Here's what I wrote: I've used my KX2 o

Re: [Elecraft] KX2 on JT65 & JT9 ??

Hi thanks I’ve read all these c comments by others - but I have yet to get a direct confirmation from someone who has operated the KX2 enthuse digital modes! Ha! Dan > On May 29, 2016, at 3:46 PM, Phil Wheeler <w...@socal.rr.com> wrote: > > One of the eham reviewers mentione

[Elecraft] KX2 on JT65 & JT9 ??

Has anyone had the opportunity to see if the KX2 out of the box will be stable enough to run JT65 & JT9 Would appreciate feedback as I’m apartment dweller and only run these digital modes with compromised antenna Thanks Dan V

[Elecraft] In case you missed it.

This is good. https://youtu.be/kiuO0ddcJFQ -- KM6CQ Dan Baker __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

Re: [Elecraft] Narrow Digital Modes ??

risingly > well (normally I use tower mounted preamps). > > 73, Ed - KL7UW > > Date: Tue, 24 May 2016 08:57:27 -0400 > From: Dan - VA3MA <va...@me.com> > To: Elecraft <elecraft@mailman.qth.net> > Subject: [Elecraft] Narrow Digital Modes ?? > Message-ID: <36

[Elecraft] Narrow Digital Modes ??

Could Elecraft explain why the KX2 design doesn't allow operating say JT65 out of the box? What prohibits manufacturing the rig to do the narrow digital modes? Would be helpful to know Thanks Dan VA3MA I notice Wayne is ignoring explaining their design decision - commenting on all other

Re: [Elecraft] Narrow Digital Modes ??

Sorry I didn't mean to imply decoding JT modes inside the KX2 I was wondering why the rig is not frequency stable for narrow digital modes using a PC for encode/decode. Why could it not be manufactured more stable?? Dan VA3MA On 2016-05-24, at 9:11, Matt Maguire <matt.vk...@gmail.com>

[Elecraft] Narrow Digital Modes ??

Could Elecraft explain why the KX2 design doesn't allow operating say JT65 out of the box? What prohibits manufacturing the rig to do the narrow digital modes? Would be helpful to know Thanks Dan VA3MA __ Elecraft mailing list Home

[Elecraft] KX2 stable enough for JT9 ??

Any intelligence on narrow Digit modes? Dan VA3MA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

[Elecraft] FS: Elecraft T1 Automatic Antenna Tuner

Only used it a few times - 9/10 in nice condition - non smoker $135 shipped Dan - NB1C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] For Sale; KX3

back up rig and has had very little use. It just sits on my desk. Below are all the options listed. I have $1970 into this. I will ship it to your door for $1550 I prefer Paypal. Please contact me with any questions. Thanks, Dan *Pwr Cable, 3ft. APP to 2.1MM $14.95* *KX3-2M-AT 2M All-Mode Internal

[Elecraft] Will the K4 look like this?

The MB1 Transceiver http://sunsdr.eu/product/mb1/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] For Sale at Visalia.

Power Supply $45 KX3 Fully Loaded with 2 Meters/Mic and Cable Kit. $1490 SGC-500 $750 I can demo that, it is installed in my pickup. Please contact me with any questions. Thanks,Dan KM6CQ __ Elecraft mailing list Home: http

[Elecraft] For Sale; KXPA100 SOLD TNX

Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email

[Elecraft] For Sale; KXPA100

. Delivered to my door it was $1247 Delivered to your door for $1025 If you want the PX3 with it and the "Nifty" stand it is $1545 delivered. Thanks, Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinf

Re: [Elecraft] Unsoldering

The Pro Wick is available on the Bay place. What size{s} do you prefer Petr? Dan - NB1C -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Petr, OK1RP/M0SIS Sent: Monday, February 22, 2016 7:07 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft

Re: [Elecraft] KPA500 problem

Mike: Suggest changing fuses in input fuse block. I have experienced an intermittent fuse problem in other equipment in the past that produced very puzzling symptoms. 73 and good luck, Dan AC6DM -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-problem

[Elecraft] I had a KX4 Vision

nodded off for a second. But I believe Eric and Wayne can build you just about anything you are willing to pay for. Dan KM6CQ -- KM6CQ Dan Baker __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] K3 For Sale

er dot net (the address is a leftover from my old call). Dan, K0ZL, formerly KI0OV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] KIO3B Audio Spec

overed transmit audio while in TX TEST a viable way to eliminate the RF and XG3 related variables or have I missed something? If it is viable, I would be interested in the same being done with a KIO3B for comparison purposes. 73, Dan AE9K -- View this message in context: http://elecraft.365

Re: [Elecraft] KIO3B Audio Spec

alid means of measuring the performance of the USB audio path - whether with the KIO3B or other USB audio interface. Can I, for example, conclude from my test that my DigiKeyer/K3 path has a -110 dB noise floor? 73, Dan AE9K -- View this message in context: http://elecraft.365791.n2.nabble

Re: [Elecraft] KIO3B Audio Spec

the price tag seems acceptable to me. Dan AE9K -- View this message in context: http://elecraft.365791.n2.nabble.com/K3IOB-tp7611605p7612028.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home

[Elecraft] FS: KXPD3 Precision Iambic Keyer Paddle NEW - INCLUDES KXPD3MDKT UPDATE KIT

Still available: I have a brand new unused KXPD3 I bought with my KX3 (also includes KXPD3MDKT update kit)- I use a different paddle - this one is in the bag it came in never removed. SELL for $105.00 shipped. Dan - NB1C Please contact me directly if interested

[Elecraft] FS: KXPD3 Precision Iambic Keyer Paddle NEW

I have a brand new unused KXPD3 I bought with my KX3 - I use a different paddle - this one is in the bag it came in. SELL for $110.00 shipped. Dan - NB1C Please contact me directly if interested. __ Elecraft mailing list Home: http

[Elecraft] WTB: Elecraft XG3 Signal Source

Looking to buy an Elecraft XG3 Signal Gen.. if you have one to sell please email me directly. Thank you much Dan - NB1C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

Re: [Elecraft] [K3] Test Mode TX and TX Monitor?

Phil: Do you have a K3S by any chance. My K3S actually transmits a signal when in TEST mode! When I told Elecraft about it, they shrugged their heads like it can't be. The TX power appears both on my P3 (with TX MON showing both PEP and SWR), and also my LP-100A wattmeter. It's only

[Elecraft] [K3] Test Mode TX and TX Monitor?

Elecraft to witness this (and yes, I will include the bandpass filter), but rumor has it that their repair center is backlogged and it's too close to contest season to risk being without. My K3S works fine except for these problems. 73, Dan ___

[Elecraft] What crystal filter do you use the most?

that Elecraft no longer makes the 200 Hz filter. Shame. If I was going to get only one CW filter, it would probably be the 400 Hz jobber. 73, Dan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] REMOVE ME FROM YOUR EMAIL LIST!!!

FUNNY!!! He can never leave -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of jim Sent: Monday, September 28, 2015 11:57 AM To: 'Rick Ross'; Elecraft@mailman.qth.net Subject: Re: [Elecraft] REMOVE ME FROM YOUR EMAIL LIST!!!

[Elecraft] K3 Hum on mic between 2 rigs

efore I go to the expense of purchasing a power supply large enough to power box rigs at the same time, will this eliminate my hum or ground loop? Thanks in advance. 73, Dan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/ele

[Elecraft] KX3 Multi-two environment

Has anyone used a KX3 in a multi-two environment? Low power? High power? Specifically, how'd it hold up? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] K3/K3S Pin 1 question

ground, my question is, "At the switchbox, should I tie XLR pins 1 and 2 together and only switch XLR pin 3 between radios?" IOW, should XLR pins 1 and 2 be chassis grounded or should I chassis ground pin 1 and switch both XLR pins 2 and 3? Thanks in advance

[Elecraft] KIO3B

If I recall, the K3S has now caught up with orders. If that is true, when can we expect the KIO3B module to be offered for K3 upgrades? Dan -- N3ND __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

Re: [Elecraft] P3 - still in trouble with new firmware

problem with higher resolutions? Dan AC6DM -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-still-in-trouble-with-new-firmware-tp7605764p7605830.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] P3 firmware 1.50 displays -dBm scale ending with 9

Yes, same here. Notified Paul Saffren. 73, Dan AC6DM -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-firmware-1-50-displays-dBm-scale-ending-with-9-tp7605837p7605842.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] I wonder how many folks have had buyers remorse on a K3/K3S purchase?

if anyone is interested. 73, Dan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help

Re: [Elecraft] Firmware for P3TXMON function

Have you loaded the new SVGA firmware 1.24? You need this as well as the P3 firmware 1.50 for the SVGA to function correctly. I've installed both and have not observed the problems reported. 73, Dan AC6DM -- View this message in context: http://elecraft.365791.n2.nabble.com/Firmware

Re: [Elecraft] P3 - still in trouble with new firmware

today. 73, Dan AC6DM -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-still-in-trouble-with-new-firmware-tp7605764p7605815.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

[Elecraft] K3 VOX by mode only?

I'd like to use VOX on digital modes, but never on phone and I see no way to set it up by mode such that the gain can be set to a certain value on phone (000), but higher on digital modes. Am I correct? Yes, I know I can turn it on and off manually.

[Elecraft] 200 Hz 5-pole filter

Am looking for a K3, 200 Hz 5-pole filter since Elecraft no longer sells them. Anyone out there have a spare? 73, Dan - N3ND __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

[Elecraft] Dayton Orders

Just curious if anyone has yet received a confirmation of orders placed at Dayton? Dan -- N3ND __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] Cooler KX Plus Heatsink Install

very smoothly. I am very pleased with the precision fit. You did a very nice job on the product. I will highly recommend it. Best Regards, Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] Elecraft mailing list submissions

Sent from my Western Electric rotary phone. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] WTB: Fred Cadys book on the KX3

If anyone has Fred Cadys book on the KX3 - either version I would like to purchase a copy. Please contact me off list. Thank you Dan Boardman - NB1C shredman...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] Elecraft] KAT500 Feature Request

Only on 160 does it hunt when placed in the manual mode. I am not sure why since I am using a 160 loop. Dan On Fri, Apr 3, 2015 at 8:04 PM, Fred C. Jensen k6...@foothill.net wrote: Sometime back, a FW update has the Tuner following as you tune. You don't have to tx. Put tuner into manual

[Elecraft] KAT500 Feature Request

Easter. Dan, KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

Re: [Elecraft] Split Operation

to hit split so xmit is on VFO B. 2. Permits perusing the cacophony of pileup callers with the larger, more easily used large VFO A knob. Am I missing something? Dan AC6DM -- View this message in context: http://elecraft.365791.n2.nabble.com/Split-Operation-tp7565848p7598936.html Sent from

Re: [Elecraft] Split Operation

had missed it prior. Otherwise, your suggestion of offering a mode to display the split mode status in a more in your face manner looks like a good idea. 73, Dan AC6DM -- View this message in context: http://elecraft.365791.n2.nabble.com/Split-Operation-tp7565848p7598987.html Sent from

Re: [Elecraft] KX3 case advice

, Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] kpa1500?

My feature request is for a 500 W mobile version of the KPA500. I think the Mississippi company is the only one making a 500 watt mobile amp now. Seems like there is an opportunity to be had. I would gladly donate my ALS-500 to Wayne and Eric so they could see how not to build one. Dan KM6CQ

Re: [Elecraft] KXPA100 Intermittent VSWR Issues

will disappear. In the meantime I use the KAT500. Its all to frustrating to be in a QSO and have it act up. It kind of behaves like the KAT500 did before they upgraded the firmware. I am sure they will get around to taking care of it. 73, Dan KM6CQ I've run into several occasions where in mid-CW

Re: [Elecraft] KXPA100 Intermittent VSWR Issues

I am running the latest firmware. And it does it in manual mode also. Maybe Elecraft does need to see it. Dan On Monday, December 8, 2014, Cady, Fred fc...@ece.montana.edu wrote: Are you using AUTO or MAN mode? You should be using MAN mode after training the tuner. Cheers, Fred KE7X

Re: [Elecraft] HF noise.....10 M

which changes frequency during the welding operation; starting high and decreasing in frequency as the weld is accomplished. Such welders are not supposed to operate in the ten meter band in the US, so I suspect they are rogue, operating international. Dan AC6DM Anyone have any idea what those

<    1   2   3   4   5   6   7   8   >