It's normal, Dave. I've been trying to get Elecraft to change this for years.
That and the adjustable
bandwidth for the APF always seem to fall through the cracks. I finally bought a
Autek QF-1A
which helps immensely.
73, Roger
On 2/12/2015 12:38 AM, dyarnes wrote:
Hi All,
I probably
Hi All,
I probably missed this somewhere as I don't do SSB all that much. I can do
CW in SSB mode, but not when I'm operating split. It works fine if I am not
operating split. I do have the menu set for SSB + CW. Am I doing something
wrong?
Dave W7AQK
The real answer here is that the K3 always indicates the carrier frequency.
There is no shift on SSB.
When changing from SSB to CW, the receive frequency is shifted by the
amount of the sidetone pitch.
The result is that the CW signal is now at an audio frequency of zero,
which neither your
Subject: Re: [Elecraft] CW on SSB
Message-ID: 5373de83.5090...@necg.de
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
And enable auto-shift in the menu when switching from CW to SSB and vice
versa, otherwise you will still have to retune to get signal into the
passband again.
73, Olli
. If on the wrong sideband you will *not* hear it.
73, Ed - KL7UW
-
From: Oliver Dr?se dro...@necg.de
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] CW on SSB
Message-ID: 5373de83.5090...@necg.de
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
And enable
. If on the wrong sideband you will *not* hear it.
73, Ed - KL7UW
-
From: Oliver Dr?se dro...@necg.de
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] CW on SSB
Message-ID: 5373de83.5090...@necg.de
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Dr?se dro...@necg.de
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] CW on SSB
Message-ID: 5373de83.5090...@necg.de
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
And enable auto-shift in the menu when switching from CW to SSB and vice
versa, otherwise you will still have
I notice that I can often hear CW on SSB but when I switch to CW, the signal
is lost. I'm talking about very strong signals, not stuff in the background.
Is there something that I'm doing wrong to not be able to copy them on CW?
--
View this message in context:
...@mailman.qth.net] On Behalf Of HREFAB
Sent: Wednesday, May 14, 2014 4:52 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] CW on SSB
I notice that I can often hear CW on SSB but when I switch to CW, the signal
is lost. I'm talking about very strong signals, not stuff in the background.
Is there something
Sent: Wednesday, May 14, 2014 4:52 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] CW on SSB
I notice that I can often hear CW on SSB but when I switch to CW, the signal
is lost. I'm talking about very strong signals, not stuff in the background.
Is there something that I'm doing wrong
Sorry for not identifying the mode (it's a KX3) now should be reflected in
the title. Anyway, thanks for the input. Switching to rev doesn't seem to
have any effect. Seems pretty odd to me that I can hear the signal on SSB
but not on CW (Not to say that I don't get CW signals, just that some which
: [Elecraft] CW on SSB
Sorry for not identifying the mode (it's a KX3) now should be reflected in
the title. Anyway, thanks for the input. Switching to rev doesn't seem to
have any effect. Seems pretty odd to me that I can hear the signal on SSB
but not on CW (Not to say that I don't get CW signals
...@mailman.qth.net] On Behalf Of
HREFAB
Sent: Wednesday, May 14, 2014 4:52 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] CW on SSB
I notice that I can often hear CW on SSB but when I switch to CW, the
signal
is lost. I'm talking about very strong signals, not stuff in the
background.
Is there something
Not true Pete:
CONFIG: CW WGHT and tap '1' until you see 'SSB+CW'
73
Tom G3OLB
Besides, you can't key the rig if you're in ssb.
Pete, W1RM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
When I read the info about being able to send CW while in USB/LSB, on the same
freq. I set it up on my K3. And it works fine, except that I notice that when
in SSB Mode, and keying with my paddle or SK, that the SWR bars disappear. That
is, if I tune the antenna to the freq I’m on, and lets
Hi,
I thought that there was a setting that would permit me to send cw while
listening in the SSB mode.
Is this possible? Seems to me I had this set up at one time, but cannot
find the right combination to do so now.
Thanks,
Phil K3TUF
Hi Phil,
Your subject line doesn't indicate a K3, but seems likely that's what
the question is about.
1. Go to CONFIG:CW WGHT
2. Press the '1' key until you see SSB +CW
3. Exit CONFIG:CW WGHT
This is in the Owner's Manual, on p54 (in Rev D5).
73,
On Fri, 24 Feb 2012 13:34:54 -0500, you
Bingo, that's it.
Thanks all,
73,
Phil K3TUF
On 2/24/2012 2:19 PM, Matt Zilmer wrote:
Hi Phil,
Your subject line doesn't indicate a K3, but seems likely that's what
the question is about.
1. Go to CONFIG:CW WGHT
2. Press the '1' key until you see SSB +CW
3. Exit CONFIG:CW WGHT
This
Hi
Can this be done on the K2 as well? I was looking through the manual but can't
seem to find it. I know this can be done on the KX-1
Ariel NY4G
__
Elecraft mailing list
Home:
When in ssb, I have an acceptable noise level, but change to cw and wow does it
ever risewhat is going on? or as they say in brooklyn
Wha hoppen?
If you don't change direction you WILL arrive exactly where you're
headed!! Susan Meckley, Skipper W7KFI-mm AFA9SM
Subject: [Elecraft] cw vs ssb noise level
When in ssb, I have an acceptable noise level, but change to cw and wow does
it ever risewhat is going on? or as they say in brooklyn
Wha hoppen?
If you don't change direction you WILL arrive exactly where you're headed!!
Susan Meckley, Skipper
21 matches
Mail list logo
