[Elecraft] K3/100 + DX4WIN N1MM

2007-12-04 Thread Gary Bartlett VE1RGB
All functions of K3/100 #095 work flawlessly (within the rig's current limitations) and the radio now communicates with a laptop for FW updates. Now for rig control. Has anyone out there made their K3 work with DX4WIN and/or N1MM that could either provide the setup parameters, or at least

RE: [Elecraft] K3/100 + DX4WIN N1MM

2007-12-04 Thread Don Nesbitt
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gary Bartlett VE1RGB Sent: Tuesday, December 04, 2007 1:34 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3/100 + DX4WIN N1MM SNIP. Has anyone out there made their K3 work with DX4WIN and/or N1MM

Re: [Elecraft] K3/100 + DX4WIN N1MM

2007-12-04 Thread Vic K2VCO
Gary Bartlett VE1RGB wrote: All functions of K3/100 #095 work flawlessly (within the rig's current limitations) and the radio now communicates with a laptop for FW updates. Now for rig control. Has anyone out there made their K3 work with DX4WIN and/or N1MM that could either provide the

RE: [Elecraft] K3/100 + DX4WIN N1MM

2007-12-04 Thread Don Nesbitt
that and have the T-shirt! 73 -- Don -Original Message- From: Vic K2VCO [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 04, 2007 2:06 PM To: [EMAIL PROTECTED] Cc: 'Gary Bartlett VE1RGB'; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3/100 + DX4WIN N1MM Don Nesbitt wrote: Set: 4800, N

Re: [Elecraft] K3/100 + DX4WIN N1MM

2007-12-04 Thread Vic K2VCO
Don Nesbitt wrote: Yep - this is true - not only that, but be aware if you are using DTR/RTS to send code from N1MM (I presume other software as well) that even if you have NOT turned VOX to the ON position on the K3, the DTR/RTS keying in conjunction with ENABLING the PTT control in N1MM

RE: [Elecraft] K3/100 + DX4WIN N1MM

2007-12-04 Thread Don Nesbitt
You know Gary, I have not done a very good job of covered all the bases here - sorry 'bout that! In order to avoid the scenario that I painted below, you could take a number of steps. For instance, in N1MM config, don't set RTS=PTT instead set RTS=Always Off, and at the same time, don't put a

Re: [Elecraft] K3/100 + DX4WIN N1MM

2007-12-04 Thread Gary Bartlett VE1RGB
: Don Nesbitt [EMAIL PROTECTED] To: 'Vic K2VCO' [EMAIL PROTECTED]; 'Gary Bartlett VE1RGB' [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Tuesday, December 04, 2007 5:35 PM Subject: RE: [Elecraft] K3/100 + DX4WIN N1MM You know Gary, I have not done a very good job of covered all the bases