[Elecraft] K3 RTTY PROBLEM

2014-12-21 Thread Bert via Elecraft
I tried to get on the OK DX RTTY contest this weekend using my K3. I used N1MM+ with MMTTY and configured MMTTY as usual. Hit the TX button in MMTTY, the K3 went into transmit mode with no output! I'm using FW version 5.01 on the K3. I eventually resolved the problem, but don't know the

Re: [Elecraft] K3 RTTY PROBLEM

2014-12-21 Thread Don Wilhelm
Bert, I suspect that you did not have the K3 mark frequency set to match that which was set in MMTTY. The PITCH button will allow you to change the K3 mark frequency to match that used in MMTTY. 73, Don W3FPR On 12/21/2014 5:53 PM, Bert via Elecraft wrote: I tried to get on the OK DX RTTY

[Elecraft] [K3] RTTY problem

2012-01-15 Thread Mike
Using MMTTY and AFSK, a USB sound card, cables to line in/out. The proper sound card is selected in MMTTY. MAIN:MIC SEL is Lin In, the level is 7. LIN OUT level is 8. The sound card's Windows sliders are at about 2/3 scale, nothing muted. The sound (Creative) card is producing a diddle. VOX

Re: [Elecraft] [K3] RTTY problem

2012-01-15 Thread Mike
Left off 73, Mike NF4L On 1/15/2012 7:23 PM, Mike wrote: Using MMTTY and AFSK, a USB sound card, cables to line in/out. The proper sound card is selected in MMTTY. MAIN:MIC SEL is Lin In, the level is 7. LIN OUT level is 8. The sound card's Windows sliders are at about 2/3 scale, nothing

Re: [Elecraft] K3 RTTY problem

2009-02-04 Thread David Wilburn
If you are plugging into a laptop, make sure the port is set to line in. Mine comes up and asks me, whenever I plug something in. Dave Wilburn NM4M R. Kevin Stover wrote: Which program are you using? Did this ever work? What changes have you made since it worked? The line out on the K3

[Elecraft] K3 RTTY problem

2009-02-03 Thread n1ix1
I posted this Sunday bust since then I have been having email problems. If you responded please send it again. I am having a problem with receiving RTTY signals. It worked before so I assume it is something I have set incorrectly. There is no? display of any text or even jiberish on any

Re: [Elecraft] K3 RTTY problem

2009-02-03 Thread R. Kevin Stover
Which program are you using? Did this ever work? What changes have you made since it worked? The line out on the K3 is a low level line out and would sound attenuated compared to the level on the speaker/phones jack. You've got the level as high as it will go on the K3, swapped the audio cable

[Elecraft] K3 RTTY problem

2009-02-01 Thread N1IX
I am having a problem with receiving RTTY signals. It worked before so I assume it is something I have set incorrectly. There is no display of anything on any of the RTTY applications. No waterfall, nothing at all. I have tried different computers and multiple applications with the same

Re: [Elecraft] K3 RTTY problem

2009-02-01 Thread Dave Hachadorian
...@verizon.net To: elecraft@mailman.qth.net Sent: Sunday, February 01, 2009 9:17 PM Subject: [Elecraft] K3 RTTY problem I am having a problem with receiving RTTY signals. It worked before so I assume it is something I have set incorrectly. There is no display of anything on any of the RTTY applications

[Elecraft] K3 RTTY Problem

2009-02-01 Thread n1ix1
I am having a problem with receiving RTTY signals. It worked before so I assume it is something I have set incorrectly. There is no? display of anything on any of the RTTY applications. No waterfall, nothing at all. I have tried different computers and multiple applications with the same

Re: [Elecraft] K3 RTTY Problem

2009-02-01 Thread Lyle Johnson
I am having a problem with receiving RTTY signals. It worked before so I assume it is something I have set incorrectly. There is no display of anything on any of the RTTY applications. No waterfall, nothing at all. I have tried different computers and multiple applications with the same