I am selling my microHAM microKEYER III with the DB37-EL-K3R cable for a
K3/K3S. It's in excellent condition.
Complete information at
https://www.microham.com/contents/en-us/d126_MKIII.html .
New price at DX Engineering is $570.
I also have a PS/2 numeric keypad with extension cable, for
This item has been sold (in record timethank you!).
On 9/24/2020 9:50 AM, Gene Sochor wrote:
New, never used, still in original carton, MicroKeyer II with K3
cableset, external CW/voice memory keypad & CD.
$250 including shipping within USA. Was $430+ when purchased. PayPal
accepted. N9SW
On 5/25/2016 2:08 PM, j...@kk9a.com wrote:
>
> Check the internal jumpers.
The only internal jumpers in microKEYER II control bias to the front
and back mic jacks.
The fourth unit worked fine when I previously used it with a Yaesu
but I cannot get it to work with my K3S for some reason.
Check the internal jumpers. I assume that you assigned a com port and
selected K3 38400 in the router. I have four DigiKeyer IIs and I can
only get three working with the K3S . The fourth unit worked fine when I
previously used it with a Yaesu but I cannot get it to work with my K3S
for some
Is the K3S RS232 set to 38400 b?
>From HK3W
Wed May 25 07:41:45 EDT 2016
The Microham program does not recognize de K3
This is how I have it connected:
1. The Y cable is conected to the K3S ACC port.
2. One of the Y legs goes to the MicroHam's ACC.
3. The other leg of the Y cable goes to the
I need your help please!!
The Microham program does not recognize de K3
This is how I have it connected:
1. The Y cable is conected to the K3S ACC port.
2. One of the Y legs goes to the MicroHam's ACC.
3. The other leg of the Y cable goes to the XCVR port on the KAT500.
4. The E8504643 cable
microKEYER II with K3 DB-37 is sold.
Fred/N0AZZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
I have an excellent condition Microham Microkeyer II along with the DB37
K3R cable set for the K3 rear panel. $325
YAMAHA CM500 headset with mic plug modified for KX3 (broke out a female RCA
for PTT). $30
73
Greg
AB7R
360-320-3436
Ab7r at cablespeed dot com
Thought I would post this here before putting it on the swap sites.
I have an excellent condition Microkeyer II with a K3R cable set (rear panel
mic
connection), an extra cable set for a TS-480, iLink to serial cable (SteppIR
control?) and a PS2 keypad.
$400 shipped CONUS.
Ooops...sorry. That was supposed to be $375.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Mon Apr 27 11:03 , Greg - AB7R sent:
Thought I would post this here before putting it on the swap sites.
I have an excellent condition Microkeyer II with a K3R cable set (rear
Just setting up my new K3 with sub receiver.
I have the Original Microkeyer and got the matching cable set for the K3
Question is:
There are two connectors that I do not know where to connect
1.RCA female marked INHIBIT
2. Female mini-plug marked SUB RX
Where do these go?
Thanks for any help
Jay
forum.
Dick, K6KR
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jay Rodaman
Sent: Monday, January 19, 2009 8:09 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Microkeyer
Just setting up my new K3 with sub receiver.
I have
Of Dick
Dievendorff
Sent: Monday, January 19, 2009 12:30 PM
To: 'Jay Rodaman'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Microkeyer
The female mini-plug marked SUB RX is for a 1/8 stereo
cable that goes into the back of a microHAM MK2R or MK2R+ for
subreceiver audio in. The 37
I know several of you out there have this set up, and this has been my second
biggest purchase since the K3. Only problem is, it's been no where near the
'plug and play' that everyone else says it's supposed to be. Part of that
is my fault, I'm running windows XP under VMware - but I cant trace
Did you set the cw paddle in config menu to =dash ?
Don...w2xb
cptpatmcd wrote:
I know several of you out there have this set up, and this has been my
second biggest purchase since the K3. Only problem is, it's been no where
near the 'plug and play' that everyone else says it's
Hi Folks,
I have been trying to hook my K2 to a microham microkeyer. I have the rx
audio working OK via J5 and also the cw, but cannot get the tx audio
(either afsk or wav files) to work, although the PTT works fine. The mic
is set up for Kenwood as microham recommend and works with a kenwood
Steve
For my K2, the MicroHam Audio Switching is set as:
Follow Radio Mode
CW: AAA
Voice: ABA
Digital: CCC
with Allow custom settings checked
Bob
KD8CGH
KX1, K2, K3
--
View this message in context:
http://www.nabble.com/microkeyer-and-K2-tp14646978p14654310.html
Sent from
I've never been able to figure out how to send or receive RTTY or PSK with
or without the MicroKeyer.
My normal contest mode is WriteLog talking to the K2 (or now the K3) through
the MicroKeyer with both a keyboard and paddle plugged into the MicroKeyer.
I can use the keyboard or paddle for
PROTECTED] On Behalf Of Craig Rairdin
Sent: Wednesday, February 08, 2006 1:05 AM
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] microKeyer with K2/100
Did you get the K2 cable set with the microKEYER? That makes it a little
easier.
I hooked up the audio cable internal to the K2 as instructed
It would seem that I would
have to rig up something to parallel off of J5 and make a new1/8
connector to have stereo output. I wonder why I couldn't just use
the headphones connector ? Did you make a new connector in this way ?
If you use the headphone connector you disconnect the K2's
. Hall, MD'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] microKeyer with K2/100
It would seem that I would
have to rig up something to parallel off of J5 and make a new1/8
connector to have stereo output. I wonder why I couldn't just use
the headphones connector ? Did you make a new
James
If you look in the box your cable came in you should find a female
stereo 1/8 plug and about 12 inches of black shielded audio cable. I
used a three pin Moldex style jack at J5 (same style as the frequency
counter but with three pins) and then used a matching plug on the
shielded
Hello all:
I received a microKeyer for Christmas and am just now getting around to
working with it. I reviewed the questions that were submitted to this
reflector back in October, and I have a few questions.
The microKeyer instructions for the K2 cable set involves what appears to be
a cable to
Hello all:
I received a microKeyer for Christmas and am just now getting around to
working with it. I reviewed the questions that were submitted to this
reflector back in October, and I have a few questions.
The microKeyer instructions for the K2 cable set involves what appears to be
a cable to
CW through my logging program.
Craig
NZ0R
K1 #1966
K2/100 #4941
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James C. Hall, MD
Sent: Tuesday, February 07, 2006 10:49 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] microKeyer with K2/100
Hello all:
I
25 matches
Mail list logo
