Re: [Elecraft] Settings for Digital use

2019-03-12 Thread JAY
Thanks so much for the info I will be trying it and other suggestions soon. On Tue, Mar 12, 2019 at 2:18 PM Joe Subich, W4TV wrote: > > Are you using DATA A for most daata modes and AFSK A for RTTY? > > Have you made sure there is *nothing* connected to the Line In jack? > > Have you confirmed t

Re: [Elecraft] Settings for Digital use

2019-03-12 Thread Joe Subich, W4TV
Are you using DATA A for most daata modes and AFSK A for RTTY? Have you made sure there is *nothing* connected to the Line In jack? Have you confirmed that MENU:MIC+LINE = OFF? *AFTER* selecting DATA A/FSK A have you set MENU:MIC SEL = Line In? *AFTER* selecting DATA A/AFSK A have you adjust

Re: [Elecraft] Settings for Digital use

2019-03-12 Thread Don Wilhelm
Jay, Do you have the soundcard (AUDIO CODEC) properly defined as the soundcard in your application software? That is the 1st step to check. Secondly, are you driving the soundcard output audio to a sufficient level to illuminate 4 bars solid on the ALC meter with the 5th bar flashing? Depe

Re: [Elecraft] Settings for Digital use

2019-03-12 Thread Barry
work well this way. This is what I do and have had no problems. 73, Barry K3NDM -- Original Message -- From: "JAY" To: Elecraft@mailman.qth.net Sent: 3/12/2019 11:23:52 AM Subject: [Elecraft] Settings for Digital use I have the KI03BU installed.No problem RX but unable to

[Elecraft] Settings for Digital use

2019-03-12 Thread JAY
I have the KI03BU installed.No problem RX but unable to TX. I know there has to be some settings I am missing. This was installed at Elecraft. -- 73 KI4TXP JAY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/ele