[Elecraft] Thanks All Who Replied…..

I want to thank the five or six of you fine gentlemen who responded to my posting a week ago looking for a KXPA100 amplifier. I found one at a great price and it is on its’ way to me now as I type these lines. 73, Michael, W1RC Marblehead MA

[Elecraft] Thanks!

Thanks to all who suggested a solution! Most of the hams on this list could easily work for the engineering or design departments at Elecraft. Sadly I am not one of them. I didn’t realize the mistake I was making when I did a EEinit on my K3S without a current config file. Fortunately Elecraft

[Elecraft] Thanks, Elecraft!

I compared K2 and KX3 side by side. K2 had smoother receive and transmit audio. KX3 works but you enjoy K2. Ignacy, NO9E I wanted to use a vintage rig for SKN, and with my Heathkits out of action, I turned to my trusty K2--little used since the KX3 and KX2 came out. What a joy this radio is to

[Elecraft] Thanks, Elecraft!

I wanted to use a vintage rig for SKN, and with my Heathkits out of action, I turned to my trusty K2--little used since the KX3 and KX2 came out. What a joy this radio is to use!  I had forgotten what a gem it is.  Thanks, Elecraft! 73 es HNY, Eric WD6DBM Sent from Yahoo Mail on Android

[Elecraft] Thanks all around

It is not at all unusual for the Reflector to carry posts thanking and in praise of Eric, Wayne, Jack, Alan, their colleagues, and Elecraft in general. And in those I concur. I would like to offer a similar kudos to the Reflector participants as well. My recent request for advice about

Re: [Elecraft] Thanks for the help

Yes Brandon is tops! 73 Dwight NS9I On 10/30/2018 10:53 AM, Gerry Villhauer wrote: Just a note about the customer service I received from Elecraft. I have been having a problem getting my newly acquired K3/0 mini and Remoterig to work over the internet. I received a callback from Brandon,

[Elecraft] Thanks for the help

Just a note about the customer service I received from Elecraft. I have been having a problem getting my newly acquired K3/0 mini and Remoterig to work over the internet. I received a callback from Brandon, he very excellently, talked me through the setup and got the problem solved. I have

[Elecraft] Thanks

Thanks Bob that is it. Wish this Mac would stop thinking that it knows what I want to say Hi. Ron VE7YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Thanks - re wiring for proposed KPA1500

Many thanks to the many people who replied both on the reflector and privately, with a great deal of thoughtful advice. I am now in the process of trying to hire an electrician to come to my QTH – which is 18 miles one way from the nearest town and almost 40 from the nearest city – whereupon I

[Elecraft] Thanks to all for many great suggestions about a PTT Switch

Following Kevin Stover’s and Don Wilhelm’s advice – a normally open push button mounted in a film can or in a Sharpie cap respectively -- I have settled on fitting a button switch into a tennis ball . . . . If I drop it, it might come right back With their usual

Re: [Elecraft] Thanks for all the portable operation photos so far

Jim K8MR -Original Message- From: Eric Swartz - WA6HHQ, Elecraft <e...@elecraft.com> To: Wayne Burdick <n...@elecraft.com> Cc: Elecraft Reflector <elecraft@mailman.qth.net>; KX3 <k...@yahoogroups.com> Sent: Fri, Sep 1, 2017 7:28 am Subject: Re: [Elecraft] Thanks for all th

Re: [Elecraft] Thanks for all the portable operation photos so far

Wayne, These should be forwarded to Margaret and me for our promo use. Eric elecraft.com _..._ > On Aug 29, 2017, at 2:50 PM, Wayne Burdick wrote: > > I’ve received so many great photos already that I won’t be able to thank > everyone personally. But keep ‘em coming. >

[Elecraft] Thanks for all the portable operation photos so far

I’ve received so many great photos already that I won’t be able to thank everyone personally. But keep ‘em coming. Clearly some folks had a lot more fun than I did this summer. 73, Wayne N6KR > On Aug 29, 2017, at 9:22 AM, Wayne Burdick wrote: > > Hi all, > > We’re

Re: [Elecraft] Thanks to Elecraft support

Sent from my iPad > On Jan 11, 2017, at 6:17 PM, Carl Yaffey1 wrote: > > I posted a while back about not being able to drive my KPA500 to full power > on 6M. Trying to drive it beyond 200 watts resulted in a HI SWR fault. I > initially blamed it on the antenna, cables,

[Elecraft] Thanks to Elecraft support

I posted a while back about not being able to drive my KPA500 to full power on 6M. Trying to drive it beyond 200 watts resulted in a HI SWR fault. I initially blamed it on the antenna, cables, connectors, etc. etc. It worked fine on a dummy load. But changing antennas and cables and so on

[Elecraft] Thanks for the help.

I finally was able to get my upgraded K-3 to recognize my K-3 utility via USB. I deleted the utility from my computer and reloaded it, then left the K-3 with the power disconnected over night. This morning I connected the USB cable to the computer and then started it. I waited to make sure it

Re: [Elecraft] Thanks to all

On 9/10/2016 7:12 PM, Louis Ives wrote: I have also found that to connect to the K3 utility the K3 must be powered up. Yes, just like any other application using RS232/USB to communicate with the rig. The manual stated that it should connect to the utility regardless if it is powered up or

Re: [Elecraft] Thanks to all

What baud rate is K3 set to? Should be USB if using the USB to USB cable. I don't think the computer will connect to the radio if radio is not ON. You do not use a KUSB with the KIO3B upgrade. You should also get the new P3 "Y" cable to connect the P3 to the K3. Sent from my iPhone

Re: [Elecraft] Thanks to all

Louis, Do you have the menu RS-232 set to USB? It should be to use the USB connection - see page 63 of the K3S manual. HF-TRN and TRN refer only to the band encoding - see page 21 of the K3S manual. The computer may recognize the K3 USB to serial converter with power off the K3, but

[Elecraft] Thanks to all

I would like to thank everybody that responded to my questions about upgrading my K-3. All of the upgrades went without a problem, due in large part to the advise given. Everything works but I have a strange working K103B. The only way it will connect to the K3 utility page is to connect my

[Elecraft] Thanks for all the feedback regarding Winlink & K3.

Folks, I appreciate all the feedback that I have received. I am now able to link up to Winlink stations reliably with my K3 and my SCS DR-7400. 73, Tony L. (KJ5XF) __ Elecraft mailing list Home:

Re: [Elecraft] Thanks!

Tom; Lots of good suggestions to your original questions and I'll add a couple more. I built my K3 from a kit and it was an absolute joy to put together (much more than I expected). The instructions are all very clear and easy to follow. So, if you take the plunge into assembling your

[Elecraft] Thanks!

Thank you everyone!! I received many replies on what to purchase, what options, used, new, etc.. I have a lot to go through now, I'm very glad you all took the time to give me so many ideas! I wasn't expecting such a great response, hams are the best! -Tom

[Elecraft] Thanks to all

Just a note to thank everyone not only for their responses to my pathetic plea :) but also for all the information I have picked up just reading these threads. Fyi I did fire it up today & it only took me 15 minutes to realize the paddle plug does not go in the key socket :( I did some 'off

[Elecraft] Thanks to Elecraft and this Forum

-0500 From: Kenneth Talbott ktalb...@gamewood.net To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] Thanks to Elecraft this forum Message-ID: 005201d03d9b$4af57590$e0e060b0$@gamewood.net Content-Type: text/plain; charset=us-ascii Ditto! I don't know why I keep those imported rigs. Ken

Re: [Elecraft] Thanks to Elecraft and this Forum

[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dauer, Edward Sent: Sunday, February 01, 2015 8:50 AM To: elecraft@mailman.qth.net. Subject: [Elecraft] Thanks to Elecraft and this Forum Same here, and I had the same question: with a K3 and a KX3, why was I keeping the FT847 and the FT950 and all

Re: [Elecraft] Thanks to Elecraft this forum

To: elecraft@mailman.qth.net Subject: [Elecraft] Thanks to Elecraft this forum Just a few words of thanks to both Elecraft and the members of this forum. snip __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] Thanks to Elecraft this forum

Just a few words of thanks to both Elecraft and the members of this forum. Over the years I've had questions that for me, eluded answers and between the forum and the helpful people in tech at Elecraft, answers have been found. If I can't find the answers in my searches, I then like to ask

Re: [Elecraft] Thanks to Elecraft this forum

Ditto! I don't know why I keep those imported rigs. Ken - ke4rg -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith Sent: Saturday, January 31, 2015 3:57 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Thanks to Elecraft this forum

[Elecraft] Thanks all

I got my copper here: http://www.electrical-insulators-and-copper-ground-bars.com/ But I got a number of great recommendations, and almost instantly --- Shazam! Thanks to all. 73, Brian W3BW Brian F. Wruble, C.F.A. From my iPad

Re: [Elecraft] Thanks Tom

Hi Scott, Never took it as a criticism... If anything I have found this group of people to be kind, and generous to a fault in giving and sharing information. It is sort of like the old days of ham radio! Something I have not seen in many years. -- Thanks and 73's, For equipment, and

[Elecraft] Thanks Tom

Hi Tom, Thank you for the help here! The NR showing N/A was caused by my having the AGC off. I was unaware that killed the NR. The feedback problem is not that simple... I believe it is feeding back via the sound card... More as I narrow it down. Not a simple matter of having the audio up...

Re: [Elecraft] Thanks Tom

Why do you feel the need to have the monitor tuned on? 73, Scott, N9AA On 4/20/14 3:43 PM, David Cole wrote: Hi Tom, Thank you for the help here! The NR showing N/A was caused by my having the AGC off. I was unaware that killed the NR. The feedback problem is not that simple... I believe

Re: [Elecraft] Thanks Tom

David, If the sound is coming from the computer, go into the CONFIG menu and check the setting of LIN OUT. Default is NOR 010 (the 010 is the level). If you tap 1 it will set LIN OUT to =PHONES. That is a toggle, tap 1 again to turn it off. 73, Don W3FPR On 4/20/2014 3:43 PM, David Cole

Re: [Elecraft] Thanks Tom

Don, I will check, thank you sir!!! I have discovered that it is good to go slowly on all changes... :) -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see:

Re: [Elecraft] Thanks Tom

Hi Scott, I don't feel the need to have the monitor turned on. I do feel the need to understand what is happening is all... New radio to me, and complicated enough I no longer trust my ability to look and use with out looking at the books... :) -- Thanks and 73's, For equipment, and software

Re: [Elecraft] Thanks Tom

We've all been there, David. And my comment was not meant as a criticism, I was just curious. 73, Scott, N9AA On 4/20/14 5:41 PM, David Cole wrote: Hi Scott, I don't feel the need to have the monitor turned on. I do feel the need to understand what is happening is all... New radio to me,

[Elecraft] Thanks...Radio is spoken for

73 Bob w7wo __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this

[Elecraft] Thanks again to Elecraft

Those little axial inductors that look like resistors sure are fragile if you abuse them. Many thanks to the parts department for sending me a replacement part! harry KD0NFY -- Have old memories and young hopes. __ Elecraft mailing

Re: [Elecraft] Thanks again to Elecraft

Be thankful that Elecraft has not gone to the salt and pepper size.  I can handle 0805, but that is it, period.  Eyes and microscope don't help these old eyes beyond that level.  Thanks Elecraft. Mel, K6KBE On Monday, November 4, 2013 2:01 PM, Harry Stone harryst...@gmail.com wrote:

[Elecraft] Thanks for comments - KPA500 now powers on

Thank you all for your comments. I did not realize that I had to install the fuses in the KPA500 that came assembled given that the 115 V fuse holder was installed at the factory. Thank you all again. David, WD7I __ Elecraft mailing

[Elecraft] thanks Elecraft!

While I was in the area,I had time to stop at Elecraft HQ today. Lisa and Eric dropped what they were doing to talk to me, and Eric and gave me a great tour of their first-class facility. Thanks Eric and to all of your outstanding people. You guys rock! 73, David AJ4TF K2 7006 -- View this

[Elecraft] Thanks for all info

I would like to thank everyone for all the information about K3 repair and shipping time to Elecraft.73 Dave...NK8A __ Elecraft mailing list Home:

[Elecraft] Thanks!

I am writing this email to say a big thank-you to the staff at Elecraft for their courtesy and care for me, the customer. Thanks goes to the management, Keith Trinity (WE6R) technician that saw me through a problem that I had encountered! Without the generous help I encountered from these very

[Elecraft] Thanks- FTDI Driver information

Thanks to everyone who gave advice and information on FTDI drivers for Mountain Lion OS for Mac. I really appreciate it. Dick, N5XRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Thanks. Responses on : To K3 or not to K3?

Hi Folks, To all of you that provided me with an incredible wealth of meaningful information (on and mostly offlist) regarding my question of using the K3 as the main station transceiver, I thank you very much. Responses ranged of course from, Can't be beat to a page long tome of very

Re: [Elecraft] Thanks for your comments, Will a casual SSB operator enjoy the K3?

Good afternoon, My thanks to everyone. I received a tidal wave of positive comments on the K3, many from hams like myself. It seems the radio is so versatile that it can be used in a simple application or in a most complex manner. It truly could be the forever radio as it constantly

Re: [Elecraft] Thanks for your comments, Will a casual SSB operator enjoy the K3?

Tom, There are sellers of K3s on this message board from time to time. I am always curious as to why they are selling since I would never sell.I think some own two K3s and maybe selling the spare one. But, from what I have seen these sellers sell fast. I don't ever remember the

Re: [Elecraft] Thanks for your comments, Will a casual SSB operator enjoy the K3?

Tom, Don't give up looking for a used rig. It took me a while but I found one with at least 80% of the features I wanted and I am a DXer of 65 years experience so the wants were extensive! For basic operating, you should be able to find one used. However, getting one from Elecraft directly

[Elecraft] Thanks

Just a line to thank all of those of you that gave me guidance re the filter set-up for my K3-100. Amazing amount of replies, nice to feel a part of something worthwhile!! '73 Brian. 2E0BWQ Sent from my iPad __ Elecraft mailing list

[Elecraft] Thanks for all the help!!!

I wanted to thank everyone who responded with help for connecting a Kenwood MC-60 with a boom to my K3. Once again many thanks!!! Mark Griffin, KB3Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] Thanks Elecraft

? Rich, n0ce - Original Message - From: w0...@aol.com To: elecraft@mailman.qth.net Sent: Thursday, March 07, 2013 5:31 PM Subject: [Elecraft] Thanks Elecraft Received today the replacement BNC/BNC cable for the P3 just four days after my e-mail request. The phantom spike

Re: [Elecraft] Thanks Elecraft

for awhile. I'd like to get the replacement cable for a permanent fix. Who do I contact? Rich, n0ce - Original Message - From: w0...@aol.com To: elecraft@mailman.qth.net Sent: Thursday, March 07, 2013 5:31 PM Subject: [Elecraft] Thanks Elecraft Received today the replacement

Re: [Elecraft] Thanks Elecraft

Fjeld Cc: w0...@aol.com ; elecraft@mailman.qth.net Subject: Re: [Elecraft] Thanks Elecraft Try supp...@elecraft.com. 73, matt W6NIA On Sat, 09 Mar 2013 16:50:15 -0600, you wrote: I just purchased and installed the SVGA board and now I have spikes on the high side of where I am tuned to at times. I

[Elecraft] Thanks Elecraft

Received today the replacement BNC/BNC cable for the P3 just four days after my e-mail request. The phantom spike is gone. You gals and guys are the very best, thank you! 73 de Bill __ Elecraft mailing list Home:

Re: [Elecraft] Thanks Elecraft

] On Behalf Of w0...@aol.com Sent: Thursday, March 07, 2013 3:31 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Thanks Elecraft Received today the replacement BNC/BNC cable for the P3 just four days after my e-mail request. The phantom spike is gone. You gals and guys are the very best, thank

[Elecraft] Thanks

Thank You all at Elecraft who work all year to further our hobby. You are a pleasure to deal with. May you all have a very Happy Prosperous New Year! ! ! ! 73 George AI4VZ __ Elecraft mailing list Home:

[Elecraft] Thanks to all

Thanks to all who replied to my queries about messages not appearing. This one should be in plain text and should appear. Thanks also to those who replied off list and answered my original query. John, VE1JS __ Elecraft mailing list

Re: [Elecraft] Thanks to all

* On 2012 13 Dec 17:30 -0600, John Scott wrote: Thanks to all who replied to my queries about messages not appearing. This one should be in plain text and should appear. Thanks also to those who replied off list and answered my original query. Looks good here! 73, de Nate, N0NB -- The

Re: [Elecraft] thanks for help w/ P3 and LP-PAN

- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Robert G. Strickland Sent: Saturday, July 07, 2012 9:10 PM To: elecraft@mailman.qth.net Subject: [Elecraft] thanks for help w/ P3 and LP-PAN I just discovered an email filter that was trashing responses

[Elecraft] thanks for help w/ P3 and LP-PAN

I just discovered an email filter that was trashing responses to my request for opinions about the P3 and LP-PAN. Thanks to all who replied. Very helpful. ...robert On 7/2/2012 19:01, Robert G. Strickland wrote: In another post I ask about sub-receiver versus panadapter. Here, a question

[Elecraft] Thanks to W3PFR, KK5F

Re: K-1 Frequency jump. Thanks to advice from Don (W3PFR) and Mike (KK5F) I was able to find the problem as a bad connection on the tuning pot. 72, Tim K3HX PS HPE C U in ARCI Summer Homebrew Sprint 07 Jul. www.arci.org

Re: [Elecraft] Thanks to W3PFR, KK5F

Tim wrote: ...I was able to find the problem as a bad connection on the tuning pot. Good going. It doesn't explain the original problem of no transmit or receive, however, so that must have been an entirely separate issue that may come back. 73, Mike / KK5F

[Elecraft] Thanks ELECRAFT

I am really pleased with the performance of my Elecraft gear and the  great support that they provide. It  is also impressive that they think of all the little things too. For example: -From comments that were made here on this list, I knew that I would have to make up a new power cord for my P3

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

Although smaller than most of the other dxpeditions, our trip to Tiree (Inner Hebrides, MS0WRC) last October used 4 K3's (all owned by team members) and one FT2K. We made 12500 Q's in the week on SSB and CW and continually got unsolicited complimentary audio reports from them. There was one

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

snip The K3 is a fabulous dxpedition radio, we only had one KPA500 and that was on the CW station. That is one very boring amplifier, it just sat in the corner and worked its socks off ;) end snip But, Ian, isn't this one of those rare cases when boring is good? No breakdowns, no spurrious

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

Absolutely, my point exactly! :) 73 Ian -- Ian J Maude, G0VGS SysOp GB7MBC HB9DRV-9 DX Clusters If you feel you would like to donate to help the running of the cluster, please visit http://www.gb7mbc.net. My thanks in advance :) On 9 February 2012 19:20, Ian Kahn km4ik@gmail.com wrote:

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

When it comes to amplifiers, boring is definitely good. A long time ago I was operating a DX contest at a multi-op. One of the amplifier power supplies was in a heavy steel cabinet on casters underneath the operating table about 4 feet away. It was about 3 am and very quiet in the shack (CW

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

According to latest info on the DXpedition's Clublog page,from N2OO: All logs have been uploaded except for one small log which must wait until the team returns to the mainland. I do not know what band/mode or specific timeframe log is on that laptop but it was from February. The log is not

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

: Tuesday, February 07, 2012 12:36 PM Subject: Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition On Tue, Feb 7, 2012 at 12:30 PM, Joe Subich, W4TV li...@subich.com wrote: VP6T and TN2T set the standard when it comes to handling logs and confirmations.  Unlike HK0NA who appear to have lost

[Elecraft] Thanks! RE: Has my KPA500 failed?

It was the TX1 setting.  I know that I have never touched that since day one. But it is working now. Thanks to all who replied. Zack - Original Message - 4...@comcast.net, flexra...@flex-radio.biz Sent: Tuesday, February 7, 2012 8:34:44 PM Subject: re: Has my KPA500 failed?

[Elecraft] Thanks Elecraft -- HK0NA DXpedition

Surprised the lack of comments on this subject, unless I missed it. I do want to thank the Elecraft gang for their support of the HK0NA operation. I have been a ham for 57yrs and had NEVER chased a single HF DXpedition, but I got the bug with this one. What an amazing performance by the

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

Thanks for noticing, Bill :) The HK0NA crew certainly did a great job, as have other recent DXpeditions using K3s, etc. DXpedition use of our gear has been a source of input and inspiration for us, and we provide a lot of support to the teams. Many hardware and firmware refinements now in

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

Wayne I was especially impressed by the prompt response of Elecraft yesterday to the ham who is in Togo with damaged gear. Actions like that speak louder than words. Congratulations. Marcelo, PY1KN Thanks for noticing, Bill :) The HK0NA crew certainly did a great job, as have other recent

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

On Tue, Feb 7, 2012 at 10:45 AM, Wayne Burdick n...@elecraft.com wrote: ...The HK0NA crew certainly did a great job, as have other recent DXpeditions using K3s... = That would include recent expeditions VP6T and TN2T, and no doubt others as well. A great field test for the gear, and a

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

On 2/7/2012 8:45 AM, Wayne Burdick wrote: Thanks for noticing, Bill:) The HK0NA crew certainly did a great job, as have other recent DXpeditions using K3s, etc. Yes, and more DXPeditions would be using K3s if the JA companies didn't have deeper pockets than Elecraft. Think about the cost of

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

That would include recent expeditions VP6T and TN2T, and no doubt others as well. VP6T and TN2T set the standard when it comes to handling logs and confirmations. Unlike HK0NA who appear to have lost significant sections of their logs, VP6T had *confirmations* on Logbook of the World daily

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

: Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition On Tue, Feb 7, 2012 at 10:45 AM, Wayne Burdick n...@elecraft.com wrote: ...The HK0NA crew certainly did a great job, as have other recent DXpeditions using K3s... = That would include recent expeditions VP6T and TN2T, and no doubt

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

On Tue, Feb 7, 2012 at 12:30 PM, Joe Subich, W4TV li...@subich.com wrote: VP6T and TN2T set the standard when it comes to handling logs and confirmations.  Unlike HK0NA who appear to have lost significant sections of their logs... === Ah yes, sad but true, Joe. I forgot about that

Re: [Elecraft] Thanks Elecraft -- HK0NA DXpedition

It is a bummer that with my work and travel schedule they lost one of my five contacts with them but oh well life goes on. Maybe I will get lucky and they will recover them. Funny about TN2T because about two hours after I paid for the QSL card handling I received the LOTW confirms. Now I will

[Elecraft] Thanks

Thanks to all who commented I just got my K3 and had gotten use to the Icom and did not see it in the manual wanted to make sure I had not missed it Don W4DEE __ Elecraft mailing list Home:

[Elecraft] Thanks! RE: KPA500 was working now it's not

Thanks to all who replied. It was the PTT cable that had somehow come loose. Still can't figure out how though. This is a very nice accessory for my Flex-5000! Zack N8FNR __ Elecraft mailing list Home:

[Elecraft] Thanks ...

I was cleaning up the shop and noticed a small pile of little paper slips I'd saved ... they all say: This subassembly packed by ... You might have a few of these yourself, if you're reading this message. So, at this time of year, I'd like to say thanks to: Alan, Rachel, Dina, Marina, Pennie,

Re: [Elecraft] Thanks ...

Thanks for bringing that up Steve, they all, including the support people, have done an exceptional job considering the hundreds of components involved in these complex kits. Ron VE8RT On Fri, 2011-11-25 at 17:47 -0500, Steve Jackson wrote: I was cleaning up the shop and noticed a small

Re: [Elecraft] Thanks ...

: [Elecraft] Thanks ... Thanks for bringing that up Steve, they all, including the support people, have done an exceptional job considering the hundreds of components involved in these complex kits. Ron VE8RT On Fri, 2011-11-25 at 17:47 -0500, Steve Jackson wrote: I was cleaning up the shop

[Elecraft] thanks guy

got it now -- QRP = MAX Enjoyment http://www.kc5wa.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] Thanks to all who replied - KPA500 - 500W out on 120VAC?

Thanks to all who replied on my question about using a KPA500 on 120. The input is appreciated. Zack N8FNR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] Thanks for all the replies on the width!

Philip LaMarche LaMarche Enterprises, Inc mailto:p...@lamarcheenterprises.com p...@lamarcheenterprises.com http://www.lamarcheenterprises.com/ www.LaMarcheEnterprises.com 727-944-3226 727-937-8834 Fax 727-510-5038 Cell http://www.w9dvm.com/ www.w9dvm.com K3 # 1605

[Elecraft] Thanks guys

thought so but had to ask Ben __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

[Elecraft] Thanks

Must be local problem here then.. 73 Dick __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] Thanks everyone!

Philip LaMarche LaMarche Enterprises, Inc mailto:p...@lamarcheenterprises.com p...@lamarcheenterprises.com http://www.lamarcheenterprises.com/ www.LaMarcheEnterprises.com 727-944-3226 727-937-8834 Fax 727-510-5038 Cell http://www.w9dvm.com/ www.w9dvm.com K3 # 1605

[Elecraft] Thanks for the frequency locking on 2m (internal)

Locking module installed, frequency stability much-much better!!! (2M internal transverter) Now very suitable for modes such as WJST Thanks ELECRAFT Interestingly enough, the radio seems to have a frequency error over the range of bands? (measured on GPS locked F-counter) Not enough to be of

[Elecraft] thanks

want to thank all the folks that e mailed me . abt. my atu problem havent got it to working yet but am looking in the rite place now hi hi .unpluged it for now rig working great did plug it back in once .rig says its not there now . owell at least im back on the air now . and that  is my cup

[Elecraft] Thanks, another question, and a little background.

First, thanks to Wayne, Don, Bruce, and Jeff, for your helpful notes and answers to yesterdays inquiries. *I was afraid those answers would actually be pretty much set in software and or stone, but I can dream can't I? At any rate, thanks for a great product and group. *Question, is there room

[Elecraft] Thanks to those that helped

Thanks to everyone that answered my OT question about getting capacitor goop off of PC boards. I managed to remove about 8 leaking SMD aluminum can capacitors without destroying it, cleaned it with alcohol flux remover, then distilled water, and replaced the caps. Success! My old TS850S

[Elecraft] Thanks to the list!

I found a decoder that I asked for this morning... Phil Philip LaMarche LaMarche Enterprises, Inc mailto:p...@lamarcheenterprises.com p...@lamarcheenterprises.com http://www.LaMarcheEnterprises.com www.LaMarcheEnterprises.com 727-944-3226 727-937-8834 Fax 727-510-5038 Cell

[Elecraft] Thanks to Jim

On Mon, Dec 13, 2010 at 10:23 AM, Jim Brown j...@audiosystemsgroup.comwrote: For a tutorial on the Pin One Problem, and how to deal with RFI, see http://audiosystemsgroup.com/publish.htm and http://audiosystemsgroup.com/RFI-Ham.pdf The info in here is excellent and helped me track down a

[Elecraft] Thanks to Al - N1AL and Elecraft

I just wanted to say THANKS to Al N1AL for his work on the P3 and the latest enhancements with ver .41 firmware.   Being able to calibrate the display level indication makes it feel almost like an Agilent Spectrum Analyzer.  (Yes I remember when you worked at H.P.  Al.)   Thanks again and Happy

[Elecraft] Thanks to all!!

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

[Elecraft] Thanks to all re: stiffner and usb cable

Ordered a pair of synth stiffeners and a updated USB cable from Madelline at Elecraft a few minutes ago. Thanks to all jim ab3cv __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

  1   2   >