I have built 100+ K2's to date, and all of the other Elecraft kits. Let me
build your radio. My rates are reasonable and you get a built radio ready to
play.
73
Alan
W1HYV
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Hello,
Today if the thunderstorms hold off until the evening I plan on operating
the QRP AField sprint for a few hours on the Appalachian Trail. I was
planning to go out over night but a knee injury has curtailed that trip. So
I will be out on the AT in PA after 16:00 UTC.
Will start out on
Date: Fri, 16 Sep 2005 08:51:33 -0700
From: Don [EMAIL PROTECTED]
Subject: Re: [Elecraft] Algorithm for Tuner
To: Bill Coleman [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; format=flowed; charset=iso-8859-1;
reply-type=response
Bill,
It's
Hello all,
I will participate in the ARRL's Emergency Power Operating Event today.
Look for me mobile from PA around 1500utc. I will send out a special
EPOE QSL Card. Please send a SASE and a #10 envelope to WA3WSJ CBA. As
always all contacts count towards a Nomad Award. Check it out at
Charles,
I have tried that method ... ditto setting L and searching for best C. It
works but is no better than the one I am using now which is to begin with
both L and C at 0 and then search for the best C for every L as L increases
from 0 to max. The searching is done in large steps
Well, my KAT2 saga continues.
I did indeed find some unsoldered pins on one of the relays, and
corrected this.
Now, however, I seem to have the opposite problem. When trying to
perform the CALn procedure, instead of having too much reflected power,
I now have no power (forward or
Nick Waterman wrote:
I was going to ask, even before this thread... What do Elecraft and
Doctor Solder recommend now that 60/40 doesn't officially exist?
Anyone?
Apart from being told loads of us are stockpiling lead-based stuff
while we still can, I've not really had any useful advice on
Until today, I've been using an Icom AT-180 antenna tuner with my
IC-706MKIIG. Well, today, it gave up the ghost. Looking back, it never
really did work right.
I want to replace it with another auto antenna tuner (in the shack). Any
suggestions? Any that will interface with the 706?
Thanks
The first thing that occurs to me is that the single turn of wire through
the center of T1 may be missing. The second thing is that T1 itself may not
be properly wound or properly soldered. Check that the proper color wire is
inserted into the proper holes (the color of the wire in hole 2 should
You go buy lead free solder, preferably silver loaded, and start using it.
No changes needed to your normal soldering methods.
On Saturday 17 Sep 2005 19:04, Nick Waterman wrote:
Nick Waterman wrote:
I was going to ask, even before this thread... What do Elecraft and
Doctor Solder recommend
R6 is currently uninstalled ... I am still trying to do the CALn null
adjustment ... as I said, instead of having HI showing up continuously,
I know have only '000' on the display. (I don't know if this is
significant, but the manual says the display should look something like
'075 ATU' but I
11 matches
Mail list logo
