Hmm
I have a 66' (20m-ish) center fed dipole at 6 feet off the ground in my back
yard. The ATU in my KX1 reads P 0.3 and r9.9 at 7090 khz. This doesn't
look right to me. Did I dork something up when I twiddled the knob?
--
View this message in context:
The more I get to know my K2 the more I like it. A friend has a K2 that
I built and his A/B comparison with an ICOM 706 resulted in the K2
hearing stations on 40 m that the 706 could not.
This probably explains why, although I can hear some stations on my K2,
I can't work 'em! Come the
I am pleased to report the problem is solved
Many thanks to Greg AB7R (do you guys ever sleep??)
Here is his reply:
Pete,
What mode do you have the K3 in. PSK-D? If so please change it. PSK-D is
not ready just yet (see the errata sheet). PSK work great right now in
Data-A mode with MixW.
On Sun, 2007-12-30 at 18:14 -0800, Rick Tavan N6XI wrote:
Isn't it great that the K3 supports external keyers through the KEY jack so
we can all have it our own ways? Such foresight! Such imagination!
An external keyer cannot be used to send RTTY or PSK31 using the
paddles. For that you need to
Up and running, made first contact with K8ORD/7 this morning :-) No problems
, all working well so far. Fit and finish amazing.
Now to get some sleep !
Walt K8CV Royal Oak, MI.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
Hello,
I have a few things I need to do before I head out to the Appalachian Trail
for the last time in 2007.
I will try to be on the air around 7.033 @ 16:00 UTC.
I will then go on 14.061 @ 17:00 UTC for an hour.
I will pack up and hike out at 18:00 UTC. If the QSO's are still coming in I
Very interesting thread indeed.
My activities on 50MHz primarily take place on dxpeditions, limited to
just six meters. I have often wondered about setting up a second antenna,
spaced several wavelengths away from the primary ant, to try diversity
reception on terrestrial E and F2 propagation.
Check the pitch setting for RTTY. Mine had default of 915 (or some
similar frequency) for the mark. Adjust it using the same method as
CW pitch.
Raj, N2RD
On Dec 30, 2007, at 11:30 PM, Peter ZL1PWD wrote:
Hi all and Happy New Year
Can someone please show me where I am going wrong
May I wish all list members and Elecraft users a Very Happy New Year and all
the best for 2008.
Regards,
Brian GM4XQJ
K1#00981 )
K2#00374 ) all qrp
K2#05375 )
All outgoing mail is checked using avast! Antivirus software.
http://www.avast.com
___
Folks,
After a 2+ year hiatus from RadioActivity, I finished up a K2 build,
and tried getting on the air a bit--UGH dismal results! During the
recent ARCI Homebrew Sprint I made 3 contacts, 1 in WA and 2 in ID,
I'm in OR. Me and a friend back in CO have tried two or three times
for a scheduled
Alan Bloom wrote:
As I recall, signals at VHF/UHF tend to become horizontally polarized
after propagating long distances, no matter what the polarization of
the transmit antenna. That's why horizontal polarization is
traditionally used for SSB/CW (DX-oriented communications) and
vertical for FM
Such a low dipole will normally have, at its center, an impedance in the
general range of 4-j60 ohms at 7 MHz, so the r value you're seeing doesn't
seem surprising.
For all practical purposes it's on the ground and the earth has a very
large effect on its impedance and its resonant frequency. In
Rod,
With the current situation - in the sunspot cycle low point, that may be
as good as it gets.
Your PW-1 antenna may perform OK on 30 meters and above, but on the
lower bands it simply does not have adequate capture area to be
effective (the same is true of most any small antenna).
The
On my simple wire doublet antenna (100' long, 30' at the apex) I was
hearing South America this morning and worked 3000 miles later in the
morning on PSK31 running 25 Watts to the doublet, so while conditions
aren't great they are far from flat. Ten Watts and a K2 are fine, the
only thing left
In a message dated 12/31/2007 8:49:19 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Folks,
After a 2+ year hiatus from RadioActivity, I finished up a K2 build,
and tried getting on the air a bit--UGH dismal results! During the
recent ARCI Homebrew Sprint I made 3 contacts, 1 in WA
In a message dated 12/30/2007 3:42:03 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Gentlemen:
I noticed that several of the other highly computerized radios on the market
have a substantial time delay after power on before the radio is fully
operational (IC756Pro, IC7800, etc.).
In a message dated 12/31/2007 9:46:26 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
In a message dated 12/30/2007 3:42:03 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Gentlemen:
I noticed that several of the other highly computerized radios on the
market
have a
On Mon, 31 Dec 2007 17:27:29 +, you wrote:
On my simple wire doublet antenna (100' long, 30' at the apex) I was
hearing South America this morning and worked 3000 miles later in the
morning on PSK31 running 25 Watts to the doublet, so while conditions
aren't great they are far from flat.
So, if I understand you right... Sorry about getting OT here.
I can make it resonant by extending it about 1 foot on each end?
33 feet/x=7.09/7.3
x=~34
My main problem are junipers. I can raise the antenna about 20' in the air
but then the antenna is literally in the trees. Would that
Tom Childers, N5GE, wrote:
IMHO, Just as important as a good antenna is not relying on DX clusters to
find
contacts for you. Tune the bands (slowly) and look for those weak signal
stations. They are there, and you can't always depend on the other guys to
find
them for you. Nobody else in
The K3 audio effects options includes Binarual Stereo, this is in fact
I/Q Stereo.
If you select this then feed the headphone audio to SDR software that
can handle I/Q you can use the the K3 as a narrow-band Front end for
software such as powerSDR
The amount of bandwidth you can cover this way
Last night I was able to work Colorado from my location not too far West of
you. Twenty meters should work into CO from about 2000z until 2330z.
Yes, the bands are a little challenging these days but one can work across the
US and into other countries by trying different times and bands.
Rod,
You have pretty much eliminated any physical remedies, so how about an
operational solution:
The SKCC 2nd Anniversary Special Event takes place the entire month of
January. Last year we made some 5,000 QSOs, i believe. Plus there is
an online event calendar and also a live scheduling page
This -is- interesting. Now if we could get Wayne and Lyle to provide a 11 KHz
quadrature ( I/Q ) signal.. Now that would be the ticket. No Softrock required.
David, W4SMT
Brendan Minish [EMAIL PROTECTED] wrote: The K3 audio effects options includes
Binarual Stereo, this is in fact
I/Q Stereo.
A few weeks ago when several of us were making spectral
measurments on the K3 we had keydown, 120 watts out,
for up to 20 minutes with no loss of power and no adverse
effects.
Doug
W6JD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
cptpatmcd wrote:
My main problem are junipers. I can raise the antenna about 20' in the air
but then the antenna is literally in the trees. Would that create more
problems that it solve?
Not unless you mean mechanical problems. It will be MUCH more efficient
at 20'. Trees have very little
The bands have been very active here on the right coast. Worked a
mobile station in Spain and had a fella from Colorado booming in here
today, both on 17m. Most days 17m is active. There is often activity
on 20m. Between the RAC contest and the Stew Perry contest, this past
weekend, I worked
Agreed. Though I tend to do both. I will spin around the bands while
watching the cluster. My program gives me an indication of the folks
that use LOTW also. That is a plus. I am trying to get WAS and DXCC
all through LOTW.
I find cluster's real handy as I am still working on improving my
I hesitate to put this question on the reflector but support at Elecraft is
closed until Wednesday, Jan. 2 - understandable, they DO deserve some time off!
The assembly of K3-100 (#178) is complete and went very smoothly...all tests
checked out flawlessly, the filters are properly aligned per
Rod:
There several things you left unsaid in your message, most
critically, the band and time of day on which you have tried and
failed to hear signals.
BTW, tuning across the band and hearing 5 or 6 signals is not too bad
these days. Surely, you should be able to work one of those. By the
After a 2+ year hiatus from RadioActivity, I finished up a K2 build,
and tried getting on the air a bit--UGH dismal results!
I got to work a bit early this morning, checked my email and then looked at
DX Summit to see how the bands were. This is a good substitute when no
nearby radio allows me
Hello,
I would like to thank everyone that made my trip on the Appalachian trail a
successful one today.
To check out my story please go to
www.n3epa.org
Click on The Appalachian Trail link
Click on Trail Trip Photos
Click on PA and then the Year 2007 trips.
I now have 880
Bill and everyone.
After receiving a reply to my e-mail to DZ kits I came up with the following
thought:
Who knows when the DZ kit will ship? (really ship)
I didn't see a forum for DZ kits. Is there one?
The owner, Brian, seem to be very set in how the DZ kit is designed especally
no DSB
Hi Cary,
I hesitate to put this question on the reflector
This what the reflector is for!
apparently my signal is about 500 hertz higher
You ought to double check which filters you have set up for TX for each
mode. It sounds to me as if you might have a small fubar in your filter
Cary,
500 Hz high? Now that sounds like you did the zero beat correctly, but
at one of the WWV tones rather than the carrier. I suggest you try
again. If you want to try an alternate to audible zero-beat, see below
- there will be no confusion about whether you are zero beating a WWV
tone
Well, I joined the waiting group of future K3 owners on December 26 and
only wish I had ordered earlier.
I am interested in learning more about the K3s TX EQ. I have been using The
W2IHY 8 Band EQ and EQplus with an FT-1000MP and have been very pleased with
both products. In fact I
I didn't see this when I searched the reflector and archives, so I may just
be the first not to get this...
I'm about to install C8 on the bottom of the RF board. The instruction
reads Before soldering, fold it down against the board, towards the back.
First, my 82 pF is labeled '820.' Assume
I have 250Hz, 400Hz and 2.8KHz roofing filters installed. After update
to the latest firm ware I am noticing that the radio goes really deaf
when the 250Hz or the 400Hz filters are used. I have set the
appropriate gain of 4db and 2db, respectively for the 250Hz and 400Hz
filters. The FLX
Dave W7AQK reported in his Dec. 29th post, 'K3 Performance', that he was having
trouble receiving anything between 500-700khz on his K3. A later post from
Dave informed us he did have the KBPF3 general coverage filter module installed.
This concerns me. There is an AM station on 630khz about
Added note: the change in the DDS frequency occurs by just changing the
filter width or selecting the narrower filters.
Raj
Rajiv Dewan, N2RD wrote:
I have 250Hz, 400Hz and 2.8KHz roofing filters installed. After
update to the latest firm ware I am noticing that the radio goes
really deaf
I can't hear anything from 500-700 khz but I am not sure there is anything
there for me to hear right now. In fact, I can't hear much below 1 Khz.
Seems like I should hear something now in the evening.
One thing I do notice is that if I switch the radio to Data mode, I am able
to widen
I notice that in DATA A mode I am able to widen the filters to 6 khz even
though I do not have the 6 khz roofer installed. And yes, it does sound wider
as well as indicate a 6 khz width. Makes AM sound a whole lot better. Is
this a bonus undocumented feature or my imagination?
k4ia
Buck
On Mon, 31 Dec 2007 [EMAIL PROTECTED] wrote:
I notice that in DATA A mode I am able to widen the filters to 6 khz even
though I do not have the 6 khz roofer installed. And yes, it does sound wider
as well as indicate a 6 khz width. Makes AM sound a whole lot better. Is
this a bonus
Would some of you current K3 owners please check and see if you can hear
anything between 500-700 khz. Also, do you have the KBPF3 installed and use
the AM filter?
Works fine here and I can easily listen to AM BC stations in this range.
Have a Gr8 '08!
Lyle KK7P
This may be an overly simple response and I appoligize. Whoever is having
this RX problem from 500-700 kHz AND has the KBPF3 installed, is the KBPF3
set to ON in the CONFIG menu? It needs to be ON and then cycle the power.
73
Greg
AB7R
-Original Message-
From: [EMAIL PROTECTED]
Paul,
The TX EQ is kind of an audio shaper. Lyle can describe it better than I.
But I find I can taylor the audio characteristics as desired. Cutting the
audio bands is always better than boosting. We also have a feature on our
list to have a seperate TX EQ for each mic input (FP and RP).
You
Larry and All,
Well, I think you can relax. My K3 is now receiving at 580, and seems to be
doing so properly. It was interesting though. Several times I had verified
that all the settings were right, and that the KBPF3 was engaged. Those
settings were fine, and I wasn't hearing anything
Jay,
You have the correct part. The 82 in my kit was also marked 820.
That's fine.
I was able to fold mine down towards the back (with the markings
face up!) with short leads. Those holes just above C8, where the
cap will be folded over, are probably just feed-through holes and
no components
Ordered mine yesterday! Been reading the manual a few times in
anticipation and I have a
couple basic questions.
Is the spot volume adjustable independently of the sidetone volume? I
do not see any reference
to this in the manual.
I know that the sub receiver hasn't been released yet. I
Mike Scott wrote:
I am building a 3-element 6-meter quad while waiting for my 2nd batch K3.
Before final build a new thought...
Instead of building a quad I could alternatively make the spreader arms a
little longer and configure two cross-polarized 3-element yagis. The thought
would be
Great suggestion Greg.
I did not have an appropriate cable to hook into J1 on KEF3. So I
unhooked it from KSYN3 and used the cable to J2 and some clips I had. I
have an HP5343A counter slaved to an HP3801Z GPA stabilized 10MHz
reference. Using this setup, I measured the frequency of the
Raj,
You have to read the manual when doing thisPlease note this BOLD FACED
caution on page 47.
Before attempting reference calibration,
allow the transceiver to warm up at room
temperature for about 15 minutes (cover on).
Greg
-Original Message-
From: Rajiv Dewan, N2RD
Yep, just did it tonight on K3 serial number 175 - works great!
Listened to WSM (650 KHz, showing S9 + 40 but I'm close) and some
others.
Mostly you hear AM broadcast radio stations, of course. I also tuned
around the 2-3 MHz areas and found the nearby shortwave station
(WWRB) and the 6
160 meters has been good for contacts from Oregon to Hawaii or the Atlantic
coast recently. I'm using a 100-foot Inverted L working against ground.
Ron AC7AC
-Original Message-
Last night I was able to work Colorado from my location not too far West of
you. Twenty meters should work
I had a small mishap with my wire cutters while trimming the L33 (BFO
pre-wound torrid) and R116 (5.1Mohm 1/8 W) resistor's leads. As I went
to trim the fine wire lead of the L33 I accidentally also cut a large
chunk out of one of R116's leads.
I'm wondering if I should try to patch R116's lead
I know this is 3 hours early for those on the left coast, but we
greeted 2008 a few minutes ago here in North Carolina.
Best wishes for a Happy and prosperous New Year to us all.
73,
Don W3FPR
___
Elecraft mailing list
Post to:
Don Wilhelm wrote:
I know this is 3 hours early for those on the left coast, but we
greeted 2008 a few minutes ago here in North Carolina.
Best wishes for a Happy and prosperous New Year to us all.
73,
Don W3FPR
___
Elecraft mailing list
Post to:
Michael,
If it was me, and I had a very high resistance part in my
junk box, I'd give it a try. I'm pretty sure that resistor is
there only to provide a mechanical support to this coil
under the board. So, any very, very high resistance part
can do the trick -- if it fits mechanically.
If the
Greg,
You are right about the bold faced caution on Page 47 and indeed I
waited long before doing the REF CAL, which I did using Method 2 with
the cover closed. However, I am still surprised by the frequency
excursion measured on start up. I did wait a lot longer and calibrated
it using
Happy New Year to all from the chilly west slope of the Rocky Mountains
in Colorado.
73, Doug -- K0DXV
Dave Wilburn wrote:
Don Wilhelm wrote:
I know this is 3 hours early for those on the left coast, but we
greeted 2008 a few minutes ago here in North Carolina.
Best wishes for a Happy and
michael taylor wrote:
I had a small mishap with my wire cutters while trimming the L33 (BFO
pre-wound torrid) and R116 (5.1Mohm 1/8 W) resistor's leads. As I went
to trim the fine wire lead of the L33 I accidentally also cut a large
chunk out of one of R116's leads.
I'm wondering if I should
Hi Don,
I was busy writing firmware when you wrote this note :) Snowy, windy, and
chilly but this is the kind of weather to which I am accustomed for this day of
celebration!
May 2008 be our best of years.
73 and Happy New Year! (well, in two hours :)
KJR
-Original
On Jan 1, 2008 1:04 AM, Vic K2VCO [EMAIL PROTECTED] wrote:
Keep in mind that the ONLY function of R116 is to support L33. So as
long as L33 is connected to the circuit board pads, you will be fine. So
by all means patch R116's lead; it's just there for mechanical reasons.
Ah ha! I was throw
63 matches
Mail list logo