Re: [Elecraft] Well Hell.... I just bricked my K3s
On Sat, 2016-07-02 at 19:33 -0700, Ken Arck wrote: > Oh yes...holding POWER for more than 10 seconds does nothing > either. > What should holding power for more than 30 seconds do? 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Well Hell.... I just bricked my K3s
* On 2016 02 Jul 21:34 -0500, Ken Arck wrote: > Oh yes...holding POWER for more than 10 seconds does nothing either. > > I have a feeling it's going back to Elecraft next week... How about pulling the PA out and setting the radio back to the way it was prior to installation (it's been nearly six years since building my K3 and I forgot the strapping, if any). 73, Nate -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Ham radio, Linux, bikes, and more: http://www.n0nb.us __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Well Hell.... I just bricked my K3s
Oh yes...holding POWER for more than 10 seconds does nothing either. I have a feeling it's going back to Elecraft next week... -Original Message- From: Ken Arck Sent: Saturday, July 02, 2016 8:13 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Well Hell I just bricked my K3s Just finished installing the 100 watt PA and all was going fine until the 14 mHz 50 watt calibration (using the K3 Utility program). The radio went dead and nothing I've tried brings it back to life...GRR I removed power completely, let it sit for 10 minutes, reconnected and all that happens is a small thump out of the speaker when I tap the power button. I even tried the initialization procedure in the manual (hold the SHIFT/LO button while tapping the power and nothing but the thump. No USB comm either, no matter what (not surprised about that) Ahhh well, figures on a Holiday weekend Ken (time to hook the TS2000 back up for the 2 mtr EME pass tomorrow) -- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to lmar...@mt.net -- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Well Hell.... I just bricked my K3s
Ouch! Sorry to hear that. You are in the right place to get help 73 Leroy AB7CE -Original Message- From: Ken Arck Sent: Saturday, July 02, 2016 8:13 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Well Hell I just bricked my K3s Just finished installing the 100 watt PA and all was going fine until the 14 mHz 50 watt calibration (using the K3 Utility program). The radio went dead and nothing I've tried brings it back to life...GRR I removed power completely, let it sit for 10 minutes, reconnected and all that happens is a small thump out of the speaker when I tap the power button. I even tried the initialization procedure in the manual (hold the SHIFT/LO button while tapping the power and nothing but the thump. No USB comm either, no matter what (not surprised about that) Ahhh well, figures on a Holiday weekend Ken (time to hook the TS2000 back up for the 2 mtr EME pass tomorrow) -- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to lmar...@mt.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Well Hell.... I just bricked my K3s
Just finished installing the 100 watt PA and all was going fine until the 14 mHz 50 watt calibration (using the K3 Utility program). The radio went dead and nothing I've tried brings it back to life...GRR I removed power completely, let it sit for 10 minutes, reconnected and all that happens is a small thump out of the speaker when I tap the power button. I even tried the initialization procedure in the manual (hold the SHIFT/LO button while tapping the power and nothing but the thump. No USB comm either, no matter what (not surprised about that) Ahhh well, figures on a Holiday weekend Ken (time to hook the TS2000 back up for the 2 mtr EME pass tomorrow) -- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Bought a second hand P3 with 2 KW TX sensor question
The 2kW monitor works pretty well at 100 watts. The 200W sensor might have a little better accuracy at 100W and works much better for QRP. If by "images" you mean seeing the same signal on either side of center of the pandapter display, that doesn't happen with the P3. Unlike SDR receivers and panadapters that use an analog I/Q downconverter, the digital downconverter in the P3 is "perfect" in that respect. Alan N1AL On 07/01/2016 11:59 PM, will...@zendamateur.nl wrote: Hi group, I have a K3 100 Watt and i bought a P32 with VGA and TXmon, the TX Monitor is 2 Kw. I was thinking because of the fact that I am only working with 100 watt would it be worth reducing the sensor to 200 Watt ?? 1 I don't know if it is possible. 2 I don't know if I see beter images then ?? 3 or should I just leave it as it is ?? I did not yet connect the TXmon just trying to learn the possibilities of the P3 Regards William K2, KX3, K3, P3, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@sonic.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft] KX2 Evaluation Up Date
My apologizes.I was working with K9TF and his requirement was N1MM interacting with the KX3...I did not make that clear and that's my bad.. -- View this message in context: http://elecraft.365791.n2.nabble.com/Re-Elecraft-KX2-Evaluation-Up-Date-tp7619522p7619533.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] RTTY Contest with the KX3 and Win4K3
What a great combination for search and pounce RTTY. Double click the mark Tone (upper tone peak) and go! The KX3's built in RTTY engine worked 100% with no other RTTY programs required. MMTTY and fldigi were available but not necessary. Very 73 - Mike - K9JRI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft] KX2 Evaluation Up Date
Jim, not quite. Bob's examples work perfectly with the K3/K3S using CW keying on DTR (or RTS) of the radio control port, and on any radio (including the KX2/KX3) if an external keying circuit or Winkeyer is used. It is only when you don't have a Winkeyer or external serial port keying circuit to use with a KX3 or KX2 that you need to use the KY command method (BTW, there is no need to use the CATA1ASC macro instead of CAT1ASC if you are not using SO2R). There are several limitations to the KY command method when used with N1MM+, as described at < http://n1mmplus.hamdocs.com/tiki-index.php?page=Serial+Parallel+and+Sound+Card+Interfacing=N1MM+Logger+Documentation#Choosing_Your_CW_Method >. 73, Rich VE3KI K9JWV wrote: Bob - none of your examples will work with an Elecraft KX3 and/or, I believe, a K3 or KX2...any macro for my KX3 must look like below (everything after KY and before ;} is what you can alter, up to 24 characters including spaces): F1 CQ, {CATA1ASC KY CQ TEST k9jwv k9jwv test;} __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K3] Strange filter behaviour in the subRX
After a user reported problems with filter settings in N1MM+ in SO2V with one VFO in CW and the other VFO in SSB, I did some investigating. I had never tried mixed-mode dual receive before. After doing some experimenting, first with N1MM+ and then with the radio on its own, I conclude that there does appear to be a problem, but it seems to be in the K3 firmware, not in N1MM+. After some initial exploration, I ran audio spectrum analysis software on the Line Out output of the K3 with band noise input on a dead band, default filter settings and with no radio control software of any kind running. With both VFOs in SSB, the noise spectrum display is similar for both VFOs - reasonably flat (plus or minus a few dB) from 200 Hz to 2800 Hz, more or less. If one VFO is in CW and the other VFO is in SSB (or DATA A, which seems to behave the same way), the VFO A SSB plot looks the same as before, but when I use the K3's A/B button to swap VFOs, the spectrum display for VFO B in SSB looks quite different, with a more or less linear rolloff of roughly 10 dB/kHz (not per octave, per kHz) from 700 Hz to 2700 Hz. That is, at 1700 Hz the spectrum plot is down around 10 dB from the value at 700 Hz, and at 2700 Hz it is down around another 10 dB. The difference is clearly audible. I can fix this by pressing the B-SET button on the K3, which restores a flat response profile in VFO B, but when I press A/B twice to swap the SSB and CW settings between the two VFOs twice, the rolloff comes back when VFO B is in SSB mode. Has anyone else seen anything like this? Is there a configuration setting that can fix it? 73, Rich VE3KI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Missing Step for K-POD Front Panel Mod
Yes, that was fixed long, long ago. A screw head struck the edge of one of the boards in early K3 front panel assemblies. It wasn't noticed for a while because in the process of prying the connectors apart, the edge of the pc board chafing against the edge of one board was not noticed. I'm surprised you found it on a K3 as late as 3329. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Alan Sewell N5NA Sent: Saturday, July 2, 2016 2:24 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Missing Step for K-POD Front Panel Mod I received my K-POD this afternoon and proceeded to do the front panel mod. The instructions say to simply remove the 3 top and 2 bottom front panel screws and pry off the front panel. In the past I recalled needing to remove the left side panel but couldn't really remember why. When I was unable to pry the left side of the front panel loose I removed the left panel and remembered why I had to do that in the past. There is a round head screw on the bottom front 2D fastener that must be removed for the board to slide out. After I removed that screw it was no problem. The instructions need to include this step. My K3 is SN 3329. Perhaps later K3s don't have that round head screw. 73, Alan N5NA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX1 - Voltage vs Power
Hi, I have my KX1 hooked up to an external filtered adjustable power supply. Does the below look reasonable for Voltage vs Power on ATU tune-up? SWRs all read 1.3-1.5 8-14V 14V - 2.8-2.6W (which rapidly dropped to 2.0-2.1 over 3-5sec) 12V - 2.0-2.1W 10V - 1.5-1.6W 8V -0.9-1.1W Thanks, 73s, Bret/KC1CJN bedford, NH USA -- View this message in context: http://elecraft.365791.n2.nabble.com/KX1-Voltage-vs-Power-tp7619529.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Missing Step for K-POD Front Panel Mod
I received my K-POD this afternoon and proceeded to do the front panel mod. The instructions say to simply remove the 3 top and 2 bottom front panel screws and pry off the front panel. In the past I recalled needing to remove the left side panel but couldn't really remember why. When I was unable to pry the left side of the front panel loose I removed the left panel and remembered why I had to do that in the past. There is a round head screw on the bottom front 2D fastener that must be removed for the board to slide out. After I removed that screw it was no problem. The instructions need to include this step. My K3 is SN 3329. Perhaps later K3s don't have that round head screw. 73, Alan N5NA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] GoBox for the KX-2
-- Forwarded message -- From: "Ken G Kopp"Date: Jul 2, 2016 2:51 PM Subject: Re: [Elecraft] GoBox for the KX-2 To: Cc: BUT ... All the TX heat is trapped inside the box with nowhere to go! It -will- be a serious problem! 73 Ken - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] GoBox for the KX-2
BUT ... All the TX heat is trapped inside the box with nowhere to go! It -will- be a serious problem! 73 Ken - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K-Pod] K3 firmware K3 Utility Program Requirements
Yes, just received mine too - Hey Elecraft, where is v 1.16.3.11 hidden??? Beautiful work of art indeed! 73 Dwight NS9I On 7/2/2016 11:00 AM, Roger Marrotte wrote: I just received my K-Pod. It looks and feels really nice. Nice and heavy. Won't wander across the desktop. The manual mentions requiring K3 firmware version 5.50 or later. I found that in the beta section and loaded it without problem. The manual also mentions "Be sure you have K3 utility Program rev. 1.16.3.11 or later installed on your personal computer (older versions will not allow you to store macros 9-16)". That I had a problem with. I can't find it on the Elecraft web site. Is it available yet? I don't yet have more than 8 macros so it's not a crisis. Roger, W1EM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ns9i2...@bayland.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft] KX2 Evaluation Up Date
Bon - none of your examples will work with an Elecraft KX3 and/or, I believe, a K3 or KX2...any macro for my KX3 must look like below (everything after KY and before ;} is what you can alter, up to 24 characters including spaces): F1 CQ, {CATA1ASC KY CQ TEST k9jwv k9jwv test;} 72 de Jim R. K9JWV -- View this message in context: http://elecraft.365791.n2.nabble.com/Re-Elecraft-KX2-Evaluation-Up-Date-tp7619522p7619524.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Microphone For Sale (K7KEY)
Very nice, almost pristine, Astatic D-104 Silver Eagle. With W2ENY element and Elecraft 8-pin connector installed. Chrome is fully intact, and you have to search really hard to find any scuffs. Asking $100 with free shipping. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft] KX2 Evaluation Up Date
Jim, Regarding how to reprogram the F key messages in N1MM, simply right click on any F key block in the N1MM window and all the messages will pop up in an editable mode. You can type in anything you want. The format is this: ExampleF1 CQ,CQ FD de K9TF K9TF The first CQ and anything BEFORE the comma is shown as a label for the F key. Everything AFTER the comma will be sent as your message. The first F1- F12 keys are the messages sent while in CQ mode and the second set of F1- F12 (shown in GREEN) are the S messages. You can save these per contest by simply chosing FILE - "SAVE THESE MESSAGES TO A DIFFERENT FUNCYION KEY .MC FILE NAME". If you have any questions, let me know and I'll give you a hand. Bob K5WA Message: 12 Date: Fri, 1 Jul 2016 13:00:26 -0500 From: Jim GMTo: Elecraft Subject: [Elecraft] KX2 Evaluation Up Date Message-ID: <5776afb6.0d2e240a.9b45e.3...@mx.google.com> Content-Type: text/plain; charset="utf-8" I worked 15 stations on Field Day weekend with in an hour on my 160m antenna on 20M. Worked just fine. Started to use N1MM logging and attested programming F keys for CW found the infor on line and help from K9JWV got it working through only ONE USB port. Do not know what the KY codes are or where they came from. Some of the function keys on the program needs to be reprogrammed in N1MM and have not found out where or what to put in yet. Progress is slow but making progress. Showed off my New KX2 at about 4 Field Day sites and most were impressed on the size and what it could do. I did not have N1MM working at the time. Maybe I would have gotten more jaws dropped if I had that Canadian program running. No one afford to connect my KX2 to their Field Day antenna and give it a ride. I found that strange. Maybe I should have offered Found that a bit strange Now if I can switch the keys with Windows 10 and just let the F buttons work like F buttons and not do brightness and the sort, I will be in good shape. Jim K9TF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K3] Re: K-pod - is it shipping?
On 6/30/2016 7:20 PM, Keith Onishi wrote: > Re: K-pod - is it shipping? Received my K-Pod today via USPS. When updating the K3 firmware to beta 5.50 to support the K-Pod, the update failed and left me in MCU LD bootloader mode. Disconnected the P3 power and restarted the K3 Utility. The Utility then found the K3 was in bootloader mode and allowed a "Send All Firmware" to proceed normally. Recovered K3 successfully. I wish the rocker switch was a bit lower, and away from VFO knob, as it is very easy to skew the freq a bit as you go to move the rocker switch.Used an audio style RCA male to twin RCA female ("Y") to split power for P3 and K-Pod.K-Pod working as designed. Will perform the power mod after I finish up getting the bonus station GB13COL as part of the 13 Colonies special event going on right now. (He keeps setting up 2K away from state-side Nets and is very light! Argh.) Haven't programmed any macros for the function keys yet. Will need to source a longer RJ12 data cable for the K-Pod. Interested in something about 12-14 ft. Hopefully, the protocol will support that length. Warren, KD4Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 4m transverter (UK)
I have a couple of questions asking why I am selling the 4m transverter for the KX3. (Is it no good? etc) The reason is simply that I want to be able to work on 144 MHz with my KX3 wit external transverter AND monitor 70 MHz or 50 MHz, so I have another rig that covers 50/70 MHz and a dual band yagi for that now. The 4m transverter is therefore surplus to my needs. No point in having 2 4m rigs here, better that another station uses it so I have another station to work on 4m :-0 73 David GM4JJJ > On 2 Jul 2016, at 11:58, David Anderson via Elecraft >wrote: > > For anyone in the UK with a KX3 who wants to get on 4m, I have an Elecraft > internal transverter for the KX3 available for sale. I am prepared to fit it > to your KX3 if you bring it to my QTH. > > Price £169 fitted to your KX3. (List price is £269) > > Can also ship this item, buyer pays postage. > Cash on collection or PayPal accepted - buyer pays PayPal fees. > > In addition I have a new and unused 5 element light weight PowAbeam Yagi. > > http://www.thedxshop.com/powabeam-antennas/70mhz-5-element-max-gain-4m5n50u.html > > Ideal for portable or fixed station use. > Still in unopened box. > > Price £89 (List £94) > > Buyer collects only please. > > Cash on collection or PayPal accepted - buyer pays PayPal fees. > > PS I can also perform the Extended VFO Temperature Calibration on the KX3, > this is recommended for 70 MHz SSB/CW. > > 73 David Anderson GM4JJJ > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to gm4...@yahoo.co.uk __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K-Pod] K3 firmware K3 Utility Program Requirements
I just received my K-Pod. It looks and feels really nice. Nice and heavy. Won't wander across the desktop. The manual mentions requiring K3 firmware version 5.50 or later. I found that in the beta section and loaded it without problem. The manual also mentions "Be sure you have K3 utility Program rev. 1.16.3.11 or later installed on your personal computer (older versions will not allow you to store macros 9-16)". That I had a problem with. I can't find it on the Elecraft web site. Is it available yet? I don't yet have more than 8 macros so it's not a crisis. Roger, W1EM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K3, k3S] Panadapter for the Sub Receiver
I'd definitely buy a second P3 for my sub-RX if the IF Out was on the back panel and it was incorporated into the firmware... __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 7/1/2016 5:04 PM, Bill Frantz wrote: > Thanks Don. > > Part of my reasoning for posting was that this feature might increase > sales of P3s. Given the relative lack of interest, I think it remains > a user mod. (But my K3 might look nice with 2 P3s on top of it. :-) > > 73 Bill AE6JV > > On 7/1/16 at 5:28 AM, donw...@embarqmail.com (Don Wilhelm) wrote: > >> Bill, >> >> Getting the IF output from the subRX is not a problem, but adding the >> 'new protocols' would likely be a problem. >> >> So if you just want to monitor the band around wherever the subRX is >> tuned, that part is easy, just add an IF output to the subRX. I have >> done that to one customer's K3, it is not difficult. >> >> 73, >> Don W3FPR >> >> On 7/1/2016 1:49 AM, Bill Frantz wrote: >>> One of our field day operators announced that while he was making >>> QSOs on active bands, he was going to use the sub receiver in his K3 >>> to scan for 10M CW activity. It occurred to me that this kind of >>> scanning would be a lot easier if you could attach a second P3 to >>> the K3 sub receiver. >>> >>> It seems simple. You would need an IF out from the sub receiver, and >>> some new protocols on the aux bus. e.g. QSY on the sub P3 QSYs the >>> sub receiver. etc. >>> >> > --- > Bill Frantz|The nice thing about standards| Periwinkle > (408)356-8506 |is there are so many to choose| 16345 Englewood Ave > www.pwpconsult.com |from. - Andrew Tanenbaum| Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Bought a second hand P3 with 2 KW TX sensor question
William, The images will not be changed by the TX MON. The resolution of the power display on the P3 will be increased by a factor of 10 if you change to the DCHF-200a - you can order one from Elecraft. 73, Don W3FPR On 7/2/2016 2:59 AM, will...@zendamateur.nl wrote: I have a K3 100 Watt and i bought a P32 with VGA and TXmon, the TX Monitor is 2 Kw. I was thinking because of the fact that I am only working with 100 watt would it be worth reducing the sensor to 200 Watt ?? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] OT - VSP, com0com and Win4K3
While attempting to connect Win4K3's AUX1 com port to DXLabs Commander via HHD's Virtual Serial Port I was unable to communicate from Win4K3 (frequency and mode data)to Commander even though all commands sent from Commander to Win4K3 were being received and properly executed. A support request to Tom was quickly answered with "VSP doesn't work correctly, use cm0com.". He provided a link to a signed copy of com0com which I installed and all worked well. I was surprised as I have used VSP for years with other software (PowerSDR, HDsdr, Omnirig, fldigi, WSJT, HRD) without issue. THE QUESTION IS: While I realize that the problem could be with either VSP or Win4K3 I do not have the necessary monitoring software to allow me to actually look at the data flow between the two. Has anyone looked at this issue with VSP/Win4K3 AND has been able to determine what the technical issue is that prevents VSP and Win4K3 from successfully communicating with each other? HARDWARE: Intel i5, 2.4 gHz., 8 gig of RAM Windows 10, 64 bit, latest updates VSP 3.22 com0com 2.2.2.0-64 signed Elecraft KX3 Elecraft USB serial adapter connecting KX3 to CPU. Michael Blake k9...@icoud.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: KX3 4m transverter (UK)
For anyone in the UK with a KX3 who wants to get on 4m, I have an Elecraft internal transverter for the KX3 available for sale. I am prepared to fit it to your KX3 if you bring it to my QTH. Price £169 fitted to your KX3. (List price is £269) Can also ship this item, buyer pays postage. Cash on collection or PayPal accepted - buyer pays PayPal fees. In addition I have a new and unused 5 element light weight PowAbeam Yagi. http://www.thedxshop.com/powabeam-antennas/70mhz-5-element-max-gain-4m5n50u.html Ideal for portable or fixed station use. Still in unopened box. Price £89 (List £94) Buyer collects only please. Cash on collection or PayPal accepted - buyer pays PayPal fees. PS I can also perform the Extended VFO Temperature Calibration on the KX3, this is recommended for 70 MHz SSB/CW. 73 David Anderson GM4JJJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S new synthesizer query
My K3 has the TCXO 1% 73, Roger -- View this message in context: http://elecraft.365791.n2.nabble.com/K3S-new-synthesizer-query-tp7619407p7619514.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 WSPR 2, ver 1.6
Ai4PF wrote > everything works fine on WSP 2 except I never see any of my numerous TX's > in the database. Do you receive (decode) other WSPR stations? If yes, frequency and PC time are ok. During TX, does your ALC show 4-5 bars? 73, Markus HB9BRJ -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-WSPR-2-ver-1-6-tp7619451p7619513.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Bought a second hand P3 with 2 KW TX sensor question
Hi group, I have a K3 100 Watt and i bought a P32 with VGA and TXmon, the TX Monitor is 2 Kw. I was thinking because of the fact that I am only working with 100 watt would it be worth reducing the sensor to 200 Watt ?? 1 I don't know if it is possible. 2 I don't know if I see beter images then ?? 3 or should I just leave it as it is ?? I did not yet connect the TXmon just trying to learn the possibilities of the P3 Regards William K2, KX3, K3, P3, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com