Re: [Elecraft] P3 Waterfall

I recently saw this happen on W6NV's P3 after upgrading the firmware from a very old version to the most recent version in one jump, or perhaps I accidentally removed power from the back of the P3 while it was on, while simultaneously bumping one of the front panel buttons. Reloading the firmware

Re: [Elecraft] P3 Waterfall

Tap the upper right button. Sent from my iPhone ...nr4c. bill > On Apr 10, 2018, at 10:14 PM, Fred Jensen wrote: > > My P3 waterfall disappeared when I turned the rig on tonight. WF Height > shows the line, and it moves with the knob, but no WF, just a very tall >

[Elecraft] K3S birdies?

Hi All. I've been monitoring this list for a while, and have gained some useful insights from the posts. And now I have a question... I built my K3S #11310 last July, and I added the 100 watt amp and sub-receiver last December. A few weeks ago, I started hearing some unusual tones around

[Elecraft] P3 Waterfall

My P3 waterfall disappeared when I turned the rig on tonight.  WF Height shows the line, and it moves with the knob, but no WF, just a very tall spectrum display.  No SVGA. I'll maybe reload the FW tomorrow. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County

Re: [Elecraft] KAT500,KPA500

You'll need a KXUSB (if your computer has USB hubs) or a KXSER (if your computer has a true RS-232 port) or make up the equivalent. These are available from Elecraft, on the product list (www.elecraft.com/elecraft_prod_list.htm) The KAT500 has a very limited number of LEDs and buttons for user

[Elecraft] KAT500,KPA500

Good evening everyone. I just added a used KAT500 to my lineup (waiting for the KPA1500 backlog to clear before I order) and it's working great.  The person that I purchase it from did not include the RS232 cable that has the small data jack on the one end to program the KAT500. I use one

Re: [Elecraft] Astron VS-35M Powwer Supply V-

Hi Joe, You made a comment about "bolted" connections. I hope I understood you correctly, as I now don't feel so bad about using old fashioned screw terminal blocks for all DC power. I feel they provide solid, unmoving, and permanent connections. I do not like the push on Power Poles, as I

Re: [Elecraft] Astron VS-35M Powwer Supply V-

On 4/10/2018 3:21 PM, Jim Brown wrote: > I'm probably the source of this, although W8JI and W4TV have also raised this issue. See comments below. >> Does that negative rail need to be bonded to the chassis? > > No, and in general, it should NOT be bonded. You *DO NOT WANT* the station

Re: [Elecraft] Astron VS-35M Power Supply V-

Jim- thanks much for the quick reply. Very helpful 73Paulkc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

Re: [Elecraft] Astron VS-35M Powwer Supply V-

Hi Paul, I'm probably the source of this, although W8JI and W4TV have also raised this issue. See comments below. On 4/10/2018 11:48 AM, paul ecker via Elecraft wrote: I have been working on bonding my station equipment and have come the issue of bonding/RFI fixes to the VS-35M. I have read

[Elecraft] Astron VS-35M Powwer Supply V-

I have been working on bonding my station equipment and have come the issue of bonding/RFI fixes to the VS-35M. I have read that it is suggested to scrape the paint around the green wire from the ac round plug attachment point to the case. But there is also a small black wire that bonds the V-