Admittedly, I am a new owner of the K3s and am still learning my way
around it. I bought it mainly for use an IF radio for my DEMI 2 mtr
xvtr, which I use for EME work. It came highly recommended as one.
Prior to the K3s, my EME workhorse radio was a Kenwood TS2K which
actually worked "fine"
Hi all
Anyone have the non-tuner antenna interface card they'd like to part with?
Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
I can't speak to the Mac part but it was a bit of a learning curve
(and I VERY computer literate - heck I code!) to get my K3S working
smoothly with several different software applications but now
everything - audio in/out, PTT and CAT commands are all handled
through one USB cable.
It's
You really worried about 1.67 dB?
At 10:16 AM 5/27/2016, Alan Geller via Elecraft wrote:
The KX3 is now being positioned as the 15 watt
big brother to the smaller KX2 âup to 10
wattsâ version. The upper limit on my KX3
power adjustment seems to have always been
around 10.2 watts. How
Unless it's changed since the K3s came out:
http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf
Ken
At 07:32 AM 5/27/2016, David Anderson via Elecraft wrote:
Is there a schematic diagram for the KX3 internal transverter series
available?
I was sure I had seen one at some point in the
Hi David
As I said, unless it's changed since the K3..
(I'm not sure it has)
Ken
At 08:54 AM 5/27/2016, David Anderson wrote:
Sorry Ken, that appears to be the K3 not KX3.
73 from David GM4JJJ
> On 27 May 2016, at 16:06, Ken Arck <k...@arcomcontrollers.com> wrote:
>
&
I bought my K3S/10 for use mostly with a 2 meter transverter for EME
work and 6 meters (easily drives my LDMOS SSPA to 1 KW.
My interest in HF is..passing
Ken, AH6LE
At 04:41 PM 6/1/2016, Kevin Stover wrote:
I'm probably going to regret sending this and this is just my opinion.
It
report ?
73 Robert W5AJ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken
Arck
Sent: Sunday, June 12, 2016 8:27 PM
To: <mailto:elecraft@mailman.qth.net>elecraft@mailman.qth.net
Subject: [Elecraft] Performance of internal USB sound system compar
I have a set of KOSS SB 40's and they're great on the RX side but the
cheap dynamic mic that comes as part of it sounds like @#*^%#@ on TX,
regardless of how I've tried to compensate using the EQ
Ken
At 10:27 AM 5/26/2016, Dave Hachadorian wrote:
I forgot to mention that the SB-45 also
Hello fellow 10 watt K3 owners!
As my main use for my K3s is 6 meter and 144 EME operation, I bought
the 10 watt version without the antenna tuner. I dabble a little on
HF but not a whole lot. As such, the 10 watt, no tuner version suits
my needs, although I thought it would be nice to be
If you look at the schematics of the KATU, you'll see the chain of
shift registers on the KATU actually sends a signal back to the RF
board. So the CPU sends the command to the KATU and if the ATU
doesn't respond (via the MISO3 line), the CPU interprets that to mean
the KATU isn't present
As
I had it assembled in a few hours and only one glitch - one of the
TMP coax connectors had an intermittent so I was getting no Reference
to the synth board. I re-crimped the connector and voila! it all came to life.
Now I'm just letting it burn in overnight and I'll calibrate it using
a GPSDO
the radio)
Win 10 on a 64 bit, 3.5 gHz machine
Ken
At 07:00 PM 5/20/2016, Ken Arck wrote:
Thanks to everyone who responded.
As I already had the USB Codecs installed for a Yaesu radio, I
thought maybe there were different ones for the K3. I'll do some
playing, thanks
Ken
At 06:19
as
a record/playback device. That's it.
Sent from my iPhone
...nr4c. bill
> On May 20, 2016, at 7:29 PM, Ken Arck <k...@arcomcontrollers.com> wrote:
>
> I can't seem to find anything in the manual about this but I
presume there is some driver needed to use the USP port for audio
as
behalf of Ken
Arck <k...@arcomcontrollers.com>
Sent: Sunday, May 22, 2016 4:23 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] PTT KEY CONFIG setting volatile?
I notice the PTT KEY selection under CONFIG doesn't appear to be
non-volatile as when the radio is power cycled, it always re
I notice the PTT KEY selection under CONFIG doesn't appear to be
non-volatile as when the radio is power cycled, it always reverts to
OFF - OFF. I'd like it to stay set to DTR -- RTS but it doesn't
Even if I leave 13.8 to the radio, turning it OFF and back ON and
that setting reverts.
Well..it seems the only way for the USB audio from computer > radio
to work is for radio to be in DATA mode.Duh..
Thanks to all who responded
Ken
--
President and CTO - Arcom Communications
Makers of repeater
I can't seem to find anything in the manual about this but I presume
there is some driver needed to use the USP port for audio as well as CAT/PTT?
Ken
--
President and CTO - Arcom Communications
Makers of repeater
I just ordered my K3S kit over the weekend. Hopefully it will ship
before you guys leave for Dayton!
Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
Obvious question - did you check it with an external wattmeter/dummy load?
At 05:48 PM 7/26/2016, Chris Kimball wrote:
I'm a new owner and all worked fine. After an absence of a few days I came
back to no power out, or , at least, very little.
Rig is the 100W version with ATU working into a
Hello fellow K3 owners!
I still have some boards available if anyone is interested and I'm
happy to report they work just fine with the KPA3 installed as well!
As my main use for my K3s is 6 meter and 144 EME operation, I bought
the 10 watt version without the antenna tuner. I dabble a
From 2006? Really?
At 07:28 PM 7/29/2016, a...@juno.com wrote:
Here are those pics:
http://www.n6ie.com/Elecraft.html
I'm thinking it's the next logical major item for Elecraft to offer.
John AE5X
http://ae5x.blogspot.com/
___
and saw a 1kw or more Elecraft prototype.
Man, if I could only fit all that in my Corvette
Ken
At 11:00 AM 7/31/2016, Edward R Cole wrote:
We bought a new truck this week: 2015 (new from dealer) Ford F250
crew cab diesel 4x4:
http://www.kl7uw.com/New_Rover_1.jpg
Saved $17K off msrp since it will be two years old when 2017 models
What didja need to know?
I use my K3s regularly on JT65B (all via USB)
Ken
At 04:22 PM 8/2/2016, Bill Leonard N0CU wrote:
I saw this info on one of the websites a few weeks back but I can't find it.
Thanks,
Bill N0CU
--
View this message in context:
I'll just throw this out there
What ever happened to the Ham Spirit of rolling your own? With the
new MOSFETS devices out, it is not that expensive (nor difficult) to
"roll your own"
Here's what I did for 6 & 2 meters:
http://ah6le.net/index.php/vhf-solid-state-kilowatts
Ken
Guess I can't attach a pic so here's a URL to it
http://www.ah6le.net/k3_key.jpg
Ken
At 07:46 AM 7/18/2016, Ken Arck wrote:
Hi Ken
I too use a DEMI xvtr and used the following circuit to exploit the
K3's capability to set a logic bit on the ACC connector based on band
Ken
At 09:33
Hi Ken
I too use a DEMI xvtr and used the following circuit to exploit the
K3's capability to set a logic bit on the ACC connector based on band
Ken
At 09:33 PM 7/17/2016, Ken Kontor via Elecraft wrote:
Gentlemen,
I am looking for a circuit that one of you K3 users may have
designed to
As those of us active in EME would say..
No s***
Ken
At 04:04 PM 8/1/2016, Josh Fiden wrote:
If cost per QSO were a concern, no one would ever work EME. Just sayin'.
Back to waiting for this thread to die!
73,
Josh W6XU
On 8/1/2016 10:47 AM, Fred Moore wrote:
I always wonder that some
Hi all
I've been trying to set up a couple different microphones with my K3s
and have noticed they all sound horrible using MONITOR but on another
radio, they sound good. Specifically, it doesn't take much level
before they sound distorted, and way too."midrangy?" whereas
listening to it
Oh yes...holding POWER for more than 10 seconds does nothing either.
I have a feeling it's going back to Elecraft next week...
-Original Message- From: Ken Arck
Sent: Saturday, July 02, 2016 8:13 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Well Hell I just
Just finished installing the 100 watt PA and all was going fine until
the 14 mHz 50 watt calibration (using the K3 Utility program). The
radio went dead and nothing I've tried brings it back to
life...GRR
I removed power completely, let it sit for 10 minutes, reconnected
and
Thanks to all who replied to my plea for help!
I did find the problem this morning and man, it was not what I
expected. The problem turned out to be that power was not getting to
the radio. Well,,, actually it WAS getting to the radio - to the
Power Poles - but no further. I decided to poke
-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
lmarion
Sent: Sunday, July 03, 2016 11:49 AM
To: elecraft@mailman.qth.net; Ken Arck <k...@arcomcontrollers.com>
Subject: Re: [Elecraft] Well Hell I just bricked my K3s
What a relief!! I love my K3S, and hope every h
on/off depending on the mic insert?
What is the model MIC?
Gary
--
From: <mailto:k...@arcomcontrollers.com>Ken Arck
Sent: â2/â07/â2016 7:32 AM
To: <mailto:elecraft@mailman.qth.net>elecraft@mailman.qth.net
Subject: [Elecraft] Monitor in SSB sounds "crummy" K
than speaking into a
microphone without that acoustical reinforcement. For that purpose,
it does not have to represent the full audio response - but I agree
it should not be distorted by design.
73,
Don W3FPR
On 7/1/2016 5:31 PM, Ken Arck wrote:
Hi all
I've been trying to set up a couple
If you really want an improvement, you should move the preamps to
your masthead.
(not to rain on your parage but you do realize that the .5 dB noise
figure is essentially meaningless if the preamp is in your shack, right?)
Ken
At 01:32 PM 1/25/2017, you wrote:
I love my K3s and have been
Well, I don't want this to devolve into an OT issue but it is well
established that any feedline loss ahead of the receiver adds to the
total noise figure of the system. (outside influences such as sky
temperature, local noise sources, etc notwithstanding)
So if you place a preamp with a NF
Seems to me that IMD might be noticeably worse that way
At 01:25 PM 2/22/2017, Harry Yingst via Elecraft wrote:
Seeing how the KPA- 500 tends to need less than
25 watts to drive it to full output (500 watts)
It got me thinking about a 25 watt PA
Option. Would it be possible to replace
Not to hijack this thread but has anyone used WSJT-X 1.7 and JT65B
with the K3s?
Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
I've been using an external xvtr with my K3s for a while now and over
the weekend, I installed the internal K144XV one. The internal is set
as #1 and the external is set as #8 (the external has always been
defined as #8).
Now I notice that CAT control (to change the freq) calls #1 and not
#8
d by the transverter.
73,
Don W3FPR
On 8/22/2016 11:35 AM, Ken Arck wrote:
I've been using an external xvtr with my K3s for a while now and
over the weekend, I installed the internal K144XV one. The internal
is set as #1 and the external is set as #8 (the external has always
been defined as
Well it took me a few hours to do... quite simple and well worth
the savings actually...
Ken
At 05:55 PM 9/5/2016, Jim Brown wrote:
On Mon,9/5/2016 5:25 PM, Bill DeVore wrote:
Is building worth the $200 in savings?
Absolutely! $200 will get you about 40 double expressos at
I had the same problem - turned out to be noise from the computer (I
was using the USB CODEC for audio in/out to the computer).
Ken
At 06:41 PM 9/18/2016, Fred Jensen wrote:
OK, this reply is to the list, lots of very smart and experienced folks there.
Let's see what others come up with
match the addressing of that decoded by the transverter.
73,
Don W3FPR
On 8/22/2016 11:35 AM, Ken Arck wrote:
> I've been using an external xvtr with my K3s for a while now and over
> the weekend, I installed the internal K144XV one. The internal is set
> as #1 and the external is set as #8
Only if the bandwidth is narrower
(all things being equal, there is no difference in noise floor
between SSB and CW if the bandwidth is identical)
Ken
At 11:11 AM 11/19/2016, Phil Wheeler wrote:
CW or maybe it's just because CW is quieter than SSB?
Phil W7OX-- Sent from my iPhone 5S
> On
The narrower the bandwidth, the better signal to noise.
That should answer your question :-)
Ken
At 07:39 PM 10/15/2016, Robert G Strickland wrote:
When using the APF, does it make a difference which bandwidth has
been selected? Or in other words, does APF work better on top of a
narrow or
I calibrate all my rigs with the WWV/spectrum display software method
and it's never gotten me in trouble! From my K3s to my TS2000 to my
FTDX3000, they all are dead nuts on thanks to this easiest of methods!
Ken
At 01:22 PM 12/18/2016, ab2tc wrote:
Hi,
Boy, this thread is now incredibly
My Surface Pro sucks with driver compatibility
issues so perhaps that is your proble.
My "ham" computer runs Win 10, 64 bit and no
problems at all connecting to the K3s with anything
Ken
At 03:43 PM 12/18/2016, Rick Braun wrote:
I downloaded the latest K3 utility onto my
Surface Pro 4
The issue with the Prolific chipset (or more
accurately, the counterfeit driver issue) is well
known and well documented as affecting Win 7 and later
At 04:16 PM 12/18/2016, Nr4c wrote:
Which KUSB? The older Prolific or the more
recent FTDI? Different drivers. Sent from my
iPhone ...nr4c.
Do you have "Allow Tx frequency changes while transmitting" TX
checked under Settings?
Ken
At 04:39 PM 12/21/2016, Howard Sherer wrote:
I have installed the new version of WSJT-X and when changing the bands on
my K3s, I get the ERR KEY code on the display and the K3s is forced into
Tx. I
I would be interested in the P3. Please contact me offlist
Ken
At 09:46 AM 3/24/2017, Phil Hystad wrote:
I am posting this ad for a friend, Fred KE7FB,
who is reluctantly selling his K3+P3. Fredâs
e-mail address is listed below and you can
contact him or I or both of us for any questions
Note today's date... April 1st
At 09:14 PM 4/1/2017, Vic Rosenthal 4X6GP wrote:
And it even does SO2R.
73,
Vic, 4X6GP
Rehovot, Israel
Formerly K2VCO
http://www.qsl.net/k2vco/
On 1 Apr 2017 20:17, Doug Turnbull wrote:
Dear OMs and YLs,
We CW ops will be happy with this piece; Morse is
Whatever you do, if they ask for your KX2 to give up its seat for a
crew member, don't argue!
At 08:47 AM 5/14/2017, you wrote:
Taking KX3 on Airlines -Any issues/hassles with TSA/etc here days -
with Bio-Engg 12V 7Ah Lithium Battery as Carry On Luggage
USA to Hawaii
USA oversea's
I have 16 countries on 6 meters (and 82 on 2 meters!)
Ken
At 10:09 AM 6/22/2017, Wayne Burdick wrote:
Just had a quick QSO with K7CW in CN87, and
Iâm hearing a strong beacon from Kansas.
DXmaps.com has red all over :) At times like
this it pays to jump on 6 meters. 73, Wayne N6KR
I believe the internal xvrtr routes the rcv antenna connection
through a header on the board and in normal operation, that is
jumpered. I would think you can remove the jumper and use the header
to make your receive connection
Ken
At 11:18 AM 1/1/2018, Jim Spears wrote:
Happy New Year to
When we lived in SoCal, we used to spend just
about every summer weekend at the Isthmus or
Emerald Bay (we had a Catalina 36 sailboat and
did the backstay antenna thing).
Wish Elecraft was around back then
Ken
At 10:21 AM 7/28/2018, Wayne Burdick wrote:
Last week my family and I went to
Already discussed - you need to wait for the next release
Ken
At 09:43 AM 1/7/2019, Richard wrote:
Has anyone figured out how to stop that "2.0 only" message from
popping up every time you launch WSJT-X 2.0?
Richard - W4KBX
__
As I've received some offers, I've modified my asking price and will
accept resonable offers!
K3S/100 with current firmware. In like new condition - no scrapes,
scratches, etc.
K144XV-K 2 meter internal transverter
K144RFLKV Reference Lock
Basic filters as received from Elecraft
No
Rig is sold, thanks for the interest
Ken
At 02:58 PM 2/6/2019, Ken Arck wrote:
K3S/100 with current firmware. In like new condition - no scrapes,
scratches, etc.
K144XV-K 2 meter internal transverter
K144RFLKV Reference Lock
Basic filters as received from Elecraft
No tuner but custom
K3S/100 with current firmware. In like new condition - no scrapes,
scratches, etc.
K144XV-K 2 meter internal transverter
K144RFLKV Reference Lock
Basic filters as received from Elecraft
No tuner but custom board that allows selection of ANT1/ANT2 from
front panel button.
$2,700, shipped
60 matches
Mail list logo