[Elecraft] Possible for KPOD to control P3?

Hello all. I just became the proud owner of a KPOD to add to my Elecraft stable. Lots of times, especially when S in contests, I tune my K3S with my P3. Is it possible to configure the KPOD to emulate the "select" control on the P3, and then program one of the Function buttons to emulate

[Elecraft] Width adjustment of Manual Notch Filter on K3S

Hello. Is it possible to manually adjust anything other than the position of the notch filter on the K3S. I recently was working FT8, when a ham relatively close to me was desensing my receiver when working FT8 on the same band. I was able to notch him out by manually setting the filter, but it

Re: [Elecraft] Computer control of message playback on K3S?

ation". That sounds better than "being lazy":-). Thanks again! 73, Ken, KJ9B -Original Message- From: Mike Flowers [mailto:mike.flow...@gmail.com] Sent: Wednesday, August 07, 2019 4:16 PM To: 'Ken Bandy, KJ9B'; elecraft@mailman.qth.net Subject: RE: [Elecraft] Compute

[Elecraft] Computer control of message playback on K3S?

I am wondering if there is a command sequence string that will play a recorded message on my K3S. I have looked through the programmer's guide for the radio, but nothing popped out at me before my eyes glazed over... Thanks in advance. Ken, KJ9B

Re: [Elecraft] Tours?

Thanks for all of the replies. I will give them a call tomorrow. The last I checked, it was around 4 or 5 hours from where we're staying (Thousand Oaks). Hopefully we can make it work. Otherwise, we'll catch it another time. 73, Ken, KJ9B -Original Message- From:

[Elecraft] KPA1500 Kit?

Are there any plans yet for a KPA 1500 in Kit form? 73, Ken, KJ9B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

Re: [Elecraft] JT-65

Hi Steve, if you're still using DXLabs, you can use MultiPSK, which utilizes the "Commander" module of DXLab Suite. That's what I do, and it works perfectly. No additional hardware needed with the K3S, just the USB interface from the radio to the PC. Only thing to watch out for is to make

[Elecraft] Connecting K3S to PC

New guy here. I'm the same guy that had the problem with the KSYN3A board not checking out in my new build. After an email from Gary, AB7MY, at Elecraft, I removed and reinstalled the board, and it magically worked OK! Anyway, I got to the part in the checkout of the build where I am

Re: [Elecraft] Connecting K3S to PC

Thanks very much, Bill! I looked at that configuration menu, but didn't scroll through it to "USB". GEEZ! 73, Ken, KJ9B -Original Message- From: Nr4c [mailto:n...@widomaker.com] Sent: Tuesday, September 08, 2015 10:33 PM To: Ken Bandy, KJ9B Subject: Re: [Elecraft] Conn

Re: [Elecraft] Problem with K3S build

the status of the synthesizer. I have to work tomorrow, but I'll send an email to Elecraft and see what they have to say. Thanks again! 73, Ken, KJ9B From: RIchard Williams [mailto:richarddw1...@yahoo.com] Sent: Monday, September 07, 2015 5:33 PM To: Ken Bandy, KJ9B Subject: Re

[Elecraft] Problem with K3S build

Hello all. Last week I received my K3S/100 (S/N 10270) kit, including KDVR3 recorder, KRX3A second receiver, and .5ppm TCXO. After getting the kit assembled per the assembly manual, I got to the checkout phase prior to installing the 100W amp, and second receiver. The unit powered on as it