It indicates that RF Gain is not set to zero.
Sent from my iPhone
...nr4c. bill
> On Jun 18, 2016, at 4:18 AM, Erik Basilier <ebasil...@cox.net> wrote:
>
> Hi All,
>
>
>
> Today I have the S-5 segment stuck on my KX3 display. That is also the SWR 2
> segme
I'd look to reduce the voltage about half a bolt before I'd use it with a KX3.
Sent from my iPhone
...nr4c. bill
> On Jan 18, 2016, at 3:43 PM, John Kramer <jkra...@iafrica.com> wrote:
>
> Someone on this reflector suggested a power supply off eBay, that could be
> used
&g
identify which does what.
Oh yeah, it plugs into the Paddles jack.
Sent from my iPhone
...nr4c. bill
> On Jun 26, 2016, at 9:00 PM, Bill Ellis via Elecraft
> <elecraft@mailman.qth.net> wrote:
>
> Hi ll,
> Trying to set up a single lever paddle for my K3. The more I read
I was informed just now at the Field Day Site that I have a bug in my radio,
s/n 4536. It appears to be crawling around in the LCD display.
Is DDT available anymore?
Sent from my iPhone
...nr4c. bill
__
Elecraft mailing list
Home
When I got my KX3, I built a pair of transistor switches that fit in a DE-9
shell. Added cables for RX/TX, PTT and CW KEYING and now it works just like a
K3 with CAT, PTT and CW using DTR, and RTS from n1mm all from a standard KUSB
that works with the K3.
Sent from my iPhone
...nr4c. bill
Also, you can move the "peak" left/right by rotating the SHIFT knob. You will
see APF setting appear in the VFO B area and the ref point is denoted by an "*"
next to 45.
Sent from my iPhone
...nr4c. bill
> On Feb 5, 2016, at 10:27 AM, David Kuechenmeister <
Nope! Decode doesn't work when displaying Time, Date, Voltage etc. only when
in VFO B mode!
Sent from my iPhone
...nr4c. bill
> On Feb 7, 2016, at 12:38 PM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote:
>
> Depends on how DISP mode is selected. One position is VFO
YMMV.
Sent from my iPhone
...nr4c. bill
> On Feb 7, 2016, at 1:11 PM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote:
>
> The book says "30 to 40 watts for 500 watts output". So if one has 1/2 of
> that for drive power {15 watts to 20 watts} then they can expec
Should be VFO B frequency, not time.
Sent from my iPhone
...nr4c. bill
> On Feb 7, 2016, at 11:16 AM, Bob Novas <bob.no...@verizon.net> wrote:
>
> When I use text decode on my K3S, it works nicely but the time display pops
> up every so often and then goes away. Is this n
Look at the K9AY receive antenna. Only needs a 30 square and 25 ft height.
Sent from my iPhone
...nr4c. bill
> On Feb 8, 2016, at 8:32 PM, Joe Moffatt <j...@selectconnect.net> wrote:
>
> I am needing advice from any with a K3 for 160 receive antennas.
>
> I just don't ha
Sorry. Something else changed.
Antenna?
Mode?
To name two
Sent from my iPhone
...nr4c. bill
> On Jan 30, 2016, at 10:27 AM, Larry Snyder <la...@rn.org> wrote:
>
> PSK31 and JT-65 stopped working on 40 meters. . Initially I see the PO at 45
> watts but then it imm
I think HRD does KY commands as well.
Sent from my iPhone
...nr4c. bill
> On Jan 28, 2016, at 9:41 PM, Don Wilhelm <w3...@embarqmail.com> wrote:
>
> Jer,
>
> AFAIK, the only way HRD/DM780 sends CW is in DATA A mode and sends audio
> tones to the transceiver.
&g
You might need to be in CW mode to turn up the sideline. There are separate
settings for CW and SSB I believe.
Sent from my iPhone
...nr4c. bill
> On Jan 28, 2016, at 8:52 PM, Joe Subich, W4TV <li...@subich.com> wrote:
>
>
>> I use HRD and DM780. It keys my rig and
In all the text you never mention the voltage at the radio DC input under the
TX load.
What did you use to calibrate the "known good" mfj meter?
I'm surprised the TX CAL completed with this result.
Sent from my iPhone
...nr4c. bill
> On Feb 23, 2016, at 10:25 PM, Ia
Reduce the signal level on the computer output. Somewhere. Near 30% will often
give you nice control with Lin In control (Mic gain).
Sent from my iPhone
...nr4c. bill
> On Feb 27, 2016, at 5:17 PM, Sid Frissell <sidfriss...@gmail.com> wrote:
>
> Howdy
> Been using my K3s
Unplug the bencher, and restart the radio. Does the error go away? If so,
check setting and wiring for the bencher. If not, look into radio settings.
Sent from my iPhone
...nr4c. bill
> On Feb 29, 2016, at 2:01 PM, Larry Snyder <la...@rn.org> wrote:
>
> I bought a Bencher B
DX LABS SUITE.
Sent from my iPhone
...nr4c. bill
> On Feb 26, 2016, at 6:30 PM, Terry Brown <n...@comcast.net> wrote:
>
> Hello All,
>
>
>
> I have been using a logging program for many years called LOGic. I am
> currently upgraded to ver. 9 because it had a
Elecraft has it. Check order page
Sent from my iPhone
...nr4c. bill
> On Feb 26, 2016, at 9:00 AM, Dennis Egan <egan.denni...@gmail.com> wrote:
>
> I think someone out there has a source and part number for a compatible
> 15 pin Y-connector. I need the type where the
Well, no longer a question. The 5 pole 200 is no longer available.
Sent from my iPhone
...nr4c. bill
> On Feb 26, 2016, at 5:03 PM, Gary Smith <g...@ka1j.com> wrote:
>
> Interesting timing for this thread. A friend wants to buy my K3 and
> fit it with the most advantageo
So we need to change the "599" that n1mm put in the log to "enn"?
Sent from my iPhone
...nr4c. bill
> On Feb 22, 2016, at 4:01 PM, Bill Frantz <fra...@pwpconsult.com> wrote:
>
> I hope this message can close the thread.
>
> I asked the ARRL by
? Or the
release notes on the various FW upgrades involved?
Sent from my iPad
...bc nr4c
> On Jan 16, 2016, at 7:02 PM, Jim Davis <nn...@icloud.com> wrote:
>
> Gentlemen,
>
> Can anyone out here EXPLAIN to me the VARIOUS FUNCTIONS/ADVANTAGES of the
> "USB Keyboard
Check the website for mods and I think you'll find that virtually all the
hardware mods and updates can be added to every vintage K3 up to April of 2015
when it was replaced by the K3S.
Sent from my iPad
...bc nr4c
> On Jan 19, 2016, at 10:27 PM, Gary Travis Roberts
> &
What is VFO B mode set to.
Sent from my iPad
...bc nr4c
> On Jan 19, 2016, at 3:24 PM, Ron Spencer <ron.e.spen...@gmail.com> wrote:
>
> Set split on K3. Monitor sub and no rf out. Stop monitoring sub (still
> split) and fine output. Same result on cw. And yes, I've hit a t
My K3S fans are quiet. But I lit up the fan in my KPA500 today running 500
watts running RTTY. But noted that as soon as the fan hit high, the temp
started down. So it works well. Amp did great. Almost 100% return on calls.
Sent from my iPhone
...nr4c. bill
> On Feb 14, 2016, at 10:17
Why on earth would you turn the TX MON up all the way? My front door would be
buzzing with it that loud.
Sent from my iPhone
...nr4c. bill
> On Feb 16, 2016, at 10:14 PM, Jerry Moore <je...@carolinaheli.com> wrote:
>
> Hi, I thought I had the sound issue licked with the lo
ens".
I hope in the end, that you will like your radio as much as I like my
two.
...bill nr4c
On Wed, 17 Feb 2016 16:49:35 -0500, Jerry Moore wrote:
I had someone contact me off list to suggest putting some small bits
of tape
where the cover touches the center stiffener. I did that and now ha
I already suggested the manual. Ye, download it and read it.
Sent from my iPhone
...nr4c. bill
> On Feb 17, 2016, at 5:52 PM, Gary Smith <g...@ka1j.com> wrote:
>
> Fellows, it was just a simple question I asked here so as to not
> bother the techs at Elecraft with wha
Did you move the BNC cable as well?
Sent from my iPhone
...nr4c. bill
> On Feb 19, 2016, at 4:55 PM, Gary Smith <g...@ka1j.com> wrote:
>
> Hi,
>
> I just connected the CBLP3Y cable to the P3 & K3s. The frequency
> shows on the P3 & the SVGA monitor but I se
How about just telling the radio that KRX3 is Not Installed and remove the bad
synth board until it is replaced?
Sent from my iPhone
...nr4c. bill
> On Feb 21, 2016, at 8:23 AM, Bruce Osterberg <n9b...@gmail.com> wrote:
>
> Good Morning:
>
> I called Elecraft Tech. supp
I've Benin logging K & KW but converting att to 100, nn to 99, enn to 599 and
1tt to 100 etc. hope I'm ok?!
Sent from my iPhone
...nr4c. bill
> On Feb 21, 2016, at 4:15 PM, Chester Alderman <alderm...@windstream.net>
> wrote:
>
> OK...but what if you receive 'NN'?
Check:
Antenna selected
VOX?
TEST mode.
Sent from my iPhone
...nr4c. bill
> On Mar 15, 2016, at 2:48 PM, chris grier <chris@blueyonder.co.uk> wrote:
>
> HI I switched on my K3s today and there is no RF coming out of it when I
> press my Key
> I can hear that the
One issue of using KY commands is the Esc key will no longer stop a
transmission.
You cannot use Ctrl "K" to type a message to be sent by n1mm.
Sent from my iPhone
...nr4c. bill
> On Mar 13, 2016, at 4:58 PM, Guy Olinger K2AV <k2av@gmail.com> wrote:
>
>> On
Why not turn NR Off and back On and make adjustments.
Sent from my iPhone
...nr4c. bill
> On Mar 13, 2016, at 5:22 PM, Michael Greb <mich...@thegrebs.com> wrote:
>
> I've wondered the same, only having my kx3 for a few weeks. One
> solution is programming one of the
other QRP sites and all
you need is a tree for a Inverted V. It's also neat to make it an OCF by
taking about 20' off one end and splicing it to the other end. Then when you
put the center over a tree, the feed point is to one side.
Sent from my iPhone
...nr4c. bill
> On Mar 15, 2016, at 12
Your SSB bandwidth (passband) is prob 2.7 kHz and your CW passband might be
400. You not only have to consider the side and but your side tone offset and
bandwidth.
There is a setting in the CONFIG menu to make this work however.
Sent from my iPhone
...nr4c. bill
> On Mar 14, 2016, at 8
It's only a "press 'n hold".
Sent from my iPhone
...nr4c. bill
> On Mar 18, 2016, at 9:06 PM, Jim - N4ST <hamsh...@n4st.com> wrote:
>
> Ron,
>
> I use macros to change mode (USB, CW, PSK, RTTY, etc) and set bandwidths
> and power levels.
>
Most likely an "indexing" feature to insure proper connector alignment.
Sent from my iPhone
...nr4c. bill
> On Mar 30, 2016, at 5:14 PM, "kev...@coho.net" <kev...@coho.net> wrote:
>
> I have successfully removed the KPA3 module and find one pin missing.
Saw a picture of a small "candelabra" socket (RS has them) on a board and a
screw-in soldering element of 40 watts with a screw-in tip (tip removed and the
hole filled with solder). I drilled the threads out of the hole and it
actually worked.
Sent from my iPhone
...nr4c. bill
Factory use only.
Sent from my iPhone
...nr4c. bill
> On Apr 10, 2016, at 4:54 PM, Ron Castro <r...@sonic.net> wrote:
>
> I noticed an RJ-45 connector on the bottom panel of the K3/0 Mini but I
> can't find any documentation about what it's for. Anyone on th
Yes. Set all to 38,400.
The radios seem to be set like the K2 at 4800. This was slow even 15 years ago
when the K2 was new.
Sent from my iPhone
...nr4c. bill
> On Apr 6, 2016, at 9:40 AM, John Pitz <crustac...@brig-elec.com> wrote:
>
> Hello,
>
> I was wondering if th
Use Low gain setting. "FPl Bias".
Sent from my iPhone
...nr4c. bill
> On Mar 26, 2016, at 10:57 AM, Tom <tom...@videotron.ca> wrote:
>
> Hi,
> The MIC SEL is front panel, Hi Bias. I have tried all combinations too.
> Tom
>
> -Original Message- Fr
I believe most AM stations are on rather coarse spacing.
Sent from my iPhone
...nr4c. bill
> On Mar 7, 2016, at 9:43 PM, herr42 <her...@comcast.net> wrote:
>
>
>
> Ok I will rephrase. Why is the min crs tuning step 1khz? Other modes allow
> .5 .1
>
>
>
Link doesn't work for me.
Sent from my iPhone
...nr4c. bill
> On Mar 6, 2016, at 12:03 AM, Clay Autery <caut...@montac.com> wrote:
>
> Not to open a can-o-worms again, but just closing the loop here. A while
> back, I asked for help IDing the pins used on the pigtails sold
Unplug PTT, KEY, and PADDLES and check. You have what sounds like multiple PTT
set up.
Sent from my iPhone
...nr4c. bill
> On Mar 5, 2016, at 9:11 AM, Peter Chamalian <w...@comcast.net> wrote:
>
> When using the K3 on SSB with a condenser mike I am occasionally getting an
I've noticed that the first time I TX with my KPA500 it will fault. Seems to
settle down after that. May also spoke after band change.
Sent from my iPhone
...nr4c. bill
> On Mar 1, 2016, at 12:23 AM, Vic Rosenthal <k2vco@gmail.com> wrote:
>
> Hi john,
> I think I've s
It's on the web site. But the P3 is the same height and depth as the K3.
Sent from my iPhone
...nr4c. bill
> On Apr 2, 2016, at 2:16 PM, Mike Dodd <m...@mdodd.com> wrote:
>
> While eagerly awaiting delivery of my K3s kit on Tuesday, I built a cardboard
> mockup of it and
I put both cables in at build time. Unused one is routed into the shielded area
and secured to the shield.
Easy to re-configure. Take off top and change cables. A pair of surgical clamps
may be useful.
Sent from my iPhone
...nr4c. bill
> On Apr 1, 2016, at 1:56 PM, Sverre Holm (LA3ZA)
remember why I was inside the case but Easy fix.
Sent from my iPhone
...nr4c. bill
> On Apr 4, 2016, at 10:41 PM, pastor...@verizon.net wrote:
>
> Good Evening,
> This is mark griffin, KB3Z. I forgot to write the message in text. Here we go
> again!!! I installed my KD
Yes. It has one.
Sent from my iPhone
...nr4c. bill
> On Apr 4, 2016, at 9:03 PM, pastor...@verizon.net wrote:
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: h
or Unit ID.
Sent from my iPhone
...nr4c. bill
> On Mar 29, 2016, at 4:41 PM, Esquer Dave <dave.esq...@gmail.com> wrote:
>
> Hi folks,
> I know this has been asked and discussed before but I can’t seem to get a
> handle on a clear-cut answer …
>
> I am going to do
Yes, indeed it was the "Lady Lex".
Sent from my iPhone
...nr4c. bill
> On Mar 30, 2016, at 8:34 AM, Jim Finan <jimfi...@att.net> wrote:
>
> I believe that was the 'Lexington'
>
> Jim Finan
> AB4AC
> Sent from my BlackBerry 10 smartphone.
> Original
So what is the problem? The company owners (designers) frequently answer
questions here. There is no better source for help than here.
Sent from my iPhone
...nr4c. bill
> On Mar 29, 2016, at 9:12 PM, "kev...@coho.net" <kev...@coho.net> wrote:
>
> Thanks. I read th
Actually there is a section in the manual. But most people just ask here. A lot
easier than reading a book.
Sent from my iPhone
...nr4c. bill
> On Mar 29, 2016, at 7:23 PM, "kev...@coho.net" <kev...@coho.net> wrote:
>
> Is there a trouble shooting manual for the
Hmmm. A 100 Watt KX3 isn't that far from the price of a 100 Watt K3S.
Sent from my iPhone
...nr4c. bill
> On Apr 26, 2016, at 8:28 PM, Bill Frantz <fra...@pwpconsult.com> wrote:
>
> I think it is better to compare the IC-7300 with the KX3 rather than the
> K3
Several questions:
What mic?
Correct plug?
Which socket?
What are Mic settings?
Have read and understand the mic setting in the manual?
Sent from my iPhone
...nr4c. bill
> On Apr 30, 2016, at 6:09 PM, Andrew Hebden <and...@ahebden.com> wrote:
>
> Hi,
> I have completed
If you're saying "with both VFOs on same freq, the P3 doesn't show the red band
indicating that VFO B is the TX freq. " that's normal. Since both are on same
freq the VFO B cursor is hidden behind the green VFO A cursor.
But I may have misread your post.
Sent from my iPhone
...
Well if you look at the sound devices you should see a USB CODEK as a
record/playback device. That's it.
Sent from my iPhone
...nr4c. bill
> On May 20, 2016, at 7:29 PM, Ken Arck <k...@arcomcontrollers.com> wrote:
>
> I can't seem to find anything in the manual about thi
Are you using the Power switch on the radio or by chance turning OFF the
power-supply?
Sent from my iPhone
...nr4c. bill
> On May 23, 2016, at 2:33 AM, danny.higgins <danny.higg...@keme.co.uk> wrote:
>
> WSJT not running – K3S not connected to PC. I still need to reset P
Where is fldigi software located on your computer? You must have Write
privileges to save the CONFIG files.
Sent from my iPhone
...nr4c. bill
> On May 23, 2016, at 5:13 PM, Paul Christensen <w...@arrl.net> wrote:
>
> Dave,
>
> Correct. I must always initialize Fld
I believe it will sense RF on a dit or two. So only the coax is required.
Sent from my iPhone
...nr4c. bill
> On May 19, 2016, at 11:06 AM, Michael Blake <k9...@mac.com> wrote:
>
> Which data connection(s) do I use to control the band/frequency settings on
> the KAT500 wh
Or just use the Voltage reading displayed on the K3/KX3 front panel. It's quite
accurate.
Sent from my iPhone
...nr4c. bill
> On May 22, 2016, at 10:52 AM, David Orman <orma...@corenode.com> wrote:
>
> Another question - how long/what gauge is the wire running to your KXPA10
As to the ATU in the KX2, 7K/7C is the same range as the KX1, T1 and I think
the K2 ATU.
Comparisons with KX1 make sense but how bout a small pocket sized "next step"
to the K2?
Sent from my iPhone
...nr4c. bill
> On May 23, 2016, at 10:56 PM, Phil Wheeler <w...@soc
The end-view on page 5 of the manual is called out as the standard Elecraft 5.5
X2.1 mm coaxial power connector with positive center pin.
Sent from my iPhone
...nr4c. bill
> On May 24, 2016, at 12:07 PM, Bruce Nourish <w0...@w0mbt.net> wrote:
>
> Hi folks,
>
>> Fr
You have not missed anything. I had hoped this would get to the top of the
list.
Sent from my iPhone
...nr4c. bill
> On May 21, 2016, at 10:40 AM, Fred Moore <wd8...@gmail.com> wrote:
>
> I don't see a reference to setting the receive eq via a macro, I do see
> a re
Web site. Usually 2-3 days I think.
Sent from my iPhone
...nr4c. bill
> On May 21, 2016, at 8:21 AM, Renze VE6DC <ve...@xplornet.ca> wrote:
>
> Does anyone know the lead-time for a factory built KX3 from ordering to
> shipping?
&
Note that eq settings for SSB and CW are saved separately.
Sent from my iPhone
...nr4c. bill
> On May 21, 2016, at 11:11 AM, Fred Moore <wd8...@gmail.com> wrote:
>
> Well, that really sucks when you are moving between cw and other modes.. oh
> well, hopefully it will
Yes. You have a BNC antenna jack labeled REC ANT I believe. Use it for REC
antenna. It is disabled while transmitting and is not in the TX path so you
can't hurt anything. It is located on rear of radio and is most left of the
bank of 5 below the audio jacks.
Sent from my iPhone
...nr4c. bill
It's a lot more than a "knob"! More like a "key-pad" with a Knob.
Sent from my iPhone
...nr4c. bill
> On May 21, 2016, at 4:57 PM, Ken G Kopp <kengk...@gmail.com> wrote:
>
> I'm sure Elecraft has a very valid reason for naming the thing as they
>
CW Paddles. KX3PD.
Sent from my iPhone
...nr4c. bill
> On May 11, 2016, at 7:58 AM, Jim Rodenkirch <rodenkirch_...@msn.com> wrote:
>
> OK - what is that 4 pin thingy for?
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.n
Be sure if try to test before putting the KRX3 back in that you check the KRX3
install directions and replace the small jumper in the socket where the rear
"extender" board goes. Else the radio won't turn on
Sent from my iPhone
...nr4c. bill
> On May 16, 2016, at 4:39 PM, N2T
What effect do you expect when transmitting? I would think "nothing" since NB
is a Receive function.
Sent from my iPhone
...nr4c. bill
> On May 15, 2016, at 6:43 PM, David Anderson via Elecraft
> <elecraft@mailman.qth.net> wrote:
>
> Hmmm, those NB lette
What baud rate is your radio set to? If you have it set to 38,400, rotate the
knob one more notch until it says USB.
Sent from my iPhone
...nr4c. bill
> On May 13, 2016, at 6:10 PM, stengrevics <jstengrev...@comcast.net> wrote:
>
> I am trying to do the TX Gain Calibration
I suppose. But the monitor is what most users wanted in the beginning and more
recent features weren't even in their dreams when the manual was written
Sent from my iPhone
...nr4c. bill
> On May 15, 2016, at 10:21 AM, Bill <w2...@nycap.rr.com> wrote:
>
> Never mind - got help
Set L3 to USB not 38400.
Sent from my iPhone
...nr4c. bill
> On May 6, 2016, at 9:34 PM, Steve Ward <stevew...@gmail.com> wrote:
>
> Hi all, so I just got back in town last night, and I wanted to get my new
> KIO3B installed in s/n 1544 so I could give it a run during 7QP.
I don't think the "bypass" in the KAT3 is a true bypass. It sets a "solution"
which should be equivalent to a bypass.
The new KAT3a has a true "bypass" relay.
Sent from my iPhone
...nr4c. bill
> On May 6, 2016, at 11:50 AM, Ramon Tristani <r.tris
Utility/configuration
Sent from my iPhone
...nr4c. bill
> On May 1, 2016, at 11:53 AM, Ron Reis <nthdegree...@gmail.com> wrote:
>
> Can't seem to find out how to change the power-on message in the manual.
> Hints?
>
NO. FOR GOOD REASON.
Sent from my iPhone
...nr4c. bill
> On Apr 15, 2016, at 7:12 PM, Merle Bone <merleb...@charter.net> wrote:
>
> I tried to load my current K3 configuration into my new K3S and got an
> error message saying the serial number did not match. Is there
How about a "Splitter" used backwards?
Sent from my iPhone
...nr4c. bill
> On Apr 15, 2016, at 1:26 PM, HankP <pfizenma...@q.com> wrote:
>
> I do this too - BUT have not figured a way to record the SUB rx output at
> same time unless I made some sort of extern
You need to do the 70 watt cal with at lest 14 volts at amp power pole. And use
biggest and shortest cable to minimize losses. Same power setup for operation.
Sent from my iPhone
...nr4c. bill
> On Apr 16, 2016, at 8:29 PM, Tom Field <docw...@gmail.com> wrote:
>
> I'm ha
Dagnabbit! The photo got stripped!
Sent from my iPhone
...nr4c. bill
> On Apr 16, 2016, at 3:45 PM, Nr4c <n...@widomaker.com> wrote:
>
> Both front PTT(in mic connector) and rear Phono jack are in parallel.
>
> I use either VOX (for contesting) and a home-ma
made on my 3D printer.
Sent from my iPhone
...nr4c. bill
> On Apr 15, 2016, at 11:34 PM, Mike Walkington <mike.walking...@gmail.com>
> wrote:
>
>
> All,
>
> At the risk of this request being lost in the euphoric response to the K3
> K-Pod. I'm wondering
The manual describes a "Fan test procedure" to run the fans at each speed to
make sure they are working. You can also use this to set the fans to a speed if
you are working in a warm room or outdoors in sun and running high power and
find the radio unusually hot.
Sent from my iPho
Download the manual.
Sent from my iPhone
...nr4c. bill
> On Apr 16, 2016, at 12:07 PM, Richard W Hemingway <rhemi...@sbcglobal.net>
> wrote:
>
> Hi,
> I am wondering which of the pins I should use to allow the P3 turn on when
> the K3s is turned on: Power Control
This is not AGSK A mode. It is FSK D.
Sent from my iPhone
...nr4c. bill
> On Apr 17, 2016, at 9:38 AM, Triconet_2 <wes_n...@triconet.org> wrote:
>
> You and at least two dozen guys I logged doing something similar And I would
> venture to guess that most of them were ru
Forgetaboutit !
Sent from my iPhone
...nr4c. bill
> On May 8, 2016, at 4:55 PM, Erlend Grimseid <egrims...@gmail.com> wrote:
>
> Make that an 2p4s battery pack and it would be on my shopping list. I have
> made an pack of 2x4 lifepo4 aa cells, external of course. I have used
No issue with mine using "|".
Sent from my iPhone
...nr4c. bill
> On May 25, 2016, at 10:46 AM, Jim Sheldon <w...@cox.net> wrote:
>
> Further checks on this - I reloaded the old FW back to Beta 5.35 and the
> problem existed in that one so I loaded the cur
They're kind of spread out so I don't thinking makes much difference.
Download the various assembly manuals and see if there are two or more that
need common panels/parts unassembled and do those at the same time.
Sent from my iPhone
...nr4c. bill
> On Jul 14, 2016, at 4:10 PM, Bria
You're a bit late. So far, after a year there hasn't been a run on these nor
any use other than dis-assembly practice for SMD components.
Sent from my iPhone
...nr4c. bill
> On Jul 23, 2016, at 6:12 PM, Larry P. Greenberg <wa9...@ameritech.net> wrote:
>
> I recently u
Yes. You select the radio's audio codec as the sound device. All cat and
laying/PTT functions are also available.
Sent from my iPhone
...nr4c. bill
> On Aug 1, 2016, at 12:46 AM, James Bennett <w6...@me.com> wrote:
>
> Folks,
>
> I have a mid-2010 vintage K3 and more
Buy some of the "2D " blocks from Elecraft and have Front Panel Express to
make the panels for you from your design.
Sent from my iPhone
...nr4c. bill
> On Aug 1, 2016, at 9:56 AM, Dr. William J. Schmidt, II <b...@wjschmidt.com>
> wrote:
>
> The question of Ele
FSK is not available on the Standard RS232 or KUSB single cable either. Needs
extra Comm port.
Sent from my iPhone
...nr4c. bill
> On Aug 1, 2016, at 10:38 AM, Joe Subich, W4TV <li...@subich.com> wrote:
>
>
> > All cat and laying/PTT functions are also available.
>
Check KXPA100 manual online for wiring diagram of KXUSB cable.
Sent from my iPhone
...nr4c. bill
> On Aug 3, 2016, at 5:18 PM, Pete Jones <p...@g0vhl.net> wrote:
>
> I am using an FTDI cable (not Elecraft KXUSB). Windows 10 recognises it and
> the FTDI driver is installe
Yes. Check the manual(s) on KXPA100 and ATU.
Sent from my iPhone
...nr4c. bill
> On Aug 4, 2016, at 1:13 AM, David F. Reed <w5sv.d...@gmail.com> wrote:
>
> Looking for a little QRO in my alternate station...
>
> I would like to be able to run my KX3 into
Check your connections are as shown in manual. Be sure baud rates are 38400.
Sent from my iPhone
...nr4c. bill
> On Aug 3, 2016, at 7:16 AM, <w5...@comcast.net> <w5...@comcast.net> wrote:
>
> color me stupid, but for the life of me I can't figure out how to get my
Set it and forget it. No need to watch constantly
Sent from my iPhone
...nr4c. bill
> On Aug 12, 2016, at 10:02 PM, James Bennett <w6...@me.com> wrote:
>
> OK - I’m officially stumped. How does one keep the meter display showing ALC
> continuously instead of RF outp
Did you turn ON the Mon and set level high enough?
Sent from my iPhone
...nr4c. bill
> On Aug 13, 2016, at 7:34 AM, Jorge Diez - CX6VM <cx6vm.jo...@gmail.com> wrote:
>
> hello
>
> i am trying to record audio from K3
>
> I have a stereo cable connected from K3 L
Put volume control in phone line.
Sent from my iPhone
...nr4c. bill
> On Aug 13, 2016, at 6:01 PM, Jorge Diez - CX6VM <cx6vm.jo...@gmail.com> wrote:
>
> increasing monitor is good for recording my audio.
>
> But need to be very high, not good to operate and worst
Which mic jack is selected, front or rear?
Sent from my iPhone
...nr4c. bill
On Aug 10, 2016, at 7:11 PM, Sid Frissell <sidfriss...@gmail.com> wrote:
>> Help! I seem to have created a problem for myself (something I do more
>> often each year!). While trying to set
No. And, the KAT should be running when you turn on the K3(S). Mine stays on
all the time.
Sent from my iPhone
...nr4c. bill
> On Jul 13, 2016, at 5:10 PM, Jerry <w...@jetbroadband.com> wrote:
>
> Greetings all,
>
>
>
> Is it possible to be able to power on
fun projects.
I am looking at a PC board and maybe kits for this interface. Stay tuned.
Sent from my iPhone
...nr4c. bill
> On Jul 20, 2016, at 12:22 PM, Ron Mudry <r...@mudry.us> wrote:
>
> Bill,
>
> I just saw you post to the KX# user group, below.
>
> I’m
201 - 300 of 1160 matches
Mail list logo
