on learning how to use a DSP radio
and all the other settings.
Now have it set for a peak around 800 Hz for CW (i.e. the same as the
sidetone of my liking), and I'm experimenting the pink-noise setup that
someone else recommended for SSB.
--
Pierfrancesco Caci, ik5pvx
, and 50 MHz. I
Pete could not
Pete find confirmation of this in either the manual or the Cady
Pete book, but it
Pete makes sense to me. Can anyone confirm it?
Page 4 of the schematics. The 40 m one also serves for those lucky enough
to have a 60 m allocation.
--
Pierfrancesco
This list hosted by: http://www.qsl.net
Rick Please help support this email list: http://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
that he will remove the switch.
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Help: http://mailman.qth.net/mmfaq.htm
Peter Post: mailto:Elecraft@mailman.qth.net
Peter This list hosted by: http://www.qsl.net
Peter Please help support this email list: http://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
that I want to listen to
some volmet or similar). The KXV3A is an obligatory step if you want to
give yourself the P3, or even just to add the PR6 if you like the 6m
band.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home
it recently and it has become so
natural using it that I give it for granted. Definitely an useful add
on, not just for contests, but for general dx too.
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net
local or direct
Kevin from Elecraft.
I would also like to add that any reseller in Europe must provide 2
years warranty, instead of the 1 year that Elecraft provide, and they
must be able to recover that cost somewhere.
--
Pierfrancesco Caci, ik5pvx
. If this feature is already there and I somehow
missed it, feel free to beat me senseless :-)
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
. Maybe the KX3 can do that as well? Remember to set it back to
AUTO :)
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
switch from looking at a 3 kHz waterfall
down to a single psk signal with just 3 presses of that button).
What about long hold (more than 3 seconds)? I think long hold is already
used somewhere else in the firmware, so the function to recognize it is
already there.
Pf
--
Pierfrancesco Caci, ik5pvx
What's the maximum safe temperature for the front panel?
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
support this email list:
http://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
without recording anything.
KU4AF John, KU4AF
KU4AF Pittsboro, NC
KU4AF Pierfrancesco Caci wrote
Many thanks for this nice example. Now, I would like to free up M4-HOLD,
but I can't find anywhere in the manuals how to delete a macro
assignment from one
the serial one :-)
That said, someone in the past posted that he used 2 semi-rigid cables
and placed it under the K3 which he keeps tilted.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
desk position and putting it back
with all the right cables in the right place ;-)
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
test
Wayne but may be of interest to operators as well.
Will you please make this available on the K3 as well, at some point?
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
when using DISP?
Pf
--
Pierfrancesco Caci
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
difficult to use. At least it is for me, both for CW (I
have no problem admitting I suck at it and I need a decoder) and for the
built in digimodes. I'd love to be able to get on the air with just the
radio and a piece of paper and pencil, for a change.
Pf
--
Pierfrancesco Caci, ik5pvx
Robert == Robert G Strickland rc...@verizon.net writes:
Robert Are schematics available for Elecraft products? Thanks.
Robert ...robert
http://www.elecraft.com/K2_Manual_Download_Page.htm
--
Pierfrancesco Caci, ik5pvx
Jim Sheldon w...@cox.net wrote:
Since I don't have a hand key connected to the K3, I put it in data
mode and hit the XMIT button to produce a carrier for tune. It
Any particular reason for not using the TUNE function with this setup?
--
Pierfrancesco Caci
/mailman/listinfo/elecraft
David Help: http://mailman.qth.net/mmfaq.htm
David Post: mailto:Elecraft@mailman.qth.net
David This list hosted by: http://www.qsl.net
David Please help support this email list: http://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Hold XMIT to access the TUNE function which works at this preset level he's
talking about. This is NOT the same as pressing or holding ATU
--
Pierfrancesco Caci
screen with several freq/mode
Mike selections for each band so I could just one click to any
Mike band/mode desired. 73 Mike
fldigi does that.
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net
david == david Moes dm...@nexicom.net writes:
david On 11/11/2012 11:09 AM, Pierfrancesco Caci wrote:
Mike == Mike Greenway k...@bellsouth.net writes:
Mike I quite often use a spot on my packet spots to just change
Mike band/modes. Often there is nothing in the spot
= 1.12.9.22 (linux)
Are the other modules loaded correctly? FPF = 1.15, DSP = 2.80
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
--
Pierfrancesco Caci
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
://mailman.qth.net/mmfaq.htm
Wayne Post: mailto:Elecraft@mailman.qth.net
Wayne This list hosted by: http://www.qsl.net
Wayne Please help support this email list: http://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing
How good is the K144XV at keeping a signal 12.5 kHz away, from someone
just a few km nearby, under control?
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
(hfwnotes.rtf), look for the notes about MCU 3.57 / DSP
2.45, 11-7-2009 in that file.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
of
AD6XY the transverter.
isn't that what the QSK button (long press on BAND-up) is for?
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
.
--
Pierfrancesco Caci
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
of the manual,
AUTOINF entry of the config menu).
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
- be greatly appreciated.
They're all here:
http://www.w1hkj.com/xmlarchives.html
download the one you need and put it in the rigs directory
(~/.fldigi/rigs/ on Linux)
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
/donate.html
I've noticed this when B is not on same band as A. Try A-B and recall your
memory again
--
Pierfrancesco Caci
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
will report 'a0', which
means the alarm has been deactivated. Am I misunderstanding the manual?
Thanks
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
you turn it off.
Many thanks Vic, I can see that Alarm is saved to eprom. I didn't notice
this during previous tests.
I guess fixing the manual is easier than fixing the code ;-)
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing
Anyone with a KUSB using it with linux out there? Can you show me the
output of 'sudo lsusb -v' please? I'm specifically interested to know if
the iManufacturer, iProduct and iSerial fields are set to something
useful.
Thanks
Pf, ik5pvx
--
Pierfrancesco Caci
/10 and get the filters/preamp
instead of the k3/100 without the options, if it would give me better
results.
I'll appreciate your suggestions
Pf, ik5pvx
--
Pierfrancesco Caci
__
Elecraft mailing list
Home: http://mailman.qth.net
a cg3000, so the main reason I was thinking about the ATU is
the second antenna input.
Wes start. Add one narrow filter as money permits and go from
Wes there.
I have a few days more to ponder this before my travel. Thank you and
all the other who answered so far.
Pf
--
Pierfrancesco
be the size of the hole, right?
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
is now metric, but for small
Don hardware, the US sizes predominate here. We have to keep two
Don sets of wrenches if we are to have a complete set.
Don 73, Don W3FPR
Don On 4/9/2011 1:51 AM, Pierfrancesco Caci wrote:
Hello, while lenght of the screws is given in the manual
Is it normal that the hole for VFO B didn't have the paint masked on the
back of the front panel (like it is for vfo A) ?
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Let me gloat just a little bit :-)
http://www.tippete.net/foto/Radio/K3/slide_153.html
took me about 15 hours, working slowly, frequently distracted by kid and
cat... now, to make room on the desk and learn to use it.
--
Pierfrancesco Caci, ik5pvx
Hello,
If I use memories 0-9 as quick band access, can they still be used as
band edges for scan?
Did anyone get around writing something to dump/restore memory content
under linux ?
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft
and read the VFOs?
Hello,
If I use memories 0-9 as quick band access, can they
still be used as band edges for scan?
Did anyone get around writing something to
dump/restore memory content under linux ?
--
Pierfrancesco Caci, ik5pvx
--^REV released
K3 software as follows:
DTBL0014.HEX
haux0271.hex
hdsp0271.hex
hfpf0114.hex
hmcu0425.hex
tboot8.hex
Also, what would be the difference between AI2 and AI3?
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home
be set to
ignore the unwanted rs232 signal.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
?
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
.
Thanks
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
, I really need to put that antenna back up and get to actually
use the new radio I have, instead of playing with memories and remote
control g
Pf
--
Pierfrancesco Caci, ik5pvx p...@tippete.net
__
Elecraft mailing list
Home: http
that is in the
memory ?
Both of these are true.
Thanks.
So the only way to recall a memory that contains band limits for scan
purposes, and be sure you get what you want, is:
M-V, select the memory of interest, M-V, A-B, M-V, M-V.
Correct?
Pf
--
Pierfrancesco Caci, ik5pvx p...@tippete.net
://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
(640x480@60Hz, maybe) if the monitor is disconnected when
the system starts. Or it may fail to start at all, you have to test that
to see what your OS does.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http
:
Wayne http://mailman.qth.net/mmfaq.htm Post:
Wayne mailto:Elecraft@mailman.qth.net
Wayne This list hosted by: http://www.qsl.net Please help support
Wayne this email list: http://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
Is there a way to have the decoded text persist longer on the display?
it returns too quickly to showing vfoB frequency.
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Dick == Dick Dievendorff die...@comcast.net writes:
Dick There is a terminal tab on the K3 Utility that might help.
Dick Dick, K6KR
I thought of that, but it would interfere with the logging program.
Pf
--
Pierfrancesco Caci, ik5pvx
)
.radio.elecraft.K1-KX1/
:0:
* $ LISTID ?? .*elecraft\\.mailman\\.qth\\.net
.radio.elecraft/
--
Pierfrancesco Caci, ik5pvx p...@tippete.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
with this radio (Windows-like), but I still
SM6CKU enjoy it :-)
Do you power it off from the front panel? Not windows, but the firmware
of this radio wants to be properly shut down, don't just yank the power
plug :-)
Pf
--
Pierfrancesco Caci, ik5pvx
Anyone able to use the trick described in the first exercise at page 62?
It seems to work until you hold [DUAL PB] again, at that point the last
CONFIG:DUAL PB selection sticks.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing
and kid
interruptions :-)
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
things that can
be shown instead of the clock are explained on page 36 of the manual.
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
? And also a standalone html or pdf copy of the help file,
pointing the browser to the Help directory gives a lot of broken links.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
of course. This spurious signals fades if I raise AGC
SLP, or if I reduce LIN OUT. For SLP = 2 (instead of the default of 12),
I need to reduce LIN OUT to 4 (instead of the default of 10).
I'd like to hear what's your experience with these settings.
Pf
--
Pierfrancesco Caci, ik5pvx
, it involves
some additional circuitry, and is described in the help pages of fldigi,
but in the end the audio keying works fine.
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
could even do those two in sequence, and just test them together.
I'd then go on with the filters (which require access to the front part
of the bottom), and then proceed with either the KXV3A or the KDVR3,
which both require extensive dismount/remount.
Any better ideas?
Pf
--
Pierfrancesco
recover without error. It couldn't be otherwise; there's no way to
You have to admit though that a smartphone has a bit more memory and a
generally more powerful cpu than your radio...
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
.
I built my K3 using a new Philips #1 (PH1) and it fit all the screws.
Do not confuse with PZ series, the difference is subtle.
--
Pierfrancesco Caci
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
the same error. I'd tend to rule out the
dummy load as the culprit.
Ideas?
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
?
73,
Don W3FPR
On 2/12/2012 11:22 AM, Pierfrancesco Caci wrote:
I get the following error when trying the 1 mW calibration for a
freshly
installed KXV3A:
Starting 1 milliwatt calibration.
Calibrating at 1.900 MHz
IsSamplingComplete: Unexpected
if the scope has a 1 Mohm input, it has considerable capacitance,
Don so yes, you need a 10X probe.
Don is needed to display the proper amplitude of an RF voltage.
Don 73,
Don Don W3FPR
Don On 2/12/2012 1:52 PM, Pierfrancesco Caci wrote:
Thanks for this info. Now, please
This list hosted by: http://www.qsl.net
Fausto Please help support this email list: http://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
a PCM slider, which is a bit weird. I have not
yet tried to hook it up to the radio.
Jim, how do you set the little volume control?
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
looking for
suggestions, or better yet pictures.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Jim == Jim Brown j...@audiosystemsgroup.com writes:
Jim On 3/24/2012 1:19 PM, Pierfrancesco Caci wrote:
Jim, how do you set the little volume control?
Jim I've never found a gain control for Record. :) There are two inputs
--
I was talking about the rotary control on the side
level.
Adrian These guys seem to think its proof the 590 outperforms the K3,
Adrian but I don't think it's a fair test. Comments?
The preamplifier on 40 m?
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http
Bill == Bill W4ZV btipp...@alum.mit.edu writes:
Bill Pierfrancesco Caci wrote
Pulling out the K3 is sort of doable, but putting it back in
position is a real pain.
Bill This mirror image of the rear panel may help:
Bill http://www.n5na.net/download
://www.qsl.net/donate.html
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
observed this issue ?
DL5OCD I use 4.60 FW, SMTR MD set to abs.
Yes, noticed the same a couple days ago when running the s-meter
calibration in absolute mode. Using 4.61 here.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing
this email list: http://www.qsl.net/donate.html
Any particular reason why it is so? It still looks like a (very minor,
cosmetic as cisco like to call them) bug
Pf
--
Pierfrancesco Caci
__
Elecraft mailing list
Home: http://mailman.qth.net
/donate.html
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
the RF calibrate with the XG3, is it recommended to put the RF Gain
control at full gain (this is what I presently do), or leave the RF
Gain control at 3:00?
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http
blocked.
Ian Is this a configuration error on my part, or a firmware bug?
wouldn't you get microphone audio mixed with the CW tone if you'd allow
PTT to work?
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http
that signal is barely audible with no APF
RX Audio EQ bands 4 and 5 set to 0, all rest down -6
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Ron -Original Message-
Ron From: elecraft-boun...@mailman.qth.net
Ron [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Pierfrancesco
Caci
Ron Sent: Sunday, May 12, 2013 1:25 AM
Ron To: elecraft@mailman.qth.net
Ron Subject: [Elecraft] [K3] APF and Pitch
Ron
for the Linux version of the utility as well?
thanks
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
.
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
W on tap and to 100 W on
hold.
Pf
--
Pierfrancesco Caci, ik5pvx p...@tippete.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
some of the other tools
(e.g. the one to upgrade the firmware to the 2m internal transverter)
are windows only too.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
be nice if you could run a compile for 64 bit.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
://www.tippete.net/radio/k3mem
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
, up to end of
line).
It's placeholder for me to remember where to put a command to write the
label if/when a way to do so will ever get published.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net
that
you need to do MV, A=B, MV again to get both VFOs on the same band.
--
Pierfrancesco Caci, ik5pvx p...@tippete.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
that have a line boost function, those generate hash
even when AC is present if the mains are below a certain (usually
settable) treshold. For example mine was set to boost when input was
below 208 V.
Pf
--
Pierfrancesco Caci, ik5pvx
the front panel leds
flashing) and then makes a pop on the speakers.
#5305 built in april 2011, fw 4.39
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
--
Pierfrancesco Caci
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
bias
MIC = 12
CMP = 22
VOX GN = 013
ANTIVOX = 008
With these settings, I get a loud feedback whistle if I have the
speakers turned on. Raising antivox doesn't seem to help, lowering vox
gain much below 10 cuts my first syllables.
Thanks
Pf
--
Pierfrancesco Caci, ik5pvx
no whistle unless I put the microphone right in
front of the external speakers.
Thanks Don!
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
, but the internal logger of
fldigi allows for date range selection, so doing it monthly is not an
issue.
Pf
--
Pierfrancesco Caci, ik5pvx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
1 - 100 of 140 matches
Mail list logo