:13 AM Jim Brown
wrote:
> On 6/24/2021 6:48 AM, Tim Tucker wrote:
> > Downward Expander is the most valuable,
>
> That can reduce room noise you transmit in a noisy shack, especially if
> you've set compression too high, or work too far from your mic. Using a
> boom mic he
Jim Brown wrote:
> On 6/23/2021 11:57 AM, Tim Tucker wrote:
> > the other features the EQPlus brings to the table are hard to beat.
>
> Like what?
>
> 73, Jim K9YC
> __
> Elecraft mailing list
> Home: http://ma
If anyone needs the external 6m preamp for an original K3, I have one I
would part with for a reasonable price.
Tim,
AE6LX
On Mon, May 24, 2021 at 7:33 AM Linda M wrote:
>
> __
> Elecraft mailing list
> Home:
I just received the K3 AUX cable for the KPA1500. The manual makes
references to needing K3 MCU 5.93 or later for some of the features. But
the latest MCU available on the Elecraft website is 5.67...I even checked
the FTP for beta versions. Does anyone have any insight on where to obtain
this
After playing with it this evening, I can confirm everything is working as
intended. Typos happen...no biggie
On Fri, Mar 26, 2021 at 7:47 PM Wayne Burdick wrote:
> Typo. Should have said 5.63, I believe.
>
> Wayne
> N6KR
>
>
> > On Mar 26, 2021, at 6:01 PM, Tim Tucke
Subject asks the question...will it work by selecting the K3S as the rig?
Has anyone who owns one try this yet?
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
__
Elecraft mailing list
Home:
Since noone has actually answered the specific question...
A few years ago, I was told by the Owner of Chamelon that the CHA
Hybrid-Micro used in that kit as the base & matching unit is 5:1 Unun. The
manual of the kit has an SWR plot for various types of radiating
elements that can be used: the
Mine does that too. What works for me is to tweak the mic gain up and then
back to the same level and it starts working normally. Seems to me like
there is a firmware bug with the radio that hasn't been figured out and
addressed yet.
Tim
On Sun, Feb 28, 2021 at 6:08 PM Brian Hunt wrote:
>
Using FT8 with the KX3 is pretty simple. I've used it with both the
standard USB and USB DATA A mode. Hook it up just like any other digital
mode, adjust the volume on the rig and level out on the PC, look at the
meter settings in the software and make contacts.
Don't make it more complicated
I looked yesterday at JTDX and didn't see K4 in the rig list. I
am apparently blind, because there it is :)
On Wed, Apr 7, 2021 at 12:49 PM Paul Van Dyke
wrote:
> Andy
> Yes, but Before I left on my business trip the K4 designation was not
> there yet. But it worked fine with a K3S..
>
Adjusting the AGC threshold and slope on my K3 to my liking made all the
difference for me. I did the same on the KX3 and KX2, as well.
Tim
On Wed, Feb 17, 2021 at 11:21 AM Don Wilhelm wrote:
> Mike and Brett,
>
> Go to my webpage www.w3fpr.com and scroll the left column to the "Noisy
> K3"
W2IHY has switch box solutions that should do the trick.
Tim
On Thu, Feb 4, 2021 at 11:57 AM Lou W0FK wrote:
> NJ8M wrote
> >> Ideally, I could turn off the K3S, switch the feedline from the K3S to
> >> the
> >> 101ZD, and have use of both the tuner and amp. Is there an easy way to
> >> do
>
Another example of why having USB-C output on the K4 would be extremely
beneficial. One USB-C cable to the external screen would supply not only
video and power, but could enable touch screen capabilities, allowing the
user to control the rig from the much larger screen if desired. I'm not
sure
Contact Elecraft directly and send a copy of your MARS license. I did MARS
for several years and never had a problem getting the mod apps for Elecraft
gear. They even used my feedback on the frequency ranges to ensure that the
radios were usable on the necessary frequencies.
Tim
On Wed, Aug 11,
If the ask of the electrician was to change the 110v outlet to 240v, his
response will be - you can't do that. If the request was to add/pull in a
new 240v circuit, he will be able to do that assuming your existing panel
supports adding the circuit.
Tim
On Thu, Aug 5, 2021 at 9:46 AM Louandzip
Yes.
On Mon, Jan 3, 2022 at 8:30 AM Larry Boekeloo wrote:
> Do most of you leave your KPA-1500 Power Supply powered up all the time
> even with the RF Deck off?
>
> Thanks.
>
> Larry, KN8N
> Kalamazoo, Michigan
> __
> Elecraft mailing
If you're just going to use WSJT-X (or JTDX, which is what I use) for
non-contest / casual operation on the main FT8 frequencies, I don't think
using the split/fake-it option is necessary. Contesting is a different
thing. To get started with casual use, just use the TX/RX split option on
the
While I own both the KX2 and KX3, when I was trying to work HD8R on 40m
with an Inverted V in the early evening here in SoCal on FT8, there was a
HGE pileup. In my case, the K3 (upgraded to K3S) with the KPA1500 was
the trick. It took me an hour and a KW, but I finally got through. So I
Can you post a picture of the signal?
On Tue, Jul 20, 2021 at 2:35 PM Fred Jensen wrote:
> 1. Is this list still active? Seems like ages since I've seen any
> activity. Wonder if foothill.net has it blocked?
>
> 2. I have a strange noise on 80. It consists of what appears on the P3
> to be
I just got the K4D up and running. This morning I tuned to the local AM
broadcast station I listen to, which often has an annoying tone right on
frequency (The K3S heard it, too). With the K3, I would just manually
notch it out. With the K4, I turn on manual notch, spin the notch
frequency
This is a listing for W6KLE, a local ham not on this list. He would like
to sell his very nice K2/100 that was built by Don Wilhelm. It is 10m-80m
with the auto tuner, DSP, and all the manuals. I have used this rig and it
is in perfect working condition. He's asking $1400. Contact me off list
Are you referring to the original non amplified D104? If so, there is no
replacement available. There is a lengthy thread about a proposed
(dormant) project to recreate the element here:
https://www.worldwidedx.com/threads/d-104.241890/
Tim
On Tue, Feb 22, 2022 at 11:22 AM Wilson Lamb via
In the original post, he stated that he specifically did not want an
electret element, has found the dynamic replacements and is not interested,
but wants a crystal element replacement. Most of the links offered do not
offer what he is looking for. So I stand by my original statement with the
That element only works on the powered / amplified model.
On Tue, Feb 22, 2022 at 2:35 PM Dean Adinolfi wrote:
> W2ENY element works great.
>
> https://www.w2eny.com/
>
> Dean, KD3ANX
> __
> Elecraft mailing list
> Home:
This is a listing for a local ham, W6KLE who is not on this list. He would
like to sell his K2/100 with DSP and ATU (10-80m). The rig is pristine and
the asking price is $1400. Contact me off list for contact info.
Tim
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
Has anyone successfully used this combo? I bought the digirig to cut down
on cable mess when travelling. I can RX fine but on TX can't seem to get
output audio set to where it drives the rig properly without what seems to
be excessive RFI, even with the power level set low. The apparent RFI
causes
Once you figure it out and if you do sell, please let us know what you get
for it. A local here has a loaded K2/100 that he's been trying to sell for
a while but has only received what he perceives as low offers. I'm
interested to find out where the market for these is at.
Tim
AE6LX
On Tue, May
was price at about $500 and
> likely is higher now.
>
> 73,
> Don W3FPR
>
> On 5/31/2022 5:14 PM, Tim Tucker wrote:
> > Once you figure it out and if you do sell, please let us know what you
> get
> > for it. A local here has a loaded K2/100 that he's been trying t
Lol, yep. That's why code coverage is a necessary metric in unit testing.
On Wed, Jun 1, 2022, 9:42 PM Walter Underwood wrote:
> > On Jun 1, 2022, at 7:30 PM, Wayne Burdick wrote:
> >
> > "There's always another bug," to quote an anonymous sage, but
> please...go for it. We'd love to get
et or telnet:7373 access | RBN direct feeds
>
>
>
> On Fri, Jul 1, 2022 at 12:26 PM Tim Tucker wrote:
>
>> Does anyone have a recommendation for a portable-sized USB sound card
>> adapter to use with the KX3 I/Q? I had an older Diamond with 192 khz
>> input
>>
Does anyone have a recommendation for a portable-sized USB sound card
adapter to use with the KX3 I/Q? I had an older Diamond with 192 khz input
that I gave with the sale of K3, but I can't seem to locate any new devices
with 192 khz bandwidth that are also suitable for portable use - like with
a
Several years ago, I published a short article and accompanying video
comparing the original KX3 heat sink to the CoolerKX model including a
basic report on cooling performance. This one has since been discontinued,
but is similar in design to the PAE KX32 model. I never obtained the
updated
I do this with the MFJ 1026 in between the RX IN/OUT. I can use the 1026
preamp by itself with the RX ANT gain turned to zero or I can put the RX
antenna in line for dual VFO/Band RX or use as a diversity RX setup. There
is another thread about the effectiveness of diversity RX - I was playing
Assuming the Power Supply is sufficient, the next thing you should do is
the KX3 + KXPA100 Power calibration. I did this for a fellow ham and it
solved a similar situation:
https://ftp.elecraft.com/KX3/Mod%20Notes%20Alerts/KXPA100+KX3%20Power%20Cal%20rev%20A.pdf
Tim
On Wed, Oct 26, 2022 at 9:10
The easiest way is to set the defaults per band in the KPA1500 Utility.
Tim
On Tue, Sep 13, 2022 at 10:11 AM Jorge Diez - CX6VM
wrote:
> hello
>
> How can I use the KPA1500 to remember what bands need ATU IN and what bands
> need ATU BYP?
>
> I have ATU IN on HF bands, but when I change to 6
Is your K2 one with a PA Key out? If so, just an RCA cable and a coax
jumper.
Tim
On Wed, Jan 11, 2023 at 4:03 PM Karin Johnson
wrote:
> Hello Group:
>
> Can I use a Elecraft KPA1500 with a Elecraft K2???
>
> What accessory cable will I require
>
>
>
> Karin Anne Johnson K3UU
>
> Palm
How about the KX3? I tried to dial it up there and it bounced to 44.000.
Tim
On Wed, Jan 25, 2023 at 12:14 PM Wayne Burdick wrote:
> The K3, being a superhet that involves mixers, uses very narrow-band
> transmit band-pass filtering that doesn't allow operation midway between 10
> and 6
Mine has worked flawlessly for the year or so that I've had it. I've
pushed it pretty hard and for pretty long durations with some digital
modes, as well. So far, so good.
Tim
On Mon, Oct 31, 2022 at 3:18 PM Frank Scolaro
wrote:
> Of the 5 people I know with the KPA1500, 3 of them have made
t; Dave wo2x
>
> Sent from my iPad
>
> > On Feb 19, 2023, at 1:19 AM, Tim Tucker wrote:
> >
> > Is there an ETA on when the TX Sample output on the KPA1500 will be
> enabled
> > for Pure Signal?
> >
> > Thx,
> > AE6LX
> >
Is there an ETA on when the TX Sample output on the KPA1500 will be enabled
for Pure Signal?
Thx,
AE6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
For those of you who have successfully modified the AX2 for a higher band,
do you have any tips for disassembly of the coil? Desoldering the top
looks like it is easily accessible, but I can't quite tell how to get at
the bottom of the coil to desolder it for removal. Is there a simple trick
I'm
I got tired of waiting for special subtraction NR and decided to do
something about the lousy K4 NR on SSB. I bought the BHI Dual Inline NR
module and the results are impressive. I will publish a video soon. Anyone
who says that better NR won't help you make more weak signal contacts,
especially
Yes, of course. Works fine.
On Sun, Dec 3, 2023, 8:37 AM Steve McKee wrote:
> Hello,
> I’ve have the 2 meter module in my KX3, and am wondering if I can hook a
> small VHF amplifier to it, to increase power output??
> I’m planning on purchasing the KXPA 100 for the HF side….
> Course these are
If interested, here's a short video I made of the event, which also
showcases the KX3 and KXPA100
https://youtu.be/s_7H2Z6rpQE?si=xZ1XnbDaUnXMXS0L
On Fri, Mar 1, 2024, 12:17 PM Tim Tucker wrote:
> Sorry, 14.260
>
> On Fri, Mar 1, 2024, 10:25 AM Tim Tucker wrote:
>
>>
Assuming you're using the Elecraft mic with the up/down buttons - turn the
buttons off in the radio settings. There is a known and reported bug in
both the KX3 and KX2 that has never been fixed that causes this problem.
Tim
On Mon, Feb 26, 2024 at 1:40 PM wrote:
> I have heard of that
Hi all,
I'm activating the Pennzoil 400 at Las Vegas Motor Speedway usingrhe
Elecraft KX3 and KXPA100. I'll mostly be around 14.6mhz for a few hours
during the day all weekend if you'd like to make the contact.
Tim
AE6LX
W9WDX Amateur Radio Club
Sorry, 14.260
On Fri, Mar 1, 2024, 10:25 AM Tim Tucker wrote:
> Hi all,
>
> I'm activating the Pennzoil 400 at Las Vegas Motor Speedway usingrhe
> Elecraft KX3 and KXPA100. I'll mostly be around 14.6mhz for a few hours
> during the day all weekend if you'd like to make the c
101 - 147 of 147 matches
Mail list logo