Re: [Elecraft] Why K3's are on most DXpeditions

The illuminating facts are that the K3/S is selected because multiple radios operating in a close area don't interfere where other brands apparently do. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] K3S Schematics

When might the K3S schematics be available or are the K3 schematics the same? Thanks in advance. Jer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] P3 or Sub Rx?

be getting the SVGA adapter unless I get it pre-owned and need it. Thanks in advance.. just getting close.. 13 days and a wakeup :) Jerry Moore AE4PB, K3S SN # TBA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] K3/K3S DB9 Conn - If it plugs in, then it should work

I respectfully offer that it's a very good thing Elecraft used a commonly found connector in their radio designs. One bane of technology is when manufacturers use a myriad of proprietary connections. The huge advantage that we have in using common connections is the availability of plugs, sockets,

Re: [Elecraft] P3 or Sub Rx?

the Sub RX For D you should order both immediately If you get the P3 you will use it every time you turn on your radio. In fact, you will feel naked without it. If you get the Sub RX you will have it turned off most of the time. 73, Mike K2MK ae4pb wrote Just wondering what DXers who have the K3

[Elecraft] K3 Diversity Audio Equalizer question / clarification

and not RX Left/Right. If this is not an available function I'd like to submit it as a possible feature add for future revisions. Thanks in advance. Jerry Moore AE4PB, Future K3S owner. __ Elecraft mailing list Home: http

Re: [Elecraft] Microham Station Master Inhibit - K3 ?

Refer to the owners manual for the TX inhibit signal page 19. The pin 7 can be configured for TX on OR TX inhibit. I'd suggest using two resistors as a voltage divider so the pin voltage is never above 5VDC per the manual. -Original Message- From: Elecraft

Re: [Elecraft] Based on feedback - Proposed purchase

Here's my shopping list for Shelby. The items in yellow are maybe items. Items that I will get IF I have the extra cash. The P3 is first then KAT500. Primary use: DX That brings up questions: 1. Since my antennas are resonant and I have an old MFJ tuner and swr meter around here somewhere;

Re: [Elecraft] K3S OR K3

Doug, I just went through this process. The Kenwood TS590SG was on my list. AT the end of the day the deciding factors came down to support and upgradability. The Elecraft support is fanatical and as developments are made we have the option to update our radios (for the most part). If you

Re: [Elecraft] K3 CW Filters For Sale

Sorry about that, I get a bit over excited. It's odd that I've been in IT since the late 1980s, grew up with the internet (used to be dialup to the college then use *nix search tools to find content) and this is the first time with Reflectors. I'm on at least 3 now.. I'll cut the chattering :)

[Elecraft] Full duplex for Sat work?

but nothing definitive. It would likely be cheaper to buy a rig designed for sat work. Just thinking with the powerful DSP..etc.. I'll have to get more familiar with the K3/S insides and operations J Jerry Moore AE4PB , Future K3S owner, 19 days and a wakeup

Re: [Elecraft] K3S OR K3

One other question I asked. Why do the majority of DXpeditions use Elecraft K3/S ? Lots of hardcore contesters? I'm not saying brand X isn't good. I'm just asking a question. It's not because the gear is cheaper. There are lots of cheaper rigs out there. Jer -Original Message- From:

[Elecraft] Incremental build /design suggestions?

to pay cash. Jer / AE4PB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

Re: [Elecraft] Is there a good reason to buy a K3S instead of a used K3 ?

to get a K3s instead of a preowned K3? I'm returning to the hobby and looking hard at the K3S. So much has changed that I'm trying to catch up. Thanks in advance. Jerry Moore AE4PB __ Elecraft mailing list Home: http

[Elecraft] Is there a good reason to buy a K3S instead of a used K3 ?

Is there a good reason to get a K3s instead of a preowned K3? I'm returning to the hobby and looking hard at the K3S. So much has changed that I'm trying to catch up. Thanks in advance. Jerry Moore AE4PB __ Elecraft mailing list

Re: [Elecraft] Is there a good reason to buy a K3S instead of a used K3 ?

to get a K3s instead of a preowned K3? I'm returning to the hobby and looking hard at the K3S. So much has changed that I'm trying to catch up. Thanks in advance. Jerry Moore AE4PB __ Elecraft mailing list Home: http

Re: [Elecraft] Elecraft Digest, Vol 136, Issue 14

Sorry to disagree David, USB is a BUS. It's specifically designed to be able to connect multiple devices to it. https://en.wikipedia.org/wiki/USB Jerry Moore Future Owner Message: 14 Date: Thu, 06 Aug 2015 19:43:02 +0100 From: David Woolley for...@david-woolley.me.uk To:

Re: [Elecraft] High Speed CW issue with dropped characters/delay QRQ CW

the conversation takes place may need to be tweaked a bit. Fixes for the Dropped Characters may be as easy to fix with a new cable or a shorter one. Just thinking out loud here. I enjoy helping solve technical issues. Jer / AE4PB __ Elecraft

[Elecraft] Rig Insurance

not connected) when a storm was near and there was a lightning hit up the road. It would be a real shame to invest in a lifetime rig and lose it to something silly like a storm/fire..etc. Just wondering what folks do and their experiences protecting their investments. Jerry / AE4PB

[Elecraft] Re: High Speed CW issue with dropped characters/delay QRQ CW

possible to change the bitrate but apparently it is). For some reason I'm not getting emails from the reflector so I'm having to get them on the web.. Jer AE4PB It turns out the delay in this case is due to the particular keyboard in use as it has a sleep mode and wakes up slowly. 73

Re: [Elecraft] High Speed CW issue with dropped characters/delay QRQ CW

reading and searching it didn't sound possible to change the bitrate but apparently it is). For some reason I'm not getting emails from the reflector so I'm having to get them on the web.. Jer AE4PB It turns out the delay in this case is due to the particular keyboard in use as it has

[Elecraft] Audio/noise diversity/phasing question

this apply to the K3/S ? I'm very interested in anything that effectively results in a higher signal to noise. Thanks in advance. Jerry Moore, Future K3S owner 5Sept2015 AE4PB __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] Elecraft K3S: First Impressions

Congratulations Byron!! Thank you for sharing your experience. It really helps guys like me who have saved up and waiting to order. Jerry Moore AE4PB, Future K3S owner -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Byron Peebles Sent: Thursday

[Elecraft] WorkAround: Keyboard Issue - QRO Dropped Characters Via P3

Issue: When sending high speed CW (around 60wpm or higher) using a keyboard connected to the P3 you may experience occasional delays and/or dropped characters. Root Cause: Unknown - Elecraft will need to investigate and remedy. Resolution: Plug your video monitor into the P3 and change the

[Elecraft] WorkAround: Keyboard Issue - QRO Dropped Characters Via P3

Issue: When sending high speed CW (around 60wpm or higher) using a keyboard connected to the P3 you may experience occasional delays and/or dropped characters. Root Cause: Unknown - Elecraft will need to investigate and remedy. Resolution: Plug your video monitor into the P3 and change the

Re: [Elecraft] K3S Semi firm plan

told it will back off on power as SWR rises. P3-K Panadapter Kit for the K3S, K3 and other rigs ** for the time being I'll use an SDR to view the band Misc filters over time as needed. LOL, I'll be broke for a while but on the air. Jerry Moore AE4PB, K3S SN# TBA

[Elecraft] K3S Semi firm plan

over time as needed. LOL, I'll be broke for a while but on the air. Jerry Moore AE4PB, K3S SN# TBA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] K3S speaker vibration/whine

. If that 'fixes" the issue then I'll investigate further. It's a minor thing but something I want to resolve. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Me

Re: [Elecraft] K3S speaker vibration/whine

with others it needs to be engaged more. I'm enjoying the process of learning to really use it. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message

Re: [Elecraft] Review of Fred Cady's new K3S manual

The new version or edition 2 for the K3? Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun

Re: [Elecraft] K3S Split Rx Ant2/Tx Ant1

Sounds good, I guess I'll re-wire it internally as necessary. -Original Message- From: Don Wilhelm [mailto:w3...@embarqmail.com] Sent: Sunday, October 25, 2015 2:08 PM To: ae...@carolinaheli.com; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S Split Rx Ant2/Tx Ant1 Jer, It all

Re: [Elecraft] IMD and supply voltage

Does that imply we should all adjust our power supplies to output +15VDC? Will that damage my 2M Rig? I recently purchased the powerwerx SS-30DV from Elecraft when I purchased my K3S kit. Thanks Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB

Re: [Elecraft] K3S In-Depth Review Coming Soon?

), and being able to actually hear the desired signal at to start. Just curious because my prior radio did a decent job but nothing even close to what my K3S does. I have the 400Hz and 2.8KHz 8 pole roofing filters installed and use a dipole for RX. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB

[Elecraft] K3S Split Rx Ant2/Tx Ant1

, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] When is mode A not mode A?

probably a good time for this one to close.. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun

Re: [Elecraft] When is mode A not mode A?

specifically for what you want or ask Eric to close the thread. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic

[Elecraft] K3S speaker vibration/whine

for stereo and try that but am trying to figure out what I did wrong in the meantime. Thanks in advance. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic

Re: [Elecraft] K3S speaker vibration/whine

Outstanding!! I’ll try that. I don’t listen to my rig often over the speaker as I have some different hearing losses in each ear. Jerry, I have this buzzing in my K3, and have heard it in some (not all) of the K3s I have built for friends. I have found that most of it comes from vibration

Re: [Elecraft] When is mode A not mode A?

r even anything else for that matter. Just guidelines and what's been usually done. If we want more features in Elecraft gear it's probably a trivial thing to just ask. What CW features specifically are NEEDED but lacking? Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://

Re: [Elecraft] K3S speaker vibration/whine

igate further. It's a minor thing but something I want to resolve. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:ele

Re: [Elecraft] K3 DSP processor speed

. Kenwood makes a good radio, however, I've NEVER had good luck with service from them or Yaesu. Based on my experiences in forums, reflector, and talking with other hams; Elecraft is rabidly good about support. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB

[Elecraft] P3 Feature Request

it instead. Thanks in advance. jer Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. __ Elecraft

Re: [Elecraft] Speech bord for any of the Elecragt rigs?

If you use a computer to control your rig, most of them can speak mode/freq..etc.. If you don't use a PC look around for some RASPBERRYPI software to speak the mode/freq..etc. Something like this has probably been done. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http

Re: [Elecraft] K3 DSP processor speed

had to send your Kenwood radio in for repair. You typically end up sending it to a third party repair shop with the hopes they know what they are doing and do more good than harm. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate

Re: [Elecraft] K3 RX issue with KAT3A?

Ok, ty.. The only way I know of currently to save the settings out is to use HRD. I'm actually writing a program in my spare time to see if I can write a utility to read/write configs specifically for this purpose. Jer Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http

Re: [Elecraft] Soldering crimped connectors is not a good thing.

flew on was from the 1960s). Validate the connectors are rated for the wire gauge/type please. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message

Re: [Elecraft] Soldering crimped connectors is not a good thing.

but didn't crimp or hold up the same. I ended up dumping them and ordering replacements from powerwerx. Just sharing my experience. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced

Re: [Elecraft] K3 RX issue with KAT3A?

the issue then I'd start double checking the connections per the assembly manual. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft

Re: [Elecraft] having problems connecting my K-3 to Ham Radio Deluxe

What issues are you experiencing? I'm running the latest HRD with Win 10 and not having any issues. Are you running any type of port multiplexing software? I don't recall the name, however, one popular one definitely isn't stable on win10. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N

Re: [Elecraft] K3S - Method to print K3/K3S configuration files from K3 Utility

I have the second edition of the book and am not finding the HRD method. Can you please direct me to a page number? Jer Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic

Re: [Elecraft] LP-PAN 2 and P3

LP-Bridge is not stable on windows 10 used with the newest ham radio deluxe. It's been reported to be an HRD issue but I've had LPB crash on it's own without anything else running on windows 10. It likely needs an update. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http

Re: [Elecraft] INRAD has a new owner

Scott at Vibroplex has excellent customer service and his products are awesum!!! I look forward to seeing what's next for Inrad. I expect Scott will take it to the next level for sure. -Original Message- From: elecraft-boun...@mailman.qth.net

Re: [Elecraft] Unplugging the radio to protect it

of their way to make it difficult for you to get anything under warranty. Jerry Moore AE4PB, K3S - S.N. 010324 An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net

Re: [Elecraft] new to list with new K3s

, windows/mac/linux..etc..), how it's connected, and what the end result is expected to be. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From

Re: [Elecraft] TX3X K3/KPA500 DXpedition to Chesterfield Islands onthe air

Not hearing them at all -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Sent: Saturday, October 10, 2015 2:43 PM To: Wayne Burdick; Wes (N7WS) Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] TX3X K3/KPA500 DXpedition to Chesterfield

Re: [Elecraft] TX3X K3/KPA500 DXpedition to Chesterfield Islands onthe air

The issue is likely because my dipole is oriented towards EU.. I need to lookup the bearing from SC and probably move the ends of my dipole (not easily done). Jer -Original Message- From: Jack Brindle [mailto:jackbrin...@me.com] Sent: Saturday, October 10, 2015 3:51 PM To:

[Elecraft] K3S Radio check?

in advance. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. __ Elecraft mailing list Home: http

[Elecraft] K3S / P3 thoughts and notes.

to see if you like it. Based on my experiments I'm sold on the concept and now just need to save up the cash for the hardware. Antennas are next on my list so the P3 gets bumped down a bit for now. 73 .. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http

Re: [Elecraft] Elecraft SSB Net Announcement

Trying to check in but only occasionally hear someone that sounds like net control but not hearing any invites to check in Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic

Re: [Elecraft] K3S Radio check?

. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] K3S AGC macro question

MCU 05.35 Tnx. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. __ Elecraft mailing list

Re: [Elecraft] Reflector Help

I use K-9 Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mark K9BOO via

Re: [Elecraft] Reflector Help

HAHAHAHA!! J Open the google playstore and enter k-9 mail ..that's what I use. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. From: Phil Wheeler [mailto:w

Re: [Elecraft] Windows 10 and LP-Bridge

So you're saying that LP-Bridge isn't RFC compliant.. ok.. J Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. From: Tom [mailto:tom...@videotron.ca] Sent

[Elecraft] K3S Macro issue with AGC SLP

for AGC TH it works MN017;MP008;SWT14; After evoking MN017;MP001;SWT14; Issuing the commands MP; returns ?; which per the book indicates the radio is busy. I'm sure it's something I'm doing wrong. Thanks in advance. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N

Re: [Elecraft] K3S Macro issue with AGC SLP

forwarded to their programmer and/or the reflector. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailm

Re: [Elecraft] K3S Macro issue with AGC SLP

. As expected the issues I'm experiencing are just learning curve type opportunities. I'm glad I purchased the K3 book and have the K3S book on pre-order. It's definitely worth having. Jer Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur

Re: [Elecraft] K3S Macro issue with AGC SLP

, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick Sent: Monday, October 12, 2015 4:47

Re: [Elecraft] Windows 10 and LP-Bridge

have a tower in the back yard without long feedlines (that contribute to signal loss). Slowly looking at that. The Raspberry Pi hardware looks perfect as the bridge platform. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate

Re: [Elecraft] Windows 10 and LP-Bridge

in advance. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tom Sent

Re: [Elecraft] Prolific driver windows 10

The MFJ unit sold by HRO works on windows 10. Jerry Moore AE4PB, K3S - S.N. 010324 An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Alfredo Velez WP3C Sent

Re: [Elecraft] K3S - Method to print K3/K3S configuration files from K3 Utility

, just a lot of work to setup once. Let me think on it. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -Original Message- From: Elecraft [mailto:elecraft-boun

[Elecraft] K3/K3S with SubRx - Independant DSP control question/request

. As a minimum the EQ settings could be added to the K3 utility maybe? I'm asking as I have different hearing losses in each ear where what sounds good to one side doesn't sound right to the other and vice versa. Thanks in advance. Jerry Moore AE4PB, K3S future owner, 7 days and a wakeup til order

[Elecraft] WTB: 400Hz and 200Hz Filter

Anyone have pre-owned but working /good condition filters for sale for the K3/K3S? WTB: 400Hz and 200Hz Filters Thanks in advance. Jerry Moore AE4PB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] K3S IMD Questions

about this and if it’s an issue. What the implications are of the increased IMD, and what if anything I can do resolve it. Thanks in advance. Jerry Moore AE4PB, Future K3S owner – 5 days and a wakeup. http://www.eham.net/ehamforum/smf/index.php/topic,97093.0.html is the thread

Re: [Elecraft] K3s Fldigi and Mac

In FLdigi, Click CONFIGURE, then SOUNDCARD and report back the Port Audio settings, Do you see the RIG go into TX mode? (you state it doesn't appear to transmit but that's vague). How is the program configured for PTT? CONFIGURE/Rig Control, PTT. Are you cabled to use DTS/RTS via the DE9 connector

[Elecraft] K3S SubRx Question

the RX (and there is something about the potential to damage the unit). Also is the K3 schematic correct for the K3S? Thanks in advance. Jerry Moore AE4PB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

Re: [Elecraft] K3S IMD Questions

honestly don't know enough about the subject. All help and education is appreciated. Jerry Moore AE4PB, Future K3S, 4 days and a wakeup. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] K3S trouble doing PSK31 w DM780

Check your HRD configuration in the sound card settings: HRD/DM780/Options/Soundcard - verify the output transmit device shows the K3S sound card. Also in your windows mixer ensure that the volume slider is up. Jerry Moore AE4PB -Original Message- From: Elecraft [mailto:elecraft-boun

[Elecraft] WTB KFL3A-200

WTB KFL3A-200 Thanks in advance. Jerry Moore AE4PB, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

[Elecraft] K3S - Ordered Today!!

YAY! I ordered my K3S today. I'm really hoping I get a cool serial number Jerry Moore, AE4PB, K3S SN: TBA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] KSYN3A mod problem

When you purchase alcohol to use as cleanup it's best to get the highest concentration you can get, else, there is a risk of it leaving a residue and the evaporation rate is much slower. Most drug stores sell 91% or higher if you ask/look for it. 60% is more common. Higher % is better for cleaning

Re: [Elecraft] P3 - SVGA Monitor Compatibility Suggestions

You should be able to adjust the monitor settings to fully fill the screen. It's common and typical to tweak the monitor settings for full screen viewing. If the video card were incompatible the image would be unusable and appear scrambled or not appear at all. -Original Message-

Re: [Elecraft] K3S - Ordered Today!!

in print and/or video doesn't do it justice. Seeing in person makes a huge impact. You see it do things that you won't be able to do with an SDR. Jer AE4PB, K3S SN: TBA From: Phil Anderson [mailto:aldenmcduf...@sunflower.com] Sent: Sunday, September 06, 2015 9:20 AM To: Jerry Moore Cc

Re: [Elecraft] Elecraft K2 7615

Perhaps ask someone to build it for you for a small fee? When you purchase a radio as a kit it's expected that you ENJOY the construction/assembly process. If that's not your thing then just find someone to build it for you. -Original Message- From: Elecraft

[Elecraft] K3S - Manuals all printed - ready to assemble

I'm a little excited. I printed out all of the manuals, edited per the errata and put into document protectors. I like to print my own manuals so I can write on them (in pencil) and keep the originals pristine. Jerry Moore AE4PB, K3S future owner.. 10 days and a wakeup

Re: [Elecraft] K3 or K3S: Whadayathink?

at doesn't directly answer your question but I hope that helps. If you have the cash then keep your K3 as a backup and get the K3S as your primary :D Jer AE4PB, K3S SN# TBA soon!! -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of dhh...@comcast.net Sent

Re: [Elecraft] SideKar vs PX3

AFAIK based on reading the SideKar site it's just reporting what the Kline radio is giving it already decoded. $250 is a bit much when you think about what the box does. Seems to me you could build up a RaspberryPi solution to do the same thing with a few tweaks for under $100 AND have

[Elecraft] K3S Patience

I'm not sure which is worse; Saving up and waiting to order my rig or waiting for it to be shipped (kit) and arrive :O I was told it "should" ship Wed/Thurs this week and arrive Thurs~Sat Next week. I fear that UPS Ground or USPS Ground or whomever Ground is riding a bicycle LOL... Hours feel

Re: [Elecraft] Napple Updates?

Isn't napple a drink? ;) -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Bunte Sent: Thursday, September 10, 2015 2:10 PM To: n2...@n2lrb.com Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Napple Updates? Jose - You lost me somewhere.

Re: [Elecraft] K3S height with stand extended?

Thank you. Any idea how much space I need between the top of the rig and the bottom of the hutch to be able to get Rose's dust covers on? Thanks.. I need to look at my dimensions a bit. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne

[Elecraft] K3S height with stand extended?

Hi All, I'm designing a hutch for my operating desk and would like to know the height of the K3S with the stand extended. The 4" dimension given for the rig appears to be with the stand folded. Thanks in advance. Jerry Moore AE4PB, K3S SN# I should know Sunday when the big brown truck

Re: [Elecraft] Elecraft SP3 External Speaker details

ost if not all of my operating will be with headphones. The point here is that it's on my list :) Jerry Moore AE4PB, K3S SN# Arrives Wed. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob McGraw - K4TAX Sent: Sunday, September 13, 20

Re: [Elecraft] Elecraft SP3 External Speaker details

Reflector' Subject: Re: [Elecraft] Elecraft SP3 External Speaker details Jerry's (AE4PB) post and others suggest new speaker is actually made in the USA. Is that true?? Mike AC5P On Monday, September 14, 2015 10:34 AM, "ae...@carolinaheli.com" <ae...@carolinaheli.com>

Re: [Elecraft] Elecraft SP3 External Speaker details

bet with the correct transverter we could hear the mars rovers tho. Jerry Moore AE4PB, K3S SN# ARRIVES TODAY!!! -Original Message- From: Andy McMullin [mailto:a...@rickham.net] Sent: Wednesday, September 16, 2015 7:22 AM To: Jerry Moore Cc: Jim Lowman; elecraft@mailman.qth.net

Re: [Elecraft] K3: reverse 12 volt supply

I may be off base but seems to me if you have RF in the shack you really have a lot more to worry about than twisting power cables ? unless of course they are a multiple of the wavelengths you are operating. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On

Re: [Elecraft] Analog vs. Digital Front Ends

Yes but it still has the equivalent. It's just integrated rather than being separate. That doesn't make it better or worse, it just lowers the component count. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Barry N1EU Sent: Wednesday, September

Re: [Elecraft] KPA500 Connection to K3S

Accessory plug? -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Amateur Radio Operator N5GE Sent: Wednesday, September 16, 2015 12:10 PM To: Elecraft Reflector Subject: [Elecraft] KPA500 Connection to K3S Now that the K3S has no RS232 connectors,

Re: [Elecraft] K3: reverse 12 volt supply

, and is NOT INTENDED TO BE OFFENSIVE IN ANY WAY. Jerry Moore AE4PB, K3S SN# TBA later TOMORROW!! -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Fjeld Sent: Tuesday, September 15, 2015 1:02 AM To: Fred Townsend; elecraft@mailman.qth.net

[Elecraft] K3S Build Progress: 1st power-on

, 3 modules, the 100w PA and sheet metal . Jerry Moore AE4PB, K3S SN# 10324 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

  1   2   >