[Elecraft] K5 beta testers
I was just wondering whether any of the K5 Beta Testers have taken out KF1VE as a vanity callsign? 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds.| | Website: https://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [Elecraft-AX/KX/KH] Elecraft 80M SSB Net Announcement
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Rotary encoder
Several years ago I had a problem with one of my K3 encoders and obtained a replacement E850239 from Elecraft under warranty. However, I noticed that the two halves of the encoder had started to separate. They were held together by small aluminium rivets. By carefully removing the rivets, one by one, and replacing them with small screws of a suitable size the encoder could be repaired. If your problem is with the encoder halves separating, Evert, that might be worth a try. 73 de David G4DMP On 21/05/2023 10:46, ev...@pa2kw.com wrote: I think I have a defect rotary encoder on a K3. It is the one used for setting the bandwidth (Hi/Width). Anyone out here who knows the manufacturer / type number of this rotary encoder? 73. Evert PA2KW -- + - - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds, UK | | Website: https://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ERR DVR
Josep - If you do not have the DVR installed in your K3, go to the Config Menu and check the KDVR3 entry. It should say 'not inSt'. If it says 'nor' then turn it to 'not inSt'. I hope that solved the problem. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds.| | Website: https://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ERR DVR
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2/100 RS232 trouble
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] XV432
I would like to thank Don, Mike and Peter for responding to my plea for help for an XV transverter crystal oven. I never cease to be amazed at the help given on the Elecraft reflector which is second to none. Thank you gentlemen. 73 de David G4DMP In a recent message, David Pratt writes I am wishing to buy an XV432 transverter for use with my K2. If anyone has one which they no longer need, I would be pleased to hear from them. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] XV144 Crystal Oven
I would be pleased to hear from anyone who has a crystal oven for the XV series of transverters. The Elecraft part number is E980076. The oven in my XV144 has gone open circuit. I have attempted to search the Elecraft website for one without success and have even entered an enquiry but have had no response. Any help would be much appreciated. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] XV432
I am wishing to buy an XV432 transverter for use with my K2. If anyone has one which they no longer need, I would be pleased to hear from them. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KX3] Craziest / most rewarding QSOs
I would love to go back to 1955, Wayne, using homebrew equipment, when I was first licensed (as G3KEP) and we used condensers instead of capacitors. Even in 2000 when I built my first K2 MoJo, I only had to press the key and got a pileup calling me. Nowadays, with the advent of PLT, CFL & LED lamps and switched mode PSUs, I have an S9 noise level. So signals have to be over S9 for me to work them. Still, that should be OK for contests when every signal is 5NN ;-) 73 de David G4DMP In a recent message, "Wayne Burdick n...@elecraft.com [KX3]" writes >15 meters never fails to amaze me. > >During a recent bout of paper log archaeology, I rediscovered a QSO I >logged as a teen, in 1972. I was just minding my own business, tuning >up using a Heath DX-20 driving 3 feet of coax to a 40 W incandescent >bulb. Then a guy in Illinois called me > >Some years later I was using a home-brew rig (the “Safari 4”) while >visiting my Mom in Arizona. The battery was nearly depleted, the rig >putting out only 200 mW. The antenna: 8 feet of wire running directly >from the rig through a window to a clothesline. Tuning slowly, I heard >a CQ from Rwanda (9X5). I called him and got a “QRZ?” With a *lot* of >patience on his end, we completed a basic QSO. No computer, no narrow >filtering, no noise blanker. > >I would’ve gone nuts for a KX2 back in those days. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA1500 ordered 8/24 [Elecraft Shipping Status Page Update]
I am not sure that many people would need one in Europe, Tony. At least, in the UK we are only licensed for 26dBW (400W) so the KPA500 would be more than adequate. 73 de David G4DMP In a recent message, Tony G6GLPwrites >Its great to hear the major shipping has started of the KPA1500 and the >next question to ask is how long will it take to get over the initial >order inrush and then move on to offering World wide well at least >Europe? > >73 de Tony G6GLp -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 DTMF tones
I am delighted to report back that changing the wire from pin-5 to pin-6 has done the trick. DTMF tones work fine on the K3 as do also the UP and DOWN buttons with MIC BTN On in the CONFIG menu. The DTMF tones also work on the K2. What is surprising, however, is that everything works equally well whether MIC BIAS is On or Off. I would have thought that the voltage on pin-6 of the front panel socket would have gone off when MIC BIAS is set to Off, but that is evidently not the case. Thank you again, Joe. 73 de David G4DMP In a recent message, "Joe Subich, W4TV"writes > >Elecraft and Kenwood reverse the pin used for +8V that powers >the DTMF encoder. You will need to move the wire on pin 5 of >the Kenwood Foster plug to pin 6 to get the +8V from K3/K3s. >The same is true if you want to use a Kenwood desk mic with >built-in preamp or active equalizer (e.g., MC-60A, MC-80, MC-85, >etc.) with the preamp or eq. >73, ... Joe, W4TV -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 DTMF tones
Thank you, Joe, Don and Chuck Jack; the mic is an MC-48 which is shown as an electret on the schematic. I shall certainly swap the plug connection from pin-5 to pin-6 and give it another go. I note that the UP and DOWN buttons give some strange effects so those need my attention too. 73 es tnx agn de David G4DMP In a recent message, "Joe Subich, W4TV" <li...@subich.com> writes > >Elecraft and Kenwood reverse the pin used for +8V that powers >the DTMF encoder. You will need to move the wire on pin 5 of >the Kenwood Foster plug to pin 6 to get the +8V from K3/K3s. >The same is true if you want to use a Kenwood desk mic with >built-in preamp or active equalizer (e.g., MC-60A, MC-80, MC-85, >etc.) with the preamp or eq. >73, ... Joe, W4TV On 2/7/2018 9:09 PM, Don Wilhelm wrote: > David, > > Are you certain the Kenwood mic is electret? Most are dynamic. Make > certain the mic plug is wired for standard Kenwood pinout for HF mics, > Some made for VHF rigs may be different. > > 73, > Don W3FPR > > On 2/7/2018 9:47 AM, David Pratt wrote: >> In an archived message Lyle KK7P said . >> >>> Currently, use of a DTMF-equipped microphone or generating the tones >>> with an attached device. The K3 does not generate DTMF tones,although >>> it could in a future firmware enhancement. >>> >>> 73, >>> >>> Lyle KK7P >> >> Well, in the absence of the long awaited DTMF software enhancement for >> the K3 I have at last bought myself a Kenwood microphone, fitted with >> an 8-pin plug that mates with the K3. But I have had no success in >> getting the DTMF feature to work :-( >> >> As the Kenwood mic is electret I have switched bias on with MIC SEL >> although, surprisingly, the microphone seems to work equally well with >> it switched off! >> >> Does anyone know how to get the Kenwood DTMF mic to work with the K3? >> -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 DTMF tones
In an archived message Lyle KK7P said . > Currently, use of a DTMF-equipped microphone or generating the tones > with an attached device. The K3 does not generate DTMF tones,although > it could in a future firmware enhancement. > > 73, > > Lyle KK7P Well, in the absence of the long awaited DTMF software enhancement for the K3 I have at last bought myself a Kenwood microphone, fitted with an 8-pin plug that mates with the K3. But I have had no success in getting the DTMF feature to work :-( As the Kenwood mic is electret I have switched bias on with MIC SEL although, surprisingly, the microphone seems to work equally well with it switched off! Does anyone know how to get the Kenwood DTMF mic to work with the K3? 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Unsubscribing
Regrettably, after 17 years as a member of this group I am now unsubscribing as nowadays there are so few messages of relevance to those of us in the UK and the developed world. Any queries I have on Elecraft products will be made by direct mail to Eric, Wayne, Don and to Elecraft support. 73 to all David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Amateur Radio Guidance for Licensees
Last month the latest edition of Amateur Radio Licence - Guidance for licensees was published by Ofcom. I normally print this out as an A5 booklet and keep it by me to refer to in conjunction with my amateur licence. It is a very useful document. https://www.ofcom.org.uk/__data/assets/pdf_file/0026/82637/amateur_radio_licence_guidance_for_licensees.pdf 73 de David G4DMP -- + - - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds, UK | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Just a test
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Keying CW in SSB Mode
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft] A little theory.
Thank you, Fred. Having one of the CNC knobs on my K3, I had forgotten about that. I did not realise it was causing such an issue. 73 de David G4DMP In a recent message, Fred C. Jensen <k6...@foothill.net> writes >My K3 has one, it's around the Big Knob. >Fred K6DGW >Sparks NV DM09dn >David Pratt <da...@g4dmp.co.uk> wrote: >>Excuse my ignorance, Tim; maybe I am being naive, but could you >explain >>to which Elecraft products you are referring? I do not know of any 'O' >>rings in any of my Elecraft transceivers. > -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] A little theory.
Excuse my ignorance, Tim; maybe I am being naive, but could you explain to which Elecraft products you are referring? I do not know of any 'O' rings in any of my Elecraft transceivers. 73 de David G4DMP In a recent message, "k...@juno.com"writes > >A long time admirer. For me, his "O ring and a glass of ice water" >demonstrationwhich kicked the air out of the NASA gas bags during >theChallenger Disaster inquiry was most memorable. A remarkable man. >72, Tim Colbert K3HX -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXBC3 clock drift
In a recent message, "etks...@gmail.com"writes >When you are logging to paper and have the radio clock displayed for >the specific purpose of having a handy UTC clock it's annoying when >it's off. The KXBC3 is marketed as a battery charger and RTC, and I >bought it for both. As it turned out not to be as expected, Erik, would you like to sell it? 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] DTMF Tones on the K3
Many thanks, Joe and Don, for that useful information which I shall keep in mind. I would, however, like to continue using my D104 microphone with which I receive outstanding good quality reports. 73 de David G4DMP In a recent message, Don Wilhelmwrites >I agree with Joe, but there is a typo - the brown wire should end up on >pin 6. > >73, >Don W3FPR > >On 6/1/2016 10:03 AM, Joe Subich, W4TV wrote: >> >> Pick up a Kenwood MC-48, move the brown wire from pin 5 to pin 5 in the >> mic connector and be done with it. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] DTMF tone support on the K3
Do you know whether there is any progress on this, Lyle? I have been struggling with a handheld DTMF device, held close to the K3 microphone for years! It is somewhat cumbersome and I look forward to the long awaited DTMF feature on the K3 which I think has been on the software list for years. I realize the KX3 has that feature, but unfortunately the output power of the KX3-2M module is just not sufficient to get me into my nearest Echolink repeater reliably. The K3 with its K144XV would be just fine. I could buy a Kencomsu rig specifically for the purpose but I would far prefer to use my trusted K3 than go to the opposition. 73 David G4DMP On Sun, Mar 27, 2011 at 6:33 PM, Lyle Johnson wrote: > Currently, use of a DTMF-equipped microphone or generating the tones > with an attached device. The K3 does not generate DTMF tones,although it > could in a future firmware enhancement. > > 73, > > Lyle KK7P > >> I've been trying to find if there is a way to do this but have been >> coming up blank... Is there a way to send DTMF tones with the K3? -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Will the K4 look like this?
You will have to wait until the Dayton hamvention to find out. 73 de David G4DMP On Tue, 12 Apr 2016 09:49:31 -0400 Dan Atchison via Elecraftwrote: > The MB1 Transceiver > > http://sunsdr.eu/product/mb1/ > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3EXREF question
Andy - Without the K3EXREF connected, the REF CAL frequency will be fixed and the K3 will drift, albeit very slightly, particularly when it is first switched on. With K3EXREF locked with your 10MHz standard the REF CAL frequency will vary to correct any drift in the K3. If you measure the output frequency of your K3 with an accurate frequency meter, such as a digital counter locked to a standard, you will find that your K3 is stable to within +/- a couple of Hertz. 73 de David G4DMP In a recent message, ANDY NEHANwrites >Sometime ago I installed the K3EXREF which I feed from an external >10MHz double oven Xtal oscillator. I am confident the K3EXREF is >installed and configured correctly as when in use and the external >oscillator is connected the front panel says REF*CAL with the * >blinking. Attempting to change the local oscillator frequency gives the >message "Locked" just as the manual says. >However, I am puzzled as the local oscillator frequency display slowly >drifts down from 49.379.675Hz to 49.379.622Hz over a period of at least >an hour from K3 switch on. I leave the external oscillator on >permanently. I was expecting the local oscillator to rapidly get to its >final frequency. Can someone explain whats happening as I am puzzled?? >My firmware is the latest version. >Andy G4HUE -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3EXREF - What am I doing wrong
Yes, you could be missing something, Tighe. There is an addendum to Page 4 which reads: After installing the K3EXREF module, you must enable it in the K3 menu before it can be used if your K3 is equipped with MCU firmware 4.57 or later. Enable the K3EXREF module as follows: * Turn the K3 on. Confirm that TECH mode is on (CONFIG:TECH MD On). * Turn the VFO B knob to locate the CONFIG:REF CAL menu entry. * Tap the REV / 2 switch and note that the VFO B display flashes between XREF IN (K3EXREF module active) and XREF OUT (K3EXREF module disabled). Tap the REV /2 switch so that XREF IN is displayed. Ii is important to disable the module in the menu if you remove the K3EXREF module in the future. http://www.elecraft.com/manual/E740156E%20K3EXREF%20Errata%20A2-5.pdf I hope that helps. 73 de David G4DMP In a recent message, Tighe Kuykendallwrites >I picked up the Leo Bodnar frequency reference and a K3EXREF board >after reading a couple of threads here. I Installed the board >according to instructions, took static precautions, am using a known >good cable from the K3 to said reference. I can clearly hear the 10MHz >tone on my K3 when I tune a VFO to 10MHz and the signal goes away if I >disconnect the coax from the freq reference. I've checked all of the >tmp connectors and reseated the K3EXREF board on the K3REF board and >all pins are properly engaged. But still no * on the display and the >REF CAL setting remains unlocked. > >Am I missing something, is there something to do to enable the K3EXREF >other than plug in the freq reference and wait for some magic to >happen? > -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K3] Clock bug?
It would be even 'cooler' if the KX3/K3 clocks were locked to MSF or RWM for the benefit to folks in the rest of the world! No, no, the existing Elecraft transceiver clocks are plenty accurate enough for the purpose of our logs. If you want anything more accurate, buy a watch. 73 de David G4DMP David Pratt on his Nexus 7 tablet. On 28 Jan 2016 04:44, Ken <wa8...@gmail.com> wrote: > > Great idea! > > --WA8JXM > > On 1/27/16 8:45 PM, Dave Cole wrote: > > It would be so cool if the Elecraft clock set itself when I tune to > > WWV, using the data WWV sends.:) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] kpa500 35 watts drive
What is wrong with the sound, John? Are you getting distortion? Could you be more specific and then someone should be able to assist you. 73 de David G4DMP David Pratt on his Nexus 7 tablet. On 16 Nov 2015 16:19, John Veach <k...@att.net> wrote: > > When I had my KPA500 I never ran more than 25 watts to get full output. > Doesn't sound right to me. > de ke4d > John > > Fort Clark Springs, Texas > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to da...@g4dmp.fsnet.co.uk __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] No power out and no receive
What is the serial number of your transceiver and do you have a callsign? Also, what revision of the manual do you have? With that information there are lots of people on here able to help you. 73 de David G4DMP On 30 Sep 2015 04:29, way235wrote: > > I have noise on all bands but don't hear any signals at all. > I have a TX light when keyed and can see the meter move when I speak into > the mic but I have no power output. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] REMOVE ME FROM YOUR EMAIL LIST!!!
In a recent message, Rick Rosswrites In Yahoo groups have set Mail Subscription to NO EMAILS and even UnSubscribed to KX3 Yahoo Group but continue to get EMails. But the Elecraft reflector is NOT a Yahoo Group, Rick. To remove yourself from it you need to follow the links at the bottom of this message. 73 David G4DMP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: Don't forget eclipse
On 28 Sep 2015 05:52, Matt Zilmerwrote: > > The blood moon was pretty fantastic from Montrose, CO. > How did it affect radio conditions, Matt, particularly as regards noise and on which bands? Were you using the new Synth boards? 73 de David G4DMP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FCC Votes to Close 11 Field Offices
'Nuff said here. I'll be more than happy to engage in private discussion,-- Please do just that. This is of no interest to me and I am sure nobody would want me to start a discussion about Ofcom in the UK. David G4DMP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need local help
Michael - You don't need a computer to send and decode PSK31 and CW. Provision for decoding and sending PSK31 and CW are already built into the KX3 firmware. All you need to do is to plug a paddle into your KX3 and set up the menu accordingly and you're away. 73 de David G4DMP On 09/06/2015 04:59, Michael Rudolph wrote: I live in the Washington DC area and am willing to drive to anyone's location who can demonstrate how to hook up and use my KX3 for psk31 and CW. I would like to use my WINBOOK tablet instead of a laptop if possible. It has a USB port but no mic input. I succeeded in connecting the KX3 to the tablet but that is as far as I have gotten except that I can send code via the utility program and decode CW (albeit very badly) via Ham Radio Deluxe. -- - - - - - - - - - - - - - - - - - | David M Pratt, Kippax, Leeds, UK| | Website: http://www.g4dmp.co.uk | - - - - - - - - - - - - - - - - - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Button Box
On 15 Feb 2015 19:18, David Ferrington, M0XDF m0...@alphadene.co.uk wrote: Hmmm - what about us iMac lovers? Upgrade to a PC. That would solve a lot of compatability problems. 73 de David G4DMP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Clock chip
That would be no good to me, Ken, WWVB is not receivable in Great Britain. We would need MSF on 60 kHz. Remember that the KX3 K3 are global transceivers used throughout the world. 73 David G4DMP David Pratt on his Asus Nexus 7 tablet.On 15 Feb 2015 18:24, Ken G Kopp kengk...@gmail.com wrote: Given the tiny size of atomic clock / WWVB devices ... as in wrist watches ... it would seem one could be integrated into both the K3 and KX3 and make the clock actually usable. 73 Ken - K0PP On Feb 15, 2015 11:17 AM, Lynn W. Taylor, WB6UUT k...@coldrockshotbrooms.com wrote: In which radio? On 2/15/2015 9:52 AM, Jim Miller wrote: Elecraft, Please give us a replacement clock chip that will keep time. An adjust method for what we have? Thanks, Jim KG0KP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@coldrockshotbrooms.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to kengk...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to da...@g4dmp.fsnet.co.uk __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 , Elecraft Transverter K144XV-K
I have just measured my K144XV power output with an accurate power output meter and find that with the K3 set for 1mW the output is 10.5W. But setting the K3 to 0.1mW (fully counter-clockwise) the output goes down to only about 7W. No matter what I do, I am unable to reduce the power further. It will be interesting to see if other K144XV users find the same. 73 de David G4DMP On 7 Jan 2015 04:20, Viggo Magnus Nilsen la9...@online.no wrote: Hello K3 owners ! Want to know the lowest power setting Elecraft internal 2 meter transv.( K144XV-K)??, know the max out is 8 to 10 watt approx... My DB6NT transverters ( IF 144 MHz) need 0,5 to 5 watt ,(IF power settings are adjustable in the DB6NT Transverter) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 4m-Band Bandlimits
Where have you read that, Hans? Looking through the Region 1 papers and also the agenda for WRC-15 I can find no reference to the 4 metre band. The only thing that could affect the K3/KX3 would be the band within 5250 and 5450 kHz. At present the K3/KX3 will only transmit up to 5420kHz. For a future WRC there is a possibility that top band will be extended down to 1800 kHz again to bring the band in line with Regions 2 3. David G4DMP On 3 Aug 2014 14:45, Hans H Vollmer hans.h.voll...@t-online.de wrote: 1. I am using my KX3 for the new 4-m-band (new in Germany!). I have a problem with the band-limit. In the future there will be a 4m-band from 69.9 to 70.5 MHz in region 1. When sending below 70 MHz (dummyload, hi) the message band end appears. Not so with my K3. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 #6951 It's Alive!
Chuck - It's good to know that the K2 can take anyway between one week and ten years to build. I am sure it was worth waiting for and you will get lots of enjoyment with it. Of all the Elecraft kits I have built the K2 gave me the greatest pleasure and satisfaction. Incidentally, there is not a 2m option for the K2 unless you mean the 5Mhz/Xverter interface. 73 de David G4DMP On 18 May 2014 14:35, ke9uw c-haw...@illinois.edu wrote: I took about 10 years to finish mine. I started it, put it aside and then saw lots of mods and so forth, so I noted them and fit them into the instructions. When I finally got back to it, I didn't have to unsolder anything to fit the mods in. I did have to toss a firmware chip that had never been installed in favor of a newer one that I ordered also. It all worked when done! All the options installed but the 2M and the 100 watts. David Pratt __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Fwd: KX3 kit: No CE badge for self-built KX3s?
The moral there is not to ask too many questions. David Pratt G4DMP On 18 May 2014 18:33, David Woolley (E.L) for...@david-woolley.me.uk wrote: Although Elecraft may get away with it, a lot of equipment that is CE marked has final assembly stages that have to be done after unpacking the box. I don't think the EEC exemption was designed to cover the final assembly of dedicated sub-assemblies, but rather assembly from commodity parts. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 4M operation and 4M/2M modules
Yes, Dennis, you may indeed operate on the 70.0-70.5MHz band when operating in the UK under the terms and conditions of the CEPT Licence. For Full Licence holders the maximum PEP is 160 Watts (22 dBW) and for Intermediate Licence holders the maximum PEP is 50 Watts (17 dBW). The band is Secondary; Available on the basis of non-interference to other services inside or outside the UK. Grab a copy of the CEPT Licence (T/R 61-01) from http://www.erodocdb.dk/docs/doc98/official/pdf/TR6101.pdf The UK Licence Terms, conditions and limitations are at http://www.g4dmp.co.uk/UKlicence.pdf I cannot comment on swapping the KX3 transverters from 2m to 4m, but I recall reading somewhere that it will not be a 5 minute job. I hope that helps. 73 de David G4DMP In a recent message, Dennis L. Haarsager haarsa...@gmail.com writes I have a couple of questions for Elecraft and for our UK friends. My wife and I make 3-4 trips per year to Scotland to visit family in the Borders and a vacation home in Clackmannanshire. So the new 4M module for the KX3 is exciting *if* I'm able to operate MM/N7DH on that band. Can anyone tell me if the fact that we don't don't have 4M privileges in the U.S. prohibit me from using the 70-MHz band in the U.K.? Also... I understand that the KX3 will accept only one of these at a time, but will it be fairly easy to swap the 2M and 4M modules when I travel and is it risky to other boards in the KX3 if I do this a few times a year? 73, Dennis Haarsager, N7DH -- David G4DMP Leeds, England, UK --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft price increase coming in April.
I am sure that if you e-mail sa...@elecraft.com and remind them, they will be pleased to oblige. In a recent message, W0FK llader...@earthlink.net writes Have any price inreases gone into effect yet? It doesn't appear to me that they have on the products I've looked at. 73, Lou, W0FK -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 manual .pdf edit requests
But bearing mind this applies to the USA. As the K3 is marketed worldwide, maybe all other countries' allocations should be included too. 73 de David G4DMP On 17 Mar 2014 17:09, Fred Jensen k6...@foothill.net wrote: The last sentence also needs to be updated. Permitted emissions are now USB, CW, and RTTY, however the FCC's bandwidth limitation on RTTY really means PSK31 and other narrow band digital modes, not 170 Hz 45.5 baud FSK. 73, Fred K6DGW - Northern California Contest Club - CU in the 2014 Cal QSO Party 4-5 Oct 2014 - www.cqp.org On 3/17/2014 7:13 AM, Sam Morgan wrote: here is another update that would be welcome: pg 40 says: The U.S. 60-meter channel assignments correspond to VFO settings of 5330.5, 5346.5, 5366.5, 5371.5, and 5403.5 kHz. USB is the only mode allowed on this band. I think the new frequencies are as follows: 5330.5, 5346.5, 5357.0, 5371.5, and 5403.5 kHz. David Pratt __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2
Why can't you use your K2/100 mobile, Harlan, that needs you to downgrade to a Kenwood? I have had no problem using my K2 /M. The internal ATU matches every whip antenna I have tried. 73 de David G4DMP On 18 Mar 2014 03:03, hsherr...@reagan.com wrote: Well Love my K2 (5XXX) but since I have my K3 and want to go mobile HF, have been looking for a TS480HX. Willing to trade K2-100, SSB from a non-smoking home. David Pratt __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 Extended VFO temperature compensation procedure
And well worth doing too. Drift from 2C to 45C is now less than 5Hz. 73 de David G4DMP On 18 Mar 2014 03:50, Phil Wheeler w...@socal.rr.com wrote: Done. It does take more than the nominal 30 min -- more like 90-120 min. But it's done. David Pratt __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Using the K3 remote
On 18 Dec 2013 06:40, W0WFH Bill w0...@yahoo.com wrote Please respond to me off forum. w0...@yahoo.com Please reply on here; I would be interested too. 73 de David G4DMP David Pratt __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] DL1 - Measuring Coax Loss
I am reluctance to reply on here as the reflector seems full of trash these days. But yes, John, I wholeheartedly agree with you; the DL1 is excellent and well worth buying at that price. Rated at 20W it is ideal for setting up the K1, K2, KX1, KX3 and K3/10. 73 de David G4DMP On 24/08/2013 13:28, John Oppenheimer wrote: How many of you have an Elecraft DL1? It's an amazing piece of test equipment for only $26 when coupled to an accurate DVM. -- - - - - - - - - - - - - - - - - - | David M Pratt, Kippax, Leeds, UK| | Website: http://www.g4dmp.co.uk | - - - - - - - - - - - - - - - - - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 ATU tuning improvements
I agree, John, I do find that my K3 does not appear to save its ATU settings and seems to do a complete retune each time I press the ATU TUNE button. 73 de David G4DMP In a recent message, John Oppenheimer j...@kn5l.net writes Will the recent KX3 ATU Improvements also be added to the K3? John KN5L * ATU IMPROVEMENTS: Tapping ATU TUNE now recalls stored LC settings for the current VFO frequency prior to tuning, avoiding auto-tuning from scratch in most cases. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Serial Number Data Base
In a recent message, Mark Petiford rv6am...@yahoo.com writes And the purpose of this database is...??? It gives and indication of those who are proud to be owners of Elecraft equipment compared with those who are merely 'appliance operators'. From: David Ferrington, M0XDF m0...@alphadene.co.uk To: Kenneth A Christiansen w...@i29.net Cc: Elecraft@mailman.qth.net Elecraft@mailman.qth.net Sent: Friday, June 14, 2013 8:10 AM Subject: Re: [Elecraft] Serial Number Data Base It's http://www.zerobeat.net/cgi-bin/k2data/db.cgi and there is an option for a KX3 73 de David, M0XDF -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KE7X KX3 book available
Does the book include the KX3 features yet to be implemented, including ESSB, CW on SSB mode and synchronous AM reception ? 73 de David G4DMP In a recent message, kk5na kk...@kk5na.com writes I received Fred's KX3 book today from Lulu. First impression: EXCELLENT!!! Joe KK5NA -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: Use VFO-B to select dBV
Bob - The K3 manual does not give as much detail as the KX3 manual which describes the functions as follows Audio Signal Level AFV. This display shows the approximate level of the audio output, prior to the AF gain control (in other words, the AF gain control has no effect on the reading). The reading will vary with preamp and attenuator settings as well as the RF gain control. AFV is normally used in conjunction with the dBV function. Relative audio signal (dBV). This display can be used to measure receiver sensitivity or gain/loss of various stages, or compare two signals. To use it, first select AFV and allow the voltage reading to stabilize. (This may not be possible with modulated or rapidly changing signals.) Once the signal appears stable, select dBV. You should now see a reading of around 0dBV relative to the last AFV reading. If you change the setting of the preamp or attenuator, you should see this reading change. However, it may not change as much as you expect unless you turn AGC off. (Be sure to turn AF gain down BEFORE turning AGC off, as the signal may become very loud.) Measurement of receive sensitivity (MDS) requires a calibrated 1-uV signal source such as an Elecraft XG1/2/3. These sources include instructions for measuring MDS. I hope that helps, Bob. 73 de David G4DMP In a recent message, KD7YZ Bob kd...@denstarfarm.us writes Not I am seeing 99.9dBV for an RMS reading of 1.09 A. This isn't too helpful though. Perhaps David can elaborate on how I get to a meaningful reading. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Lee's HiJack Mail
In a recent message, Paul M Dunphy pau...@ve1dx.net writes Yahoo emails seem to be the common denominator! AOL too it would appear :-( -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] SSTV on the P3
In a message on 17 August 2009, Wayne Burdick n...@elecraft.com wrote .. - We could display just about anything on the P3's LCD .. - I'd love to demodulate SSTV with the P3, and it's on the wish-list. .. I would be interested to know whether there is any progress on this. How far down the wish-list is SSTV ? 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] SSTV on the P3
In a message on 17 August 2009, Wayne Burdick n...@elecraft.com wrote .. - We could display just about anything on the P3's LCD .. - I'd love to demodulate SSTV with the P3, and it's on the wish-list. .. I would be interested to know whether there is any progress on this. How far down the wish-list is SSTV ? 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] 2m Transverter
Hello Dave - What I omitted to say in my msg on the reflector was that you WILL need the KXV3 installed in your K3. When I mentioned not needing the KXV3A I was making an assumption that your K3 already has the original KXV3 installed. Apart from the power cable the only additional cables you will need are a pair of BNC-BNC cables to connect the XV144 to the K3. You can drive the K3 with just 1mW of power from the XV144. I hope that helps. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] XV144 XV50: LED brightness
Thank you, Jim, that does make a great deal of sense. Many thanks for taking the trouble of replying. 73 de David G4DMP In a recent message, Jim Miller KG0KP jimmil...@stl-online.net writes [snip] There is no doubt that the LEDs they were getting in 2004 have been discontinued with brighter and lower current drain being the ones of today. [snip] - Original Message - From: David G4DMP [snip] The LEDs on the, later, XV50 are very much brighter than the earlier XV144. Both have exactly the same supply voltage of 13.95V. [snip] -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] OT: FCC Exams
Replied privately to cut down on off topic QRM In a recent message, Jim Lowman jmlow...@sbcglobal.net writes Actually, David, I'm interested in not only the UK exams, but also the callsign assignments; i.e. G vs. M vs. 2 73 de Jim - AD6CW On 9/1/2012 1:08 AM, G4DMP wrote: You may well apologise, Chuck, but as this is a worldwide reflector about Elecraft products and assistance, information about American license qualifications is of little interest to the rest of us. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Problem w/front panel switches
Phil - Have you tried re-installing the Front Panel firmware? Just a thought. 73 de David G4DMP In a recent message, Phil Debbie Salas dpsa...@tx.rr.com writes BTW - I can switch bands using the buttons on my KPA500, and it transmits fine. Just front panel button problems. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Kids.. O.T.!
There is an excellent book: Radio Rescue by Lynne Barasch, which is ideal for introducing kids of this age to the thrills of ham radio. It has several good reviews on the web and is available from Amazon. It's rather expensive new, but is available quite cheap as a secondhand item. It doesn't mention the KX3 though ;-( 73 de David G4DMP In a recent message, Dave KK7SS kk...@frontier.com writes After most of the day, my Grand-kids have just gone back to their mother. Itried showing them Ham Radio, my QSL cards and such. I did some SSB and a bit of slow CW. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Mics
I can never understand why people spend hundreds of pounds on Heil headsets and similar when inexpensive computer headsets give such good results. 73 de David G4DMP In a recent message, Graham Kimbell G3TCT g3...@lineone.net writes I have been using a computer style headset and mic bought from a rally for about £2. Reports have been very complimentary and it even has its own volume control. I just bought another one as a spare for £1. Can't get better value than that! -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] XV432 kit
In a recent message, Vic Goncharsky us...@yahoo.com writes Are XV432 kits still avaliable? WTB and assemble one before IARU R1 UHF championship in October Yes, Vic, you can see them listed at... http://www.elecraft.com/elecraft_prod_list.htm#xvs 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] XV432 kit
I see what you mean, Vic. I think your best bet is to e-mail Eric and ask him. He ought to make it clear on the website whether it's a kit or ready built. There should of course be a difference in price. Like you, I like building stuff, would not consider buying a ready built rig and was a bit disappointed there was not more detailed assembly required for the K3. I use an XV144 with my K2 and an XV'70' with my K3, both self-assembled. 73 David G4DMP In a recent message, Vic Goncharsky us...@yahoo.com writes Hi Dave, It doesn't say KIT in there, I checked this b4 writing to the reflector. 73 Vic -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Using the XV50 on 4 metres
I have recently modified an Elecraft XV50 external transverter for use on 4 metres and have prepared some notes on how I did it. These notes may be of interest to anyone who is licensed to operate on the 70 MHz band. http://www.g4dmp.co.uk/XV70mods.pdf 73 de G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3: Sub receiver question
I am using the internal K144XV 2-metre transverter at VFO B and an external XV50 (modified for 4 metres) at VFO A. Switching in the SUB I can hear VFO A (4 metres) okay but, although I can hear the K144XV noise level when advancing the SUB RF AF gain controls, I do not hear any signals. I do have a 2 metre antenna in the ANT3 socket. Am I doing something wrong ? I would have expected to be able to receive 2 metres and 4 metres at the same time. David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: Sub receiver question
Thank you, Olli, that is useful to know. 73 de David G4DMP In a recent message, Oliver Dröse dro...@necg.de writes Hi David, in standard configuration you can only use one transverter at a time, no matter if internal or external (the internal K144XV is switched from the same XV3A board as the external transverters). -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K144XV Utility for Mac (Repost)
In a recent message, Jim Bennett w6...@mac.com writes Please tell me that there really IS a Mac version of the firmware and where I can find it. Your original e-mail did appear on the reflector okay, Jim. I've had a look at all possible sources but, like you, am unable to find a K144XV utility for the Mac. There seem to be several difficulties that Mac owners have is updating Elecraft gear with the latest firmware that I feel a sensible solution would be to get a cheap basic Windows compatible computer for the purpose. Such a PC would only cost a few dollars and if you were in the UK I would gladly give you one. I won't say scrap the Mac, but you know what I mean. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 SVGA Mouse click tune
That is a good idea, Dale, and I would also find that useful. However, I doubt it will be possible as the USB connector is used for the keyboard. Using a USB hub on the P3 would certainly be a challenge for the designers. 73 de David G4DMP In a recent message, Dale Boresz d...@lightstream.net writes Any chance that the Keyboard connector on the rear panel of the P3 might one day support a mouse, offering point and click tune functionality? (point to the desired signal on the P3 using the mouse/cursor; click the mouse button; K3 tunes to that frequency; op uses K3 main tuning knob to tweak the tuning as needed) My operation is about 95% cw, and click tuning sure would make it easy to quickly get to a signal at the other end of the current cw band within the current 'span'. The same benefit would exist for SSB as well. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Macros
Toby - Are you referring to the K3, KX3 or the P3/SVGA/USB ? Please add this on the Subject line. I have successfully programmed Macros into my K3 from the USB keyboard, but I agree there are limitations with the documentation. However, do bear in mind that it is beta firmware and any observations should be set to Paul (pauls[at]elecraft.com) 73 David G4DMP In a recent message, Toby Pennington toby...@embarqmail.com writes I know this is an early version of the firmware, but I find getting the macros set up is not very user friendly or intuitive. Recalling what you have set up requires a cheat sheet. Two button pushes for a macro to come up seems to be excessive. Other opinions? Toby W4CAK -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3SVGA USB Keyboard
Mike - It sounds as though you have not read the PDF file that is contained within the P3/SVGA/USB beta zip file. That explains about the asterisk under the Status Bar paragraph and all you need to know to get it working. Read that, Mike, and preferably print it off and you'll be away. David G4DMP In a recent message, Mike K2MK k...@comcast.net writes Hi Rick, Yes I've tried PSK-D and FSK-D. And yes the keyboard caps lock light does go on. I'm not sure what you mean by an asterisk in the status box but no there is no asterisk on either the large monitor or the P3. I did plug and unplug the keyboard. I'm not going to pursue this further as I'm happy with PC software control of RTTY and PSK. I'll debug the problem later when the P3 is able to do some other interesting keyboard related things. 73, Mike K2MK -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Question on K1 build - internal or external tuner?
You will enjoy your K1, Stan; I built one many years ago and it went together like a treat. The only decision to make is which bands to install and which tuning range capacitor to use. But you can always change the tuning range later as both capacitors are provided in the kit. BTW, this not the KX1 forum. It is the reflector for all Elecraft products. Unfortunately, for those of us without one, the KX3 seems to dominate the reflector at present together with many off-topic issues. 73 de David G4DMP In a recent message, Stanton A. Bailey ae7...@gmail.com writes My apologies for putting this in the KX1 forum. It was late last night when I posted. It should be in the K1 forum. Got it ordered today can't wait to smell the solder cooking. I think I'm going to build it as is with the back-light. I'll mod it when it seems necessary. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Am I missing something?
4.51 is definitely there, Paul. Make sure your K3 Utility is pointing to the right directory. ftp://elecraft.com/K3/firmware/ 73 David G4DMP In a recent message, Paul VanOveren p...@nf8j.com writes I saw a couple of references here on the reflector about the 4.51 Beta firmware now being a production release. I do not see it on the Elecraft website under firmware category and I checked in the K3 Utility 1.12.3.28 ver.Mine reads MCU Installed 4.48 available 4.39 FPF 1.15 1.14 DSP 1 2.73 2.73 DSP 2 2.73 2.73 DVR 1.03 If I check versions available, it does not change. The K3 is communicating properly at 38,400 bps, running thru the P3. Anyone else see this. ??? NF8J Paul -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Buying a K3 in the UK?
Hear, hear. Dealings and service from Waters and Stanton leave a lot to be desired :-( 73 de David G4DMP In a recent message, Geoffrey Downs geoffre...@madasafish.com writes It's not necessarily excellent news for the UK. I for one would prefer to continue dealing with Elecraft rather than a general amateur radio reseller who is unlikely to be able to provide the high standard of technical and customer service that Elecraft provide. I am worried by that word exclusive in the Waters and Stanton announcement. I sincerely hope that it will not preclude UK customers who choose to do so from dealing direct with Elecraft like we have always done. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU 4.51
I have also missed the 4.51, and even the 4.50 release. The only beta file I can find on the FTP site is 4.48, but 4.48 has also been officially released. Has the FTP folder for beta releases been changed? David G4DMP In a recent message, Matt Murphy m...@nq6n.com writes I seem to have missed the 4.51 release, though I got 4.50. Would someone mind forwarding it over? Matt NQ6N -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] XG-3 - why RS-232
See many earlier posts about the relative merits of RS-232 and USB interfaces. They have been discussed many times before. If your desktop does not have a serial input, fit one. If you use a laptop or notebook computer, get a USB to RS-232 cable. 73 de David G4DMP In a recent message, Pete Smith N4ZR n...@contesting.com writes I have lusted after the XG-3 ever since it was released, but just noticed that it has an RS-232 port for computer connection. Why on earth not a USB port? -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3; Eric, Wayne, a feature for the wish list
Having said that, Adrian, so many people still call the K3 a 'radio' rather than a transceiver. In a recent message, Adrian vk4...@bigpond.com writes Yes Gary, Elecraft made the K3 CB Proof, lets keep it that way, no roger beeps thanks. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2-Using a paddle and straight key at the same time….how?
Steve - Look at page 99 of the latest (Rev H) manual. The section on CW Operation shows how the two keys may be connected at the same time. You might find that a small capacitor connected across the straight key necessary depending on how much RF you have flying round the shack. 73 de David G4DMP In a recent message, Stephen Roberts steve...@shoreham.net writes I'd like to keep both keys plugged into the K2 at the same time. How should I go about that? -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Problem with Elecraft's built in 2 meter
In a recent message, Julie Royster jsdroys...@bellsouth.net writes Larry K4MWE and I are hearing lots of distortion (clipping probably) on the K144XV tuned to local repeaters for anyone with strong signals. Weak stations are OK. Julie - What you say suggests that the strong signals going through the repeater are the problem if the weaker ones are okay. Perhaps those strong stations are over-deviating and are hence being clipped by the repeater's receiver. The K3 is a precision transceiver so maybe the fault lies with remote transmitters. I presume you have your AGC on the K3 correctly set. No problems with 2 metre repeater use with my K144XV here, nor with repeaters on 6 metres. 73/88 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KAF2 or KDSP2 for K2?
Just my opinion having used both, Steve, but if you are primarily a CW operator I think you would be better off with the KAF2. 73 DE David G4DMP In a recent message, Stephen Roberts steve...@shoreham.net writes Well going from a rather ancient Ten Tec to a K2 has been a real treat for sure, and as most of us can't seem to be able to leave anything well enough alone, I was thinking about possible options I can add without breaking the bank. Can any of you folks tell me the real life difference between these two options and whether or not either one of them is worth the expense? I do almost no voice...all cw. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: Terminology
Another thing that make me cringe is the use of 'radio' to mean a transceiver or rig. I first heard this on CB like 'keying the mike', long before CB was around in the UK. I remember Eric saying that the XV144 would work on any radio. I could never get it to work on my old Philco. For heaven's sake, don't let anyone use a 'rubber duck' on the KX3 ;-( David G4DMP In a recent message, Ron D'Eau Claire r...@cobi.biz writes Way back in the early 1950's, I learned that to key meant to close the (telegraph) key to activate the transmitter. Keying a rig is what one did when sending CW. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] XG3 KEYING
In a recent message, Paul Saffren N6HZ pa...@elecraft.com writes Unfortunately there is no way currently to key the XG3 directly from an external key or keyer. currently, Paul? Does that imply that there could be a means of externally keying the XG3 in the future? 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX1 Wanted...
I whole heartedly agree with your there, Dick. Unless one has physical shortcomings, it is much better to build one's own Elecraft equipment. This is borne out by many elementary questions appearing on the reflector from people who have not assembled their own gear. Had they built it themselves, the questions would not arise. 73 de David G4DMP In a recent message, Dick Dievendorff die...@comcast.net writes I'd encourage you to build the kit. A good part of the joy of the K1/KX1/K2 experience is building the kit and bringing a radio to life from a collection of parts. And then later when you use it, it just feels different if you've built it yourself. You're missing a bunch of the fun if you buy it already assembled. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft CW Net cancellation
In a recent message, David Gilbert xda...@cis-broadband.com writes I'd offer the opinion that crisp operating practices learned in contesting beat casual roundtable chats with friends hands down. Crisp they may be, but at least with roundtable chats you do get genuine reports. This 5NN stuff really does put me off contests :-( 73 -- David G4DMP Leeds, England, UK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] New 472kHz LF band
I see from the report of WRC-12 that a new band 472-479kHz is to be allocated on a world-wide basis with an eirp of 5W (1W in some countries). The K3 receiver currently goes down to 490kHz. Is there any likelihood that this could be extended down to cover the new band? http://www.rsgb.org/news/articlelinks.php?id=0284 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] New 472kHz LF band
I very much doubt that Elecraft would be interested in producing such a device, Trevor, particularly as similar VLF up converters are already available. My query was really questioning whether the existing K3 could be adapted for the forthcoming new band. 73 de David G4DMP In a recent message, Trevor Smithers tsmith...@cix.co.uk writes how about an Elecraft designed, fully filtered, fully integrated, high stability, VLF up converter covering 5KHz to 500KHz. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] fists?
In a recent message, Jim Miller j...@jtmiller.com writes can't reach the fists.org website. anyone know what's up? Try http://www.fists.org.uk Jim. That works okay here. 73 de David G4DMP Fists No.: 13240 -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Dead 40M
Try pressing ANT. It looks as though you have the wrong antenna selected on 40 metres. 73 de David G4DMP In a recent message, Dave Zeph ze...@indy.rr.com writes Does anyone have an idea what might have gone bad and if when can be done to identify the problem. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Tuning AL-811H
A 2-tone test is already built into the K3, Matt. I'm afraid it's a case of RTFM. Enter the Config menu and look for 2 TONE 73 de David G4DMP In a recent message, Matt Murphy m...@nq6n.com writes If using a two tone oscillator is the best way to tune a tube amp, would it be possible for the K3's firmware to generate this? -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K-3 Serial Nrs.
Unfortunately, Dwight, the previous owner has not added #3095 to the Elecraft Owner Database at http://www.zerobeat.net/qrp/elowners.html There are some near that serial number dated around May 2010. I hope that helps. You might like to add yours to the database. 73 de David G4DMP In a recent message, DGB ns9i2...@bayland.net writes I've bought a used K-3 (hasn't arrived yet) with the serial # of 3095. About what is the date of manufacture? 73 Dwight NS9I -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 12v ERR - Deoxit
I have never had such problems with my K2 which uses a front panel/control unit coupled to the main board with connectors. It does seem a design modification is desirable for the K3. 73 de David G4DMP In a recent message, Gary VK4FD garyvk...@gmail.com writes With several known issues with corrosion or bad contact being made with the numerous connections in the K3, I am wondering what could be done differently at manufacture that might alleviate some of these issues at least? I wonder if there different types of connectors out there that are perhaps less prone to what we are seeing? -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Firmware
Richard - If you have deleted yesterday's messages you can always check back by looking at the archives. Details are on the Elecraft website. 73 de David G4DMP In a recent message, Richard Thorpe kis...@me.com writes Did I read on the reflector that there was to be a K3/P3 firmware upgrade yesterday? Thank you. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Prosign IM to end K3 RTTY idle not working: Solved
In a recent message, Don Wilhelm w3...@embarqmail.com writes You send the AS prosign as didahdididit, KN as dahdidahdahdit, etc. Forgive me for making a slight correction to that, Don, but KN is not a prosign but is defined as a left-hand bracket in the latest recommendations of the ITU. The latest definitions were prepared primarily to include the Morse code sequence for @ (prosign AC). http://www.itu.int/dms_pubrec/itu-r/rec/m/R-REC-M.1677-1-200910-I!!PDF-E.pdf Consequently, K N should really be separated by a space. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] New product opportunity
The K1, K2 and XV series of transverters were a distinctive dark grey (gray) by which the mojo Elecraft products were easily identified. Unfortunately, things turned to black when the KX1 was introduced. Despite black often being associated with death, Elecraft gave its reasons at the time. Personally I was sorry to see the change to black which makes the equipment less distinguishable from the opposition. On the other hand, as far as coordinating with the decor in you shack, one could say that black goes with anything (except black). 73 de David G4DMP In a recent message, GW0ETF gw0...@btinternet.com writes Or how about a selection of colours other than boring black for everything? I can then co-ordinate it all to the decor in my shack. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 PS-1229 Battery???
Nidge - I have recently bought a Power-Sonic PS1221 12V 2.1Ah battery from www.battery-force.co.uk It is physically the same size as the PS1229 but of lower Ah. It works perfectly in my K2. It will cost you 15.44 including vat and PP. 73 de David G4DMP In a recent message, Nigel (Nidge) Smith nig_sm...@o2.co.uk writes I'm trying to find a supplier in the UK as I expect shipping from Elecraft direct will be a bit high, my order last week for a speaker and some screws notched up a whopping $28 shipping bill. The likes of RS have it listed but discontinued and I expect Powersonic UK will only be interested in multiple orders, I have emailed them anyway. I know that there are cheaper Yuasa NP2.1-12 (2.1Ah) batteries but these are apparently spec'd for standby use for Alarm units and such, other than that the largest capacity I can find is 2.3Ah. Would the 0.6Ah difference make a difference?? If anyone in the UK uses their K2 with an internal battery what would your recommendations be. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] TMP Connector Source
Bob - Try http://www.inrad.net/product.php?productid=336cat=163page=1 It seems that plugs are available in packs of eight for $6. 73 de David G4DMP In a recent message, Robert Dorchuck W6VY w...@yahoo.com writes There was a thread last year looking for a source of TMP connectors. Did anyone come up with a source in small quantities at a reasonable price? I did not see any answers. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 - Know bug?
I am getting a 'feature' with my P3 when using RIT. I find that the RIT frequency deviation displayed on the P3 is twice that of the RIT deviation displayed on the K3. As far as I am aware I have the latest firmware installed on both my K3 and my P3. Is this a know bug or do I have a fault in my K3/P3 installation? Sorry if I have missed it if it has been discussed on here before. 73 de David G4DMP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 - Know bug?
Yes, quite sure, Joe, and I have had off list replies from others who are finding the same anomaly. David In a recent message, Joe Subich, W4TV li...@subich.com writes Are you sure? Just checked mine (FW ver 1.09) and the RIT and XIT calibrations are correct ... move RIT or XIT 2.00 KHz and the (red) cursor is 2 KHz away from the green cursor. 73, ... Joe, W4TV On 10/31/2011 1:50 PM, David Pratt wrote: I am getting a 'feature' with my P3 when using RIT. I find that the RIT frequency deviation displayed on the P3 is twice that of the RIT deviation displayed on the K3. As far as I am aware I have the latest firmware installed on both my K3 and my P3. Is this a know bug or do I have a fault in my K3/P3 installation? Sorry if I have missed it if it has been discussed on here before. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 - Know bug?
P3: 1.09 K3: 4.42 In a recent message, Joe Subich, W4TV li...@subich.com writes What version of the firmware? It is quite repeatedly correct here. 73, ... Joe, W4TV On 10/31/2011 4:58 PM, David Pratt wrote: Yes, quite sure, Joe, and I have had off list replies from others who are finding the same anomaly. David In a recent message, Joe Subich, W4TVli...@subich.com writes Are you sure? Just checked mine (FW ver 1.09) and the RIT and XIT calibrations are correct ... move RIT or XIT 2.00 KHz and the (red) cursor is 2 KHz away from the green cursor. 73, ... Joe, W4TV On 10/31/2011 1:50 PM, David Pratt wrote: I am getting a 'feature' with my P3 when using RIT. I find that the RIT frequency deviation displayed on the P3 is twice that of the RIT deviation displayed on the K3. As far as I am aware I have the latest firmware installed on both my K3 and my P3. Is this a know bug or do I have a fault in my K3/P3 installation? Sorry if I have missed it if it has been discussed on here before. 73 de David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Second Configuration
It already is, Jim; it's called the K3, currently available for immediate despatch. For QRP, order it without the 100W PA. Or maybe the K2 if you prefer to build it yourself. 73 de David G4DMP In a recent message, Jim Stoneback jstoneb...@comcast.net writes I'm wondering if there is any chance that the KX3 might be offered in the more traditional desktop configuration i.e. user interface on a front panel, connectors on the back? This would be for those of us not interested in a trail-friendly package but rather a small high performance home station QRP rig? -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA3 Rev. B schematic ?
I would be interested in this too, Win. The schematics file of 11-Oct-2007 has Rev XK and the files of 13-Jan-2010, 17-Jun-2010 and 30-Oct-2010 all have the schematics of KPA3 Rev C, but Rev B is missing. I wonder whether Rev B is the same as Rev XK ? 73 de David G4DMP In a recent message, Win Kriegl DK9IP/KH7CD dk...@dk9ip.de writes I can´t find the schematic for KPA3 REV B in the download area. Anyone has the schematic for me pse ? -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 Crystal Grounding Leads
FWIW, I have always found it useful to scratch the surface of the crystals and tin them prior to mounting them on the board. It clears any tarnishing of the cans between time of manufacture and assembly and makes soldering easier. 73 De David G4DMP In a recent message, Don Wilhelm w3...@embarqmail.com writes I find it is easy (even in the close quarters with the R-Paks) to solder the wires to the crystal cans after the crystals are mounted. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Owner's Manual
I see that Revision D10 of the K3 Owner's Manual is now available for download. Before I print it out, one someone care to advise up to which K3 firmware revision is included in the Manual ? Many thanks David G4DMP -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html