I am also in the market for the Cady K3s/P3 hard copy book if anyone has one
excess to their needs.
I have a Cady K3 hard copy book that is excess to my needs.
Earl N5ZM..
-
On 5/27/2020 7:27 PM, w4sc wrote:
The hard copy K3S and P3 book is not available from Elecraft
Elecraft KPA500 Amp and KAT500 Tuner Combo has sold. Thanks for all the
inquiries.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
.
Will include extra Y-adapter
Key Line interrupter
Original manual
KAT500 Automatic Tuner S/N 1004
Original manuals
All cables included for both
$2,200 for the pair plus shipping cost to you in USA.
Please reply direct to: n5zm at adxa dot org
Earl N5ZM
on.
Is there a setting, that I can't find, to not have the KPA500 turn on
automatically.
I have looked through both config menus and manuals also Fred Cady's book for
the K3.
Thanks in advance,
Earl N5ZM..
__
Elecraft mailing list
Home: http
Thanks for the info Ed. Stay safe.
Earl N5ZM..
On 10/10/2017 1:01 PM, Ed Muns wrote:
Fortunately, we live 60 miles south of San Francisco and the fires (so far) are
north of the city. Drift smoke is down though and we woke Monday to its smell.
Shouldn't taint the remaining fruit we're
Any report on ED W0YK?
On 10/10/2017 11:56 AM, Fred Jensen wrote:
Elecraft is in Watsonville CA, a bit inland from the Monterrey/Santa Cruz
area [and famous for artichokes]. The SoCal fire(s) is/are east of Los
Angeles, about 350-400 miles south. The NorCal fires are in Sonoma and Napa
Are there any K2 owners in the Edmonton area?
Please email me at ve6...@shaw.ca
Earl, VE6ERL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
wasn't expecting it today. :-))
73, Earl N5ZM..
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
My 20 KW whole house Generac runs on natural gas.
Earl N5ZM..
On 7/24/2014 7:40 PM, K8JHR wrote:
How much fuel do all you guys with whole house generators keep on hand?
How much fuel does one need to, say, go for 10 days? Does everyone have
that on hand?
What next, if you run out of fuel
Hi;
I have K2 ser. # 5621 and the KPA 100 which was working perfectly.
Now when I push the ptt switch on the mike, I get no indication of output
either in high power or low power.
The ammeter on the p/s does not move.
Does someone have an idea where to check?
Earl, VE3VI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
.
Earl VE7Qj
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Monday, April 16, 2012 10:18 PM
To: Earl Richardet
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K2 Audio Level using filters
Earl,
It does sound like you have a problem with the filter switching
and of course what you did to resolve.
Thanks and Regards,
Earl VE7QJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I've just completed the build on my internal K2 ATU. I'm at the point of
performing the CALn Bridge Null Adjustment. Following the procedures I am
unable to get any result other than HI unless I turn the power practically
down to zero. Turning the power to zero I can get a reading close to 020.
Thanks to Elecraft for providing 50 to 60 hours of great fun and
entertainment with some trepidation while building my new K2 transceiver.
Everything went well in the first phase of the build, only to be challenged
with a few issues in phase II. After about 5 hours of troubleshooting with
the
I have the following options to build for my new K2 and I would be
interested to know if there is a preferred order of build.
The options are:
KNB2 Noise Blanker
KSB2 SSB Adapter
KAT2 Auto Antenna Tuner
KDSP2 DSP and Audio Filter, Clock
Thanks,
Earl VE7QJ
Hello all,
I'm in the process of building a K2 and have run into and unexpected result.
I have just completed phase 2 of the build and I'm doing the testing and
alignment. Specifically, I was performing the PLL Reference Oscillator
Range Test.
The following results are what I got.
grounding/ESD
protection and keeping everything at the same potential while handling the
PCB's.
My question, is there anything in particular that I should be aware of doing
this change out that may not be as clear as it needs to be for a beginner?
TIA, 73 Earl N5ZM
before putting it all back
together.
Again many thanks to all,
Earl N5ZM..
On 9/26/2011 4:18 PM, Earl wrote:
Hi All, I just received my K3DSPUPGD board. My K3 (#3223) is a Factory built
unit. Therefore I have no experience at dismantaling and re-assembing the
radio. I have an Anti-Static Mat
Thanks Fred, that's what I call service.
Earl N5ZM..
On 7/18/2011 5:15 PM, Cady, Fred wrote:
I have posted on www.ke7x.com a change note for The Elecraft K3:
Design, Configuration, and Operation that describes the new L-MIX-R
audio mix choices and how to program a function key to change from
now default? I would hope not.
Earl N5ZM..
On 10/22/2010 1:34 PM, Dave Hachadorian wrote:
Do you change bands or modes using quick memories or M1-M4?
Maybe you accidentally saved 75 baud in memory, and that's why
it keeps coming back.
Dave Hachadorian, K6LL
Yuma, AZ
-Original
Got it! - Done!!
Thanks Wayne..
Earl N5ZM..
On 10/22/2010 9:10 PM, Wayne Burdick wrote:
New K3s all have 45 baud as the default for all memories. K3s that
were built before the associated firmware change may come up at 75
baud, requiring a one-time, per-memory or per-band change back to 45
Is there a way to tell which chipset is used in the KUSB I purchased in June
2009??
Earl N5ZM K3 #3223
Brett Howard wrote:
Whatever you get just make sure it has an FTDI chipset to minimize
your issues. The ones that Elecraft sells now *ARE* using this
chipset. They used to use
and back on. Sometimes more than once.
Earl N5ZM K3 #3223
Dick Dievendorff wrote:
The Windows Device Manager can be used to examine the device's
Manufacturer.
K3 Utility Help has a Troubleshooting USB to Serial Adapters page that
includes information on how to access this information.
73 de
I have K2/100 ser. 5621 which has bee working perfectly but suddenly began
giving a hi cur msg.
The output on the Bird 43 shows 15 when set to 7 and 75 to 150 when set
anywhere between 50 and
100watts on all bands. I have measured voltages on the KPA100 and so far found
that U1-21 and,
of
Try the AES, HRO stores etc.
Earl N5ZM..
Phil Hystad wrote:
Just checked and they seem to be back ordered. I wonder how long the wait
is. Maybe this is the Christmas rush.
But, does anyone have a switch setup or configuration for feeding multiple
rigs into one set of speakers. My
I have used the 'COMspkr' from West Mountain Radio for 4 months now with
no problems. Even at times using 1500w RTTY or CW. They are stereo
(Amplified) and a nice match to the K3.
Usual disclaimer, no connection, just a satisfied user.
Earl N5ZM
disappears, but I can get it back by
manually moving the Shift Control to 2.20.
I have compared all my CONFIG and MAIN settings with a local with a K3
and they pretty well match up.
Any ideas??
Earl N5ZM..
__
Elecraft mailing list
Is anyone using the West Mountain Radio 'COMspkr' with their K3.
Comments??
Earl N5ZM #3223
--
Earl F. Smith - N5ZM
PO Box 20065
White Hall, AR 71612-0065
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
is BBB. The green LED's on the MK are flashing with the FSK output
it is just not making it to the radio.
TIA for your help.
Earl N5ZM
--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Received K3/100-F S/N 3223 today. Now the fun begins!!
Earl N5ZM..
--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
with the KPA100 or can anyone give me any ideas
how to correct this?
Thanks, Earl
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
change and therefore
the K2 would not turn on an amplifier (which I dont intend to use, but) it
doesnt work. Anybody have any ideas ??
Earl
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
don't need a receiver with
that! I will have a K3 but after the SteppIR
For the other side of the pasture give me a call now and again, yes, Morse
73
Earl W7TK Hansville WA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
was ever better to my taste
73
Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help
Howdy! Cash squeeze got me so will unload some goodies. Knock your eyes out
on brand new never used K2 #5784, put together beutifully by WA2TKG, gave
Elecraft $1400 for the box and all that is in it. Talk about mod units and
dicker on fone 360 638 2707 Pacific. Need strong local boys for a
but leave them to
the first post mortem digger!
73
Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
and pay their tabs individually. There is no fee to attend.
To ensure adequate seating if you plan to attend, please contact me at
[EMAIL PROTECTED]
Information on Convention activities may be seen at
http://www.dxconvention.org.
73, de Earl, K6SE
the
power with the wrong polarity, pop goes the radio!
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
R1 in the KSB2
module from 1K to 10K ohms. This was all I needed to do to correct the
problem.
I now receive on-air reports of superb audio when on SSB with my
K2/100.
73, de Earl, K6SE
K2/100 #2622
___
Elecraft mailing list
Post to: Elecraft
Congrats on a half-century in Ham Radio, Vic (K2VCO). Here's to 50 more
for you!
73, de Earl, K6SE (first licensed June 1955)
K2/100 #2622
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
in my head -- is this right)?
==
I don't know what the FS reading of the W1 wattmeter is, but 5 watts +/-
0.5 db would be 4.456 to 5.61 watts, or -0.544 and +0.61 watts.
73, de Earl
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
of other 2Ns which gives a lower resistance but I still cant
get it to zero (in other words ground the relay contcact) to switch the relay.
The amplifier relay runs 12V which is the stated upper limit of the keying
circuit.
Any help would be appreciated,
73 de Earl
at the antenna feedpoint into 12 turns, 12 inches in
diameter.
For transmit antennas, the same method may be used, or a 1:1 balun may be
installed at the feedpoint.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
500 Hz away,
clicks heard outside of your receiver's passband are quite prevalent.
This problem has abated somewhat in recent years because the ham
community has been made aware of it via the many ham e-mail reflectors
and many owners have performed click mods on their rigs.
73, de Earl, K6SE
signal) with one of their products and they
promptly did something to cure it (plus a multitude of other K2
improvements they did).
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
but cant locate any notes on
it.
I wonder if anyone else has had this problem or can offer any suggestion.
Thank you de Earl
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Same with mine. I cant even get it started, seems to be a little for the
antenna jack
Earl
Michael Cook wrote:
Hi all. I've been assembling my K2 since thursday and having a ton of
fun. Last night I just finished the last assembly steps and I'm about to
move on to the third set
bulletin is free via e-mail to
members.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
What nobody has mentioned in this thread about the Elecraft solid state
amps is that the output circuit is not only autotune, but there is also a
built-in antenna tuner. Alpha and Acom can't match that!
Saw them at Visalia last month and am eagerly awaiting their sales debut.
73, de Erl, K6SE
Lou wrote:
...but the Elecraft will only match 3:1 at 1500 watts, not a lot of
room.
==
It means a lot when you consider that the Alpha and Acom amps fault at
2:1.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
Tom, N0SS wrote:
On Wednesday [of next week - sic], at two minutes and three seconds after
1:00 in the morning.
The time and date will be: 01:02:03:04:05:06
This won't happen again for a thousand years.
==
My calculations say it will happen every 100 years.
73, de Earl, K6SE
where Mike Mraz, N6MZ, will give a presentation about the 160-meter
aspects of the FT5XO and 3B9C DXpeditions.
Information on Convention activities may be seen at
http://www.dxconvention.org.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft
My first SSB QSO with my 10-watt K2 was with a DX station who said he
wouldn't have picked me put of the pilleup except for my excellent
audio.
I was (and still am) using the Heil HC4 dynamic mike element which I
retrofitted into my old station mike.
73, de Earl, K6SE
K2/100 #2622
Timothy, KG6RII wrote:
anyone have another solution for attaching my K2/100 to my computer? Is
there anything cheaper than $132.54?
==
Search the Web for usb to serial adapter and you'll get many hits for
much, much cheaper than that.
73, de Earl, K6SE
for klix, the K2 with the click mod is
the cleanest of all. I believe the click mod is now incorporated in all
new K2 kits.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
their P.S. near to their antenna and
then they'll change their mind.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
test stands for contest. This past weekend was the annual CQ WW
160-meter contest. Lots of fun!
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
Of course it is!!
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
PSK20m unsused,nary a scratch on case
Special P38 long board for CloverThe ham who invented it used to live just
miles across the water. Hi died, my QSO ended. with manual. FREE to who
will pay the postage. No mods made to board.
73 Earl Bailley W7TK
Ci, WU7R wrote:
Where is the poll on the website? It has smuch stuff, I can't find
the page to which you refer
==
It's on ARRL's home page (http://www.arrl.org). Scroll down the page
about 50% and on the right side you'll see the box labeled ARRL Web
Survey.
73, de Earl, K6SE
too
outlandish.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
will start out by renting the use of a
crane.
One last hurrah for the K2, I lilked it best of all the CW rigs I have used
in almost 70 years of Morse.
73, Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
other contests). I always admire
the other operators in the CW SS for their CW skills and it's always a
pleasure to make an exchange with them.
Wow! The skip sure was short (as well as long) on 15m Sunday, wasn't it?
73, de Earl, K6SE
___
Elecraft
638 2707 9a to 9p pacific
Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Loaded with goodies professionally done. KK7UQ interface for PSK.Cables
included.
Give me a reasonable offer and I'll pack and ship to your requirments.
73 Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
.
As for propagation via aurora on VHF, the difference was startling. The
rapid doppler shift rendered SSB signals unreadable while CW signals were
still quite readable despite the buzz saw sound of their signals.
73, de Earl, K6SE
___
Elecraft mailing
, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
's frequency dial readout accuracy.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
), but
the procedure is in the manual, and it works!
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Late serial K2 with most accessories for sale at Elecraft prices.
Perfect condition electrically and physically
Telephone for full information 9a to 9p Pacific 360 638 2707
73
Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
power SS units.
73 Earl W7TK
360 638 2707 9A-9P Pacific
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
to Washington video.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
--
I am using the free version of SPAMfighter for private users.
It has removed 347 spam emails to date.
Paying users do not have this message in their emails.
Try www.SPAMfighter.com for free now!
___
Elecraft mailing list
Post to:
antennas come
into an antenna tuner located in the shack are probably more cognizant of
the problem.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
then I've used a headset with a 1/8 (small) plug with my K2 and
the problem has not repeated.
73, de Earl, K6SE
K2/100 #2622
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
and the other has a 402BA at 75
feet. The towers are spaced 135 feet (which is 1/4-wave on 160m and
1/2-wave on 80m) and are used as a switchable-direction phased array on
those two bands.
Each tower has its own ground radial system of 96 radials, each 125 feet
long.
73, de Earl, K6SE
I dont seem to be able to mail to list.
This is just a test
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
it to decrease it's resistance a bit, which will increase the S-meter
sensitivity.
After adjusting R1, you'll have to go into the menu and recalibrate the
S-meter hi and lo settings.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
and both manuals.
Price is US$1,125.00 plus shipping from Ontario
Thanks for looking.
Earl, VE3VI
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
Jerry, NR5A wrote:
Why??
==
Because there's thousands of hams like KI4GIN and me who like bells and
whistles and are willing to pay for them..
It may not appeal to NR5A and others, but there's a BIG market that it
WOULD appeal to.
73, de Earl, K6SE
of the DX convention there April 15-17, 2005.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
on this reflector.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
this year.
I'm sure Eric will announce the details soon on this reflector.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
to the
shack and, as the saying goes, Good enough for government work.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
meaningful. As it is now, they are useful only
for reference readings such as when someone does an A/B check on his
antennas with you.
BTW, the values I posted originally were with the receiver preamp turned
off in all cases.
73, de Earl, K6SE
___
Elecraft
to start working on antennas If you have
finsihed yours come help me with mine.
73 Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
as a ham (first licensed as W8DGP in 1955 -
Extra Class since 1963).
Newbie???
73, de Earl, K6SE (not a vanity callsign)
K2/100 #2622
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
address because I have never searched the Web for a toroid winding
machine nor have I ever visited any spammer's Web site.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
I just received the following e-mail about a toroid winding machine.
Perhaps it may interest some of you Elecrafters. It was spam, so take it
for what it's worth.
73, de Earl, K6SE
- Forwarded message --
From: Jack Feng [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Wed, 13 Apr
, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
to the other.
indicating we really did it
Who ever said you could have this much fun when you got old?
73
Earl W7TK
Make me an offer on My Icom 756PROII. I'd like to stack a SteppIR and run 2
watts.
___
Elecraft mailing list
Post to: Elecraft
transmitting
on the K2 with amp. It sounds like noisy sidebands on the transmitted CW
signal.
With my K2, the problem occurs on all bands. It doesn't occur when I use
any of my other transceivers (IC-756Pro3, FT-1000MP, TS-830S).
73, de Earl, K6SE
___
Elecraft
is on a 110
VAC line.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help
the small K2 or its PLL components. It is felt that the inductor
in the K2's PLL circuit is picking up the hum. Perhaps Wayne/Eric can
try using a different inductor (wound differently, shielded, whatever) to
cure the problem.
73, de Earl, K6SE
___
Elecraft
noise (which it isn't). I consider the
topic has never changed.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
. W4FMS did try it and it worked for him.
The noise source you refer to is the magnetic field from the linear's
HV xfmr.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
too much of it but if I hear 'em
I can work 'em. And I have no goals for numbers or contests, I just like to
chat.
73
Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
Is there a published list of qrp CW freeks for the various bands. If a window
would appeciate that too.Not into contests, just love o chat.
73
Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
everything including
cartwheeels. I'm gonna get another. Considering the fact the it lived
otdoors for five years is pretty good in my book. Undecided whether go for
a model that must live inside.or not as may want to try the K2 100w amp on a
different QRP rig.
73
Earl W7TK
1 - 100 of 124 matches
Mail list logo