Ser #893 comes up with ERROR DSE when turned on.
I connected via the Utility software and tried to load all new FW but I get
an error...no echo d and it goes into lockup.
Repeated this several times before I noticed the FW 5.26 is loaded as is
the mcu but it is showing question marks for DSP1
Reading the Sherwood tests today I noticed the K4D tested ranked below the
K and K3s and I started to look at the data published and I am still a
little unsure of why it scores lower having assumed it would be
significantly better in performance over the K3 and K3s.
Perhaps somebody could point
OK, I operate portable and often at night and lighting has to be managed to
reduce critters of the night dive bombing me when operating.
Wearing a head mounted light causes the critters to go into a frenzy so
does not help.
I often wonder what it would be like If the buttons and/or knobs could
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Wayne,
You missed the "also tunes the famous Rabbit Proof Fence" which we have
down under...2,023 miles"...:-)
Ask me how I know
Gary
K3NHL VK1ZZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
lol, well perhaps I should put this in simple perspective: Figures are
Australian Dollars which can be made to look like Banana
republic pesos..TIC ok
Purchase price K4D in AUD $6,850.00
freight in USD $ ?
10% GST on both K4 plus freight: minimum $685.00
total Minimum Cost landed will be
Was there a reason why the K3s was discontinued?
Looking at the pricing for a K4 was a shock in itself, when I did the
numbers to convert to AUD I was floored. That is one great beast BUT too
far out of my price range sadly.
As one who normally does not buy unwanted used equipment, I was hoping
om my iPhone
> ...nr4c. bill
>
>
> > On Apr 20, 2017, at 6:26 AM, Gary Gregory <vk1zzg...@gmail.com> wrote:
> >
> > Just installed a new KSYN3A in a K3 Ser # 5387, display shows SYN 1 OK,
> > Preamp 1 works but Preamp2 is showing OFF.
> >
> >
Aha, this one has the KXV3A, so no preamp 2.
Forgot mine has both son all good, will tell the owner when he arrives.
Gary
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Just installed a new KSYN3A in a K3 Ser # 5387, display shows SYN 1 OK,
Preamp 1 works but Preamp2 is showing OFF.
Did I miss something?when I move the VFO to change to ON, it displays
N/A
Must be late and not enough coffee?
Any advice would be appreciated.
Gary
Will take food stamps to feed my habit too?
:-)
On Mar 18, 2017 9:41 AM, "Roger Meadows" wrote:
> I’ll be one of the first in line to buy one of the trade ins…..
>
> On Mar 17, 2017, at 6:09 PM, Bill Johnson live.com>> wrote:
>
> I echo
Enquiring minds need to know?
Well maybe not all, but I do:-)
Gary
On Dec 24, 2016 8:51 AM, "Brian Hunt" wrote:
> The original K3S FAQ listed an upgrade K3S DSP board that could be used in
> the K3. Upgrade is to the audio preamp and output stage. FAQ indicated it
Issue not seen on mine. Had it since January 2007 so maybe you have an
issue?
Gary
On Nov 13, 2016 11:59, "WILLIE BABER" wrote:
> My 2014 purchased K3 is 20-25 watts low on 14mhz but all other bands are
> good. just haven't worried about it as I normally use 50 watts
What he said
Has got me rethinking my approach somewhat.
I still believe I have the optimum transceiver (k3) available given I will
never rely on software to control my dx chasing.
Gary
On Oct 28, 2016 05:55, "Lewis Phelps" wrote:
Al, thanks for a very informative and helpful
Got an interesting anomaly with KAT500 #007
Without making any changes to settings, cables, movement of equipment,
AuxBus or RS232 cables etc, it now has stopped "following" on QSY.
Band changes are working, first Dit will set tune to stored memory, checked
the KAT500 utility, boxes for QSY/Tune
OK. I'll admit to being confused. If there is no delay (Press and HOLD M!
if that is where I placed my voice recording) why would you NOT want a
delay, which is adjustable?
If there is no delay, how do I answer your call?you will be
transmitting again so will not hear me?
When contesting, I
Hm...can you now say Flea Power?
:-)
Gary
On 27 June 2016 at 03:13, Nr4c wrote:
> I was informed just now at the Field Day Site that I have a bug in my
> radio, s/n 4536. It appears to be crawling around in the LCD display.
>
> Is DDT available anymore?
>
> Sent from
I was searching the Elecraft website and was unable to find much
information on the SP3.
Did I miss something?
I found the cost and a nice photo but wanted some more detail such as specs.
Gary
--
*Gary - VK1ZZ, K3NHLSkype: Gary.VK1ZZhttp://www.qsl.net/vk1zz
or Tap the PWR button the kpa500 and watch the digital display on the
amplifier.
Gary
On 16 June 2016 at 13:50, Jack Brindle wrote:
> Fred’s assessment is correct - the output power resolution below 25 watts
> is pretty low. But it is still putting out power, at least to a
Just tried Tom's latest software. HA, I didn't read the documentation fully
obviously and discovered I could not use the panadapter display without
having LP Pan or a Softrock or a P3.
I have a sound card and incorrectly assumed I was good t go, dear oh dear,
must be getting older by the day at a
Even in The Land Downunder it works as expected.
Gary
On 31 December 2015 at 08:28, G4GNX - Alan
wrote:
> It's working just fine for me in the UK.
>
> 73,
>
> Alan. G4GNX
>
> -Original Message- From: JJ Sent: Wednesday, December 30, 2015
> 9:56 PM To:
Seasons greetings one and all.
Has anyone used/using the Koss SB45 headsets on their K3?
I have the CM-500 and I am on my second set but again the padding is
starting to deteriorate so before they look too ratty, figured I would get
a backup and as the CM500 are not available in VK but the Koss
:26, Gary Gregory <vk1zzg...@gmail.com> wrote:
> Seasons greetings one and all.
>
> Has anyone used/using the Koss SB45 headsets on their K3?
>
> I have the CM-500 and I am on my second set but again the padding is
> starting to deteriorate so before they look too ra
Simply stated facts. Thanks Jim for the well written response.
Regards,
Gary
On 18 December 2015 at 15:25, Robert Nobis wrote:
> Jim,
>
> Well said. A great overview of a great company and great radio.
>
> 73,
>
>
> Bob Nobis - N7RJN
> n7...@nobis.net
>
>
> > On Dec 17, 2015,
Petr,
Sticky notch is not available and yes it is something I would like to see
and to my knowledge it has always been the same.
No I did not realise Spot did not work when manual notch is used.
73
Gary
On 11 November 2015 at 03:16, ok1rp wrote:
> Hi,
>
> it looks like I
I agree with Jerry, I have found several instances when i need to adjust RF
Gain, slope, athr etc, example, early mornings here I can pull a couple
VK2's, some 2500 kilometers away on 40M. When there are storms around, I
can take away most if not all of the static crashes and they are a clear
copy
Does that mean CW = Communication Wizard?
Gary
On 11 November 2015 at 05:21, Edward R Cole wrote:
> Silly Syllabic Babble
>
> At 10:00 AM 11/10/2015, you wrote:
>>
>>> What is SSB an acronym for???
>>>
>>> Jim
>>> W6AIM
>>>
>>
> 73, Ed - KL7UW
> http://www.kl7uw.com
>
of our list
> subscribers.
>
> 73
>
> Eric
> Moderator
> *elecraft.com <http://elecraft.com>*
>
> On 11/10/2015 11:29 AM, Gary Gregory wrote:
>
> Does that mean CW = Communication Wizard?
>
>
> On 11 November 2015 at 05:21, Edward R Cole <kl...@acsalaska
Or in my case an every day occurrance, Murphy came to visit me one day and
the guy never left :-)
Gary
On 8 November 2015 at 03:20, jim wrote:
> It has to do with the Moon being in the Seventh House and Venus lying with
> Mars..
>
> Jim
> W6AIM
>
>
I sold a pair of PROIII's when my K3 arrived and two things to note, first
I saved a huge amount of room, secondly I found one radio that outperforms
two being replaced. Economically wise decision?nah, just a damn good one
Gary
On 10 September 2015 at 08:12, wrote:
>
My voice, i am told, makes any mic sound bad. So states the bride.:-(
The K3 EQ corrects this birth defect. So say others..:-)
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 10/07/2015 8:52 AM, Fred Jensen k6...@foothill.net wrote:
Yeah, this *has* to be a mis-communications somewhere. I use
Hi think Jim and Joe nailed it with regard to Mic (sound) and
associated cost.
Heil do nothing for me. The price turns me off and as others have stated
the K3 EQ is there to allow us all to use a sensibly priced Mic with good
quality resultant audio which is what we all want. (Thats an
Scott,
On the contrary, I have had two of these units since they were first
introduced to the market and I have used other operators units as well, all
without any issues at all and there have been numerous comments on the
reflector that have reflected this same experience.
I have only used my
I wish you guys would stop crowing about it. My k3 is in hospital
undergoing open heart surgery as we speak so i cannot play radio.
Wayne really should go back to work.
:-)
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 05/06/2015 10:56 AM, brian als...@nc.rr.com wrote:
Phil,
You mean the new S line
I would worry Ken would not get supper too often...:-)
Gary
On 1 June 2015 at 13:56, Fred Jensen k6...@foothill.net wrote:
You do this with software?? I had visions of a Betsy Ross sitting in her
parlor doing my K2 case by hand. :-)
73,
Fred K6DGW
- Northern California Contest Club
-
Please.I hate Wind-blows
:-)
On 11/04/2015 6:14 AM, Al Lorona alor...@sbcglobal.net wrote:
You can still experience the anticipation of tube warm-up time by using a
radio that has to boot up when you turn it on.
Al W6LX
...the radio returns to life, from
the dead.
. ;-)
73, Olli
Contest, DX radio projects: http://www.dh8bqa.de
Am 31.03.2015 um 04:18 schrieb Gary Gregory:
Well i dont see where a huge budget is needed for a mobile version of the
k3.
Remote the box, single rcvr, minimum hardware and a 100w pa.
Remote head should not be too hard
Right on Bill, a mimic of the Icom tune output for their AH4 would be
terrific as there are other applications for this.
We live in hope as the saying goes.
73
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 01/04/2015 10:19 AM, Bill Frantz fra...@pwpconsult.com wrote:
Going out on a limb: The K4 will
Be nice to hear of a KM3
Mobile transceiver maybe with HF/6/VHF/UHF capsbility.
Anyone serious about a mobile setup would much prefer a dedicated
transceiver over trying to use a kx3 which has some major obstacles when
installing it for mobile use.
The k3 is a bit to large in many instances
Well i dont see where a huge budget is needed for a mobile version of the
k3.
Remote the box, single rcvr, minimum hardware and a 100w pa.
Remote head should not be too hard to come up with?
The competition is pretty darn ordinary.
73
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 31/03/2015
Has anybody asked Elecraft support for a schematic?
Cannot imagine they would say no.
Just sayin...
73
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 29/03/2015 11:03 AM, Johnny Siu vr2...@yahoo.com.hk wrote:
Hello Scott,
I suggest we should also put in a suggestion Contact
599 001...contest
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 29/03/2015 9:32 AM, Ian Kahn km4ik@gmail.com wrote:
Your email is 59 into South Carolina. :-)
On Mar 28, 2015 7:23 PM, Ingo Meyer, DK3RED ma...@qrp4fun.de wrote:
Ping. Is anybody out there?
--
73/72 de Ingo, DK3RED - Don't
Hi,
Somebody recently commented on these and also right angle versions which
are the variety i am chasing. Amphenol appear to be unavailable here in VK.
Could somebody point me to a supplier please?
Apologies in advance for the OT bandwidth.
73
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
Fred,
As are lead acid batteries.
I have been using AGM batteries for years now with the K3 plus blade fuses
also.
Portable ops 24/7 here
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 17/03/2015 9:06 AM, Fred Jensen k6...@foothill.net wrote:
I've been using the automotive blade-type
My lips are sealed.:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 9:19 AM, W0MU Mike Fatchett w...@w0mu.com wrote:
and Visalia where Elecraft has been known to release new stuff!
Mike W0MU
On 3/14/2015 4:55 PM, Gary Gregory wrote:
Mike
You might be physic
A sensor is close to completion for the P3 which will do what you want i
believe.
Perhaps you could ask Wayne for confirmation.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 6:51 AM, Vic Rosenthal 4X6GP/K2VCO k2vco@gmail.com
wrote:
I'm sure it would be easy to add a pickup to
Mike
You might be physic...:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 8:54 AM, W0MU Mike Fatchett w...@w0mu.com wrote:
Dayton is coming, Dayton is coming!
Mike W0MU
On 3/14/2015 4:51 PM, Gary Gregory wrote:
Harlen
Yep.
However i have just got more info in the last
on that for how many years now?
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: Gary Gregory vk1zzg...@gmail.com
Date:03/14/2015 5:14 PM (GMT-05:00)
To: Vic K2VCO k2vco@gmail.com
Cc: Elecraft List elecraft@mailman.qth.net
Subject: Re
Bad decoders, Tin pins, audio/speaker issues, intermittant keypad
responses, RIT encoder issue etc have rendered my early K3 pretty useless.
Add a very expensive shipping cost to and from the factory prohibitive,
mine has now been set aside and earmarked for scrap.
Support at Elecraft is
I wonder if any thought has been given to allow for running the KAT3 on
Antenna 1, but have it bypassed on Antenna 2?
For me at least, it would allow me to use the KAT3 on antenna 2 and Antenna
1 could stay bypassed and the KAT500 allow me to use 3 antennas on the k3,
antenna 1.
At the moment i
, 2015, at 6:47 PM, Gary Gregory vk1zzg...@gmail.com wrote:
Hif a new board is $200 as a standalone upgrade item, one might
assume it would increase the cost of a new k3 by at least a smaller margin
to help defray design costs.
If not then one could ponder if these other factors are simply
happymooseph...@gmail.com wrote:
According to the original statements, no. The price is the same. Bravo!
73,
Rick wa6nhc
Tiny iPhone 5 keypad, typos are inevitable
On Feb 24, 2015, at 6:25 PM, Gary Gregory vk1zzg...@gmail.com wrote:
Has a new K3 price gone up $200 for a single receiver
Well i guess those of us who do not contest have to live with what
contesters have on their wish list.
But i do wonder where all those k3's live who are not vocal on the
reflector.
Don't they at least deserve to be considered prior to changes in the way we
operate daily?
I think we do.
I think
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Gary Gregory
Sent: 16 February 2015 03:04
To: Tom
Cc: Elecraft List
Subject: Re: [Elecraft] K3 Beta 5r10 and LINK
I have LINK in use with a 5kc difference between vfo A and vfo B and i
am
constantly
I use the utility to set the clock and have done this for 7 years.
About 4 times i reckon.:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 16/02/2015 9:37 AM, Harry Yingst via Elecraft elecraft@mailman.qth.net
wrote:
Probably had a little program space free way back when.
I never use
Leave LINK as it is please.
I wonder what the majority of k3 owners think?
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 16/02/2015 5:51 AM, Pierfrancesco Caci p...@tippete.net wrote:
brian == brian als...@nc.rr.com writes:
brian Question: does anybody really use XFIL?
I do :)
Ed
Your last paragraph, to me, is spot on.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 16/02/2015 8:35 AM, Edward R Cole kl...@acsalaska.net wrote:
YES - I use XFIL repeatedly to shutdown the IF or restore it to service
when doing eme. I have DATA-A configured to use FL3 which has no
I have LINK in use with a 5kc difference between vfo A and vfo B and i am
constantly tuning around looking for dxpeditions who usually run split.
It means for me a quick tap and i am split up 5 in ssb. I then fine tune
when they are calling up 5-10 etc.
Taking it away is simply not fair.
I do not
Much overlooked perhaps...Turner Plus 3i found one in a sale for $25
and reports are all good.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 10/02/2015 5:44 AM, Bob Gibson via Elecraft elecraft@mailman.qth.net
wrote:
I sure would not pay anything over $100.00 for any Mic..Lots of good
Look here:
Sherrilltree.com
One shot job done. I get as high as i need/want first time every time with
no injury:-)
I believe this originated in the USA
73
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 10/02/2015 9:42 AM, G4GNX g4...@theatreorgans.co.uk wrote:
I think I can beat that.
You didn't mention what response you got from Elecraft Support?
The guys in support are darn good at their job from my experience.
Gary
On 16 January 2015 at 09:05, dave ho13d...@gmail.com wrote:
Recently purchased a K3 kit. Have noted a couple of bugs. Wonder if anyone
else has seen these:
Jim is 100% accurate.
I know when Behringer gear is being used because to my ears and many others
i have spoken to the audio is sharp and/or muffled with excessive bass.
Listened to oos trying to get it adjusted while on air and it always ends
up sounding lousy to my ears.
I will not bother to
As a retired professional it is all about body language and appearance
sadly a sign of the world we live in.
I take my k3 everywhere i travel. Never had an issue BUT then it is NEVER
about radio, it is ALWAYS about people when you travel.
Enjoy the trip and be calm and talk politely to all.
Gary
..orcruise into Innisfail...yeah i said cruise.it is always
raining and if by chace it is notheck just sit fer a minute or three
and it will bucket down to make up for its bad manners by not greeting you
with a drenchingGrin
G'day Jefflol
Gary
Vk1ZZ
K3, KX3, KPA500-FT,
I feel miffed Walter:-)
Yes we do speak English ( proper without an accent)grin.
VK ticks all the boxes AND we like americans...well kinda...:-)
Oh and we are down on rednecks too
All the above comments were tongue in cheek ok?
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On
Instead of clutter on the reflector.request whatever you need from
elecraft supportseems logical to me
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 31/12/2014 9:33 AM, Wes (N7WS) w...@triconet.org wrote:
Not even close.
On 12/30/2014 12:19 PM, Jim Miller wrote:
I suspect the OP
Same here.and i have only used the supplied reference material, use SSB
90% of the time, non resonant antennas as well as a tribander.
I teach the kat500 when i first set up the run in manual mode.
The one time i had sudden tune issued the culprit was one leg of the
ladder line broke at the
AGM batteries can be air freighted...nuff said on safety.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 23/12/2014 7:29 AM, tom armour wa...@hotmail.com wrote:
I use one of these power supplies with a battery backup module installed
(Model: SEC-1223BBM). I have a deep cycle battery attached
Gee whizz
Just what the world needs...another dirty 13.8v...oops 12vdc mobile amp.
Why do folks need to run so much power mobile?...oh yeah, i forgotsilly
me.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 14/12/2014 1:02 AM, Joe Subich, W4TV li...@subich.com wrote:
On 2014-12-13 9:31
Good griefguessing is becoming a favorite topic on the reflector these
days and somehow morphs into reality.
Would not hold my breath on another amp...some of us are still waiting for
features promised to be implemented in other elecraft products..but what
would i know?
Gary
Vk1ZZ
K3, KX3,
There is ample amounts of kool-aid flooding around here still i see...:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 14/12/2014 1:39 AM, Kevin Stover kevin.sto...@mediacombb.net wrote:
Nicely put Guy.
My WK3USB has totally replaced my Logikey K5 for everything...not just
contests.
I
Yeaythanks Phil for confirming a genuine sale.
Now maybe some well intentioned ham will purchase the station and bring
some relief to a fellow ham facing perhaps a very difficult future.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 13/12/2014 7:42 AM, Phil Hystad phys...@mac.com wrote:
One can only hope...:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 13/12/2014 7:45 AM, John, 9H5G kk4...@gmail.com wrote:
Has this not reached the end of its usefulness, if indeed, it ever was?
It's certainly wasting my (expensive) bandwidth here in C6.
73 de John, 9H5G
On Dec 12,
One could read the literature prior to purchase i spose?
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 10/12/2014 1:24 PM, Bruce Beford bef...@myfairpoint.net wrote:
OK, Study was not the right term. It's a matter of knowing the basic
functions and capabilities of a piece of equipment. Best
Ok. Dumb question.
Instsalled utilities and when i open each one it reinstalls it and adds
another icon to the desktop.
Any 8.1 folks know what i did wrong?
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
__
Elecraft mailing list
Home:
Have no clue what I did, but, fixed now.
Stupid Windoze...or operator...:-)
Gary
On 5 December 2014 at 20:32, Gary Gregory vk1zzg...@gmail.com wrote:
Ok. Dumb question.
Instsalled utilities and when i open each one it reinstalls it and adds
another icon to the desktop.
Any 8.1 folks know
Don
You should add that the K3 has been around for quite awhile now so it has
proven not just its performance but adoption by many knowledgeable hams
around the world and has also proven very reliable operating in less than
ideal conditionsask me how i know this:-)
No better
I gave up on it :-(
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 05/12/2014 3:36 AM, hsherriff hsherr...@reagan.com wrote:
I second that emotion (sic).
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom:
zumbr...@comcast.net
Dave
In VK they also offer a photo album you place your photos in on-line for
$20.00 and they are offering additional pages for free and postage is flat
rate of $7.95
Not a bad deal either from looking at it.
Yep, the cards are nice too.
73
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On
Good grief..
No opions allowed unless cleared by a superior i guess.
Oh well, like i dsidwhat would i know?
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 26/10/2014 12:07 PM, Joe Subich, W4TV w...@subich.com wrote:
On 2014-10-25 9:06 PM, Gary Gregory wrote:
Manufacturers changing
Using an old Prolific here still. No known issues to date.
Interedtingly, using teo FTDI cabled i get interference so placed them in
the junk cable box. One came from Elecraft and the other from ebay.
I can easily accept a counterfeit from ebay but the Elecraft supplied cable
was annoying to say
See Microsoft release notice. 9 would have caused the new version to look
for Win 95/98 first then not look further.
:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 02/10/2014 8:38 AM, Doug Person via Elecraft elecraft@mailman.qth.net
wrote:
Surprise! Microsoft has released a preview of
not get out of
control :-)
73,
Eric
List Moderation, Inc.
elecraft.com
On 10/1/2014 4:54 PM, Gary Gregory wrote:
See Microsoft release notice. 9 would have caused the new version to look
for Win 95/98 first then not look further.
:-)
Gary
Vk1ZZ
Phonema should have the right to explain and respond to comments raised on
this reflector in fairness to all i should think.
I dont mind and i am considering their product seriously.
My hesitation is about audio quality to help my hearing as the big 3
produce dreadful speakers for MY hearing but
Powered speakers in the Motorhome is just not going to happen.
I want a non-powered speaker that will work nicely with my k3.
YMMV of course
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 05/09/2014 10:37 AM, Fred Smith m...@totalhighspeed.com wrote:
Sales must be a little slow, price
expensive on the market -- well, I didn't; better said, price was not a
primary decision factor :-)
Phil W7OX
On 9/4/14, 4:50 PM, Gary Gregory wrote:
Phonema should have the right to explain and respond to comments raised on
this reflector in fairness to all i should think.
I dont mind
Don
Prior to the announcement of the svga option, the rf sensor was already
known about.
Then it was noted that the rf sensor was one of two more features to come.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 17/08/2014 2:42 PM, Vic, K2VCO k2vco@gmail.com wrote:
Interesting. And if you
I dont think picky is accurate.
The RF sensor was prior to the svga board and as such it is reasonable to
expect that it will be that way.
Not all P3's are sold with the svga and i imagine sales of the rf sensor
could be higher if that option was not required.
The cost of the sensor will be a
Whatever happened to the RF Sensor?
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 16/08/2014 8:55 AM, XE3/K5ENS via Elecraft elecraft@mailman.qth.net
wrote:
How about being one of the first to implement FreeDV?
Keith
--
View this message in context:
Wayne,
Whew, hope it's not too far away.
Thanks for the news.
Gary
On 16 August 2014 10:02, Wayne Burdick n...@elecraft.com wrote:
In the works as we speak.
Wayne
Gary Gregory vk1zzg...@gmail.com wrote:
Whatever happened to the RF Sensor?
Gary
Vk1ZZ
--
*Gary - VK1ZZ
Agreed, now let's hope somebody IS listening and get this long term issue
resolved.
The Manual Notch eliminates a CW carrier nicely but it too requires button
presses and adjustment that could be simplified surely?
Gary
On 1 August 2014 08:57, Johnny Siu vr2...@yahoo.com.hk wrote:
Hello
Bill
I have found if i am trying to remove Cw i can use manual notch set to the
signal and it seems the distortion fades away.
I gave up using both auto-notch and NR on the k3
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 29/07/2014 11:06 AM, Bill W2BLC w2...@nycap.rr.com wrote:
Hello Sam in
TSA = Tourists Stay Away
Well maybe its just me when i get to the front of the line.
Tried a big smile but maybe she was having a bad hair day:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 07/07/2014 12:28 PM, Fred Jensen k6...@foothill.net wrote:
On 7/6/2014 6:35 PM, David Christ
Good grief folks.
No more 2 cents worth please...even I get it!
End of thread...I hope..
Gary
On 24 June 2014 08:17, mcduf...@ag0n.net wrote:
If this comes to fruition there will be a mass exodus of
regular hams and this will affect not only Elecraft but all ham radio
manufacturers
Steve,
The only negative is the lack of Tx monitoring. Was promised, and the label
on the back of the P3 is beckoning but as nothing is ever mentioned about
this option one can only assume it is not going to happen.
Gary
On 21 June 2014 09:01, Fred Jensen k6...@foothill.net wrote:
You will
Did anyone answer his query regarding the flashing LED?
If not: it is awaiting a carrier to commence tuning.
Oh dear, here i go testing my memory again folksi admit it can be a bit
iffy at times...
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 21/05/2014 7:24 AM, Phil Wheeler
The original post mentioned play back of recorded audio.
Now thats about as difficult to get right as i can think of.
I am not going to preach but, the effort is not worth it as the audio
cannot be duplicated perfectly. Pretty much a waste of time when you
consider setting up the receive and
Jim IS correct though and it would be preferable to use the correct term
rather than those that are bandied around in conversations we hear on air
often.
Gary
On 26 April 2014 06:53, Mike Morrow k...@earthlink.net wrote:
These paragraphs demand a serious and immediate rewrite.
There's no
Hi Phil,
Your preaching to the choir mate...:-)
I think the P3 remote sensor has probably been shelved as I have asked
several times directly and never even got a reply so my assumption is this
device has been placed in the too hard basket and perhaps Elecraft see it
as a limited return on
1 - 100 of 781 matches
Mail list logo