Hello all. I just became the proud owner of a KPOD to add to my Elecraft
stable. Lots of times, especially when S&P in contests, I tune my K3S with
my P3. Is it possible to configure the KPOD to emulate the "select" control
on the P3, and then program one of the Function buttons to emulate "tapp
Hello. Is it possible to manually adjust anything other than the position
of the notch filter on the K3S. I recently was working FT8, when a ham
relatively close to me was desensing my receiver when working FT8 on the
same band. I was able to notch him out by manually setting the filter, but
it
gonomic conservation".
That sounds better than "being lazy":-).
Thanks again!
73,
Ken, KJ9B
-Original Message-
From: Mike Flowers [mailto:mike.flow...@gmail.com]
Sent: Wednesday, August 07, 2019 4:16 PM
To: 'Ken Bandy, KJ9B'; elecraft@mailman.qth.net
Subjec
I am wondering if there is a command sequence string that will play a
recorded message on my K3S. I have looked through the programmer's guide
for the radio, but nothing popped out at me before my eyes glazed over...
Thanks in advance.
Ken, KJ9B
___
Thanks for all of the replies. I will give them a call tomorrow. The last
I checked, it was around 4 or 5 hours from where we're staying (Thousand
Oaks). Hopefully we can make it work. Otherwise, we'll catch it another
time.
73,
Ken, KJ9B
-Original Message-
From: elecraft-boun...@mail
Are there any plans yet for a KPA 1500 in Kit form?
73,
Ken, KJ9B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Hi Steve, if you're still using DXLabs, you can use MultiPSK, which utilizes
the "Commander" module of DXLab Suite. That's what I do, and it works
perfectly. No additional hardware needed with the K3S, just the USB interface
from the radio to the PC. Only thing to watch out for is to make sur
Thanks very much, Bill! I looked at that configuration menu, but didn't
scroll through it to "USB". GEEZ!
73,
Ken, KJ9B
-Original Message-
From: Nr4c [mailto:n...@widomaker.com]
Sent: Tuesday, September 08, 2015 10:33 PM
To: Ken Bandy, KJ9B
Subject: Re: [Elecraft] Co
New guy here. I'm the same guy that had the problem with the KSYN3A board
not checking out in my new build. After an email from Gary, AB7MY, at
Elecraft, I removed and reinstalled the board, and it magically worked OK!
Anyway, I got to the part in the checkout of the build where I am supposed
status of the synthesizer.
I have to work tomorrow, but I'll send an email to Elecraft and see what they
have to say.
Thanks again!
73,
Ken, KJ9B
From: RIchard Williams [mailto:richarddw1...@yahoo.com]
Sent: Monday, September 07, 2015 5:33 PM
To: Ken Bandy, KJ9B
Subjec
Hello all. Last week I received my K3S/100 (S/N 10270) kit, including KDVR3
recorder, KRX3A second receiver, and .5ppm TCXO. After getting the kit
assembled per the assembly manual, I got to the checkout phase prior to
installing the 100W amp, and second receiver. The unit powered on as it
shoul
11 matches
Mail list logo