hing about wstx
causes the VFO's to match on TX losing the split ?
vk4tux
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
Playing with my v5.24 HRD, it all works well with the KX3 under the K3
profile, apart from activating the ATU which doesnt work with ATU or Tune
buttons.
Has anyone modified the program cat control to do this if they could share
please, thankyou.
Adrian, vk4tux
--
Sent from: http://elecraft
like a PX3 , however not at current pricing, and looking at a used
unit if some one is selling.
Adrian ... vk4tux
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Link points to;
http://www.elecraft.com/K3/software/K3_Utility_Setup_1_12_9_22.exe
from
http://www.elecraft.com/K3/k3_software.htm
@ •K3 Utility (Windows Version 1.12.9.22) October 2, 2012
--
View this message in context:
K3 Utility:
After completing a new software download to your K3, please power cycle the
K3 OFF and then back ON before using it.
•K3 Utility (Windows Version 1.12.9.22) October 2, 2012
◦Note: This K3 Utility version can be used to load K3 MCU versions 1.32 and
above to your K3.
◦Download
Don, When you say The ATU will tune the antenna to an acceptable SWR, you
are contradicting yourself, because as you rightly said the tuner does not
change the antenna feedpoint swr.
So we tune the transceiver to the feedline length feeding the antenna. that
feedline length is important
Do Parameter Initialization as described on page 28 of the current P3
manual.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Fatal-Error-tp7562499p7562501.html
Sent from the Elecraft mailing list archive at Nabble.com.
emailed me with a similar problem and I told him the same thing
and he was astounded at
the fact the K3 does not need an interface, Everything you need is built in,
and now he is a very happy camper.
Take the mickey-ham-ears out and try direct OM.
Adrian ... vk4tux
Tom, make sure your PC
... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-JT-65-HF-transmit-tp7562398p7562458.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net
Unusual to see that as an issue withought using an amplifier, however the
high antenna feedpoint impedance on such setups produce a high voltage at
that point, despite the atu proving a 50 ohm impedance match to the
transceiver.
Baluns rated at 3-5 KW are so only at 1:1 swr. When swr raises to
I have the kit 12v output mod kit still sitting in the shack draw unfitted,
and have been running the P3SVGA module first in vk since they started
shipping.
I have had no issues and run the K3 at 15v.
--
View this message in context:
Ok, I was thinking the P3/SVGA drew less current at 15v than 12v, due to the
5/3.3/2.5/2.2 v pwr supply setup requiring less current at 15v input than it
does at 14v input or less.
I checked the K3 output with a 20 ohm/50w variable rheostat and it trips at
0.6amp or 600mA on my fluke 87.
CONFIG:VFO IND = No
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
http://www.logitech.com/en-gb/support/keyboards/keyboard-k360?section=downloads
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-SVGA-AZERTY-keyboard-tp7562149p7562156.html
Sent from the Elecraft mailing list archive at Nabble.com.
Mike , What I am wondering now is how line in adj helped you, as when when I
suggested that you look at line in level earlier, you said you are using FP
front mike for input?
Adrian ... vk4tux
Adrian, Thanks for the input. I got the Beta firmware, downloaded
set up and running so am good
depends on usage)
So maybe its not that big a risk.
I note the product info says;
Requires programming with Logitech's SetPoint software, free for download
Does it have to be programmed before use with the P3SVGA?
Adrian ... vk4tux
--
View this message in context:
http://elecraft
.
Having macro qso's on psk31 bored me to tears years ago, often the other
station will not type , but just send macro's incl 73.
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Use-of-wireless-keyboard-with-P3-SVGA-tp7561800p7561828.html
Sent from
The K3 will handle it direct no issue, with no interface required.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-interfacing-with-AL-811-amp-and-buffering-tp7561715p7561716.html
Sent from the Elecraft mailing list archive at Nabble.com.
been stable in the past, I would perform a
system restore to that era.
http://pcsupport.about.com/od/fixtheproblem/ht/system-restore-windows-7.htm
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Mac-K3-and-P3-Utilities-tp7561709p7561718.html
Sent from
I would be checking the dc resistance of the the 50 ohm output bnc back
through, as it sounds more
like a short than an open circuit.
Quite often an open will only attenuate a rx signal rather than silence it
altogether as a short will do.
Adrian ... vk4tux
--
View this message in context
I would probably go with 2 x 1.5KE51CA-ND inverse paralleled across the diode
to avoid impedance issues.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-Problems-tp7561545p7561555.html
Sent from the Elecraft mailing list archive at Nabble.com.
find the download , unzip then manual browsing for other than
current versions, etc a bit brainswelling.
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3Util-version-history-tp5946045p7561442.html
Sent from the Elecraft mailing list archive
to be selected) of reverting back or trying beta software that is
available for download otherwise at Elecrafts discretion decision to have
it available.
~If you keep non-technical types wrapped up in cotton wool, then how will
they ever become technical or real hams?
~Adrian ... vk4tux
Link to part here;
http://www.digikey.com/product-detail/en/LT1039ACN%23PBF/LT1039ACN%23PBF-ND/889907
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-RS232-tp7561278p7561316.html
Sent from the Elecraft mailing list archive at Nabble.com.
DLY.value,
and/or Using a P3SVGA data tx method other than vox for psk31, where a enter
or cntrl key sends the stored text entered..
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-PSK31-Problem-tp7560706p7560713.html
Sent from the Elecraft mailing list
Ok On the power hunt stuff. In the 14v days I always had issue with power
level as described,
despite many many many tx power calibrations.
Since running the K3 at 15v there has been no misbehaviour.
My theory is the current sensor playing up at the lower voltage.
Adrian ... vk4tux
--
View
This is a great feature.
I placed my callsign and phone number on the bootup splash msg etc.
This is very useful if your beloved K3 gets stolen (prove ownership), lost
or otherwise missing.
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/splash
Thank you I installed it and it's working.
T-Mobile. America’s First Nationwide 4G Network
- Reply message -
From: Adrian Fewster a.fews...@pf.uq.edu.au
To: np3...@yahoo.com np3...@yahoo.com
Cc: elecraft@mailman.qth.net elecraft@mailman.qth.net
Subject: K3EZ
Date: Mon, Aug 6, 2012 8:00 pm
to get emails, so i messed up
there.
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-EZ-tp5805324p7560508.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Now and then I get a little glitch situation where keyboard cntrl does
not seem to function and the c is sent instead when looking to clear
tx/rx fields etc. Anyone else getting that? On 14084.36 now. RTTY
Adrian... vk4tux
--
View this message in context:
http://elecraft.365791.n2
sure it could be done similar to the ARRL format example etc.
I guess it just depends if you wish to keep it to staff only or extend to
customers(at a fee).
For thought and input?
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Email-Change
My guess from your 995 ohm resistance check, is a dead Q2 FDS6375. It will be
interesting to see.
I would post the K3 to Elecraft and have it when you get home. Good luck on
the trip.
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Dead-K3
Gary, I had replied to your post, perhaps it went to you direct and I am on
your naughty list ? ;)
Anyhow if the K3 baud rate (rs-232 config) is not 38400 then that will do
it.
Some versions of firmware in the past would sync the K3-P3 to 38400, but I
am not sure now.
Anyhow check the baud rate.
Hello friends,
Thanks for looking in at my qrz info.
I get on 10, 17, 20, 40, 75 160 meters - SSB CW
Equipment: Elecraft K-Line K3, P3 New KPA500 Amp
Looking at thje above, you cant leave us Joe.
You are just too much a part of the Elecraft family friend.
--
View this message in
Hello friends,
Thanks for looking in at my qrz info.
I get on 10, 17, 20, 40, 75 160 meters - SSB CW
Equipment: Elecraft K-Line K3, P3 New KPA500 Amp
Looking at the above, you cant leave us Joe.
You are just too much a part of the Elecraft family friend.
--
View this message in
asked. I also want to try it with
W4P3.
Easy enough to clear a checkbox and reconnect direct for firmware/config
usage.
Other than that is a terminal only version of K3Util a possibility Dick?
Other than that I guess I can try Kcomm.
Adrian ... vk4tux
--
View this message in context:
http
or two back.
As you say the terminal function is what I want on collaboration with W4P3
etc, and I find it very good.
Adrian ... vk4tux
nb ribscmont
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3Util-with-LPBridge-tp7557164p7557183.html
Sent from the Elecraft
:49 /dev/ttyUSB0
[root@fedora16desk ~]#
Above will show the group owner i.e dialout.
Adrian ... vk4tux
I received that post which was sent to elecraft@mailman.qth.net, however I
dont see here it it in the nabble list, as I was trying to work out why you
did not see it.
oh well.
--
View
Wayne, why would he not use the K3 utility rather than KX3 utility?
Perhaps you have been working to hard and need some rest :)
cheers
Adrian
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-failure-tp7557134p7557138.html
Sent from the Elecraft mailing list archive at
I take it your running a typical 13.8v supply.
Running a stiff 15v supply cleans up the K3 TX IM3 dramatically.
The filter also keeps the key signals clean into the K3.
You say the guy was talking bars on the psk signal.
I guess he may not know what he is talking about.
Next time you get a bad
off topic. I would start a new thread if you want to talk afsk
etc.
Our concern here is why would a K3 put out a dirty PSK-D signal, Thats what
I commented on.
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-psk-D-splater-tp7556767p7556814.html
Sent
What is the K3 screen voltage indicator telling you?
NB:(Apologies to group for some bad spelling in earlier posts. Using nabble
at the moment and had edited the posts before, but alas the unedited
versions got sent)
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2
Yes you are right Rick, let fix the OP's subject error listing.
RTTY FSK-D is the mode tried right ? Mark and shift, shift keying
ascii ky keying from the k3 via K3 utility or Kcomm.
I dont know how I let myself repeat the psk-d rubbish, but I am a very
naughty boy.
Adrian ... vk4tux
--
View
The K3_EZ swr plotter points will be of the KAT-500 input over the tested
frequency range.
I am not sure why that would be useful, unless a high swr is observed on the
k3.
What swr tune points do you mean? It is an autotuner in anycase yes?
--
View this message in context:
Yes the lower price is for the 6500 transceiver (not receiver)
;
FLEX-6500 Limited Edition Pre-Order Deposit Only - Total Introductory Price:
$3999 (deposit $1200)
The FLEX-6500™ Signature Series transceiver is based on a new hardware
architecture and SmartSDR software platform. This hardware
Joe, Doesnt the KFL3B-FM filer allow AM transmit, wnen you set it up as 6k
bandwidth in K3 Utility Xtal config?
I was under the impression from past posts that that was the case and
KFL3B-FM could be set back to 13k for FM use again?
Adrian ... vk4tux
--
View this message in context:
http
\Now in
the terminal, run the following command to update your grub configuration
with the new default settings:
Code:
sudo update-grub
Adrian ... vk4tux
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Linux-and-K3-Utility-tp7395772p7397425.html
Sent from the Elecraft mailing
Bob,
Saw your callsign, and would like to mention that if you ever
develop a hand mic for the K3 etc, please let us know.
The ic-7 mic kit I got from you years back works A1. Sorry for being
OT. Hope you enjoy the KX3.
Adrian ... vk4tux
--
View this message in context:
http
48 matches
Mail list logo