Re: [Elecraft] K3S Power Creep (again)

2018-03-14 Thread Edward R Cole
Don has pegged the usual cause of "power creep". I had a bit of that when I first set up my K3 for using WSJT programs back in 2010 when my radio was new. But the radio does not like you adjusting the power knob if it is transmitting under software. Wait till its in receive mode then you c

Re: [Elecraft] K3S Power Creep (again)

2018-03-14 Thread Buck
I have had the same experience running FT8. Buck, k4ia Honor Roll 8BDXCC EasyWayHamBooks.com On 3/13/2018 5:46 PM, ab2tc wrote: Hi all, I have the same problem. Anytime I change something, like band, power or a number of other things, power starts up ridiculously low and creeps *very* slowly u

Re: [Elecraft] K3S Power Creep (again)

2018-03-13 Thread marvwheeler
Reflector Subject: Re: [Elecraft] K3S Power Creep (again) Power Creep I bet each one of you that has this problem has one defective output power transistor. The remaining transistor can reach full power but it takes a while. Talk to Elecraft service and ask them if they think that is your

Re: [Elecraft] K3S Power Creep (again)

2018-03-13 Thread Kenneth Christiansen
Power Creep I bet each one of you that has this problem has one defective output power transistor. The remaining transistor can reach full power but it takes a while. Talk to Elecraft service and ask them if they think that is your problem and if it is then make arrangements to get it fixed. G

Re: [Elecraft] K3S Power Creep (again)

2018-03-13 Thread Don Wilhelm
One of the causes for that "power creep" when using soundcard data modes (DATA A or AFSK A) is insufficient audio to the K3. The audio level must be adjusted to produce 4 bars solid with the 5th bar flashing on the ALC meter. For voice modes, a similar situation may exist, and with compressio

Re: [Elecraft] K3S Power Creep (again)

2018-03-13 Thread ab2tc
Hi all, I have the same problem. Anytime I change something, like band, power or a number of other things, power starts up ridiculously low and creeps *very* slowly up to the 100W mark. Even without changing anything the actual peak power on a transmission can be anywhere between 80 and 120W as in

Re: [Elecraft] K3S Power Creep (again)

2018-03-13 Thread Jim N7US
I had the same problem, plus my output on 160 and 80 was low. I just had the radio back for warranty service, and they turned it around in just a few days. I was very pleased. 73, Jim N7US -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Wes Stewart Sent: Tuesda