Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware?
On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Hi, I'm trying to support this device under my Linux distro (LFS based, so custom made from sources) and I'm bit stucked. I have downloaded firmware_v2.tgz and included support for this device in the kernel, but it fails at the time of loading the xc3028-v27.fw file. just try to compile the driver from mcentral.de, it has the firmware built in already. $ hg clone http://mcentral.de/hg/~mrec/em28xx-new $ cd em28xx-new $ make $ make install $ - reboot - if you installed the code from linuxtv.org you probably upgraded the whole media framework you would have to run make modules_install in the kernel sourcetree again in order to revert the media core, the em28xx-new repository only contains the driver and not the whole media framework. regards, Markus Here is the output of dmesg: em28xx new video device (0ccd:005e): interface 0, class 255 em28xx Doesn't have usb audio class em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: chip ID is em2882/em2883 Clocksource tsc unstable (delta = -62880812 ns) tuner' 1-0061: chip found @ 0xc2 (em28xx #0) em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 00 em28xx #0: i2c eeprom f0: 36 00 32 00 36 00 31 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a, hash = 0x5a13bfbe Vendor/Product ID= 0ccd:005e AC97 audio (5 sample rates) 500mA max power Table at 0x27, strings=0x409e, 0x1cde, 0x346a em28xx #0: em28xx #0: The support for this board weren't valid yet. em28xx #0: Please send a report of having this working em28xx #0: not to V4L mailing list (and/or to other addresses) xc2028 1-0061: creating new instance xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f input: SynPS/2 Synaptics TouchPad as /class/input/input5 Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000 input: SynPS/2 Synaptics TouchPad as /class/input/input6 input: AT Translated Set 2 keyboard as /class/input/input7 xc2028 1-0061: Error: firmware xc3028-v27.fw not found. tvp5150 1-005c: tvp5150am1 detected. em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em28xx #0: Found Terratec Hybrid XS (em2882) my xc3028-v27.fw file is located in /lib/firmware among the other files in the firmware_v2.tgz file, and I extracted it using the extract-xc3028.pl perl script using the Hauppauge windows driver as stated in http://lists-archives.org/video4linux/20831-extract-tool-for-xc3028-firmware.html I'm curious because my windows driver (under windows xp 32bit) is named emBDA.sys, but I have tried the convert.c utility and it doesn't work, it produces 0 output. Is it something more I need in order to correct this last step prior to have my tv tuner working? Thanks in advance, Julio ___ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx ___ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx
Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware?
Thanks Valerio and Markus, That's exactly what I did per Valerio's suggestion and it worked, now I'm facing the problem of not being able to tune any digital station even if I have extracted the es-Malaga (the city where I live in Spain) and run the scan program over it, but well... it's just another little step, other than that, the analog inputs are working really great (tested so far with zapping). Thanks a lot :D Julio -- From: Markus Rechberger mrechber...@gmail.com Sent: Friday, January 09, 2009 3:13 PM To: Julio Meca Hansen lydiankni...@gmail.com Cc: em28xx@mcentral.de Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware? On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Hi, I'm trying to support this device under my Linux distro (LFS based, so custom made from sources) and I'm bit stucked. I have downloaded firmware_v2.tgz and included support for this device in the kernel, but it fails at the time of loading the xc3028-v27.fw file. just try to compile the driver from mcentral.de, it has the firmware built in already. $ hg clone http://mcentral.de/hg/~mrec/em28xx-new $ cd em28xx-new $ make $ make install $ - reboot - if you installed the code from linuxtv.org you probably upgraded the whole media framework you would have to run make modules_install in the kernel sourcetree again in order to revert the media core, the em28xx-new repository only contains the driver and not the whole media framework. regards, Markus Here is the output of dmesg: em28xx new video device (0ccd:005e): interface 0, class 255 em28xx Doesn't have usb audio class em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: chip ID is em2882/em2883 Clocksource tsc unstable (delta = -62880812 ns) tuner' 1-0061: chip found @ 0xc2 (em28xx #0) em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 00 em28xx #0: i2c eeprom f0: 36 00 32 00 36 00 31 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a, hash = 0x5a13bfbe Vendor/Product ID= 0ccd:005e AC97 audio (5 sample rates) 500mA max power Table at 0x27, strings=0x409e, 0x1cde, 0x346a em28xx #0: em28xx #0: The support for this board weren't valid yet. em28xx #0: Please send a report of having this working em28xx #0: not to V4L mailing list (and/or to other addresses) xc2028 1-0061: creating new instance xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f input: SynPS/2 Synaptics TouchPad as /class/input/input5 Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000 input: SynPS/2 Synaptics TouchPad as /class/input/input6 input: AT Translated Set 2 keyboard as /class/input/input7 xc2028 1-0061: Error: firmware xc3028-v27.fw not found. tvp5150 1-005c: tvp5150am1 detected. em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em28xx #0: Found Terratec Hybrid XS (em2882) my xc3028-v27.fw file is located in /lib/firmware among the other files in the firmware_v2.tgz file, and I extracted it using the extract-xc3028.pl perl script using the Hauppauge windows driver as stated in http://lists-archives.org/video4linux/20831-extract-tool-for-xc3028-firmware.html I'm curious because my windows driver (under windows xp 32bit) is named emBDA.sys, but I have tried the convert.c utility and it doesn't work, it produces
Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware?
On Fri, Jan 9, 2009 at 6:08 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Thanks Valerio and Markus, That's exactly what I did per Valerio's suggestion and it worked, now I'm facing the problem of not being able to tune any digital station even if I have extracted the es-Malaga (the city where I live in Spain) and run the scan program over it, but well... it's just another little step, other than that, the analog inputs are working really great (tested so far with zapping). what does dmesg show up? Markus Thanks a lot :D Julio -- From: Markus Rechberger mrechber...@gmail.com Sent: Friday, January 09, 2009 3:13 PM To: Julio Meca Hansen lydiankni...@gmail.com Cc: em28xx@mcentral.de Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware? On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Hi, I'm trying to support this device under my Linux distro (LFS based, so custom made from sources) and I'm bit stucked. I have downloaded firmware_v2.tgz and included support for this device in the kernel, but it fails at the time of loading the xc3028-v27.fw file. just try to compile the driver from mcentral.de, it has the firmware built in already. $ hg clone http://mcentral.de/hg/~mrec/em28xx-new $ cd em28xx-new $ make $ make install $ - reboot - if you installed the code from linuxtv.org you probably upgraded the whole media framework you would have to run make modules_install in the kernel sourcetree again in order to revert the media core, the em28xx-new repository only contains the driver and not the whole media framework. regards, Markus Here is the output of dmesg: em28xx new video device (0ccd:005e): interface 0, class 255 em28xx Doesn't have usb audio class em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: chip ID is em2882/em2883 Clocksource tsc unstable (delta = -62880812 ns) tuner' 1-0061: chip found @ 0xc2 (em28xx #0) em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 00 em28xx #0: i2c eeprom f0: 36 00 32 00 36 00 31 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a, hash = 0x5a13bfbe Vendor/Product ID= 0ccd:005e AC97 audio (5 sample rates) 500mA max power Table at 0x27, strings=0x409e, 0x1cde, 0x346a em28xx #0: em28xx #0: The support for this board weren't valid yet. em28xx #0: Please send a report of having this working em28xx #0: not to V4L mailing list (and/or to other addresses) xc2028 1-0061: creating new instance xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f input: SynPS/2 Synaptics TouchPad as /class/input/input5 Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000 input: SynPS/2 Synaptics TouchPad as /class/input/input6 input: AT Translated Set 2 keyboard as /class/input/input7 xc2028 1-0061: Error: firmware xc3028-v27.fw not found. tvp5150 1-005c: tvp5150am1 detected. em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em28xx #0: Found Terratec Hybrid XS (em2882) my xc3028-v27.fw file is located in /lib/firmware among the other files in the firmware_v2.tgz file, and I extracted it using the extract-xc3028.pl perl script using the Hauppauge windows driver as stated in http://lists
Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware?
On Fri, Jan 9, 2009 at 7:20 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: This is my new dmesg output (dmesg | grep em28 dmesg | grep DVB): em28xx v4l2 driver version 0.0.1 loaded em28xx: new video device (0ccd:005e): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video1 input: em2880/em2870 remote control as /class/input/input9 em28xx-input.c: remote control handler attached em28xx #0: Found Empia Hybrid ATSC (em2882) usbcore: registered new interface driver em28xx em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em2880-dvb.c: DVB Init DVB: registering new adapter (em2880 DVB-T) em2880-dvb.c: DVB Init DVB: registering new adapter (em2880 DVB-T) guess this was a copy/paste error? Markus DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Em28xx: Initialized (Em2880 DVB Extension) extension Julio On Fri, 2009-01-09 at 18:16 +0100, Markus Rechberger wrote: On Fri, Jan 9, 2009 at 6:08 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Thanks Valerio and Markus, That's exactly what I did per Valerio's suggestion and it worked, now I'm facing the problem of not being able to tune any digital station even if I have extracted the es-Malaga (the city where I live in Spain) and run the scan program over it, but well... it's just another little step, other than that, the analog inputs are working really great (tested so far with zapping). what does dmesg show up? Markus Thanks a lot :D Julio -- From: Markus Rechberger mrechber...@gmail.com Sent: Friday, January 09, 2009 3:13 PM To: Julio Meca Hansen lydiankni...@gmail.com Cc: em28xx@mcentral.de Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware? On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Hi, I'm trying to support this device under my Linux distro (LFS based, so custom made from sources) and I'm bit stucked. I have downloaded firmware_v2.tgz and included support for this device in the kernel, but it fails at the time of loading the xc3028-v27.fw file. just try to compile the driver from mcentral.de, it has the firmware built in already. $ hg clone http://mcentral.de/hg/~mrec/em28xx-new $ cd em28xx-new $ make $ make install $ - reboot - if you installed the code from linuxtv.org you probably upgraded the whole media framework you would have to run make modules_install in the kernel sourcetree again in order to revert the media core, the em28xx-new repository only contains the driver and not the whole media framework. regards, Markus Here is the output of dmesg: em28xx new video device (0ccd:005e): interface 0, class 255 em28xx Doesn't have usb audio class em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: chip ID is em2882/em2883 Clocksource tsc unstable (delta = -62880812 ns) tuner' 1-0061: chip found @ 0xc2 (em28xx #0) em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware?
Oops, my bad, double grep makes for a double error :S Yes, the entry is not duplicated in the full dmesg. Julio On Fri, 2009-01-09 at 19:33 +0100, Markus Rechberger wrote: On Fri, Jan 9, 2009 at 7:20 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: This is my new dmesg output (dmesg | grep em28 dmesg | grep DVB): em28xx v4l2 driver version 0.0.1 loaded em28xx: new video device (0ccd:005e): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video1 input: em2880/em2870 remote control as /class/input/input9 em28xx-input.c: remote control handler attached em28xx #0: Found Empia Hybrid ATSC (em2882) usbcore: registered new interface driver em28xx em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em2880-dvb.c: DVB Init DVB: registering new adapter (em2880 DVB-T) em2880-dvb.c: DVB Init DVB: registering new adapter (em2880 DVB-T) guess this was a copy/paste error? Markus DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Em28xx: Initialized (Em2880 DVB Extension) extension Julio On Fri, 2009-01-09 at 18:16 +0100, Markus Rechberger wrote: On Fri, Jan 9, 2009 at 6:08 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Thanks Valerio and Markus, That's exactly what I did per Valerio's suggestion and it worked, now I'm facing the problem of not being able to tune any digital station even if I have extracted the es-Malaga (the city where I live in Spain) and run the scan program over it, but well... it's just another little step, other than that, the analog inputs are working really great (tested so far with zapping). what does dmesg show up? Markus Thanks a lot :D Julio -- From: Markus Rechberger mrechber...@gmail.com Sent: Friday, January 09, 2009 3:13 PM To: Julio Meca Hansen lydiankni...@gmail.com Cc: em28xx@mcentral.de Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware? On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Hi, I'm trying to support this device under my Linux distro (LFS based, so custom made from sources) and I'm bit stucked. I have downloaded firmware_v2.tgz and included support for this device in the kernel, but it fails at the time of loading the xc3028-v27.fw file. just try to compile the driver from mcentral.de, it has the firmware built in already. $ hg clone http://mcentral.de/hg/~mrec/em28xx-new $ cd em28xx-new $ make $ make install $ - reboot - if you installed the code from linuxtv.org you probably upgraded the whole media framework you would have to run make modules_install in the kernel sourcetree again in order to revert the media core, the em28xx-new repository only contains the driver and not the whole media framework. regards, Markus Here is the output of dmesg: em28xx new video device (0ccd:005e): interface 0, class 255 em28xx Doesn't have usb audio class em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: chip ID is em2882/em2883 Clocksource tsc unstable (delta = -62880812 ns) tuner' 1-0061: chip found @ 0xc2 (em28xx #0) em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69
Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware?
On Fri, Jan 9, 2009 at 7:36 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Oops, my bad, double grep makes for a double error :S Yes, the entry is not duplicated in the full dmesg. I'll check that device tomorrow again I have it here too. The ATSC description in dmesg is wrong but I noticed it it was set to an engineering sample at one time, expect to have it work tomorrow then. Markus Julio On Fri, 2009-01-09 at 19:33 +0100, Markus Rechberger wrote: On Fri, Jan 9, 2009 at 7:20 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: This is my new dmesg output (dmesg | grep em28 dmesg | grep DVB): em28xx v4l2 driver version 0.0.1 loaded em28xx: new video device (0ccd:005e): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video1 input: em2880/em2870 remote control as /class/input/input9 em28xx-input.c: remote control handler attached em28xx #0: Found Empia Hybrid ATSC (em2882) usbcore: registered new interface driver em28xx em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em2880-dvb.c: DVB Init DVB: registering new adapter (em2880 DVB-T) em2880-dvb.c: DVB Init DVB: registering new adapter (em2880 DVB-T) guess this was a copy/paste error? Markus DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Em28xx: Initialized (Em2880 DVB Extension) extension Julio On Fri, 2009-01-09 at 18:16 +0100, Markus Rechberger wrote: On Fri, Jan 9, 2009 at 6:08 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Thanks Valerio and Markus, That's exactly what I did per Valerio's suggestion and it worked, now I'm facing the problem of not being able to tune any digital station even if I have extracted the es-Malaga (the city where I live in Spain) and run the scan program over it, but well... it's just another little step, other than that, the analog inputs are working really great (tested so far with zapping). what does dmesg show up? Markus Thanks a lot :D Julio -- From: Markus Rechberger mrechber...@gmail.com Sent: Friday, January 09, 2009 3:13 PM To: Julio Meca Hansen lydiankni...@gmail.com Cc: em28xx@mcentral.de Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 firmware? On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen lydiankni...@gmail.com wrote: Hi, I'm trying to support this device under my Linux distro (LFS based, so custom made from sources) and I'm bit stucked. I have downloaded firmware_v2.tgz and included support for this device in the kernel, but it fails at the time of loading the xc3028-v27.fw file. just try to compile the driver from mcentral.de, it has the firmware built in already. $ hg clone http://mcentral.de/hg/~mrec/em28xx-new $ cd em28xx-new $ make $ make install $ - reboot - if you installed the code from linuxtv.org you probably upgraded the whole media framework you would have to run make modules_install in the kernel sourcetree again in order to revert the media core, the em28xx-new repository only contains the driver and not the whole media framework. regards, Markus Here is the output of dmesg: em28xx new video device (0ccd:005e): interface 0, class 255 em28xx Doesn't have usb audio class em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: chip ID is em2882/em2883 Clocksource tsc unstable (delta = -62880812 ns) tuner' 1-0061: chip found @ 0xc2 (em28xx #0) em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c
