Re: [O] conflict load of epresent - org mode 8.0.3
Hi, > I just updated the require statements in epresent.el. > > https://github.com/eschulte/epresent/blob/master/epresent.el > > I'm not sure what epresent-org.el is. For your information, Sacha Chua on her blog has given a short description of EPresent accessible on the following link http://sachachua.com/blog/2013/04/how-to-present-using-org-mode-in-emacs/ Above it is mentioned about a tool called org-present developed by Ric Lister. I certainly made a confusion in my mail with this tool when I mentioned epresent-org.el. Sorry for this. Anyway your changes work well. Thanks
Re: [O] conflict load of epresent - org mode 8.0.3
Hi, If the intention is to use epresent with org file, is it necessary to put the following instructions in epresent.el and epresent-org.el? (require 'ox) (require 'ox-latex) I suppose that when a org file is loaded, this library and corresponding are already loaded, so these intructions may be not needed ? Thanks writes:
[O] conflict load of epresent - org mode 8.0.3
Hi, This post to report a problem about epresent and new version of org mode. I have just tried to update from releas 7.9.2 to 8.0.3 and I encountered several problems that are partially solved by the description of the changes due to the actual export and new name conventions. >From time to time, I use epresent tool that I find useful for tiny presentation. Tool is described here : http://orgmode.org/worg/org-tutorials/non-beamer-presentations.html#sec-2 There are conflicts when this tool is loaded with new version of org mode. In source files there are the following instructions : (require 'org-exp) (require 'org-latex) As far I understand these modules are not available with this specific names. I have commented these two instruction in epresent-org.el and in epresent.el. I load ox.el and ox-latex.el in my .emacs and before loading the epresent tool and it seems to solve the conflicts and to work. Regard
Re: [O] org-protocol in windows and Acrobat Reader
>
> This indicates that .replace('|',':') didn't work out as expected and
> org-protocol received
>
> org-protocol://store-link://file%3A%2F%2F%2FC%7C%2FTemp%2Ffile.pdf
> ^^^
>
> Maybe this could do the trick:
>
> ,
> | app.addMenuItem({cName:"org-store-link", cParent:"File",
> | cExec:"app.launchURL('org-protocol://store-link://'+ unescape
> | (encodeURIComponent(this.URL.replace('|',':';"});
> `
>
Indeed I get the corresponding character.
org-protocol://store-link://file:///C:/Temp/file.pdf
The problem of the bad interpretation of the character "/" still remains when
I go back to emacs. I get the following proposition when I use C-c C-l : file:
(C:).
Thank you for your help.
> I.e. replace | by : in the original URL before encoding it.
>
> Best,
> -- David
> --
> OpenPGP... 0x99ADB83B5A4478E6
> Jabber dmjena jabber.org
> Email. dmaus ictsoc.de
>
[O] org-protocol in windows and Acrobat Reader
Hi,
I try to use a function proposed with org-protocol as explained in this link.
http://orgmode.org/worg/org-contrib/org-protocol.html#sec-2
I would like to launch a pdf file in Acrobat Reader and to use org-store-
link.js to capture the full path of the document in an org file.I try to use
what it was explained on the link I have already and I have a look on the
following link.
http://article.gmane.org/gmane.emacs.orgmode/6810
It doesn't work as I expect.
As I just want to capture the full path of the file (example here is file.pdf
in C:\Temp), I use the following javascript call org-store-link accessible in
menu File of Acrobat Reader :
app.addMenuItem({cName:"org-store-link", cParent:"File",
cExec:"app.launchURL('org-protocol://store-link://'+
encodeURIComponent(this.URL));"});
I get the following string given to org-protocol:
org-protocol://store-link://file%3A%2F%2F%2FC%7C%2FTemp%2Ffile.pdf
There is several issue. The escaped character is not interpreted when feed in
emacs and when I use C-c C-l (org-insert-link) I have the following
proposition :
file: (C|).
Then I try the following script, to get '/' character to feed org-protocol:
app.addMenuItem({cName:"org-store-link", cParent:"File",
cExec:"app.launchURL('org-protocol://store-link://'+ unescape
(encodeURIComponent(this.URL)).replace('|',':'));"});
I get the following the expected string :
org-protocol://store-link://file:///C:/Temp/File.pdf
Again when I use C-c C-l, I have the proposition : file: (C|).
I made the assumption that it is a problem of interpretation of '/'.Then I
replace this character with "++".
app.addMenuItem({cName:"org-store-link", cParent:"File",
cExec:"app.launchURL('org-protocol://store-link://'+ unescape
(encodeURIComponent(this.URL)).replace('|',':').replace('\/','++','gi'));"});
Then I obtain the following string :
org-protocol://store-link://file:++C:++Temp++File.pdf
This time when I use C-c C-l, I have the proposition :
file:++C:++Temp++File.pdf
So I can get the full path when I replace afterwards each '++' to '/'.
Quite tricky to get the final full link !!
Do you have a more direct and simplest way to get the direct right link ?
Re: [O] taskjuggler3 export
Hi,
I use the following testtj3.org file that I export to taskjuggler 3.0 :
,
|#+TITLE: testtj3.org
|#+PROPERTY: Effort_ALL 2d 5d 10d 20d 30d 35d 50d
|
|* Action list :taskjuggler_project:
|** TODO Test tj3 A
|:PROPERTIES:
|:Effort: 1w
|:allocate: toA
|:END:
|** TODO Test tj3 B
|:PROPERTIES:
|:Effort: 1w
|:allocate: toB
|:BLOCKER: previous-sibling
|:END:
|** TODO Test 2 tj3
|:PROPERTIES:
|:Effort: 2w
|:allocate: toA
|:BLOCKER: previous-sibling
|:END:
|** TODO Test 2 tj3 B
|:PROPERTIES:
|:Effort: 2w
|:allocate: toB
|:BLOCKER: previous-sibling
|:END:
|* Ressources :taskjuggler_resource:
|** A
|:PROPERTIES:
|:resource_id: toA
|:END:
|** B
|:PROPERTIES:
|:resource_id: toB
|:END:
|
|# Local Variables:
|# org-export-taskjuggler-target-version: 3.0
|# org-export-taskjuggler-default-reports: ("include \"gantexport.tji\"")
|# End:
`
As you can see, I define in the org-export-taskjuggler-default-reports
variable at the end of the file that I want to use gantexport.tji where the
gant output directives are defined. This file is in the same directory as org
file.
The gantexport.tji is the following :
,-
|### begin report definition
|
|taskreport "Gantt Chart" {
| headline "Project Gantt Chart"
| columns hierarchindex, name, start, end, effort, duration, completed,
chart
| timeformat "%Y-%m-%d"
| hideresource 1
| formats html
| loadunit shortauto
|}
`-
Then the instruction tj3 testtj3.tjp generate the gant chart accessible
in "Gantt Chart.html" file.
Hope that can help.
Re: [O] TaskJuggler 3.1 export (tj3)
John Hendy gmail.com> writes: > > On Wed, Feb 1, 2012 at 6:25 AM, d.tchin voila.fr> wrote: > > Hello, > > > > Rainer M Krug gmail.com> writes: > > > Even so, see my most recent thread > (http://www.mail-archive.com/emacs-orgmode gnu.org/msg51502.html). > Even if that patch works, it's not a viable solution. It sets a > "default" value, but this is really *the* value as in there's no way > to override it from the file. If you want a different export format, > you have to edit your emacs config. The variable should be called > 'org-taskjuggler-export-report'. I think the ability to include a .tji > file is the way to go. Write your report definition, add =include > "reports.tji"= to the exporter and you're all set. Thank you for the suggestion and for the link to thread. After several trials and make it work. As far I understand the tj2 is not maintained anymore and if users want to use the taskjuggler they will obtain tj3 version. Maybe this configuration should be described in the info file or perhaps in the tutorial. > > John > > > This change is apparently not implemented in the current org-taskjuggler.el > > file. > > > > Thanks for the help and I would to thank people who invest their time and skill to develop orgmode and all these extensions. Regards
Re: [O] TaskJuggler 3.1 export (tj3)
Hello,
Rainer M Krug gmail.com> writes:
>
>
> Hi
>
> I would like to use the export to taskjuggler, but somehow I don't get
> it working - might be me or the fact that I have taskjuggler 3.1.0.
>
> I am trying the example on
>
> http://orgmode.org/worg/org-tutorials/org-taskjuggler.html
>
> but I somehow don't get it to work.
>
I tried to make this example work with tj3 some time ago but I didn't manage
to make it work with the current taskjuggler export procedure. It seems that
the instruction change a lot beetween tj2 and tj3 and as far I understand the
export function was written for tj2.
> My questions are:
>
> 1) does the taskjuggler export work with tj3 (version 3.1.0) (John
> Hendy says it doesn't ("taskjuggler (tj3) export issues and
> proposals"), but there are patches which should have made it work
> (e.g. Christian Egli, "small edits to org-taskjuggler.el for tj3").
> So: what is the actual status?
>
I put here the link where you can see the change.
Indeed it works with the change proposed by this patch.
http://thread.gmane.org/gmane.emacs.orgmode/40550
This change is apparently not implemented in the current org-taskjuggler.el
file.
Re: [O] [bug] alias for list-diary-entries-hook creates loop in emacs 24
Eric S Fraga ucl.ac.uk> writes: > > Hello, > > one of the recent updates > > commit d6e40fb3472761ed51795f54491b969976167116 > > to org has caused a problem with the latest emacs snapshot (version from > 5 January I believe). Specifically, the alias for > list-diary-entries-hook would appear to create an alias loop as > diary-lib.el in emacs already has an alias. > > Removing two lines from org-agenda.el (patch attached) fixes the problem > (for me). I am not suggesting this as a patch as it would appear that > an emacs version specific check should probably be made? I don't know > enough about this to suggest a proper solution unfortunately. > > thanks, > eric > I think this bug is related to the correction of a bug I recently submitted related to emacs 22.3. Please follow the link below : http://article.gmane.org/gmane.emacs.orgmode/50960 Hope that can make help. Regards
Re: [O] [org-babel] break when used with header in emacs 22.3
Eric Schulte gmx.com> writes: > This same issue was raised recently on the mailing list and (I believe) > a patch has been pushed to the git repository. Would you mind checking > if the problem persists in the git head? > I download org-latest.zip archive and test it. This version solves this problem. I have a side effect : the agenda display doesn't work anymore. I have the following message when I stroke C-c a a. Press key for agenda command: let*: Symbol's value as variable is void: diary-list-entries-hook > Thanks, > > > > > > Thanks
[O] [org-babel] break when used with header in emacs 22.3
Hi, I would like to report a problem of evalation when org-babel is used with emacs 22.3 on windows and recent org-mode 7.8.03. I use the following code : #+begin_src sh :results silent ls #+end_src It breaks when a header is used. When evaluated with C-c C-c, the following message appears : matched: Wrong type argument: listp, 58 The configuration is the following : Org-mode version 7.8.03 GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of 2008-09-06 on SOFT-MJASON Mark set With the following version of emacs, it works : GNU Emacs 23.3.1 (i386-mingw-nt5.1.2600) of 2011-03-10 on 3249CTO Regards
[O] org-velocity load problem
Hi all, This post just to warn that org-velocity is not loaded with Emacs 22.3.1. I try to load org-velocity but I have the following message : error: Unknown keyword :safe I use GNU Emacs 22.3.1 (i386-mingw-nt6.1.7601) and Org-mode version 7.7. I had the possibility to try with emacs 23.3 with the same org-mode version and it is loaded correctly. After investigation, it seems related to custom.el file. Indeed the keyword is defined in the later version of emacs.
[Orgmode] Re: Bug ? : org-babel and calc : calc-command-flags
Eventually I prefer to use the following instruction in the buffer where I will use calc with babel. #+begin_src emacs-lisp :results silent (require 'ob-calc) (defvar calc-command-flags nil) #+end_src Thank you for your help. d.tchin ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Bug ? : org-babel and calc : calc-command-flags
Eric Schulte gmail.com> writes: > > Hi d.tchin, > Hi Eric > This problem is caused because (as you point out) the calc-command-flags > variable is not defined. In my Emacs version calc-command-flags is > provided by (require 'calc) which is part of Babel's calc support, this > variable must be part of another package in your distribution. > Strange as I can load calc package in emacs. Indeed when I try to get information on this variable with C-h v, there is nothing. I have a look on calc.el and I have the following lines (1428): (defvar calc-aborted-prefix nil) (defvar calc-start-time nil) (defvar calc-command-flags) (defvar calc-final-point-line) (defvar calc-final-point-column) Indeed, when I tried to use C-h v on the two first variable, it match. But not for the following. The main difference is that the first two variable have the nil value and not the following. > As a work around you should find which calc package provides the > calc-command-flags variable and manually require that package, which > should resolve this problem. More generally it may be useful to upgrade > from Emacs 22 if that is an option. > I put a (require 'calc) in my .emacs. It is still not working. I decide to put the following instruction in my .emacs : (require 'calc) (defvar calc-command-flags nil) Then it works ! It seems that there is problem of initialization of this variable. Shouldn't this variable be initialized by default in calc ? Thank you for your help. d.tchin > Best -- Eric > ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Bug ? : org-babel and calc : calc-command-flags
Hello, I tried to use calc with babel but it doesn't work as expected. I use the following block with simple instruction : #+begin_src calc 2*3 #+end_src I didn't get back any results. I launch calc and it seems to be called as I have following output --- Emacs Calculator Mode --- 1: 6 . So the instructions seems to be sent to calc. I have the following message error message : executing Calc code block... calc-push-list: Symbol's value as variable is void: calc-command-flags I use : GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of 2008-09-06 on SOFT-MJASON Org-mode version 7.4 Regards d.tchin ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Property inheritance in Org-collector
Eric Schulte gmail.com> writes: I used new version of org-collector as you suggested. It works well. Thank you. Regards. ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Property inheritance in Org-collector
Christian Moe christianmoe.com> writes: > > Hi, > > I'm trying to use an Org document as the database for a textbook > analysis and Org-collector.el to output reports. > > With org-use-property-inheritance set to `t', and working in sparse > trees, I fail to get inherited properties to show up in the dynamic > block: the value returned is 0. Is this the expected behavior, and is > there any way to change things so I can get inherited properties? > I am interested by this too. I tried to have inherited properties and had the same problem whereas I fixed org-use-property-inheritance to 't. I test that inheritance work with the following test : * Inheritance #+BEGIN: propview :cols (ITEM test) :scope tree :conds ((string= test "appear")) | "ITEM"| "test" | |---+--| | "First level" | "appear" | |---+--| | | | #+END: #+BEGIN: propview :cols (ITEM CATEGORY) :scope tree :conds ((string= CATEGORY "level")) | "ITEM" | "CATEGORY" | |--+| | "First level"| "level"| | "Test inheritance 1" | "level"| | "Test inheritance 2" | "level"| |--+| | || #+END: ** First level :PROPERTIES: :test: appear :CATEGORY: level :COLUMNS: %34ITEM %plats %ingredient :END: *** Test inheritance 1 (org-entry-get (point) "test" t) Test inheritance 2 (org-entry-get (point) "test" t) ** Second level *** Test inheritance 3 (org-entry-get (point) "test" t) I expect to have the same behavior for CATEGORY and test properties. If you evaluate lisp expression you will notice that inheritance seems to works. ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Agenda and weather forecast
Hi, Just to follow previous discussion about having city. Julien Danjou add a new entry in org-google-weather-format that allows to get City for which the weather is asked for. It is possible to customize this variable. The default format is "%i %c, %l-%h %s" . If you can add %C for city : "%C %i %c, %l-%h %s". For example I have the following entry : #+CATEGORY: Meteo %%(org-google-weather "Caen" "FR") When I display agenda, I have the following : Meteo: Caen, Lower-Normandy icon Couverture nuageuse partielle, 12-22 ℃ Curiously, I have the city following by the region in english whereas the other outputs are in french as expected. ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Export function to Vcal file
Hi I see that there is org-export-icalendar-* functions. Is there a function that allows to export to *.vcs file which are recognized by Palm Os ? Regards ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Babel+gnuplot on Worg
Hi, > > > Forgive me... not sure I'm tracking completely. > > - When you say "It doesn't work under Windows" are you referring to the org- plot method? > - But org-babel does work if you use "session none" > --- Sorry, what is "session none"? I've not heard of that before. Don't be sorry, I wasn't clear. In fact org-plot doesn't on emacs running on Windows OS. With org-babel implementation it doesn't work (emacs freeze) except when I use option of :session none and direct output in png file. An example below that was in post I gave in link in previous mail : --8<---cut here---start->8--- #+begin_src gnuplot :session none :file out.png set terminal png set xlabel "gx";set ylabel "gy";set zlabel "gz" set grid xtics ytics set view 0,0 plot cos(x) #+end_src --8<---cut here---end--->8--- #+results: [[file:out.png]] ... > My apologies if I'm being dense! Just not sure exactly what it is you're looking for. I have access to a Win machine (though am normally using Linux), so if you present your problem I can try to figure out what it is and include a note about it on Worg. > In fact I am interested to know if you have same kind of problem. I thought that could be mentioned if it is the case. Many thanks to you. Regards ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Babel+gnuplot on Worg
Hi, Thank you for this document. It is really of great help. I would like to do one remark. I tried to make gnuplot work on Windows system but I never really manageg to make it work in interactive way. I first started to use org-plot. It doesn't work under Windows. In fact it seems related to way inferior process is handled in gnu emacs ? Anyway I tried to use gnuplot with org-babel. It doesn't work very well unless I use session none. Below a thread related to this question : http://thread.gmane.org/gmane.emacs.orgmode/28266/focus=28270 I don't know if this situation is the same elsewhere and if it could be corrected. Anyway this solution works for me. Perhaps if it is checked elsewhere, it could be mentioned. Regards ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Agenda and weather forecast
writes: I didn't use the level I would like to use for answering. As I reply to Juan, I like your suggestion of using CATEGORY. Thank you for your help. ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Agenda and weather forecast | multiple forecasts
Juan computer.org> writes: > > A simple way is to use the category declaration: > > #+CATEGORY: Paris > %%(org-google-weather "Paris" "FR") > #+CATEGORY: Caen > %%(org-google-weather "Caen" "FR") > #+CATEGORY: Agenda > ... other stuff > > Regards, > .j. > Thank you for your answer. In fact I was thought that the information was already in expression (org-google-weather "Paris" "FR") and the way was to extract it. But I like your suggestion. ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Agenda and weather forecast
Julien Danjou danjou.info> writes: > > Hi folks, > > If anybody is interested, I've wrote an small extension to put some > weather forecasts in the agenda. > > It can be found here[1]. I've blogged about it yesterday, so if you're > curious you can read the entry[2]. > > Happy hacking, > > [1] http://julien.danjou.info/google-weather-el.html > [2] http://julien.danjou.info/blog/ > It is really beautiful extension. I would like to ask one question. I would like to be able to do several forecast for different locations. For example I had the following entries : %%(org-google-weather "Paris" "FR") %%(org-google-weather "Caen" "FR") In the agenda I have the forecasts for the two locations but I have no idea on the output about the related locations. I have following ouput : Agenda: icon Couverture nuageuse partielle, 13-24 °C Agenda: icon Brouillard, 13-23 °C How can we had the locations. Something like : Agenda: *Paris*, icon Couverture nuageuse partielle, 13-24 °C Agenda: *Caen*, icon Brouillard, 13-23 °C Regards ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] [babel] lob evaluation : a bug ?
Hi, I try to evaluate function already defined in library-of-babel. But whatever the function I try to evaluate I have the following error output get from buffer *Messages* : setf: Wrong type argument: consp, nil For example I use the following : #+tblname: R-plot-example-data | 1 | 2 | | 2 | 4 | | 3 | 9 | | 4 | 16 | | 5 | 25 | #+srcname: R-plot(data=R-plot-example-data) #+begin_src R :session *test* plot(data) #+end_src When I evaluate block it works (with C-c C-c). Then when I try to evaluate the following line : #+lob: R-plot(data=R-plot-example-data) With C-c C-c on this line I have the following answer : Local setup has been refreshed With C-c C-v e, emacs asks me : "Evaluate this code on your system ?" I answer yes and I have the message : Wrong type argument: consp, nil I use the following versions of emacs and org-mode GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of 2008-09-06 on SOFT-MJASON Org-mode version 7.01g ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: [BABEL] Output with octave [PATCH]
Dan Davison stats.ox.ac.uk> writes:
>
> Hi Juan and d.tchin,
>
> One thing I'd like to ask for advice about is the behaviour of tabular
> data structures containing strings. For example
>
> #+begin_src octave
> ans = [['a','b'];['c','d']]
> #+end_src
>
> #+results:
> : acbd
>
> I don't know if my syntax above is correct, but it seems to me that this
> is a 2x2 table of some sort and so it would seem natural to me for that
> to return
>
> | a | b |
> | c | d |
>
> however, if you look at the code we are using below, you'll see that
> ischar() returns 1 for this object and so it gets written as a
> string. Can you suggest how we should alter the octave/matlab code
> below? Or perhaps people don't use tabular data structures containing
> strings in these languages?
>
> if ischar(ans), fid = fopen('%s', 'w'); fprintf(fid, '%%s\\n', ans); fclose
(fid);
> else, dlmwrite('%s', ans, '\\t')
> end"
>
> Dan
>
I use typeinfo defined in Octave to see what kind of object Octave would
consider as output. You can see that [["a',"b"];["c","d"]] is considered
as string and not a matrix. And the output in Octave is
ans =
ab
cd
See tests below done with character and number. Hope that can help.
--8<---cut here---start->8---
* Output typeinfo
** Character
#+begin_src octave
typeinfo("a")
#+end_src
#+results:
: string
#+begin_src octave
["c","d"]
#+end_src
#+results:
: cd
#+begin_src octave
[["a","b"];["c","d"]]
#+end_src
#+results:
: acbd
#+begin_src octave
typeinfo([["a","b"];["c","d"]])
#+end_src
#+results:
: string
** Number
#+begin_src octave
typeinfo(1)
#+end_src
#+results:
: scalar
#+begin_src octave
[1,2]
#+end_src
#+results:
: 1.e+000 2.e+000
#+begin_src octave
typeinfo([1,2])
#+end_src
#+results:
: matrix
#+begin_src octave
([[1,2];[3,4]])
#+end_src
#+results:
: 1.e+000 2.e+000
: 3.e+000 4.e+000
#+begin_src octave
typeinfo([[1,2];[3,4]])
#+end_src
#+results:
: matrix
--8<---cut here---end--->8---
___
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: [Babel] gnuplot, table entry and temporary file
write Sorry, please forget the last question. I have just seen a thread related to gnuplot that answers to this question. Below a link to this thread : http://thread.gmane.org/gmane.emacs.orgmode/27990/focus=27998 ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] [Babel] gnuplot, table entry and temporary file
Hi, Before asking my question, I would like to give few remarks about use of gnuplot with org-babel and the reason why I asked this question. I tried to use it with org-plot but I was not really satisfied as it didn't work clearly well with emacs installed on MS Windows. Below a thread about this problem : http://thread.gmane.org/gmane.emacs.orgmode/15036/focus=15032 Since gnuplot is available from Babel I tried to use to check if I have less problem with MS Windows. If I used it with session none and make a redirection to output file, it works well for me. Below an example the way I use it : --8<---cut here---start->8--- #+begin_src gnuplot :session none :file out.png set terminal png set xlabel "gx";set ylabel "gy";set zlabel "gz" set grid xtics ytics set view 0,0 plot cos(x) #+end_src --8<---cut here---end--->8--- #+results: [[file:out.png]] With org-plot it was possible to give a table in entry. Org-plot was able to write temporary file that was used by gnuplot. I haven't seen such a wrapped function for gnuplot use with babel and I wonder if it is possible to pass a table in gnuplot block that will create a generic tmpfile.dat used by gnuplot ? Is there a elisp function that could be use to create such file that could be used afterwards ? Something that could look like this : --8<---cut here---start->8--- #+tblname: tablein | A | B| ++---+ | 257.72 | 21.39 | | 165.77 | 19.68 | | 71.00 | 11.50 | | 134.19 | 14.33 | | 257.56 | 17.67 | #+lob: functiontowrite(table=tablein, filename="tmpfile_tablein.txt") --8<---cut here---end--->8--- An then use tmpfile_tablein.txt in gnuplot block. --8<---cut here---start->8--- #+begin_src gnuplot :session none :file test.png set terminal png plot 'tmpfile_tablein.txt' us 1:2 #+end_src --8<---cut here---end--->8--- Is there a tips that could be used to approach this way of doing ? ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: [BABEL] Output with octave
Hi, Dan Davison stats.ox.ac.uk> writes: > > Eric S Fraga ucl.ac.uk> writes: > > > On Fri, 23 Jul 2010 16:59:43 + (UTC), d.tchin voila.fr> wrote: > >> > >> With :results value > >> > >> --8<---cut here---start->8--- > >> #+tblname: test > >> | 1 | 2 | 3 | > >> > >> > >> > >> #+source: outtest > >> #+begin_src octave :session *out* :var vec=test :results value > >> vecb=vec; > >> vecb > >> #+end_src > >> > >> --8<---cut here---end--->8--- > >> > >> I get the following output > >> > >> > >> #+results: outtest > >> : org_babel_eoe > > OK, perhaps you or other octave users could advise us on how to proceed > here, as neither Eric Schulte nor I know octave. Note that this works: > > #+begin_src octave :session *out* :var vec=test > vecb=vec; > vecb+0 > #+end_src > > #+results: > : 1.e+00 2.e+00 3.e+00 > > octave evaluation in org works as follows: > - The user code is evaluated > - The value of the variable 'ans' is written to disk and imported into > org > > And the octave manual tells us that 'ans' is: > > , > | The most recently computed result that was not explicitly assigned to a variable > ` > > The trouble seems to be that the final expression 'vecb' doesn't count > as a computation, and so doesn't change the value of ans. > > So the current workaround is to say "when using octave, you must end > your block with a computation, rather than a simple statement of a > variable name." > > Can someone suggest a better solution? > > Dan > > p.s. Or you could do this > > #+begin_src octave :session *out* :var vec=test > vecb=vec; > ans=vecb > #+end_src > > #+begin_src octave :session *out* :var vec=test > vecb=vec; > ans=vecb > ans > #+end_src > Thank you for the help. I will use it as it works clearly clearly well. Following exchange you have with Juan Pechiar related to the way the output is displayed, I would like to submit the following examples : First test : --8<---cut here---start->8--- #+tblname: test | 1 | 2 | 3 | #+source: outtest #+begin_src octave :session *out* :var vec=test :results value vector vecb=[vec]; ans=vecb; #+end_src --8<---cut here---end--->8--- The output is the following : #+results: outtest | 1.e+000 2.e+000 3.e+000 | It is considered as one character and each element are not clearly splitted in table. Certainly handled as string as Juan Pechiar. Second test : --8<---cut here---start->8--- #+tblname: test | 1 | 2 | 3 | #+source: outtestb #+begin_src octave :session *out* :var vec=test :results value vector vecb=[vec;vec]; ans=vecb; #+end_src --8<---cut here---end--->8--- The output is the following : #+results: outtestb | 1.e+000 | 2.e+000 | 3.e+000 | | 1.e+000 | 2.e+000 | 3.e+000 | This time output is splitted in a table as it should be ? ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: [BABEL] Output with octave
Eric S Fraga ucl.ac.uk> writes: > > I don't think you are missing anything obvious as for the ":results > value" case, I get the same thing. In fact, for ":results output", I > don't actually get any output! I'm not sure why. I wonder if there > is a dependence on the version of Octave? I'm using a fairly old > version (3.0.x instead of 3.2.x). > I use following version of Octave : GNU Octave, version 3.2.0 Copyright (C) 2009 John W. Eaton and others. This is free software; see the source code for copying conditions. There is ABSOLUTELY NO WARRANTY; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. For details, type `warranty'. Octave was configured for "i686-pc-mingw32". ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] [BABEL] Output with octave
Hi I use babel to use with octave language. I use it and define a session so as to have interaction with octave process. It is great to have interaction with octave and check the action of the code easily. I have problem to get output back in org mode file. I try the following code : --8<---cut here---start->8--- #+tblname: test | 1 | 2 | 3 | #+source: outtest #+begin_src octave :session *out* :var vec=test :results output vecb=vec; vecb #+end_src --8<---cut here---end--->8--- You will get following output #+results: outtest : vec = : :1 2 3 : octave.exe> vecb = : :1 2 3 As you see I get two outputs : vec variable and vecb (with octave prompt). It is what I expected, excepted vec output. With :results value --8<---cut here---start->8--- #+tblname: test | 1 | 2 | 3 | #+source: outtest #+begin_src octave :session *out* :var vec=test :results value vecb=vec; vecb #+end_src --8<---cut here---end--->8--- I get the following output #+results: outtest : org_babel_eoe In the octave process, I check that it the last intruction. But what I would expect is to get last instruction vecb. I certainly miss something. Could someone help me on this ? ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: org-collector : display problem with propview
Eric Schulte gmail.com> writes: > > Hi, > > The following minimal patch to org-collector.el should remove tags from > the ITEM text, which will also remove the many "\n" characters. Please > let me know if this works for you. > > Thanks -- Eric > > > Attachment (org-collector-w-o-tags.patch): text/x-diff, 569 bytes > > > d.tchin voila.fr> writes: > Hi Eric, It works as expected. Thanks d.tchin ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: org-collector : display problem with propview
writes: > > Hi > ... > Subsidiary question : is it possible not to display the tag in propview > ang ITEM entry. Sorry. For this question, what I want is to get ITEM entry without the tag in propview display. > > GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of 2008-09-06 on SOFT-MJASON > Org-mode version 7.01 > > ___ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] org-collector : display problem with propview
Hi I try to use org-collector. Since I have changed org-mode to release 7.01 there is a modification in the display of propview. Below an example : - * View #+BEGIN: propview :cols (ITEM CATEGORY) :scope tree :match "Inside1" | "ITEM" | "CATEGORY" | |+--| | "Inside first a \n\n\n\n\n\n:Inside1:" | "firstentry" | | "Inside first b \n\n\n\n\n\n:Inside1:" | "firstentry" | |+--| || | #+END: #+BEGIN: propview :cols (ITEM CATEGORY) :scope tree :match "Inside2" | "ITEM" | "CATEGORY"| |--+---| | "Inside second\n\n\n\n\n\n:Inside2:" | "secondentry" | |--+---| | | | #+END: ** First entry :PROPERTIES: :CATEGORY: firstentry :END: *** Inside first a :Inside1: *** Inside first b :Inside1: ** Second entry :PROPERTIES: :CATEGORY: secondentry :END: *** Inside second :Inside2: There were "\n" added after ITEM entry then the tag. Subsidiary question : is it possible not to display the tag in propview ang ITEM entry. GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of 2008-09-06 on SOFT-MJASON Org-mode version 7.01 ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Getting a Google Maps' map for an entry
writes: > > Julien Danjou danjou.info> writes: > > > > > Hi there, > > > > I've recently wrote a Google Maps extension for Emacs[1]. > > > > Therefore, I've extended org-mode to display a Google Maps' map for an > > event location. The extension, which is very simple, is available > > here[2] and I wanted you to know about it. > > > > I'd be glad to have feedback. patches or ideas. ;) > > > > Happy hacking. > > > > [1] http://julien.danjou.info/google-maps-el.html > > > > [2] http://git.naquadah.org/?p=~jd/jd-el.git;a=blob;f=org-location-google- > maps.el;hb=HEAD > > > > Dear Julien > > I tried to use Google Maps extension. When I tried to load it, I found out > that json.el was required. It seems that this package is included in "recent" > emacs version (?). My version is GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of > 2008-09-06. I loaded it but then I have another error telling that the function > use-region-p doesn't exist. It seems that this function appears with emacs 23. > So this mail just to tell that it seems necessary to have at emacs 23 > to make this function work. Just one comment following previous mail. Just tried with emacs 23.2. It works very well on this version and it is really great. The bad thing is that this version of emacs is quite slow on Windows system. As far I understood it seems to be related to font handling. There is a lot of lag, the system freeze. So sadly I have to return to release 22.3.1 which is more robust. d.tchin ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Getting a Google Maps' map for an entry
Julien Danjou danjou.info> writes: > > Hi there, > > I've recently wrote a Google Maps extension for Emacs[1]. > > Therefore, I've extended org-mode to display a Google Maps' map for an > event location. The extension, which is very simple, is available > here[2] and I wanted you to know about it. > > I'd be glad to have feedback. patches or ideas. ;) > > Happy hacking. > > [1] http://julien.danjou.info/google-maps-el.html > > [2] http://git.naquadah.org/?p=~jd/jd-el.git;a=blob;f=org-location-google- maps.el;hb=HEAD > Dear Julien I tried to use Google Maps extension. When I tried to load it, I found out that json.el was required. It seems that this package is included in "recent" emacs version (?). My version is GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of 2008-09-06. I loaded it but then I have another error telling that the function use-region-p doesn't exist. It seems that this function appears with emacs 23. So this mail just to tell that it seems necessary to have at emacs 23 to make this function work. Best regards ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: org-babel-R and windows ?
Dan Davison stats.ox.ac.uk> writes: > The org-babel default is to invoke R as an external shell command, and I > think this is what is causing the problem. It requires that the emacs > function shell-command can use the string "R" to invoke an R process, > i.e. the R installation and the shell path must be such that this is the > case. Thank you for the information and explanation. It seems that the problem comes from the windows shell. I try the following : I explicitely told emacs to use bash with the following instructions : (setq explicit-shell-file-name "C:/msys/1.0/bin/bash.exe") (setq shell-file-name explicit-shell-file-name) It works with bash. > > #+srcname:trial > #+begin_src R :session org-babel-R-session >c(4,5,6,7,8,9) > #+end_src The "session" way works too. Thank you. ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] org-babel-R and windows ?
I need help to be able to use org-babel functionality.
I use emacs 22.3.1 in windows XP and org-mode 6.34.
I have the following instructions in .emacs
(require 'org-install)
(require 'org-plot)
(require 'org-babel-init)
(require 'org-babel-R) ;; requires R and ess-mode
(require 'org-babel-python);; requires python, and python-mode
(require 'org-babel-ditaa)
ESS module is loaded before :
(load "~/emacs/emacs-22.3/site-lisp/ess-5.7.1/lisp/ess-site")
I don't manage to get any output with R Software.
Below you will find test I have done :
#+srcname:trial
#+begin_src sh
echo output
#+end_src
#+results: trial
: output
#+srcname:trial
#+begin_src R
c(4,5,6,7,8,9)
#+end_src
I manage to have shell output, but when I tried R procedure,
I have the following output in *Messages* buffer
executing R source code block...
Syntaxe du nom de fichier, de répertoire ou de volume incorrecte.
Source block produced no output
I have a look on temporary directory and I have the folllowing
file :
R-in-functional-results4452lyl
Inside the following source code :
main <- function ()
{
c(4,5,6,7,8,9)
}
write.table(main(), file="c:/Temp/emacs/tmp/R-out-functional-results4452y8r",
sep="\t", na="nil",row.names=FALSE, col.names=FALSE, quote=FALSE)
The file R-out-functional-results4452y8r exists but is empty.
What I miss to make it work ?
Regards
___
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Latex export and label entries
Hi
Carsten Dominik gmail.com> writes:
>
> Hi,
> On Dec 2, 2009, at 2:51 PM, d.tchin voila.fr wrote:
>
> >
> > Hi,
> >
> > I use org-export-latex to create latex powerdot
> > file. I make adaptation of template defined for
> > beamer class and it works quite well.
> >
> > I have a problem I would like to submit :
> >
> > By default in each section or slide (frame) environment,
> > there is a label added by default. This instruction
> > is not recognized by powerdot class. Is there a way
> > to prevent org-export-latex function to add such label
> > entries ?
>
> a work-around would be to add this to your powerdot definition of org-
> export-latex-classes:
>
> \def\label#1{}
>
Thank you for the advice. I add the instruction you suggest.
with org-export-latex-classes. In fact it work if this intruction
appears after \begin{document}.
I have managed to add it before \begin{document} with
org-export-latex-classes but not after . How could I make appear
this intruction only one time after \begin{document} ?
Regards
___
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Latex export and label entries
Hi,
I use org-export-latex to create latex powerdot
file. I make adaptation of template defined for
beamer class and it works quite well.
I have a problem I would like to submit :
By default in each section or slide (frame) environment,
there is a label added by default. This instruction
is not recognized by powerdot class. Is there a way
to prevent org-export-latex function to add such label
entries ?
My document is following
#+LaTeX_CLASS: powerdot
#+TITLE: Presentation
#+AUTHOR: author
#+OPTIONS: H:2 num:t toc:nil
* Test 1
** Test in 1
*** Test in 1 in 1
* Test 2
** Test in 2
*** Test in 2 in 2
If you want to reproduce, you can substitute powerdot
by beamer for LaTeX_CLASS definition. You will find in
tex file the following :
\section{Test 1}
\label{sec-1} <=
Thanks
Michael Jackson, Susan Boyle, Black Eyed Peas ... Retrouvez leurs derniers
titres sur http://musiline.voila.fr
___
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] org-plot : interaction problem with gnuplot
Hi Thank you for your help. 1°) I try to use comint buffer and to launch few commands. I don't really understand the way comint works but it seems that each time that I use a command, there is a freeze, and to access back to the emacs buffer I have to use \C-g several times. 2°) I put the instruction you suggested. I try to use org-plot/gnuplot and I have the following output on message buffer: OVERVIEW org-plot/gnuplot CHILDREN Loading d:/perso/home/emacs/emacs-22.2/lisp/org/lisp/org-plot.el (source)...done script is reset set title 'Citas' set yrange [0:] progn: Wrong number of arguments: (lambda (line) (block add-to-script (setf script (format "%s %s" script line, 2 Mark set Thanks > Message du 26/06/09 à 03h37 > De : "Eric Schulte" > A : d.tc...@voila.fr > Copie à : emacs-orgmode@gnu.org > Objet : Re: [Orgmode] org-plot : interaction problem with gnuplot > > > d.tc...@voila.fr writes: > > > Hi, > > > > I would like to use gnuplot with org-mode tabular function.But I > > haven't managed to use it until now. > > I would like to submit to you few remarks I have done. > > > > I use GNU Emacs 22.2.1 (i386-mingw-nt5.1.2600) on Microsoft Windows XP OS. > > I have installed gnuplot and I can use it with gnuplot-mode. > > > > I tried to follow the tutorial of Eric Schulte but I didn't manage to get a > > plot of > > simple example extracted from the tutorial. > > > > I use these data defined in a file orgplot.org : > > #+PLOT: title:"Citas" ind:1 deps:(3) type:2d with:histograms set:"yrange > > [0:]" > > | Sede | Max cites | H-index | > > |+---+-| > > | Chile | 257.72 | 21.39 | > > | Leeds | 165.77 | 19.68 | > > | São Paolo | 71.00 | 11.50 | > > | Stockholm | 134.19 | 14.33 | > > | Morelia | 257.56 | 17.67 | > > > > > > When I use org-plot/gnuplot, gnuplot is launched with only the reset command > > and emacs is totally freezed. To get back to emacs, I use \C-g command. > > > > Hmm, it is not clear to me what is happening here. It is possible that > the problem is somehow related to running on a windows machine, as I > have only personally tested org-plot on linux and Mac OS's. > > The only two things I can think of at the moment are > 1. the reset command is freezing on your machine, you could test this > out by starting up a gnuplot comint buffer and entering the "reset" > command > 2. for some reason the script is not being set to the correct value, you > could test this by adding the following line > > (message "script is %s" script) > > right after line 263 in lisp/org-plot.el, then reloading that > function (with C-M-x) and running org-plot-gnuplot again, checking > the message buffer to see the contents of the script variable. > > Sorry I can't be of more help. If I find time I may re-write org-plot > to use org-babel (see any of my other recent emails for more information > on org-babel) which could eliminate this problem. > > Please do let me know the results of looking into the above suggestions, > or if you have any ideas breakthroughs. > > Thanks -- Eric > > > > > I have checked few things : > > > > - org-plot/gnuplot managed to build a temporay file org-plot with the > > following > > data > > > > "Chile" 257.72 21.39 > > "Leeds" 165.77 19.68 > > "São Paolo" 71.00 11.50 > > "Stockholm" 134.19 14.33 > > "Morelia" 257.56 17.67 > > > > That looks right > > > > > > - I suppose that org-plot/gnuplot builds a temporary buffer with the > > instructions > > that will be sent to gnuplot. I checked that *gnuplot* buffer with > > gnuplot-show-gnuplot-buffer. There is only the reset command. > > > > That makes sense, it is still possible that the entire command is being > constructed, but that Emacs is freezing before anything after the > "reset" line are evaluated and dropped into the *gnuplot* buffer. The > above `message' statement should resolve whether this is the case. > > > > > Do you have any idea to solve this problem ? > > > > Regards > > > > Tchin > > > > > > > > > > > > > > > > Découvrez Cocoon et Catpower dans notre sélection musicale folk sur Voila > > http://musiline.voila.fr > > > > > > > > > > ___ > > Emacs-orgmode mailing list > > Remember: use `Reply All' to send replies to the list. > > Emacs-orgmode@gnu.org > > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > Retrouvez les meilleurs titres de Michael Jackson sur http://musiline.voila.fr/player/createtag/935918 ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] org-plot : interaction problem with gnuplot
Hi, I would like to use gnuplot with org-mode tabular function.But I haven't managed to use it until now. I would like to submit to you few remarks I have done. I use GNU Emacs 22.2.1 (i386-mingw-nt5.1.2600) on Microsoft Windows XP OS. I have installed gnuplot and I can use it with gnuplot-mode. I tried to follow the tutorial of Eric Schulte but I didn't manage to get a plot of simple example extracted from the tutorial. I use these data defined in a file orgplot.org : #+PLOT: title:"Citas" ind:1 deps:(3) type:2d with:histograms set:"yrange [0:]" | Sede | Max cites | H-index | |+---+-| | Chile |257.72 | 21.39 | | Leeds |165.77 | 19.68 | | São Paolo | 71.00 | 11.50 | | Stockholm |134.19 | 14.33 | | Morelia|257.56 | 17.67 | When I use org-plot/gnuplot, gnuplot is launched with only the reset command and emacs is totally freezed. To get back to emacs, I use \C-g command. I have checked few things : - org-plot/gnuplot managed to build a temporay file org-plot with the following data "Chile" 257.72 21.39 "Leeds" 165.77 19.68 "São Paolo"71.00 11.50 "Stockholm" 134.19 14.33 "Morelia" 257.56 17.67 - I suppose that org-plot/gnuplot builds a temporary buffer with the instructions that will be sent to gnuplot. I checked that *gnuplot* buffer with gnuplot-show-gnuplot-buffer. There is only the reset command. Do you have any idea to solve this problem ? Regards Tchin Découvrez Cocoon et Catpower dans notre sélection musicale folk sur Voila http://musiline.voila.fr ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
