]
Sent: Wednesday, September 17, 2014 10:21 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] 5i25 configuration
On Wed, 17 Sep 2014, Kasey Matejcek wrote:
Date: Wed, 17 Sep 2014 09:56:47 -0500
From: Kasey Matejcek ka...@lkm.bz
Reply-To: Enhanced Machine Controller (EMC)
emc
if you look at the rear of the 5i25 , their should be a sticker , saying
what version of firmware is flashed to the
5i25 , it will probably say as an example 7i76x2 , we will need this to
help further
i'm guessing that it will be something similar or the same , and in this
case shows the card
On 17 September 2014 08:36, David Armstrong cncbas...@gmail.com wrote:
using the 5i25 will need a different firmware loading
into the 5i25 using the mesaflash windows utility program
There is a Linux Mesaflash too.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
I have tried flashing the firmware on it with the mesa utility prob_rfx2 and
no change
I've even loaded hal manual loaded the driver and did a show for the pins
there were no stepgen pins listed include it after dmseg
Here is the complete dmesg
Print file information:
RUN_IN_PLACE=no
On 17 September 2014 12:58, Kasey Matejcek ka...@lkm.bz wrote:
I have tried flashing the firmware on it with the mesa utility prob_rfx2 and
no change
You need to completely power-off the computer for the new firmware to show up.
--
atp
If you can't fix it, you don't own it.
On Wednesday 17 September 2014 07:58:04 Kasey Matejcek did opine
And Gene did reply:
I have tried flashing the firmware on it with the mesa utility
prob_rfx2 and no change
I've even loaded hal manual loaded the driver and did a show for the
pins there were no stepgen pins listed include it
Yes did a complete shutdown and power up
Including unplugging the computer to make sure and still no change
-Original Message-
From: andy pugh [mailto:bodge...@gmail.com]
Sent: Wednesday, September 17, 2014 7:05 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] 5i25
...@gmail.com]
Sent: Wednesday, September 17, 2014 7:05 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] 5i25 configuration
On 17 September 2014 12:58, Kasey Matejcek ka...@lkm.bz wrote:
I have tried flashing the firmware on it with the mesa utility
prob_rfx2 and no change
You need
I currently have a mesa 5i25 PCI card
I don't have and add on cards
I would like to connect 3 axis stepper machine to this card
When I run the pnconf wizard and select prob_rfx2 for firmware
Finish the wizard try to open the new machine I get error
hm2_5i25.0.stepgen.00.dirsetup not found
On Tuesday 16 September 2014 21:29:35 Kasey Matejcek did opine
And Gene did reply:
I currently have a mesa 5i25 PCI card
I don't have and add on cards
I would like to connect 3 axis stepper machine to this card
When I run the pnconf wizard and select prob_rfx2 for firmware
Finish the
Newer mesa cards, such as the 5i25, store the FPGA firmware in a flash
chip. This can be changed by use of the mesaflash program, which should
be available via the package manager if it is not preinstalled.
The mesa manual (the pdf you can get at mesanet.com) describes how to
use mesaflash at
11 matches
Mail list logo