Re: [Emc-users] Gmoccapy tool change broken

2015-05-19 Thread Marius Liebenberg
>On 19 May 2015 at 11:23, Marius Liebenberg >wrote: > >>> Is that the same thing? I haven't installed "features" (though it >>> looks really good, and I keep meaning to) but I don't think it would >>> use the same FEATURES mask. >> >> Yes it is the same features from Nick but I have yet to g

Re: [Emc-users] Gmoccapy tool change broken

2015-05-19 Thread andy pugh
On 19 May 2015 at 11:23, Marius Liebenberg wrote: >> Is that the same thing? I haven't installed "features" (though it >> looks really good, and I keep meaning to) but I don't think it would >> use the same FEATURES mask. > > Yes it is the same features from Nick but I have yet to get it to work.

Re: [Emc-users] Gmoccapy tool change broken

2015-05-19 Thread Marius Liebenberg
Do you have FEATURES=12 inside the [RS274NGC] section? >>> >> Andy I have tried features 30 and 32 as I also have the >>linuxcnc_features in >> the mix. > >Is that the same thing? I haven't installed "features" (though it >looks really good, and I keep meaning to) but I don't think it would >

Re: [Emc-users] Gmoccapy tool change broken

2015-05-19 Thread andy pugh
On 19 May 2015 at 11:00, Marius Liebenberg wrote: >> Do you have FEATURES=12 inside the [RS274NGC] section? >> > Andy I have tried features 30 and 32 as I also have the linuxcnc_features in > the mix. Is that the same thing? I haven't installed "features" (though it looks really good, and I keep

Re: [Emc-users] Gmoccapy tool change broken

2015-05-19 Thread Marius Liebenberg
>On 19 May 2015 at 10:45, Marius Liebenberg >wrote: >> I am not sure if this is a bug with tool change or with the paths. I >> cannot do a tool change as an error comes up saying that the named >> parameter # is not found. > >G-code access to INI file variables is controlled by an INI config

Re: [Emc-users] Gmoccapy tool change broken

2015-05-19 Thread andy pugh
On 19 May 2015 at 10:45, Marius Liebenberg wrote: > I am not sure if this is a bug with tool change or with the paths. I > cannot do a tool change as an error comes up saying that the named > parameter # is not found. G-code access to INI file variables is controlled by an INI config item. http:/

[Emc-users] Gmoccapy tool change broken

2015-05-19 Thread Marius Liebenberg
I am not sure if this is a bug with tool change or with the paths. I cannot do a tool change as an error comes up saying that the named parameter # is not found. Firstly, the parameter is in the ini file and further I have selected to not use the auto tool measure feature. I have also found pro