I am in the process of setting up classic-ladder for the tool-changer on my
Hitachi-Seiki NH500 Turret lathe. I am using a mesa 5i20 card for inputs and
opto22 relays. For each tool position it uses a combination of inputs from six
switches that follow 6 cams on a drum to dictate position
On 16 June 2011 06:50, Clint Washburn cl...@clintandheidi.com wrote:
I am in the process of setting up classic-ladder for the tool-changer on my
Hitachi-Seiki NH500 Turret lathe
If you are comfortable with Ladder, then that is probably a good way to go.
However, I think if I was trying to
My turret is a bit simpler but all my config files are here including my
clp file.
http://gnipsel.com/shop/hardinge/hardinge.xhtml
John
Clint Washburn wrote:
I am in the process of setting up classic-ladder for the tool-changer on my
Hitachi-Seiki NH500 Turret lathe. I am using a mesa
Clint - my Tsugami lathe is similar, except it had a 3phase AC motor
with hi and lo gearing for rotation - but did include the binary cams
(position, top-dead center and a PARITY bit!) - although that setup did
prove to be less-than-optimal in the long run (I have since converted
the turret
On Wed, 15 Jun 2011 22:50:37 -0700
Clint Washburn cl...@clintandheidi.com wrote:
Does this make sense to anyone? Has anyone used this type of
classic-ladder program for their tool-changer? Does anyone have
an .clp program that would illustrate how to go about this so I can
get an idea of
This is the tool change component I use for the tool changer on my Enshu 3
axis mill. This mill has a chain matrix on the side of the machine, a random
tool changer and a swing arm to change the tool in the spindle with the tool
in the tool change pot
use, copy, modify at your pleasure
