sourceforge.net
> Subject: Re: [Emc-users] pin configuration for diy xyz stepper controller
>
> On 10 April 2010 19:10, N Z wrote:
>
> > net all-homes-and-limits <= parport.0.pin-13-in
>
> > Did i make any obvious mistake, or is there a way to ignore also the other
On 10 April 2010 19:10, N Z wrote:
> net all-homes-and-limits <= parport.0.pin-13-in
> Did i make any obvious mistake, or is there a way to ignore also the other
> limit switches during homing?
I thought you had at first, but then noticed that you linked the other
pins to this signal later.
I
To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] pin configuration for diy xyz stepper controller
>
> Andy Pugh pravi:
> > ie, assuming that Pin 11 is the "all limits and all homes" pin then
> > set it to be the combined pin for the X axis and then
Andy Pugh pravi:
> ie, assuming that Pin 11 is the "all limits and all homes" pin then
> set it to be the combined pin for the X axis and then edit the hal
> file to combine all the axes on one pin.
> Something like:
> net all-homes-and-limits parport.0.pin-11-in-not => axis.0.home-sw-in
> axis.0.
On 9 April 2010 15:43, N Z wrote:
> I have all limit switches connected on one pin and would like to use them
> also for homing.
> but there is no info... Is there a reason for this option not beeing
> available?
All options are available, but not all options have been "interesting"
enough for
Dear all
this might be a newbie question, but I am very new to CNC and EM2, so please
excuse :-)
My machine is a diy tabletop
I have been playing with the EMC2 Live CD based on Ubuntu 6.06 "Dapper Drake"
and
had some trouble to configure the pins correctly:
1. Homing and limit
