Hello,
i am still using n-words ( line numbers, old habbits die hard ).
However when the line contains o-words, currently (2.3.1) no other words
may be present.
The attached small patch to Interp::read_items allows o-words with
n-words without changing any other behaviour (methinks).
Would
Hello Chris, thanks
i see, i suspect as the stock classic ladder need some tweek
to be integrated in the emc chain.
i try later to get the LATEST 2.3.1 and see the changes
my dude now is i get the updated via Synaptic the last week
so i need to se why no get V2.3.1-
I want to play with Modbus..
2009/6/29 juanjo j...@arnet.com.ar:
i try later to get the LATEST 2.3.1 and see the changes
my dude now is i get the updated via Synaptic the last week
so i need to se why no get V2.3.1-
This page explains why, and how to upgrade:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UpdatingTo2.3
--
Dear all,
Today, I download emc2_2.3.1 and successful update my emc2. Yet, why I
cannot open hal meter and hal scope in sim and hm2-servo configuration?
I click the button of meter and scope in machine menu but it has not any
response. How to install the above function?
Thank!
Howard
Gentlemen,
Ubuntu 6.06
EMC2-trunk (git pull this morning)
Cinci 5axis machine
the var %I7 shows on
the section dislay %I7 is not on and the lube timer does not run
screen shot is here http://imagebin.org/53991
config files are here www.mpm1.com:8080/cinci.*
on shutdown I
On Mon, Jun 29, 2009 at 10:19:18AM -0500, Stuart Stevenson wrote:
Gentlemen,
Ubuntu 6.06
EMC2-trunk (git pull this morning)
Cinci 5axis machine
the var %I7 shows on
the section dislay %I7 is not on and the lube timer does not run
screen shot is here
Chris,
Argh - reading and thinking
Where is the automagic script?
Thanks - I will work on it :)
Stuart
Sent via BlackBerry from T-Mobile
-Original Message-
From: Chris Radek ch...@timeguy.com
Date: Mon, 29 Jun 2009 11:39:45
To: Enhanced Machine Controller
I just got back and looked at the configs and wiki. I don't use %W's.
The link did not help me.
I
On Mon, Jun 29, 2009 at 11:39 AM, Chris Radekch...@timeguy.com wrote:
On Mon, Jun 29, 2009 at 10:19:18AM -0500, Stuart Stevenson wrote:
Gentlemen,
Ubuntu 6.06
EMC2-trunk (git pull this
Is there another place to look?
On Mon, Jun 29, 2009 at 2:56 PM, Stuart Stevensonstus...@gmail.com wrote:
I just got back and looked at the configs and wiki. I don't use %W's.
The link did not help me.
I
On Mon, Jun 29, 2009 at 11:39 AM, Chris Radekch...@timeguy.com wrote:
On Mon, Jun 29,
Stuart Stevenson wrote:
Is there another place to look?
On Mon, Jun 29, 2009 at 2:56 PM, Stuart Stevensonstus...@gmail.com wrote:
I just got back and looked at the configs and wiki. I don't use %W's.
The link did not help me.
I
Did you notice the part where it says to connect the C pin
yes
I didn't think I was to that point yet. I don't see the state of the
%I7 contact change to start the timer.
How do I connect the C pin to the E pin?
thanks
Stuart
On Mon, Jun 29, 2009 at 3:03 PM, Stephen Wille Padnosspad...@sover.net wrote:
Stuart Stevenson wrote:
Is there another place to
Stuart Stevenson wrote:
yes
I didn't think I was to that point yet. I don't see the state of the
%I7 contact change to start the timer.
How do I connect the C pin to the E pin?
What I did when going through this with a user was to open the CL
editor, go to edit mode, select the vertical wire
Stuart,
I missed some of the chat on this but in your image you need to connect C and E
together
or the timer will not work.
http://www.linuxcnc.org/docview/html//ladder_classic_ladder.html#r1_7_3
John
On 29 Jun 2009 at 14:56, Stuart Stevenson wrote:
I just got back and looked at the
I don't know CL well either.
Let me modify the question about how to link C and E.
I have two rungs. The add button seems to only want to edit the other
rung. How do I get it to change rungs so I can add a link between C
and E?
On Mon, Jun 29, 2009 at 3:21 PM, Stephen Wille
John,
The problem (at this time) is not the knowledge of the needed
change it is the how to do it. I do not know how to get the CL editor
to edit the rung the timer is in. The CL editor picks the other rung
to edit.
thanks
Stuart
On Mon, Jun 29, 2009 at 5:10 PM, John Thorntonbjt...@gmail.com
I just tried to download a git install. I got the message
stus...@linuxcnc1:~$ git clone git://git.linuxcnc.org/git/emc2.git emc2-dev
Initialized empty Git repository in /home/stustev/emc2-dev/.git/
fatal: The remote end hung up unexpectedly
fetch-pack from 'git://git.linuxcnc.org/git/emc2.git'
premature - wait a minute helped
--
you can lead a person to knowledge
but you cannot make him think
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
I am working on manual tool change code that allows you to use
jogging/mdi during the tool change but I have hit a problem. Here is a
code snippet from my version of the manual toolchange Python HAL module:
import emc, hal
import rs274.options
emcStat = emc.stat();
emcCmd = emc.command()
def
Stuart,
Did you try coming away from the timer left one
segment to draw in the vertical line instead of
just jumping straight across? Sometimes CL will
refuse one thing but accept it in a different way.
(You'll have to add a short horizontal segment too.)
Also, it seems to make a difference how
You need to pick the rung you want to edit and when you pick it the side
rails turn red then select Modify in the little Editor window. Now it turns
to
bluish squares. Pick the vertical line tool (middle one on the third row of the
Editor
window and left click between the C and the E and a line
Mark wrote:
Have you looked at nc_files/gridprobe.ngc? This does probing in an X-Y
grid.
Probing is documented at
http://www.linuxcnc.org/docs/html/gcode_main.html#sub:G38.2:-Straight-Probe
Thanks for the information Mark. I have not been as diligent as I should
be in looking at the examples
I built a gantry-style plasma table. X, Y1, Y2 and Z axes, Y1 and Y2 linked
together. Before I read that Stepconf doesn't work well with gantry systems,
I actually got it to work.
I needed to change a parallel port setting for coolant flood (torch on/off)
and now the motors turn very very slowly,
Stuart:
If I understand the problem you can't edit the rung because
you have to 'make active' the rung first (each rung is 6 lines wide).
scroll the page till you see the rung you want to edit.
You should see a colour change around the left and right
sides (black to red). Red is the 'active'
You need to set emc.nmlfile to the right path to emc.nml before creating
the stat and command objects.
This is how it's done in axis:
emc.nmlfile = os.path.join(os.path.dirname(sys.argv[2]),
inifile.find(EMC, NML_FILE))
hal_manualtoolchange doesn't need to do this because it doesn't use nml
thanks guys - it is working now
On Mon, Jun 29, 2009 at 7:32 PM, Chris Morleychrisinnana...@hotmail.com wrote:
Stuart:
If I understand the problem you can't edit the rung because
you have to 'make active' the rung first (each rung is 6 lines wide).
scroll the page till you see the rung you
hi
i have another problem with loading program.
this is new fresh file from another drive.
in middle of loading error!
NEAR LINE 27726 of
//
File ending with no percent sign.
OK
Click on OK and it load ok.
when i open this file and add % sign and load again
error say
hi
every time i load new program i am getting new error.
now i have that one
near line 2 of/..
Bad character'\357' used
here is first lines
#65279;%
N2G90
G55X0Y0Z0
N4 G0 Z0.25001
N5 X17.41802 Y37.36987
N6 G1 Z-0.12328 F7.3
N7 Z-0.14828 F2.7
N8 X17.24044 Y36.61335
The problem is with the invisible characters in the text file that indicate
the end of a line.
In unix, there is only one character, a newline, or decimal value 11, or
represented as \n
In dos, the end of a line is usually represented by a carriage return
character (decimal 13, or \r), and a new
Again, it looks like you are getting non standard characters in your
programs. Use 'od' to check the contents. The program file can only
consist of regular character (a-z, 0-9, and some punctuation characters).
Also, make sure the editor you are using isn't generating a UNICODE text
file.
Hi
when i try to click on Show Hidden Files and Directories
to check box my computer freezes and i need cut power to restart.
why it happened?
Also what is the reason for Linux show files with this ~ that not exist?
i delete file and it still show with mark ~ .
Can i remove that files?
after
Hi
i be more interesting in how to avoid problem than see what causing it.
suppose something there and i have 80 000 line of code and than i need
look at each line and there 80 000 of them.
i think need some kind filter.
unfortunately CAM program windows type and it just creates every time new
to avoid a problem you need to know what is causing it.
If the problem is on the first line, then use head as a filter to only
show the first 20 lines of the output.
Just type:
od -a test.txt | head
I am not sure what your linux/unix background knowledge is but in this line:
1. od -a
32 matches
Mail list logo