i did this with my mill and am truly impressed with its repeatability. i
think you can give up on software compensation for backlash though with
your factory screws . simply make the nuts and go from there it will save
much time and effort
jeremy youngs
.
i like south central mo myself . im looking forward to finally getting
back to my 17 acres there. as this 2 yrs helping dad in upstate has really
made me see why i left 20 yrs ago
jeremy youngs
--
Android apps run
on my 17 so for taxes they are reasonable
jeremy youngs
--
Android apps run on BlackBerry 10
Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
Now with support for Jelly Bean, Bluetooth, Mapview and more.
Get
and alton is about 30 from eminence
jeremy youngs
On Sat, Feb 15, 2014 at 5:00 PM, Stuart Stevenson stus...@gmail.com wrote:
Jeremy,
All this talk about the Current River and 11 point is familiar to me. I
know only the names and locations. I don't know the land well. I have a
machine
yes, agreed 160 to doniphan in 42 minutes is a heck of a rush as well. yes
i worked for jerry do you know rocky holesapple or keith whitelock?
jeremy youngs
On Sat, Feb 15, 2014 at 5:40 PM, Stuart Stevenson stus...@gmail.com wrote:
19 south out of Winona is as close to a roller coaster
dive job that appears lucrative and acceptance will delay my return but hey
bermuda , great pay , per diem well if it comes to light im in , if not im
back in july
jeremy youngs
On Sat, Feb 15, 2014 at 6:29 PM, Stuart Stevenson stus...@gmail.com wrote:
I know a Bill Whitlock. I believe he
name is familiar , cant place it , know larry knoller?
jeremy youngs
On Sat, Feb 15, 2014 at 6:44 PM, Stuart Stevenson stus...@gmail.com wrote:
I am in Wichita Kansas.
Mike Ennis runs the shop in Eminence.
Hope the Bermuda opportunity works good for you.
On Sat, Feb 15, 2014 at 5:39
so its about a mile from brawleys powderhorn on 19 ?
jeremy youngs
On Sat, Feb 15, 2014 at 9:29 PM, Stuart Stevenson stus...@gmail.com wrote:
The shop is just south of downtown and a block west of the main street.
On Feb 15, 2014 8:25 PM, Jon Elson el...@pico-systems.com wrote:
On 02/15
alton to mt home 75 miles , i have friends and family there as well. agreed
the white and norfork are beautiful with excellent fishing indeed
jeremy youngs
On Mon, Feb 17, 2014 at 1:24 PM, Jon Elson el...@pico-systems.com wrote:
On 02/17/2014 06:28 AM, Mark Wendt wrote:
Are you guys
certain
i will be visiting you , and maybe i can gain enough knowledge to finally
give back to the project. And mr elson i will likely stop in to purchase
product from you
jeremy youngs
On Tue, Feb 18, 2014 at 1:45 PM, Stuart Stevenson stus...@gmail.com wrote:
We could probably have internet
,
also the rack and pinion lack enough gear ratio to hold position even with
1600 oz steppers . ymmv
jeremy youngs
On Tue, Feb 18, 2014 at 8:59 PM, John Alexander Stewart
ivatt...@gmail.comwrote:
Hi all; may be off topic, but am wondering about converting my Centec 2B
mill to CNC. X,Y axes
make a short call, but
usually
yep, sounds like south central mo :)
jeremy youngs
On Wed, Feb 19, 2014 at 9:16 PM, Jon Elson el...@pico-systems.com wrote:
On 02/19/2014 04:41 PM, Stuart Stevenson wrote:
Jon,
Do you have a people limit?
No, not really, as long as the weather
and legally privileged and
confidential information, and the violation of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Mon, Feb 24, 2014 at 6:20 PM, jeremy youngs jcyoung...@gmail.com wrote:
half as much huh does your drive
on rise and fall . sporadic loss of steps and dir changes were a result of
the open ground loop
jeremy youngs
On Mon, Feb 24, 2014 at 4:55 PM, John Alexander Stewart
ivatt...@gmail.comwrote:
Sam, this is really interesting. You have a very creative mind, with this
and your Emco Compact-5 CNC
! the half as much though was definitely from stepping both
on rise and fall . sporadic loss of steps and dir changes were a result of
the open ground loop
jeremy youngs
On Mon, Feb 24, 2014 at 8:00 AM, John Alexander Stewart
ivatt...@gmail.comwrote:
I had an issue on my mill - Mesa 5I25 and Gecko
/3rd of full
speed. Take them off the mill and I have to reduce the maxvel's in the
.INI to about 1/3 or 1/4. That is how important they are!
so i have to ask any pics or a link gene ? this sounds great !!!
jeremy youngs
On Thu, Feb 27, 2014 at 11:05 AM, Dave Cole linuxcncro...@gmail.com wrote
looked at it a dozen times in the last 2 yrs and didnt ever see the fender
washer item , i could have thought about going there but i was running to
an appointment and chaing down some batteries to go off grid i will check
it out gene .
jeremy youngs
On Thu, Feb 27, 2014 at 8:06 PM, Gene
jeremy youngs
On Thu, Feb 27, 2014 at 8:53 PM, jeremy youngs jcyoung...@gmail.com wrote:
looked at it a dozen times in the last 2 yrs and didnt ever see the fender
washer item , i could have thought about going there but i was running to
an appointment and chaing down some batteries to go off
hmmm i wonder is the hamonic in the shaft or the motor housing , most
likely the shaft. when i made the delrin nut it helped my stall quite a bit
i may be able to figure a way to damp the coupling , or belt drive it which
i have been considering and then damp the pulley
jeremy youngs
On Thu
ohh , i just realized i completely highjacked this thread , poor etiquette
indeed, my apologies , long hard day sorry
jeremy youngs
On Thu, Feb 27, 2014 at 10:28 PM, Jon Elson el...@pico-systems.com wrote:
On 02/27/2014 07:16 AM, Gene Heskett wrote:
I should also mention that servos do
http://pminmo.com/
this is a great site to find calculations and explanations on , i studied
it intently , good luck
jeremy youngs
On Fri, Mar 7, 2014 at 9:42 PM, Bill billbret...@gmail.com wrote:
Hi Gene and Andy
I guess I'm convinced that I need bigger motors but until I see some
gene , have a go at this
http://precisionparts.wmberg.com/timingBeltsChains
jeremy youngs
On Mon, Mar 10, 2014 at 5:17 PM, John Kasunich jmkasun...@fastmail.fmwrote:
On Mon, Mar 10, 2014, at 04:55 PM, Gene Heskett wrote:
Continuing this thread of trying to determine what belt I need
good job
jeremy youngs
On Thu, Mar 13, 2014 at 9:52 PM, Dave Cole linuxcncro...@gmail.com wrote:
I got it working. I updated the onboard Angstrom distribution on the
eMMC and it fixed the problem of loading the uSD card with LinuxCNC.
Windows OS instructions are here - look
any suggestions for a plain jane no opto breabout board? maybe with a relay
or 2? thanx
jeremy youngs
--
Put Bad Developers to Shame
Dominate Development with Jenkins Continuous Integration
Continuously Automate
solar panels and i think that it would be pretty cool to make
chips from sun power and there is not near as much sun here in upstate mew
york . good luck gene
jeremy youngs
--
Learn Graph Databases - Download FREE O'Reilly
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
jeremy youngs
--
Start Your Social Network Today - Download eXo Platform
Build your Enterprise Intranet
a kyocera and it does
very well. i strongly recommend the syl gard to encapsulate them as
any other method will burn more time and money to get right than
buying 2 panels. hope this helps , good luck
--
jeremy youngs
to be an
excellent buy and ovbiously i would not hesitate to recommend one or
replace mine with another if it gave in the ghost tomorrow with another
just like it . well thats my .02 hope it helps
jeremy youngs
On Fri, May 2, 2014 at 10:05 AM, Roland Jollivet
roland.jolli...@gmail.comwrote:
Have a look
a pic?
jeremy youngs
On Fri, May 2, 2014 at 7:53 PM, Gene Heskett ghesk...@wdtv.com wrote:
Greetings all;
The screws I have to put in this used to be a micromill, are 8mm2.5's and
have an outer diameter of about 9.25mm.
I intend to turn them down to 8mm to fit in the existing bearing
second on the optiplex
jeremy youngs
On Mon, May 19, 2014 at 10:55 AM, Jon Elson el...@pico-systems.com wrote:
On 05/19/2014 08:15 AM, toolznglue wrote:
The first is the person who’s using their machines to make a living, or
at least to turn a buck. For that user, I’d most likely
im running a 720, had an old 240 but never used it for lcnc
jeremy youngs
On Mon, May 19, 2014 at 7:53 PM, Gregg Eshelman g_ala...@yahoo.com wrote:
On 5/19/2014 5:36 PM, jeremy youngs wrote:
second on the optiplex
How about a OptiPlex GX240?
---
This email is free from viruses
still working on getting back to missouri jon, right now it looks like
august. After i get back and get things lined back up im thinking my place
provides all of the above and 7 miles from the eleven point river. but the
earliest i see that working would be next year
jeremy youngs
On Mon, May
stepconf , no coffee yet sorry :(
jeremy youngs
On Sat, Jun 28, 2014 at 7:19 AM, jeremy youngs jcyoung...@gmail.com wrote:
use the calculator in syepconf just setup a different machine if you dont
want to mess with your ini . then transfer the nubders to yours
jeremy youngs
On Sat
use the calculator in syepconf just setup a different machine if you dont
want to mess with your ini . then transfer the nubders to yours
jeremy youngs
On Sat, Jun 28, 2014 at 6:36 AM, Gene Heskett ghesk...@wdtv.com wrote:
Greetings;
My mill's old XY screws were 20 tpi acme's and have now
well gene its good to see you back at again.
jeremy youngs
On Sat, Jun 28, 2014 at 10:42 AM, Gene Heskett ghesk...@wdtv.com wrote:
On Saturday 28 June 2014 07:29:13 Philipp Burch did opine
And Gene did reply:
Hi Gene!
On 28.06.2014 12:36, Gene Heskett wrote:
Greetings;
My
gene are you drilling entrance holes? i noticed in your earlier comments
that they are breaking on the plunge iirc. i would spin it as fast as it
will turn climb only, either irrigate with a squirt bottle with water and
glycerin to reduce surface tension and some air to remove chips. i would
also
and gene did state
0.03125 mill I was using on the brass, at 7.5ipm and actually throwing
miniature chips
miniature chips ;)
i like it smells like progress
jeremy youngs
On Mon, Jul 7, 2014 at 4:29 PM, Gene Heskett ghesk...@wdtv.com wrote:
On Monday 07 July 2014 15:43:34 andy pugh did
how about a blue tooth transmitter? our mazak probes were set up that way
jeremy youngs
On Fri, Jul 18, 2014 at 11:36 AM, Tomaz T. tomaz_...@hotmail.com wrote:
Hi,
Does anyone here have any experiences with slip ring components? I'm
thinking to use it to make one of my rotating axes
didnt consider that andy , until after the send button .
cnc converted boring head? so do you have a picasa link so i can peek in
awe of your talents yet agaij ?:)
jeremy youngs
On Fri, Jul 18, 2014 at 12:46 PM, andy pugh bodge...@gmail.com wrote:
On 18 July 2014 17:39, jeremy youngs
on r and d thats why their machines are tremendous performers that will
work circles around a haas . note this is not a plug for them just user
experience and i still like cnc better ( because it lets me have a machine
:)
jeremy youngs
On Thu, Jul 17, 2014 at 3:50 PM, Gregg Eshelman g_ala
that kicks butt andy , patents be damned build a dozen and sell them
jeremy youngs
On Fri, Jul 18, 2014 at 1:41 PM, andy pugh bodge...@gmail.com wrote:
On 18 July 2014 17:52, jeremy youngs jcyoung...@gmail.com wrote:
cnc converted boring head? so do you have a picasa link
Nothing
and a local can grind them
maybe you will get a decent roi .
jeremy youngs
On Sun, Jul 20, 2014 at 9:07 PM, Kirk Wallace kwall...@wallacecompany.com
wrote:
I have a couple of 6 mill vises that came with used mills. They are
pretty well worn, but not as bad as this one:
http://www.ebay.com/itm
john this is the standby reference that i start with it is a really good
reference and the ONE that i trust most , well worth the 20 bucks.
http://www.ebay.com/itm/Machinists-Speed-Feed-Calculator-CNC-Mill-Tooling-/230704129486?pt=LH_DefaultDomain_0hash=item35b709a5ce
jeremy youngs
On Mon
when we get back to the show me state , in which
case i may put it in my vehicle and just go pay you a visit , if it is in
the shop at moms it will be a few days and i will get you that information
for now thats what i can do
jeremy youngs
On Mon, Jul 21, 2014 at 1:31 PM, John Thornton bjt
her rip !!! lol
jeremy youngs
On Mon, Jul 21, 2014 at 2:13 PM, jeremy youngs jcyoung...@gmail.com wrote:
well john !!!
the truth is I am playing hooky , packing stuff up and dont currently know
the whereabouts of said item :(
i think it may be here at the house , rather it is packed
.
http://www.practicalmachinist.com/vb/cnc-machining/aluminum-subplate-finished-180075/
then align vise drill 2 dowel holes and vise is hot swappable to .001
every time
jeremy youngs
On Mon, Jul 21, 2014 at 1:23 PM, Jon Elson el...@pico-systems.com wrote:
On 07/21/2014 11:44 AM, Stuart
malden sorry
jeremy youngs
On Mon, Jul 21, 2014 at 7:33 PM, jeremy youngs jcyoung...@gmail.com wrote:
my sister is in malsen , after 2.5 yrs back in upstate ny i am ready to
get back to the home stead in the ozarks . I do intend on visiting a few of
the membership here though and maybe
hooky
so he gave me tomorrow off ! 1 more day to work on heading south is the
way i look at that
jeremy youngs
On Mon, Jul 21, 2014 at 7:28 PM, John Thornton bjt...@gmail.com wrote:
Hey Jeremy,
Drop by any time (well call, text or e-mail me to make sure I'm home
first) I love to have
no but i have taken several exams at the pb high school near the steak and
shake
jeremy youngs
On Mon, Jul 21, 2014 at 7:44 PM, John Thornton bjt...@gmail.com wrote:
I assumed you meant Malden, which is just a few minutes away from Poplar
Bluff. Have you ever eaten at Hydes (east of PB out
thank you chris
jeremy youngs
On Tue, Jul 22, 2014 at 4:45 PM, Chris Radek ch...@timeguy.com wrote:
On Tue, Jul 22, 2014 at 08:57:21PM +0100, Steve Blackmore wrote:
On Tue, 22 Jul 2014 08:06:43 -0600, you wrote:
The new trajectory planner is not in 2.6. It's in the master branch
a few lines of code. Try New Relic
and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
jeremy youngs
/listinfo/emc-users
--
jeremy youngs
--
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance
gene here is a bit more variety
http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313.TR10.TRC2_nkw=treadmill+motor_sacat=0_from=R40
On Tue, Apr 30, 2013 at 10:55 AM, jeremy youngs jcyoung...@gmail.comwrote:
one of them had a flatted 5/8 shaft, the other it was pressed on.
if you remove
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
jeremy youngs
--
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
jeremy youngs
/emc-users
--
jeremy youngs
--
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
jeremy youngs
--
Introducing AppDynamics Lite, a free
for 180 volt no??? ( wink wink ) :))
also on the way back to mo to happen in the next 60 days do you have a
store front or let random internet strangers poke around ???
On Tue, Apr 30, 2013 at 9:35 PM, Jon Elson el...@pico-systems.com wrote:
jeremy youngs wrote:
gene
this is what jon offers
. Circuit, March
9, 2007
jeremy youngs
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph databases and
their applications. This 200-page book is written by three
and was premised on the private use of
arms for activities such as hunting and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
the Constitution and was premised on the private use of
arms for activities such as hunting and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
--
AlienVault Unified
jeremy youngs
--
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your
, March
9, 2007
jeremy youngs
--
Try New Relic Now We'll Send You this Cool Shirt
New Relic is the only SaaS-based application performance monitoring service
that delivers powerful full stack analytics. Optimize and monitor
such as hunting and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
, 2013 at 2:35 PM, Gregg Eshelman g_ala...@yahoo.com wrote:
--- On Wed, 5/22/13, jeremy youngs jcyoung...@gmail.com wrote:
From: jeremy youngs jcyoung...@gmail.com
Subject: Re: [Emc-users] Can someone quote me a price on a simple(?)
part?
To: Enhanced Machine Controller (EMC) emc-users
and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
--
Try New Relic
and was premised on the private use of
arms for activities such as hunting and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
--
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility
to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
--
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
http://www.youtube.com/watch?v=88CgdUkrk3s
here like this . if you set ti up to use a master lobe you can machine the
lobe on a cnc mill then machine it off the master lobe and produce any cam
you want
On Wed, May 29, 2013 at 3:38 PM, jeremy youngs jcyoung...@gmail.com wrote:
do you have
on the private use of
arms for activities such as hunting and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
--
Introducing AppDynamics Lite, a free
said enough :)
On Thu, May 30, 2013 at 8:29 AM, Michael Haberler mai...@mah.priv.atwrote:
Jeremy,
Am 30.05.2013 um 12:36 schrieb jeremy youngs jcyoung...@gmail.com:
i
just wish the manufactureres would give us something with a little bit
more
oomph than these bords have
, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
--
Introducing AppDynamics Lite, a free
on the private use of
arms for activities such as hunting and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
of motion, with the part manually positioned at the angle the CNC would
like
it positioned to machine.
RogerN
-Original Message-
From: jeremy youngs
Sent: Friday, May 31, 2013 6:36 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Adjustable Kinnematics
under the Constitution and was premised on the private use of
arms for activities such as hunting and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy
the Constitution and was premised on the private use of
arms for activities such as hunting and self-defense, the latter being
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
sorry sent before finished , i agree with all of the other statements
though
On Wed, Jun 12, 2013 at 8:52 AM, jeremy youngs jcyoung...@gmail.com wrote:
ted said
Even if it did, one would have to scan a known-good-master at each
step of the production for the test scan to reference against
understood as resistance to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
--
This SF.net email is sponsored by Windows:
Build
, D.C. Circuit, March
9, 2007
jeremy youngs
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
___
Emc-users mailing list
2013 13:52, jeremy youngs jcyoung...@gmail.com wrote:
not exactly just compare it to an iges file that will never change . or
other parametric solid
Going from a point-cloud to a parametric solid is not even slightly easy.
However, in this case I guess that you could create a virtual
point
to either private lawlessness or the depredations
of a tyrannical government. - U.S. Court of Appeals, D.C. Circuit, March
9, 2007
jeremy youngs
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http
to be in the right place - I don't think it's necessary to take the
human all the way out of the equation, sometimes the grey matter still
exceeds the silicon.
Ted.
On 12 June 2013 13:52, jeremy youngs jcyoung...@gmail.com wrote:
not exactly just compare it to an iges file that will never
jeremy youngs
On Sun, Jun 16, 2013 at 7:57 PM, John Alexander Stewart
ivatt...@gmail.comwrote:
Martin:
On Sun, Jun 16, 2013 at 7:02 PM, Martin Dobbins tu...@hotmail.com wrote:
C'mon John too many variables here unless you show us the G code, after
all that's what Linuxcnc runs
, student or any personnel
under your direction or control.
The contents of this profile are private and legally privileged and
confidential information, and the violation of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Sun
and legally privileged and
confidential information, and the violation of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Sun, Jun 16, 2013 at 9:15 PM, John Alexander Stewart
ivatt...@gmail.comwrote:
Hi all;
I have updated
privileged and
confidential information, and the violation of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Sun, Jun 16, 2013 at 9:27 PM, jeremy youngs jcyoung...@gmail.com wrote:
checking it out now john
PRIVACY NOTICE
of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Sun, Jun 16, 2013 at 9:38 PM, andy pugh bodge...@gmail.com wrote:
On 16 June 2013 21:18, John Alexander Stewart ivatt...@gmail.com wrote:
Thanks for any words of wisdom anyone
, agent , student or any personnel
under your direction or control.
The contents of this profile are private and legally privileged and
confidential information, and the violation of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Sun
RESERVED WITHOUT PREJUDICES
jeremy youngs
On Mon, Jun 17, 2013 at 8:29 AM, John Alexander Stewart
ivatt...@gmail.comwrote:
Ok -
1) Ill get the dxf used off of the computer today, just in case it's
different with the one I have here with me. I'll put it up on the blog.
2) I'm going to re
, agent , student or any personnel
under your direction or control.
The contents of this profile are private and legally privileged and
confidential information, and the violation of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Sat
, student or any personnel
under your direction or control.
The contents of this profile are private and legally privileged and
confidential information, and the violation of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Thu, Aug 8
hello fellas, !!
been a bit but i came back from mo with some surplus center ballscrews i
had hangin around down there. i had to flip the ball nut 180 degrees to
make it work out right , my question is shouldnt the screw be completely
filled with balls? when i reassembled it neither race was
thank you , i will steel some from the spare screw lATER TODAY AND LET YOU
KNOW HOW IT WORKS , also installing home switches this might be getting
close to a real machine :)
jeremy youngs
On Sat, Aug 24, 2013 at 3:31 AM, Marius Liebenberg
mar...@mastercut.co.zawrote:
Jeremy
I my experience
or control.
The contents of this profile are private and legally privileged and
confidential information, and the violation of my personal privacy is
punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES
jeremy youngs
On Sun, Sep 22, 2013 at 7:19 AM, Marius Liebenberg
mar
and backlash prohibit this
jeremy youngs
On Sat, Oct 5, 2013 at 12:48 PM, andy pugh bodge...@gmail.com wrote:
On 5 October 2013 17:46, andy pugh bodge...@gmail.com wrote:
My Mill has an 80 speed gearboxes to give speeds from a slow 1000rpm
to a _really_ slow 45rpm.
Err _8_ speed gearbox
On Sun, Jul 15, 2012 at 11:47 PM,
emc-users-requ...@lists.sourceforge.netwrote:
Send Emc-users mailing list submissions to
emc-users@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/emc-users
or, via
N232 M01
N234 T5 M6
N236 G0 G90 G54 X.7213 Y-1.068 S5704 M3
N238 G43 H5 Z.25
N240 Z.1
N242 G1 Z-.0167 F6.16
tool #5 not in tool library error ???/ I put this tool in the library ,
tried g10l1 and it tells me the same every time. it will not mdi a t5m6 for
the same reason? im at a loss and any
1 - 100 of 495 matches
Mail list logo
