On Monday 17 October 2016 23:38:45 Todd Zuercher wrote:
> Probably a good quality nlgi 1 lithium based grease.
>
I have some sort of a mini gun with a cartridge of that loaded already.
So all I need to do is find a skinny gun connector. :)
Thanks Todd.
Cheers, Gene Heskett
--
"There are four
Probably a good quality nlgi 1 lithium based grease.
- Original Message -
From: "Gene Heskett"
To: emc-users@lists.sourceforge.net
Sent: Monday, October 17, 2016 10:39:46 PM
Subject: Re: [Emc-users] 2505 ball nut mount footprints
On Monday 17 October 2016 08:17:04 Gene Hes
On Monday 17 October 2016 08:17:04 Gene Heskett wrote:
> On Monday 17 October 2016 07:47:38 andy pugh wrote:
> > On 17 October 2016 at 12:36, Gene Heskett
wrote:
> > > Not a lot Roland, that several page long chart is for the nuts
> > > themselves. Nut mounts, other than what they should do well
On Monday 17 October 2016 07:47:38 andy pugh wrote:
> On 17 October 2016 at 12:36, Gene Heskett wrote:
> > Not a lot Roland, that several page long chart is for the nuts
> > themselves. Nut mounts, other than what they should do well in terms
> > of alignment with the nut to screw axis, aren't me
On 17 October 2016 at 12:36, Gene Heskett wrote:
> Not a lot Roland, that several page long chart is for the nuts
> themselves. Nut mounts, other than what they should do well in terms of
> alignment with the nut to screw axis, aren't mentioned anyplace in that
> nominally 206 page pdf.
Why would
On Monday 17 October 2016 01:51:32 Roland Jollivet wrote:
> On 17 October 2016 at 06:21, Gene Heskett wrote:
> > Greetings everybody;
> >
> > I just spent over an hour, trolling the net looking for a decent
> > copy of the footprint for one of those 2505 nut mounts, because I
> > need to carve up
On 17 October 2016 at 06:21, Gene Heskett wrote:
> Greetings everybody;
>
> I just spent over an hour, trolling the net looking for a decent copy of
> the footprint for one of those 2505 nut mounts, because I need to carve
> up a spacer pad to put under it, 16.5 mm's thick.
>
> I measured the len
Greetings everybody;
I just spent over an hour, trolling the net looking for a decent copy of
the footprint for one of those 2505 nut mounts, because I need to carve
up a spacer pad to put under it, 16.5 mm's thick.
I measured the length and width of the one I bought as being 35mm wide
and 60m