-users] touch screen calibration assistance please
On 5 May 2017 at 12:30, giorgio foga <giorgiof...@hotmail.it> wrote:
> Not worry, as I can understand today if I wanted to redistribute my work on
> Lcnc I have to use either linux or debian linux ... so I could run with
> egalax an
Gentlemen,
I am running Wheezy with an ELO touchscreen, The software installation
recognized the touchscreen and loaded the ELO calibration app. I ran that
(touching the screen in several places) and the app gave me numbers to put
in a configuration file and the address of the configuration
On 5 May 2017 at 12:30, giorgio foga wrote:
> Not worry, as I can understand today if I wanted to redistribute my work on
> Lcnc I have to use either linux or debian linux ... so I could run with
> egalax and debian ... but if i use debian I do not get very excited ...
ork on MS I'm not able to help
>
>
> regards
>
> giorgio
>
>
>
> Da: Jan Bos <rappyrip...@gmail.com>
> Inviato: mercoledì 3 maggio 2017 06.06
> A: Enhanced Machine Controller (EMC)
> Oggetto: Re: [Emc-users] touch screen calibr
able to help
>
>
> regards
>
> giorgio
>
>
>
> Da: Jan Bos <rappyrip...@gmail.com>
> Inviato: mercoledì 3 maggio 2017 06.06
> A: Enhanced Machine Controller (EMC)
> Oggetto: Re: [Emc-users] touch screen calibration assistance please
>
&
I you work on MS I'm not able to help
regards
giorgio
Da: Jan Bos <rappyrip...@gmail.com>
Inviato: mercoledì 3 maggio 2017 06.06
A: Enhanced Machine Controller (EMC)
Oggetto: Re: [Emc-users] touch screen calibration assistance please
Thanks
Are there any switches on or in the screen or commands that can be sent to it
to swap or invert axes?
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
Thanks everybody for hanging in there with me trying to figure this thing
out.
I ended up with calibration values as follows:
Option "Calibration""2025 27 125 1950" in the 99-calibration.conf
This gets my touch point within 1mm of where I actually touch the screen
with a stylus. I also
Get some sleep. You will think better in the morning. I calibrated mine but
don't remember how. I will check in the morning.
Regarding the two touch screens is it possible you have a multi-touch
screen?
On May 2, 2017 3:30 PM, "John Thornton" wrote:
And I know the same thing,
And I know the same thing, I made a script to load the file after testing...
JT
On 5/2/2017 1:39 PM, andy pugh wrote:
> It is possible to calibrate the screen iteratively by changing the
> numbers by hand. Don't ask me how I know.
Hello Andy,
Yep, got the desktop back. Turned out I typed in what you listed "SwapAxis"
"1" was the problem. I went back in and Nano'd this line out and the
desktop came back with of course incorrect calibration. I have the file
where you say yours is and if I make changes to the numbers, I can
rge.net>
Sent: Tuesday, May 2, 2017 3:40:52 PM
Subject: Re: [Emc-users] touch screen calibration assistance please
OK, now I am in trouble I guess. I made the folder in the /etc/X11 folder
and copied my calibration files in there. Reboot and nothing has changed.
Then I made a new folder where
On 2 May 2017 at 20:40, Jan Bos wrote:
> Now I did what and how to get my beloved desktop back?
does "startx" work?
I guess you need to undo the changes you made. If you have a
command-line then you should be able to delete the new directory.
On my Wheezy system the
OK, now I am in trouble I guess. I made the folder in the /etc/X11 folder
and copied my calibration files in there. Reboot and nothing has changed.
Then I made a new folder where the instructions told me to make it
(etc/X11/) but in /usr/share/x11) and put my configuration file in there.
Reboot
Hello Andy,
Thanks for your quick reply!
OK, I got it installed finally and I can go through the calibration for the
screen. For some reasons I have 2 eGalaxy Inc. Touch devices listed
according my Xinput output, device 11 and device 12.
When I go through the calibration, click the 4 corners the
On 2 May 2017 at 18:36, Jan Bos wrote:
> I tried to install 'xinput-calibrator' to calibrate the touchscreen but
> when I enter in my terminal window:
>
> 'sudo apt-get install xinput-calibrator' I get the following feedback:
I have it on my Wheezy machine, but even after
16 matches
Mail list logo