Sent: Wednesday, July 12, 2017 2:28 PM
To: ROBERT
Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to acrisp ?
ROBERT wrote:
> Lee, you are correct. I agree; however, I would never use a relay on an EVSE.
> But that just me. I have a motor control (with correct size heater)
ROBERT via EV wrote:
I ask again. Is it a relay or a contactor? And before you answer, remember
that a relay is tested to a different set of requirements than a contactor.
The problem with a solid state relay is not the failure mode but the fact
that a solid state device always has some level
Vehicle Discussion List
Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to acrisp ?
Robert,
full galvanic isolation requires a mechanical relay in the EVSE,
as the failure mode of a "solid state relay" (fancy words for
essentially a transistor) is to fail "ON"
: Electric Vehicle Discussion List
Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to acrisp ?
I looked at the pictures and wondered the same - if the yellow cord was
the connection
between car and EVSE then the only way the EVSE coud set the car on fire
would be burning bits t
ect power in failure situations.
Cor.
From: ROBERT [mailto:bhensle...@msn.com]
Sent: Tuesday, July 11, 2017 4:09 PM
To: Cor van de Water; Electric Vehicle Discussion List
Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to
acrisp ?
Cor van de Water wrote: " Remember
unted on a wall would burn with enough intensity to set a
>> vehicle on fire.
>> David Kerzel
>>
>> -Original Message-
>> From: EV [mailto:ev-boun...@lists.evdl.org] On Behalf Of Cor van de Water
>> via EV
>> Sent: Monday, July 10, 2017 7:44 PM
&
Vehicle Discussion List
Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to
acrisp ?
Cor van de Water wrote:
> Remember that an EVSE has a relay interrupting the 240V supply.
> As I related before, any wire that is damaged or improperly tightened
> can burn, ev
Cor van de Water wrote:
> Remember that an EVSE has a relay interrupting the 240V supply.
> As I related before, any wire that is damaged or improperly tightened
> can burn, even if not overloaded for the spec of the wire.
> If the EVSE is not frequently used, there is the risk of corrosion of
> t
Message-
From: David Kerzel [mailto:a...@bellsouth.net]
Sent: Tuesday, July 11, 2017 3:03 PM
To: Cor van de Water; 'Electric Vehicle Discussion List'
Subject: RE: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to
acrisp ?
In your example the EVSE is set for 40 amps providi
> via EV
> Sent: Monday, July 10, 2017 7:44 PM
> To: Electric Vehicle Discussion List
> Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to
> acrisp ?
>
> Not true, the EVSE is supposed to limit the charging current to what is safe
> to draw from the electr
: 'brucedp5'; 'Electric Vehicle Discussion List'
Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to
acrisp ?
What does the EVSE have to do with this? The car makes the decisions.
The EVSE is just a super safe power cord.
David Kerzel
-Original Message-
From
:36 PM
To: 'brucedp5'; 'Electric Vehicle Discussion List'
Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to
acrisp ?
What does the EVSE have to do with this? The car makes the decisions.
The EVSE is just a super safe power cord.
David Kerzel
-Original M
un...@lists.evdl.org] On Behalf Of David Kerzel
> via EV
> Sent: Monday, July 10, 2017 12:36 PM
> To: 'brucedp5'; 'Electric Vehicle Discussion List'
> Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to
> acrisp ?
>
> What does the EV
Discussion List'
Subject: Re: [EVDL] ? Is this really a Smart Fortwo ED EV that burnt to
acrisp ?
What does the EVSE have to do with this? The car makes the decisions.
The EVSE is just a super safe power cord.
David Kerzel
-Original Message-
From: EV [mailto:ev-boun...@lists.evdl.org] On Be
14 matches
Mail list logo