I have been following this list for a couple of months now, all of my
operational problems have been answered with out me having to send a single
email. My question has any one been successful in running "anyj" on a
Mandrake 6.1 box. I have it installed but have been unable to get it to run
Greeting from Peru.
Perhaps my problem isn't a big deal, but I couldn't get the solution in the
newbie list.
I work with a Pentium III that has all the peripherals integrated in the
mainboard, but I can't configure either the modem or the sound system.
The modem is a PCTel HSP56 , I found the
On Sat, 27 Nov 1999, Thomas J. Hamman wrote:
On Sat, 27 Nov 1999, Civileme wrote:
Fabien Deschodt wrote:
That way, you can be using the Qt 1.4 libs for KDE at the same time you
are using the 2.0.2 libs for licq or whatever.
Well, I just did : rpm -i qt2... to have both of
Hello All...
I'm curious too know, if some could give me an idea of what would be the
minimum install to get a basic system up and running..
What i'm after is too do a system from the ground up installing just the
progs that i want on the system, recompiling them as i install them
HSP = host signal processing. This is not a hardware modem.
http://www.portable-design.com/editorial/1998/08/898prods2
-Original Message-
From: Miranda Heinz-AHM008 [EMAIL PROTECTED]
To: '[EMAIL PROTECTED]' [EMAIL PROTECTED]
Date: Sunday, November 28, 1999 10:55 AM
Subject: [expert]
David wrote:
Hello All...
I'm curious too know, if some could give me an idea of what would be the
minimum install to get a basic system up and running..
What i'm after is too do a system from the ground up installing just the
progs that i want on the system, recompiling them as i
Dear friends:
1) Can't SAVE:
I can't figure this out: I can't save any new documents:
When I open a new window in StarWriter and type in text and try to save
it I get the following error message:
"Error while saving document Untitled 1:
Object not accessible
The object cannot be accessed
due
On Sun, 28 Nov 1999, Steve Philp wrote:
Here's a nasty little secret I've never seen documented anywhere. To
get the absolute smallest installation, just unselect ALL of the group
choices (like GNOME Desktop, KDE Desktop, Network Management, Kernel
Development, etc) during installation.
On Sun, 28 Nov 1999, Benjamin Sher wrote:
Dear friends:
1) Can't SAVE:
I can't figure this out: I can't save any new documents:
When I open a new window in StarWriter and type in text and try to save
it I get the following error message:
"Error while saving document Untitled 1:
I've compiled a new kernel as I've done many times in the past. This time I'm
trying to use linuxconf to automatically configure lilo for me. Linuxconf
doesn't provide me with a list of choices concerning which the root partition
to install to and if I type in '/dev/hda1' (what I am using now)
:Hello All...
:
:I'm curious too know, if some could give me an idea of what would be the
:minimum install to get a basic system up and running..
? Depends on what you call "basic". There are "mini" and "micro" linux
distributions out there which fit on two floppies or so... No X, no user
ACK, it's happening!
The PCTel HSP is a Host Signal Processing Modem, one of the first Winmodems to
become a linmodem
You NEED a DRIVER for Linux which PCTel does provide. GO to their Website or to
www.pcchips.com where your board was made. One of the two will have the driver.
Civileme
Dear Ramon and friends:
For the record, I uninstalled Sun's SO51a (and deleted the .sversionrc
in my home directory plus deleted the entire Office51 directory) and
installed the earlier StarDivision S051 version that came with my
Mandrake PowerPack. It's an rpm which installs as root into /opt
On Sun, 28 Nov 1999, Civileme wrote:
ACK, it's happening!
The PCTel HSP is a Host Signal Processing Modem, one of the first Winmodems to
become a linmodem
You NEED a DRIVER for Linux which PCTel does provide. GO to their Website or to
www.pcchips.com where your board was made. One of
Benjamin Sher wrote:
Dear Ramon and friends:
For the record, I uninstalled Sun's SO51a (and deleted the .sversionrc
in my home directory plus deleted the entire Office51 directory) and
installed the earlier StarDivision S051 version that came with my
Mandrake PowerPack. It's an rpm which
On Sun, 28 Nov 1999, Steve Philp wrote:
David wrote:
haha.
You know Steve, I just finished downloading cooker, and was just thinking of
that question, and was thinking
of that same thing!, i just was not sure if u would have to go into the
"select individual packages " or
- Original Message -
From: Denis Havlik [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, November 28, 1999 5:49 PM
Subject: Re: [expert] Basic Install
:Hello All...
:
:I'm curious too know, if some could give me an idea of what would be the
:minimum install to get a basic
On Mon, 29 Nov 1999, Sher wrote:
Well, it didn't do the trick. Tried to save a new
document and got the same error message about permissions. So far, no
luck.
Ideas:
1. StarOffice just will not navigate past any mount points it encounters.
[that alone is enough to get it my royal trash
Ron Stodden wrote:
On Mon, 29 Nov 1999, Sher wrote:
Well, it didn't do the trick. Tried to save a new
document and got the same error message about permissions. So far, no
luck.
Ideas:
1. StarOffice just will not navigate past any mount points it encounters.
[that alone is enough
On Sun, 28 Nov 1999, Steve Philp wrote:
[..]
Here's a nasty little secret I've never seen documented anywhere. To
get the absolute smallest installation, just unselect ALL of the group
choices (like GNOME Desktop, KDE Desktop, Network Management, Kernel
Development, etc) during installation.
Is anyone aware of any problesm with the automounter?
Recently a problem with automounter has cropped up. Whenever I try to
mount a drive directory operations slow to a crawl. If I stop the
automounter (autofs stop) everything come back to normal. This does
not happen until the first attempt
Ramon Gandia wrote:
On Sun, 28 Nov 1999, Civileme wrote:
ACK, it's happening!
The PCTel HSP is a Host Signal Processing Modem, one of the first Winmodems to
become a linmodem
You NEED a DRIVER for Linux which PCTel does provide. GO to their Website or to
www.pcchips.com where
Hi,
I seem to have a problem during the install of Mandrake-6.1 that
freezes my whole system (only power-off helps!). This happens during
or after detection of my ps2-mouse. I've tried to disable the ps2
mouse in my bios, with no difference and I've also tried using the
expert mode, so that I
Hi,
to install Linux Mandrake 6.1 on my machine I downloaded the iso-image
from a mirror on my Windows-partition. I do not have a CD-R however,
so I'd like to be able to mount this image using -o loop (in expert mode, if
necessary) and proceed with the installation from here. Is this
possible
On Mon, 29 Nov 1999, Bill Virginia Hodges wrote:
I do not understand this.
My StarOffice 5.1 on Mandrake 6.1 allows me to use it up arrow
navigation aid to go to any one of the directory entries
that I get when I issue a mount command.
There must be something wrong with your installation.
On Mon, 29 Nov 1999, Ronald Pijnacker wrote:
Hi,
to install Linux Mandrake 6.1 on my machine I downloaded the iso-image
from a mirror on my Windows-partition. I do not have a CD-R however,
so I'd like to be able to mount this image using -o loop (in expert mode, if
necessary) and proceed
26 matches
Mail list logo
