to see the radio.
There are plenty tutorials on the Flex Community page to configure your digital
software to communicate to the radio using CAT for control and DAX for audio.
73
Dave wo2x
Sent from my waxed string and tin cans.
> On Mar 1, 2017, at 9:33 AM, Mardy Eedson <mardy.eed...@gma
Skype has worked great for me for 3 1/2 years. First used it with VAC with
5000A, and now DAX with 6700.
Dave W7IWW
> On Apr 1, 2016, at 8:41 PM, Mike va3mw <va...@portcredit.net> wrote:
>
> I used Skype for years on my remote base and it was great if you take 10
> minutes
Actually Steve is very active in the DDUtil yahoo group
Dave wo2x
Sent from my waxed string and tin cans.
> On Mar 28, 2016, at 8:56 PM, <n...@hotmail.com> <n...@hotmail.com> wrote:
>
>
>
> No, haven't emailed Steve. Didn't see an email to use. Didn't know h
products unless
we are CERTAIN of the authenticity and accuracy of description.
See, for instance, melanin in infant formula to fool protein tests and
flooring certified formalin-free and found to contain by 60 Minutes.
At this point the Chinese are not straight players on international markets.
--
Dave
The easiest thing to do is use DHCP reservation in your router. This way when
you boot the radio the router will see the MAC address of the radio and assign
it the same IP all the time.
Look in the manual for your router for instructions.
Dave wo2x
Sent from my waxed string and tin cans
I transmit, the Fwd Pwr shows 0 watts
out. As I recall the fix was to restore an older database, so I did
that, but no cigar.
What is the received wisdom as to how to handle this situation?
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http
?
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html
-
___
FlexRadio Systems Mailing List
FlexRadio@flex
erm sustainable, you'll need to organize and recruit
accordingly.
My SDR-1500 is mothballed, I'm now a 6500 user, and my open source management
cycles are already consumed by LoTW/TQSL. Advice will be the limit of my
contribution to this effort.
73,
I
Sent from my iPad
> On Jan 2, 2016, at 1:00 PM, flexradio-requ...@flex-radio.biz wrote:
>
> Send FlexRadio mailing list submissions to
>flexradio@flex-radio.biz
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
Running PSDR (latest) with a F3K, had to do a database reset to
bypass some bug and now the Panafall has a panadapter, but black
waterfall. I tried adjusting the values in Setup, but no cigar.
Turned out rebooting fixed it. Thanks to the list members who helped.
--
Dave Gomberg, San
Running PSDR (latest) with a F3K, had to do a database reset to
bypass some bug and now the Panafall has a panadapter, but black
waterfall. I tried adjusting the values in Setup, but no
cigar. Suggestions???
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses
You can find them on e-bay. Just search for Hercules DJ controller on e-bay.
Hope this helps.
Dave Wilson
N5DBS
flexradio-requ...@flex-radio.biz wrote:
> Send FlexRadio mailing list submissions to
> flexradio@flex-radio.biz
>
> To subscribe or unsubscribe via the Wo
.
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html
-
___
FlexRadio Systems Mailing List
FlexRadio@flex
I’m asking $1500.00 OBO. If you are interested, please contact me by email at
wd8...@arrl.net. I will accept PayPal or money order.
73,
-Dave
WD8KRV
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http
But in balanced configuration it can cause higher DPCs.
At least try it to see if it eliminates or reduces the stuttering.
Dave wo2x
Sent from my waxed string and tin cans.
On Jul 22, 2015, at 11:16 AM, Neal Campbell nealk...@gmail.com wrote:
I would not set the laptop's power plan
Another thing to check is power plan on the PC. Balanced is the default. It is
recommended to change it to high performance.
Dave wo2x
Sent from my waxed string and tin cans.
On Jul 22, 2015, at 10:00 AM, W5IO w...@sbcglobal.net wrote:
Be sure bios is set up correctly. Mine
Should be the Heil CC-1-Y cable.
4 pin XLR to 8 pin Yaesu.
Dave wo2x
On 6/14/2015 1:30 PM, David Fisher wrote:
I have just purchased a 6300 which made my HM Heil Pro obsolete because of
the cord connections . can anyone recommend where I can get a new cord that
is compatible
From Heil or a Heil dealer. The wiring is standard 8 pin Yaesu.
Dave wo2x
On 6/13/2015 9:38 PM, Don Plunkett wrote:
I have just purchased a 6300 which made my HM Heil Pro obsolete because of
the cord connections . can anyone recommend where I can get a new cord that
is compatible
B+
Dave
wo2x
On 6/3/2015 5:28 PM, Bill and Sue wrote:
A test to check the e mail list
thanks
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
Sent from my tin can waxed string!
On Apr 28, 2015, at 9:04 PM, Bill and Sue ope...@rcn.com wrote:
VK3
What! you do not have the balls to sign your note. If you do not like
a post then delete it.
You are a rude idiot.
Bill N1EHM
Agree, Bose Companion II speakers work well -- excellent audio. I have no
RF issues. Also available via Amazon. Proper station grounding is
essential to minimize rf issues.
73, Dave,
W7IWW
On Wed, Apr 15, 2015 at 9:46 AM, David P Mitchell n5...@arrl.net wrote:
The monitor speakers from Bose
Bill,
In case you are not aware, the 6300 would need a transverter to operate on 2
meters.
Dave
wo2x
Sent from my tin can waxed string!
On Apr 7, 2015, at 4:49 PM, Bill and Sue ope...@rcn.com wrote:
Anyone know where I can go on u tube or elsewhere to see and hear a demo of
the flex
a snap-on ferrite of type 31 material (large size) and
killed reflected power completely. Cost about $15.
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html
.
Reason for sale: Flex 6700 now in operation.
All interested, please contact via email and we can discuss further details.
Thank you!
Dave Movius W7IWW
dave.mov...@gmail.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out
to a 6xxx series FLEX.
Thank you.
Dave Wilson
N5DBS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
I have a Icom IC-8000H Dstar dual band that I would sell so I could get a
newer model N5DA. hit me off list if interested N5DA Otherwise FlexRadio
would work great on 2 meters on all modes depending on the model with a
transverter.
On Thursday, January 15, 2015 12:00 PM,
Computer, properties, device
manager) and under Universal Serial Bus controllers, right click each
hub and go to properties. Under Power Management tab deselect Allow the
computer to turn off this device to save power.
That should fix it.
Dave
wo2x
On 1/4/2015 11:13 AM, w...@reagan.com wrote
My recent help ticket was acknowledged nearly within minutes after the open of
normal business hours this last Monday.
On Nov 5, 2014, at 1:29 PM, Tim Ellison, W4TME t...@flex-radio.com wrote:
Bill,
We try to acknowledge all newly entered HelpDesk tickets withing 4 business
hours of
no tuner or second receiver, but expandable to include those if desired.
N5DA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Why is it a catch 22? There should be a physical label on the radio with the
serial number.
Dave
wo2x
Sent from my iPhone
This is what's known as Catch-22!
Tony KT0NY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi Keith
Why are you running both SDUtil and Mini Deluxe? DDUtil has HRD server built
in.
Dave
wo2x
Sent from my iPhone
On Oct 24, 2014, at 6:26 AM, Keith Morrison kmorrison2...@sky.com wrote:
Hi all running the following set up Flex 1500, Vac 4.9, VSP manager,
DDUTL Version 3
No. You do not need Internet connectivity at all.
Dave
wo2x
Sent from my iPhone
On Oct 21, 2014, at 1:10 PM, Alfred Watson via FlexRadio
flexradio@flex-radio.biz wrote:
Just saying, If I bought a Flex 6700 would my computer have to be tied to the
Internet all the time or not.
I'd
At 08:22 10/19/2014, Robert McGwier wrote:
The Flex 6300 is not as rugged a receiver as the 6500 and 6700.
Anyone know where on the flex site details of this kind of info is available?
I went looking for it but came up empty-handed.
--
Dave Gomberg, San Francisco NE5EE Programming
There was someone on the list selling a headset based on the OVL750MV
and configured for a Flex 3000. Does anyone have the name and email
address of this guy???
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham
Selling my m-Audio Studiophile AV40 speakers. These are the original model with
the bass boost switch.
They are excellent condition and do not pick up RFI.
$80 plus actual shipping from zip 07440.
Dave, wo2x
Sent from my iPad
On Sep 27, 2014, at 9:41 PM, Dan Mees via FlexRadio
flexradio
Anyone know what typical time is to get a response after shipping an item back
for repair. Even a confirmation of receiving the item?
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
is fine.
Any idea what might have gone wrong?
I am guessing bug in PSDR or firewire driver or Windows, but what do I know?
Rebooting windows (step B) didn't seem to fix it.
Possible firewire port bug?
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc
professionally-written program does.
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html
-
___
FlexRadio
According to the roadmap, a couple of months. Give or take.
Remote over LAN is scheduled for next release which is going to allow for
native transport of tx/rx audio over IP.
Remote over WAN should be in version 2.x
Dave
wo2x
Sent from my iPad
On Sep 13, 2014, at 2:22 AM, Gary Smith g
and reload fldigi in a week so,
once I have a reliability base line set, to see if something happened there.
Thanks in advance, and oh, by the way,
my CPU % dropped from almost 30% with the old box - to never more than 5% with
the Win7 box
dave dabay
kd...@twlakes.net
to several groups that support
email reflectors and find
them very useful and EASY to use. They make quick work of keeping up with
current happenings.
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html
Tim
I have not gotten a digest from the mail list in several days and noticed that
the archive stops at Aug 14th…has something changed or is there a problem with
it?
I tried to resubscribe, but it said I was already subscribed.
thanks
dave
dave dabay
kd...@twlakes.net
Or there hasn't been any postings :-)
Dave
wo2x
Sent from my iPhone
On Aug 29, 2014, at 7:48 AM, dave dabay kd...@twlakes.net wrote:
Tim
I have not gotten a digest from the mail list in several days and noticed
that the archive stops at Aug 14th…has something changed
I have ordered a new pc to use with my Flex 1500 and would like to pave
the way to a rock solid box like XP was.
Process to upgrade and move my 1500? VAC? Fldigi? VSPE?
Pitfalls or things to check on the Win7 Pro 64Bit?
thanks in advance
dave dabay
kd...@twlakes.net
Standard 5000a available. 2nd RX and ATU can be field or factory added if
desired. 5000a will work splits on same band without 2nd Rx Works great. Will
include working firewire card for computer and software with manual. I changed
to Flex 6300, however the 5000a still out performs the 6300
Q5 here. W7IWW
On Aug 5, 2014, at 5:25 AM, Maury Guzick w...@sbcglobal.net wrote:
Wondering if I am off the reflector as have not received a post since 8/1?
W5IO
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the
At 11:24 7/23/2014, Glenn wrote:
Hi Dave,What mic are you using
Yamaha CM-500 boom mike
and which mic input do you use ?
Thru electret power supply and into the front panel RJ-45 jack.
Note that this setup has worked fine for several years.
Ooops, you led me to check the mic
ferrites. Could the garbling be happening
inside the PC instead of inside the F3K???
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html
At 09:35 7/20/2014, Paul Delaney - K6HR wrote:
Hi Dave,
Any chance you're using a HEIL mic adapter?
No, and there was no problem until yesterday morning. Didn't change
anything in the mic/headset configuration.
Thanks for the idea tho.
I had garbled audio from RF getting into the mic
bugs like that. Especially when
they are hard to provoke and have awful consequences.
if this is the case,put ferrite cores on all cables...both ends
. Make sure you have a good ground.
- Original Message -
Subject: [Flexradio] Garbled output
From: Dave Gomberg da...@sfwcf.com
, but I re seated them, no help. And I did a cold boot
of the PC. Also no help.
Any suggestions? What next??
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html
sure you have a good ground.
- Original Message -
Subject: [Flexradio] Garbled output
From: Dave Gomberg da...@sfwcf.com
Date: 7/19/14 5:00 pm
To: flexradio@flex-radio.biz
Running F3K with 2.7.2 PSDR, haven't intentionally changed anything.
This AM receive was fine, but XMIT
Basic Flex 5000a for sale. used little, operating at mfg specs. Can ship in
original FLEX packing and even add a working firewire card for computer. $1600
includes shipping continental USA. N5DA or email d...@cawb.com or text
214-674-0153.
___
will then be spot on.
73,
Dave Wilson
N5dbs
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
are for those terrified by computers. They hide the terrifying
stuff quite well.
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.wcf.com/ham/info.html
and are very reliable.
73, Dave W7IWW
PS: enjoy your new 6700. It's awesome!
On Jun 9, 2014, at 3:44 PM, TM tm.st...@verizon.net wrote:
I have been using a pretty old Astron 20A supply for my Flex 3000. Has not
been an issue as I normally run pretty low power - 10W most of the time
unless I need
. Suggest you click the
Support link and take a look for Flex New User Orientation/Configuration.
Neal provides good value and he will have you up and running quickly.
Welcome the the world of fun with SDR.
http://www.abrohamnealsoftware.com
73, Dave W7IWW
On May 29, 2014, at 3:58 PM, Lester
N5DA selling Flex 5000A - 2 years old used very little in original box with
enclosures. expansion for 2nd rcvr and ATU but not included. Bonus: firewire
card which works with xp, 7, 8.1. SDR is the future of Ham Radio. $1600 plus
shipping. phone or text Dave, N5DA @ 214-674-0153
This looks like what folks are looking for: (SmartSDR Software Upgrades and
Licensing) -- straight from the horses mouth !!
http://www.flexradio.com/amateur-products/flex-6000-signature-series/smartsdr/
On May 13, 2014, at 8:12 AM, ross.stenb...@charter.net wrote:
Look for upgrades
Everything working in perfect order, non-smoked. Asking $1750 with Firewire
card, plus shipping in original packing material.
N5DA , Best way to contact via email. pease75...@yahoo.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To
Order or
Paypal. No holds please. Email me direct if interested, davef...@gmail.com
73
Dave W5SWL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.wcf.com/ham/info.html
something to screw something up? Help
desperately sought. Thanks. Dave NE5EE
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.wcf.com/ham/info.html
to screw something up? Help
desperately sought. Thanks. Dave NE5EE
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.wcf.com/ham/info.html
December and blue screen free
since last October, knock on wood.
Sadly, I am going to have to face the music and build a Win7 machine, since
support for XP and likely SDR on XP will soon be going away.
best of luck, but my bet is on something annoying Windows/CPU
dave dabay
kd...@twlakes.net
Bill,
Glad for your success! Have fun. Neal came to my aid in time of need. He's a
valuable and knowledgable resource we can all appreciate time and again.
Dave W7IWW
On Mar 12, 2014, at 11:28 AM, William and Susan ope...@rcn.com wrote:
Wow, what a life changing experience I had last
buddy. I would say that his capabilities and mindset will be key to
whether or not he will be able to operate the 3000 with this device.
Good luck and bless you for helping.
Dave, K4TO
On 3/7/2014 8:54 AM, William and Susan wrote:
I just had a fascinating thought about Flex Radio, Your input
on the desired
transmit freq….
and operate..
is that correct? is there a better way?
thanks in advance
dave dabay
kd...@twlakes.net
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
Check the Drive slider control setting. Default value is 50% which yields about
48 watts. Increase it to 100 % for full output.
Dave Wilson
N5DBS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
Yep, Grreg. We're all human. 6700 due here tomorrow!! Yea!!
Davve, W7IWW
On Feb 12, 2014, at 6:24 PM, Greg Jurrens g...@flex-radio.com wrote:
Ooops...
That's ok Nail, we all mess up on this channel!
Hi Bill and Welcome!
73,
Greg - K5GJ
FlexRadio Sales
Sent from Greg's
Or submit a Help Ticket to FlexRadio. That works well, and is sometimes faster
than calling!
On Feb 7, 2014, at 8:45 AM, Ken Akin kena...@gmail.com wrote:
Michael -
It will be faster to call Flex service. This list is not monitored by Flex
anymore. Tim (and others) drop by from time to
Whenever I have had a concern with my Flex 5000, I submitted a Help Ticket to
FRS and received very prompt and attentive service.
Dave W7IWW
On Feb 2, 2014, at 11:39 AM, Tom Warren mtn...@hartcom.net wrote:
Rick,
I read your posting with interest. I have almost the same situation
does
the PC hardware. No, I'm not trying to start a discussion about this
concept. I just want to know if I can run the radio with it.,
Thanks 73,
Dave, K4TO
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
Dave, I am no expert but I would just try it and see what happens. If it
does not work then buy a cheep PC and have fun.
The PC I used on my Flex 3000 I paid $50.00 at a hamfest, it's a used
Dell Optiplex GX620 with two gigs rams, works perfect. In fact every PC
I own I bought used
i've been gone all morning and when I returned there were several useful
suggestions. I will go check latency and report back. Many thanks,
Dave, K4TO
ps -- I do run boot camp.
On 1/31/2014 8:56 AM, Dave Sublette wrote:
Good morning,
I subscribed to this list because I am considering
Per Jim's request and help, I have run the latency test and my machine
runs at 250-300 us latency. Thanks Jim. Looks like I'm good to go.
73, Dave
On 1/31/2014 9:55 AM, Jim Jannuzzo wrote:
Dave,
Macs are often superb platforms for PowerSDR.
Two threshold requirements for a PC to run PowerSDR
back on, symptom continued. When I
ATU or Tune,
the SWR sweeps down the full range of the meter, then starts back
again at the high end.
Something is screwed up, but I have no idea what.
What should I do now?
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses
didn't fix
it. There may be a PSDR bug that timed sleep causes database
corruption. There sure are a ton of bugs in PSDR so it wouldn't shock me.
If it happens again I will reset the database. Should back it up
now while all is well.
--
Dave Gomberg, San Francisco NE5EE Programming
specifically for the FLEX
radios and it is only $59.99 if you do not already have one. I vote for the
FLEX mike.
Good luck with your mike quest.
Dave Wilson
N5DBS
flexradio-requ...@flex-radio.biz wrote:
Send FlexRadio mailing list submissions to
flexradio@flex-radio.biz
,
-Dave
WD8KRV
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com
Thanks, Ray. I clearly missed that somewhere down the line.
73,
Dave
WD8KRV
-Original Message-
From: Ray, K9DUR
Sent: Saturday, January 04, 2014 11:44 AM
To: 'Dave Burnett' ; 'FlexRadio'
Subject: RE: [Flexradio] Multiple PowerSDR Sessions
Dave,
That is not a problem
,
-Dave
WD8KRV
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com
in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2247 / Virus Database: 3658/6442 - Release Date: 12/22/13
--
73 Dave W9WRL
http://www.w9wrl.com/w9wrl
http://www.facebook.com/w9wrl
http://www.facebook.com/qchams
Twitter @w9wrl
___
FlexRadio
of station, and
numerous other details along the way. I am technology challenged but like to
jump in where angels fear to tread.
Neal has made the journey not only possible for me, but helped make it a joy.
For those SDR hams interested in some support, he provides great value.
Dave W7IWW
I currently enjoy Neal's periodic support utilizing one of his remote services
contracts. I've received excellent value. Plus, he is fun to work with.
Highly recommend!
73, Dave
W7IWW
On Nov 20, 2013, at 6:01 PM, Neal Campbell nealk...@gmail.com wrote:
I worked all day in refreshing
. Contact me off list at
wo2x AT arrl DOT net
Thanks
Dave
wo2x
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
Setting: F3K, Win XP SP3, PSDR 2.5.3
Symptom: 0Db power out on SSB xmit, rcv is fine, all bands
Database reset didn't help. Does anyone recognize these symptoms? Any fix?
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.wcf.com
At 20:06 10/19/2013, Mark Lunday wrote:
Yes, that would be helpful to have the model thanks Dave
OnStage Gear OSG KSP 20 Sustain Pedal
It's been working for about 5 years without a hitch.
Mark Lunday, WD4ELG
Greensboro, NC FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
From: flexra
Did you forget to add the link to the kit from eBay to your message below?
Dave (W4DJW)
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Rod
Lane
Sent: Tuesday, September 24, 2013 8:17 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Wireless
continues to be a mainline product (as
the 1500 and 3000 depend on it), so the 5000 has a definite sw
future. If it meets your needs and you can find a bargain from
someone going for a 6000 series I would say go for it. I would buy
one except I am so happy with my 3K.
--
Dave Gomberg, San
Dave,
I have a 5000 and love it. As for continuing support, there is NO question
that FlexRadio continues to support this model. I just had an in-warrantee
service completed in very short turnaround time. PwrSDR is supported as
evidenced by the most recent software update -- after
AA6YQ comments below
-Original Message-
From: dx...@yahoogroups.com [mailto:dx...@yahoogroups.com] On Behalf Of Michael
L. Therrien, MD
Sent: Thursday, July 04, 2013 9:49 PM
To: dx...@yahoogroups.com
Subject: RE: [dxlab] Moving DxLab from Win XP machine to Win 7 64 bit machine
Dave
Bernd
You may also want to connect an RS 232C cable from KPA500 RS232(PC) to a
serial port on your computer.
You can use the Utility program or DDUtil to control most features of the
KPA500.
DDUtil can be set up to control the power out of the Flex 5000 to avoid an
overdrive fault.
73's Dave
is useless below 600kHz.
73
Nige.
On 25/06/2013 06:34, Dave Blaschke, w5un wrote:
Tonight I decided to tune the broadcast band with my flex 5K and
PDSR v2.6.4. Oops, I couldn't. As soon as I go lower than 1800 khz,
I get the message out of band and the noise floor drops way down
with no sign of any
Tonight I decided to tune the broadcast band with my flex 5K and PDSR
v2.6.4. Oops, I couldn't. As soon as I go lower than 1800 khz, I get
the message out of band and the noise floor drops way down with no
sign of any signals.
Is there some setting I'm missing?
Dave, W5UN
Highly recommend Neal's services.
Dave W7IWW
On Jun 22, 2013, at 9:10 AM, Neal Campbell nealk...@gmail.com wrote:
Hi All,
With the rollout of the new Signature line of Flex radios (the 6000
series), many Flex'ers are selling their radios to make room in the shack
for the new arrival
Thanks to all of you who responded with help and suggestions. The
problem has been solved; I replaced MixW with FLdigi, hi. that did the trick!
Dave W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
maybe
then be accessed without having to incorporate a huge body of information into
one document. It might be something that could be easily updated as new
information becomes available?
Just a thought. The effort being considered is timely.
Dave W7IWW
On May 29, 2013, at 10:18 AM, Patrick
of tuning. What I do not understand is how the F5K immediately
switches from AUTO to Bypass. Has anyone seen this before?
Best Regards
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
a cache of appropriate spare parts. There are plenty of hams
maintaining DOS machines to run a favorite DOS-only
application, e.g. K6STI's RITTY. Twenty years from now, there will be plenty of
PCs running Windows XP and Windows 7.
73,
Dave, AA6YQ
-Original Message
1 - 100 of 852 matches
Mail list logo
