are there release notes for firmware 1.3.0.6? I am curious to know what is
addressed.
I loaded it in and all seems well.
73
Dave
wo2x
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
There are release notes with every firmware version. If using the
auto-installer version from the web site, look in the c:\Program
Files\FlexRadio Systems\Firmware\radio_type\firmware_version folder
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
Attachments are not allowed on reflector posts, so I can't see the error. Is
UAC turned off?
You may have to right click on it and do a run as administrator.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Earl
The off-line store is now an On-Line Store once again. Again, we
apologize for the inconvenience. Thanks for you late night work on
this, Dale!
-Tim
---
W4TME
FlexRadio Systems - Info Management Admin.
Tune in Excitement
On 7/9/2009 11:29 PM, Tim (W4TME) wrote:
To all,
Due to unforeseen
Thanks Tim,
DIdn't think to check there :-)
Oh well, I have to stop playing with my Flex and get to work.
73
Dave
wo2x
--
From: Tim Ellison telli...@itsco.com
Sent: Friday, July 10, 2009 7:48 AM
To: Dave rocke...@gmail.com; Flex-Radio E-Mail
Versions:
PowerSDR V1.18.1
Flex 5000 (1.3.0.6)
Vista X64 Service Pack 1
.NET 3.5 SP1
I often leave PowerSDR running for extended periods of time in
monitoring mode (WSPR for example) - after 8-10 hours I get the
following
Hi guys, I have seen this a few times...normally the screen is just froze
when I come back, and on / off with the start stop button fixes it.
However, on a few occasions, I have the red X. That requires a restart of
the software from the icon. This is with V1.18.1 and VISTA 32 Bit, firmware
Yesterday there was an E-skip opening on 6M around 20:30Z. I noticed a lot of
activity on the map at
http://www.solarcycle24.com/ . Well I tuned to 50.080 and started answering
CQ's. It was very cool
to watch signals appear and disappear suddenly on Skimmer. Have read about how
signals will
Go on Craigs list and look for stereo receivers that have multiple inputs. You
want this so that you can
run line level in from your Flex rig. Frequently you can find a deal with
speakers like this one for instance
for $60.00 http://detroit.craigslist.org/ele/1262606694.html A lot of people
I think the Sounds Sweet speaker is actually just a subwoofer from a
non-amped set of computer speakers (and it is way too big for
sitting on a desk). I have the Bose computer speakers and they work
really well, no RFI, etc. You also might consider the set of Boston
Acoustic speakers that
Dear FlexRadio Systems Reflector subscribers,
Starting today, July 10, 2009, we begin the transition from a single
Reflector to two reflectors as previously discussed in this venue. We have
decided to implement a two reflector system where discussion related to
experimentation with alpha or
One of the required support files was inadvertently omitted from the
installer package for SDRDataTransfer v2.0.6. If the missing file was
placed on your PC by another program you previously installed, this may or
may not be an issue. Otherwise, you will get an error message which
includes the
Has anyone been able to get this to work?
73,
Jim / K4ECP
- Original Message -
From: Ray Andrews, K9DUR k9...@rnacs.com
To: Flex-Radio E-Mail Reflector flexradio@flex-radio.biz
Sent: Friday, July 10, 2009 3:24 PM
Subject: [Flexradio] SDRDataTransfer Installation Package Error
One of
Purchased an Advanced Receiver Research model P50VDG preamp for my Flex
5000A and just installed it today. Using two 3' RG59 75 ohm patch cables
to connect the preamp in the RX1 loop. I read the KB article on the
antenna setup for using the RX1 loop and have that setup per the
instructions,
Everything appears to be good except you do not need the AGC-T set that high
with the extra gain provided by the preamp. Set the AGC-T as per this KB
article.
http://kc.flex-radio.com/KnowledgebaseArticle50153.aspx
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
Ok Neal ... I am going to take your advice on this one. I have been looking
for new speakers for the flex ... not happy with the Logitech 2.1 system I
have. I found these same BA MM220 speakers in Canada at Tiger Direct for
CAD$35 ... we can almost never get similar deals in Canada as in the USA.
I went on AMAZON and got a great little 40 watt stereo amp with 3 inputs on
back (RCA), a stereo headphone jack on the front, and volume, mic gain,
balance, base and treble controls for about $40. Exactly what I needed.
Now I have the only knob I missed - the volume control. Manufacturer is
The BAs should be a good fit. Nice slim line design for a 3-way speaker.
The important thing to remember is that when selecting speakers for a FLEX
radio (and the SDR-1000 for that matter), is that you want to use really good
wide range speakers that have a flat response from ~50ish Hz up
I got my 5000 Monday. I have everything working fb and last night, during
the opening, I installed a new P50VDG preamp.
I use a 3 el SteppIR with 6 meter passive element with about 75 feet of RG
213 to the shack.
The gain jumped 24 db, like it should and I adjusted the gain control to
OK, it's Friday, I have been doing computer work all week. Maybe I need a
break, because I am out of patience. I realized something tonight: SDR
1.18.1 is a VERY stable product. You guys and gals over at Flex are amazing
people. You must have infinite patience. I see now that your time is not
Have you tried resetting the database. With all your crashes, it could be
corrupted.
WSJT will change around the soundcard device numbers when soundcards are
re-recognized. It is one of the most difficult soundcard programs to get setup
and working right.
I highly recommend that you start
If your s meter is moving its not a weak signal..
Mike Penkas wrote:
I compared the 5000 with and without the preamp to my PRO3 and other
than higher S meter readings on the
PRO3 with preamp2 activated there wasnt a single signal I could not
hear equally well on the 5000A without any
Mark,
KWM switches can be big problems and none of the HW manufacturers will
guarantee PC operation through a KWM switch, (unless you are running
Server HW) the switching of the keyboard and mouse will throw the OS
into a tailspin at times..
I agree with Tim, start with a simpler
Thanks, Tim.
I installed the DPCLAT tool. I am seeing consistent 1000 micro-sec latency
on the DPCLAT tool. Oh, there are a few drops to 500 microseconds, and a
few spikes of 16000 microseconds or greater.
I have disabled everything I can think of in the Device manager, without
impairing the
24 matches
Mail list logo
