[Framers] (free) FrameMaker templates for different page sizes/orientations
Hi Framers, I just happened to see mention in LinkedIn of this nifty template pack for FrameMaker, for lots of pages sizes/orientations that are not "standard", and thought this list might find it useful: [1]https://framemaker.dk/en/azul-all-page-sizes. Although I'm not currently using FrameMaker, I'll certainly be downloading them for just-in-case. -Monique References 1. https://framemaker.dk/en/azul-all-page-sizes ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] Different page sizes in FM document
Hi all, Thanks a lot for your answers. I believe you’re right Richard. My problem is that there doesn’t seem to be a separate setting for page size for master pages – only for the entire document? Kind regards, Christiane -- Christiane Crety Technical writer Cobham SATCOM T : +45 3955 8682 M : +45 2092 2704 christiane.cr...@cobham.com<mailto:christiane.cr...@cobham.com> Thrane & Thrane A/S trading as Cobham SATCOM, Lundtoftegaardsvej 93 D, DK-2800, KGS. LYNGBY, Denmark. +45 3955 8800 www.cobham.com/satcom<http://www.cobham.com/satcom> Registered office Lundtoftegaardsvej 93D, DK-2800 Kgs. Lyngby, Denmark. Registered number DK - 65724618. Please consider the environment before printing this email From: Richard Simão Sent: 29. marts 2019 13:35 To: Crety, Christiane Subject: Re: [Framers] Different page sizes in FM document ** The Sender is from outside the Cobham Commercial Datacentre organisation ** Hi Christiane I believe that the best and easier way would be to create separated documents for different pages (working on the master page formats of course). As, anyway they will be numbered and included in a book project, the output would not be affected (structured documents or pdf). Em 28/03/2019 05:04, Crety, Christiane escreveu: Hi Framers, Does anyone know if it's possible in FM 2019 to have different page sizes within the same FM document? We may need to include diagrams etc. in A3 format in one of our A4 FM books. It would be a pain to have to create a separate file in the middle of a chapter to accommodate the A3 page. Isn't it possible to have A3 and A4 Master pages in the same document? Thanks in advance :) Christiane -- Christiane Crety Technical writer Cobham SATCOM T : +45 3955 8682 M : +45 2092 2704 christiane.cr...@cobham.com<mailto:christiane.cr...@cobham.com><mailto:christiane.cr...@cobham.com><mailto:christiane.cr...@cobham.com> Thrane & Thrane A/S trading as Cobham SATCOM, Lundtoftegaardsvej 93 D, DK-2800, KGS. LYNGBY, Denmark. +45 3955 8800 www.cobham.com/satcom<http://www.cobham.com/satcom><http://www.cobham.com/satcom><http://www.cobham.com/satcom> Registered office Lundtoftegaardsvej 93D, DK-2800 Kgs. Lyngby, Denmark. Registered number DK - 65724618. Please consider the environment before printing this email This e-mail and any files transmitted with it ("E-mail") is intended solely for the addressee(s) and may contain information that is proprietary, privileged, company confidential and/or exempt from disclosure under applicable law. If you are not the intended addressee(s), any disclosure, reproduction, copying, distribution or other use of the E-mail is strictly prohibited. It may also contain data subject to the International Traffic in Arms Regulations or United States Export Administration Regulations, particularly if this E-mail has been transmitted from a United States location, and cannot be disseminated, distributed or copied to foreign nationals, residing in the United States or abroad, without the prior approval of the U.S. Department of State or appropriate export licensing authority. If you have received this E-mail in error, please delete it and destroy all copies of this E-mail and notify the sender immediately via telephone call or return e-mail. Neither the company nor any subsidiary or affiliate or associated company nor any individual sending this E-mail accepts any liability in respect of the content (including errors and omissions) nor shall this e-mail be deemed to enter the company or any subsidiary or affiliate or associated company into a contract or to create any legally binding obligations unless expressly agreed to in writing under separate cover and timeliness of the E-mail which arise as a result of transmission. If verification is required, please request a hard copy version from the sender. ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com<mailto:framers@lists.frameusers.com> Visit the list's homepage at http://www.frameusers.com<http://www.frameusers.com> Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/<http://www.mail-archive.com/framers%40lists.frameusers.com/> Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com<http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com> Send administrative questions to listad...@frameusers.com<mailto:listad...@frameusers.com> -- [cid:image001.jpg@01D4E864.59C7B1A0] [Image removed by sender.]<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient> Livre de vírus. www.avast.com<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>. -- next part ---
Re: [Framers] Different page sizes in FM document
Hi Christiane, There is an undocumented way of doing it in FrameMaker 2019, but I am not positive if it made it into the release version. The idea is to create your document with a page size large enough to accommodate all the required page sizes in the document. So, to put it in US sizes, if your document is mainly 8-1/2 x 11 inches but you have some "foldout" pages that are 17 x 11 inches, then you create a 17 x 11 document. Your default master pages are set up so that the 8-1/2 x 11 content area is to the left side of the page and the extra 8-1/2 x 11 is on the right side of the page. Your foldout master pages use the whole 17 x 11 area. Your 8-1/2 x 11 master pages are "marked" with a hidden UserString property that indicates that these pages should be cropped when the PDF is created. So your PDF will have a mix of 8-1/2 x 11 and 17 x 11 pages. When I tested this, I used ExtendScript to automate the "marking" of the pages so that the user didn't have to worry about it. Again, I am not sure if this feature made it into the release version, but I can give it a try when I get a chance. If there is general interest in this, I can demonstrate it in one of my "anti-webinars". Rick Rick Quatro Carmen Publishing Inc. r...@frameexpert.com 585-729-6746 www.frameexpert.com/store/ -Original Message- From: Framers On Behalf Of Crety, Christiane Sent: Thursday, March 28, 2019 4:05 AM To: framers@lists.frameusers.com Subject: [Framers] Different page sizes in FM document Hi Framers, Does anyone know if it's possible in FM 2019 to have different page sizes within the same FM document? We may need to include diagrams etc. in A3 format in one of our A4 FM books. It would be a pain to have to create a separate file in the middle of a chapter to accommodate the A3 page. Isn't it possible to have A3 and A4 Master pages in the same document? Thanks in advance :) Christiane -- Christiane Crety Technical writer Cobham SATCOM T : +45 3955 8682 M : +45 2092 2704 christiane.cr...@cobham.com<mailto:christiane.cr...@cobham.com> Thrane & Thrane A/S trading as Cobham SATCOM, Lundtoftegaardsvej 93 D, DK-2800, KGS. LYNGBY, Denmark. +45 3955 8800 www.cobham.com/satcom<http://www.cobham.com/satcom> Registered office Lundtoftegaardsvej 93D, DK-2800 Kgs. Lyngby, Denmark. Registered number DK - 65724618. Please consider the environment before printing this email This e-mail and any files transmitted with it ("E-mail") is intended solely for the addressee(s) and may contain information that is proprietary, privileged, company confidential and/or exempt from disclosure under applicable law. If you are not the intended addressee(s), any disclosure, reproduction, copying, distribution or other use of the E-mail is strictly prohibited. It may also contain data subject to the International Traffic in Arms Regulations or United States Export Administration Regulations, particularly if this E-mail has been transmitted from a United States location, and cannot be disseminated, distributed or copied to foreign nationals, residing in the United States or abroad, without the prior approval of the U.S. Department of State or appropriate export licensing authority. If you have received this E-mail in error, please delete it and destroy all copies of this E-mail and notify the sender immediately via telephone call or return e-mail. Neither the company nor any subsidiary or affiliate or associated company nor any individual sending this E-mail accepts any liability in respect of the content (including errors and omissions) nor shall this e-mail be deemed to enter the company or any subsidiary or affiliate or associated company into a contract or to create any legally binding obligations unless expressly agreed to in writing under separate cover and timeliness of the E-mail which arise as a result of transmission. If verification is required, please request a hard copy version from the sender. ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] Different page sizes in FM document
Doug's right on the basics. If you want to have the chapter content flow and "stick" to the designated page format, you need to also create a unique tag to invoke the page using a Unstructured Master Page Map table on a reference page. [image: image.png] After it's set up (maybe 20 minutes), you need to execute the Apply Master Pages command to refresh the pagination either manually, or as part of your book building process. You can optionally lock pagination and freeze the doc with ESC F l k. Art Campbell art.campb...@gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Thu, Mar 28, 2019 at 5:52 AM Doug wrote: > I believe all you need to do is create a new master page and specify the > size for it. Haven't tried it though. > > On Thu, Mar 28, 2019 at 4:05 AM Crety, Christiane < > christiane.cr...@cobham.com> wrote: > > > Hi Framers, > > Does anyone know if it's possible in FM 2019 to have different page sizes > > within the same FM document? We may need to include diagrams etc. in A3 > > format in one of our A4 FM books. It would be a pain to have to create a > > separate file in the middle of a chapter to accommodate the A3 page. > Isn't > > it possible to have A3 and A4 Master pages in the same document? > > Thanks in advance :) > > Christiane > > > > -- > > Christiane Crety > > Technical writer > > Cobham SATCOM > > T : +45 3955 8682 > > M : +45 2092 2704 > > christiane.cr...@cobham.com<mailto:christiane.cr...@cobham.com> > > > > Thrane & Thrane A/S trading as Cobham SATCOM, Lundtoftegaardsvej 93 D, > > DK-2800, KGS. LYNGBY, Denmark. +45 3955 8800 www.cobham.com/satcom< > > http://www.cobham.com/satcom> > > > > Registered office Lundtoftegaardsvej 93D, DK-2800 Kgs. Lyngby, Denmark. > > Registered number DK - 65724618. > > > > Please consider the environment before printing this email > > > > This e-mail and any files transmitted with it ("E-mail") is intended > > solely for the addressee(s) and may contain information that is > > proprietary, privileged, company confidential and/or exempt from > disclosure > > under applicable law. If you are not the intended addressee(s), any > > disclosure, reproduction, copying, distribution or other use of the > E-mail > > is strictly prohibited. It may also contain data subject to the > > International Traffic in Arms Regulations or United States Export > > Administration Regulations, particularly if this E-mail has been > > transmitted from a United States location, and cannot be disseminated, > > distributed or copied to foreign nationals, residing in the United States > > or abroad, without the prior approval of the U.S. Department of State or > > appropriate export licensing authority. If you have received this E-mail > in > > error, please delete it and destroy all copies of this E-mail and notify > > the sender immediately via telephone call or return e-mail. > > > > Neither the company nor any subsidiary or affiliate or associated company > > nor any individual sending this E-mail accepts any liability in respect > of > > the content (including errors and omissions) nor shall this e-mail be > > deemed to enter the company or any subsidiary or affiliate or associated > > company into a contract or to create any legally binding obligations > unless > > expressly agreed to in writing under separate cover and timeliness of the > > E-mail which arise as a result of transmission. If verification is > > required, please request a hard copy version from the sender. > > ___ > > > > This message is from the Framers mailing list > > > > Send messages to framers@lists.frameusers.com > > Visit the list's homepage at http://www.frameusers.com > > Archives located at > > http://www.mail-archive.com/framers%40lists.frameusers.com/ > > Subscribe and unsubscribe at > > http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com > > Send administrative questions to listad...@frameusers.com > > > ___ > > This message is from the Framers mailing list > > Send messages to framers@lists.frameusers.com > Visit the list's homepage at http://www.frameusers.com > Archives located at > http://www.mail-archive.com/framers%40lists.frameusers.com/ > Subscribe and unsubscribe at >
Re: [Framers] Different page sizes in FM document
I believe all you need to do is create a new master page and specify the size for it. Haven't tried it though. On Thu, Mar 28, 2019 at 4:05 AM Crety, Christiane < christiane.cr...@cobham.com> wrote: > Hi Framers, > Does anyone know if it's possible in FM 2019 to have different page sizes > within the same FM document? We may need to include diagrams etc. in A3 > format in one of our A4 FM books. It would be a pain to have to create a > separate file in the middle of a chapter to accommodate the A3 page. Isn't > it possible to have A3 and A4 Master pages in the same document? > Thanks in advance :) > Christiane > > -- > Christiane Crety > Technical writer > Cobham SATCOM > T : +45 3955 8682 > M : +45 2092 2704 > christiane.cr...@cobham.com<mailto:christiane.cr...@cobham.com> > > Thrane & Thrane A/S trading as Cobham SATCOM, Lundtoftegaardsvej 93 D, > DK-2800, KGS. LYNGBY, Denmark. +45 3955 8800 www.cobham.com/satcom< > http://www.cobham.com/satcom> > > Registered office Lundtoftegaardsvej 93D, DK-2800 Kgs. Lyngby, Denmark. > Registered number DK - 65724618. > > Please consider the environment before printing this email > > This e-mail and any files transmitted with it ("E-mail") is intended > solely for the addressee(s) and may contain information that is > proprietary, privileged, company confidential and/or exempt from disclosure > under applicable law. If you are not the intended addressee(s), any > disclosure, reproduction, copying, distribution or other use of the E-mail > is strictly prohibited. It may also contain data subject to the > International Traffic in Arms Regulations or United States Export > Administration Regulations, particularly if this E-mail has been > transmitted from a United States location, and cannot be disseminated, > distributed or copied to foreign nationals, residing in the United States > or abroad, without the prior approval of the U.S. Department of State or > appropriate export licensing authority. If you have received this E-mail in > error, please delete it and destroy all copies of this E-mail and notify > the sender immediately via telephone call or return e-mail. > > Neither the company nor any subsidiary or affiliate or associated company > nor any individual sending this E-mail accepts any liability in respect of > the content (including errors and omissions) nor shall this e-mail be > deemed to enter the company or any subsidiary or affiliate or associated > company into a contract or to create any legally binding obligations unless > expressly agreed to in writing under separate cover and timeliness of the > E-mail which arise as a result of transmission. If verification is > required, please request a hard copy version from the sender. > ___ > > This message is from the Framers mailing list > > Send messages to framers@lists.frameusers.com > Visit the list's homepage at http://www.frameusers.com > Archives located at > http://www.mail-archive.com/framers%40lists.frameusers.com/ > Subscribe and unsubscribe at > http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com > Send administrative questions to listad...@frameusers.com > ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
[Framers] Different page sizes in FM document
Hi Framers, Does anyone know if it's possible in FM 2019 to have different page sizes within the same FM document? We may need to include diagrams etc. in A3 format in one of our A4 FM books. It would be a pain to have to create a separate file in the middle of a chapter to accommodate the A3 page. Isn't it possible to have A3 and A4 Master pages in the same document? Thanks in advance :) Christiane -- Christiane Crety Technical writer Cobham SATCOM T : +45 3955 8682 M : +45 2092 2704 christiane.cr...@cobham.com<mailto:christiane.cr...@cobham.com> Thrane & Thrane A/S trading as Cobham SATCOM, Lundtoftegaardsvej 93 D, DK-2800, KGS. LYNGBY, Denmark. +45 3955 8800 www.cobham.com/satcom<http://www.cobham.com/satcom> Registered office Lundtoftegaardsvej 93D, DK-2800 Kgs. Lyngby, Denmark. Registered number DK - 65724618. Please consider the environment before printing this email This e-mail and any files transmitted with it ("E-mail") is intended solely for the addressee(s) and may contain information that is proprietary, privileged, company confidential and/or exempt from disclosure under applicable law. If you are not the intended addressee(s), any disclosure, reproduction, copying, distribution or other use of the E-mail is strictly prohibited. It may also contain data subject to the International Traffic in Arms Regulations or United States Export Administration Regulations, particularly if this E-mail has been transmitted from a United States location, and cannot be disseminated, distributed or copied to foreign nationals, residing in the United States or abroad, without the prior approval of the U.S. Department of State or appropriate export licensing authority. If you have received this E-mail in error, please delete it and destroy all copies of this E-mail and notify the sender immediately via telephone call or return e-mail. Neither the company nor any subsidiary or affiliate or associated company nor any individual sending this E-mail accepts any liability in respect of the content (including errors and omissions) nor shall this e-mail be deemed to enter the company or any subsidiary or affiliate or associated company into a contract or to create any legally binding obligations unless expressly agreed to in writing under separate cover and timeliness of the E-mail which arise as a result of transmission. If verification is required, please request a hard copy version from the sender. ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
different page sizes in book
Mollye, I can be done on the template level. Make all your master pages 17x11 and then put a postscript code textbox on each master page you want trimmed to 8.5 x 11 at distill time. (You have to specify the rectangle in points in the postscript text box.) The code you want is: [/CropBox [0 0 612 792 ] /PAGE pdfmark All master pages that have this postscript textbox will distill to 8.5 x 11. Those that don't will be 17 x 11. Baruch Brodersen *** Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF?to the?two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) Director, Marketing Communications Content Management Professionals www.cmprofessionals.org ___ You are currently subscribed to Framers as baruch.brodersen at bigbandnet.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/baruch.brodersen%40bigbandnet.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
different page sizes in book
Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF to the two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) Director, Marketing Communications Content Management Professionals www.cmprofessionals.org ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: different page sizes in book
The easiest way to do this is to have the tab pages in separate files and insert them into book in the appropriate places, not to try to include them inside a letter-size file. You can adjust the page and chapter numbering so that they are chapter components by adjusting the Numbering properties of the files in the book file. If the large pages fall in the middle of a chapter, you can split the chapter into sub files with the tab page in the middle -- again, fixing the numbering at the book level. Art On Mon, Jul 14, 2008 at 3:36 PM, Mollye Barrett [EMAIL PROTECTED] wrote: Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF to the two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett -- Art Campbell [EMAIL PROTECTED] ... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl. -- Richard Thompson No disclaimers apply. DoD 358 ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: different page sizes in book
Have you tried rendering the PDF's as individual files, then combining in PDF? Not the direct solution you are looking for, but a bit less work than your current path. -Matt Sullivan GRAFIX Training, Inc. An Adobe Authorized Training Center www.grafixtraining.com 888 882-2819 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mollye Barrett Sent: Monday, July 14, 2008 12:36 PM To: FrameUsers Subject: different page sizes in book Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF to the two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) Director, Marketing Communications Content Management Professionals www.cmprofessionals.org ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/matt%40grafixtraining.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: different page sizes in book
Mollye, As others have suggested, we distill separate PDF files for each page size, then put them together in Acrobat. It's a manual process, but causes fewer problems than trying to do it automatically. Clint Clinton Owen | Senior Technical Writer | Crane Aerospace Electronics | +1 425-743-8674 | F: +1 425-743-8113 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mollye Barrett Sent: Monday, July 14, 2008 12:36 PM To: FrameUsers Subject: different page sizes in book Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF to the two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) Director, Marketing Communications Content Management Professionals www.cmprofessionals.org ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/clint.owen%40craneaerospace.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. We value your opinion! How may we serve you better? Please click the survey link to tell us how we are doing. http://www.craneae.com/surveys/satisfaction.htm Your feedback is of the utmost importance to us. Thank you for your time. Crane Aerospace Electronics Confidentiality Statement The information contained in this email message may be privileged and is confidential information intended only for the use of the recipient, or any employee or agent responsible to deliver it to the intended recipient. Any unauthorized use, distribution or copying of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately and destroy the original message and all attachments from your electronic files. This e-mail message has been scanned and cleared by MailMarshal ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: different page sizes in book
Mollye, I can be done on the template level. Make all your master pages 17x11 and then put a postscript code textbox on each master page you want trimmed to 8.5 x 11 at distill time. (You have to specify the rectangle in points in the postscript text box.) The code you want is: [/CropBox [0 0 612 792 ] /PAGE pdfmark All master pages that have this postscript textbox will distill to 8.5 x 11. Those that don't will be 17 x 11. Baruch Brodersen *** Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF to the two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) Director, Marketing Communications Content Management Professionals www.cmprofessionals.org ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/baruch.brodersen%40bigbandnet.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: different page sizes in book
Thanks for the suggestions. I'll tweak the template and try Baruch's method. My sense, though, is that future users will freak when they see the page sizes! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
different page sizes in book
Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF?to the?two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) Director, Marketing Communications Content Management Professionals www.cmprofessionals.org
different page sizes in book
The easiest way to do this is to have the tab pages in separate files and insert them into book in the appropriate places, not to try to include them inside a letter-size file. You can adjust the page and chapter numbering so that they are chapter components by adjusting the Numbering properties of the files in the book file. If the large pages fall in the middle of a chapter, you can split the chapter into sub files with the tab page in the middle -- again, fixing the numbering at the book level. Art On Mon, Jul 14, 2008 at 3:36 PM, Mollye Barrett wrote: > > > Hi All, > > I'm sure this has been asked and answered but I'm on a short lead... > > I have a book that is 99% 8.5 x 11. However, there are also a few > 17 x 11 (drawing foldouts) that go in to the book at the end of > chapters. Right now, it appears that I have to choose one size when I > render (PDF settings) and insert the 17 x 11 pages manually. > > My goal is to put all the files in one book and render the PDF to > the two page sizes without manual intervention. Is this possible? If > so, how? > > Any help, as always, is greatly appreciated! > > Mollye Barrett -- Art Campbell art.campbell at gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358
different page sizes in book
Have you tried rendering the PDF's as individual files, then combining in PDF? Not the direct solution you are looking for, but a bit less work than your current path. -Matt Sullivan GRAFIX Training, Inc. An Adobe Authorized Training Center www.grafixtraining.com 888 882-2819 -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Mollye Barrett Sent: Monday, July 14, 2008 12:36 PM To: FrameUsers Subject: different page sizes in book Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF?to the?two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) Director, Marketing Communications Content Management Professionals www.cmprofessionals.org ___ You are currently subscribed to Framers as matt at grafixtraining.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/matt%40grafixtraining.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
different page sizes in book
Mollye, As others have suggested, we distill separate PDF files for each page size, then put them together in Acrobat. It's a manual process, but causes fewer problems than trying to do it automatically. Clint Clinton Owen | Senior Technical Writer | Crane Aerospace & Electronics | +1 425-743-8674 | F: +1 425-743-8113 -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Mollye Barrett Sent: Monday, July 14, 2008 12:36 PM To: FrameUsers Subject: different page sizes in book Hi All, I'm sure this has been asked and answered but I'm on a short lead... I have a book that is 99% 8.5 x 11. However, there are also a few 17 x 11 (drawing foldouts) that go in to the book at the end of chapters. Right now, it appears that I have to choose one size when I render (PDF settings) and insert the 17 x 11 pages manually. My goal is to put all the files in one book and render the PDF?to the?two page sizes without manual intervention. Is this possible? If so, how? Any help, as always, is greatly appreciated! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell) Director, Marketing Communications Content Management Professionals www.cmprofessionals.org ___ You are currently subscribed to Framers as Clint.Owen at craneaerospace.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/clint.owen%40craneaerospace.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. We value your opinion! How may we serve you better? Please click the survey link to tell us how we are doing. http://www.craneae.com/surveys/satisfaction.htm Your feedback is of the utmost importance to us. Thank you for your time. >>>>>>>>>> Crane Aerospace & Electronics Confidentiality Statement <<<<<<<<<< The information contained in this email message may be privileged and is confidential information intended only for the use of the recipient, or any employee or agent responsible to deliver it to the intended recipient. Any unauthorized use, distribution or copying of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately and destroy the original message and all attachments from your electronic files. This e-mail message has been scanned and cleared by MailMarshal
different page sizes in book
Thanks for the suggestions. I'll tweak the template and try Baruch's method. My sense, though, is that future users will freak when they see the page sizes! Mollye Barrett ClearPath, LLC content management solutions www.clearpath.cc 414-331-1378 (cell)
different page sizes
Hello all, I have a book file. One of the files has 420*297 page size, the others are in A4. When I print the book it ask me about the document size. If I set A4 size, my big file cutted on the margin...bad. If I print just the 420*297 size file to A4 paper it is OK. If I set to 420*297 some of the files are OK but some of them are in little size. What is the solution for that issue? How I have to print a book like this if would like to have correct size on all files. I have FM 7.2 on Windows 2000 SP4