I just did a fresh install of RC1+ onto my workstation machine and proceeded
to build X. A previous package install had installed the perl package.
Unfortunately, during the build of the X fonts, it stopped and said that
/usr/X11R6/bin/mkhtmlindex could not be found. Sure enough the file was
I decided to re-install RC1 with some changes that might make getting
core dumps easier. Now I get the acpi crash (previously reported)
before I can get a good start on the install.
Wouldn't it be a good idea to set up the ISOs to not use acpi so that
acpi bugs don't block installation?
This problem and the general 'console freeze' problem, and possibly
even the 'floppy doesn't work anymore' problem should be fixed. The
problem was with the ahc and ahd drivers corrupting the callout list
used to trigger timeouts in the kernel.
Scott
-Original Message-
From: Holm
It's not the fact that I have an extra, unused on-board video
(checked).
Also, when the video output stops, the console still works
fine for input
(keyboard never stops working normally). Also, I can
successfully start X
just fine. It's just the vty's output that is stopped (all
On Mon, Dec 02, 2002 at 10:40:21AM -0800, Manfred Antar wrote:
There don't seem to be any hung processes. I can use X,
and I can also
ssh into the box, so it's the console only. Can't
switch to different
vty's, and the one i'm on is frozen, no response to any keys.
Same here
Hi,
Yesterday I installed a jpsnap (FreeBSD christine.energyhq.tk
5.0-CURRENT-20021115-JPSNAP i386), and tried to setup a RAID0 config
with two disks. raidctl -C goes fine, so does -I and -iv.
Then fdisk'ed
and disklabelled. But when I tried to newfs the newly created
partition
I
On Fri, 18 Oct 2002, Scott Long wrote:
[...]
**Warning, rant**
The ports collection is one of the crown jewels of FreeBSD.
Unfortunately, even as more ports committers are added, more and
more ports break or become harder to build. On top of that,
pkg_add has become close to
I have just discovered the hard way that the kthread.9 manual page is
slightly out of date.
Having never done man page work before, I've attached a diff of the
proposed change and if someone could give this a once-over and fix
and/or commit it, that'd rock.
Thanks. =)
Thanks. I knew
Terry Lambert wrote:
Emiel Kollof wrote:
* Peter Wemm ([EMAIL PROTECTED]) wrote:
vinum is so much unbelievable stuff in it. Consider this stuff:
sys/dev/vinum/vinumio.c:
[ ... ]
This crud has *got* to be taken out and shot, then
reworked to do it
properly.
The aic 7890/91 is a dual 160 MB controller.
No, the 7890/91 is 80MB/s max.
Adaptec's
documentation expliciely states that the bus speed is the
rate of the _slowest_ device on the channel.
No it does not.
Did you try
placing the cd on the B channel or
Is anyone else seeing something similar to the following? I'm able to
build world, but can't get this kernel build to budge. I've not seen
this error before so I'm a tad lost as to where to poke next. -sc
This is the third report of this that I've seen, and I'm completely
baffled. How
Hi,
Are any plans to move to GCC 3.2 in current?
Since it is just an ABI change it should work, without changing
anything.
It would give us a stable, multivendor ABI to work off of for the next
line of 5.x releases.
Just a thought.
Jesse Gross
Yes, moving to gcc32 is highly
Yes, moving to gcc32 is highly desirable for -current, otherwise we
will be stuck at gcc311 for the entire life of FreeBSD 5.x. The
important question to ask is, who will do the dirty work?
Moving to GCC 3.2 will do us no good. The lifetime of the 3.2 release
will be pretty short
All,
I just cvsuped and built a new kernel and world last night, updating from a
2 week old -current that was working fine. Now, TCP seems broken. After I
open and close a single TCP session, any further TCP opens result in either
a failure (connection refused) or a system deadlock. ICMP
Looks like someone broke AC97 rate measurement in -CURRENT
-STABLE measures AC97 rate well (about 55900). Current gives about
41000...
Hardware is Compaq EXD C600 (-STABLE) and Compaq iPAQ C700 (-CURRENT)
Both are i815 equipped with SoundMAX AC97 codec...
Sincerely, Maxim M.
All,
I just wanted to bring to light several issues that I'm seeing now. I
installed a new laptop with the 20020620 current snapshot from
snapshot.jp.freebsd.org, then proceeded to bring it up the date (as of last
night). After building and installing world and kernel from these
updated
It does for me to with 2048 as the block size. I won't say what
block size I was using.
Thanks, I wasn't even thinking block size.
Yes, the block size is checked by the driver, so that it knows whether to
rip the disk in raw 2352 byte sectors. dd defaults to 512 bytes, which
the driver
Could people test this in-kernel DRM and tell me how it works
for them?
Works fine for me on a Matrox G400 with the standard Mesa apps, Linux Unreal
Tournament, and a custom build of Quake2 for FreeBSD. Good work!
Scott
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
Hi,
i cant record from /dev/dsp with the record device 'mic'. Is
there support
for the microphone input?
What sound card are you using?
Scott
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
This is not possible yet under FreeBSD. I have a UDF work-in-progress at
http://people.freebsd.org/~scott/udf, but it cannot do CD-RW yet.
-Original Message-
From: S.W.Liu [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 14, 2001 6:52 AM
To: [EMAIL PROTECTED]
Subject: How to mount
I've also seen this while making ports. If I ^C while fetch is trying to
connect to the distfile site, it doesn't die. It might be that the mk.*
stuff is spinning off shells and allowing them to become disconnected from
terminal input somehow.
-Original Message-
From: Szilveszter
I applied Tor's patch and while it helped, I still got a panic
(deallocate_dependencies: active_pagedep, which, btw, Tor's patch added)
partway into a buildworld. I've resigned to disabling softupdates on my
machine for now =-(
-Original Message-
From: Bruce A. Mah [mailto:[EMAIL
I'll add a 'me too'. I've been doing the same workaround with success, but
it's still very frustrating. I can also guarantee a softdep freelist panic
about 1/4 the way into a buildworld. I can provide a trace if anyone is
interested.
Scott
-Original Message-
From: Marc G. Fournier
23 matches
Mail list logo
