Hello,
when I try to play music with xmms, i get the error: Please chech that: Your
soundcard is configured. You have the correct output plugin selected. No
other program is blocking the soundcard.
My soundcard is working well, and in the console i see the xmms error: **
WARNING **: oss_open():
+0200, Ivan Zenzerović wrote:
I have a problem with my firewall. When booting freebsd i get the
message
that pf is enabling, but there are syntax errors in the /etc/pf.conf
file
and that no IP adresses were found for sk0 network. What should i change
here?
I took the conf file from
http
On 4/5/07, Drew Tomlinson [EMAIL PROTECTED] wrote:
On 4/4/2007 3:51 PM Ivan Zenzerović wrote:
Hi,
I just put instead of sk0 nve0 (wich is my ethernet card). But, on boot
i
see that it searches for ALTQ and I saw that it can be turned on only by
configuring the kernel. Is there maybe any
/index.html#sec
Ivan
On 3/30/07, Roland Smith [EMAIL PROTECTED] wrote:
On Fri, Mar 30, 2007 at 07:21:32PM +0200, Ivan Zenzerović wrote:
Try xvidtune.
Thanks, I'll try. I knew of that program, but with time I forgot it's
name.
I must say that freebsd works very well as a workstation
On 4/1/07, Warren Block [EMAIL PROTECTED] wrote:
On Sun, 1 Apr 2007, Ivan Zenzerovię wrote:
zenzo|line|HP6L|lp|Hewlett z Packard Laser Jet6L:\
:sh:sd=/var/spool/zenzo:\
:lp=/dev/lpt0:\
:if=/usr/local/libexec/if-simple:\
# :if=/usr/local/libexec/hpif:
still
Hi guys,
I have now another problem. I tryed to set up my printer (HP LaserJet 6L)
following the instructions in the handbook. Ok, the printer responds, but
when i try to print it only takes paper and prints eventually a line of some
strange signs. I set it up at first on interrupt-driven mode,
Thanks, I'll try to configure it now.
/etc/printcap/
# @(#)printcap5.3 (Berkeley) 6/30/90
# $FreeBSD: src/etc/printcap,v 1.14 2004/06/06 11:46:27 schweikh Exp $
#
# This enables a simple local raw printer, hooked up to the first
# parallel port. No kind of filtering is done, so
Hi,
still the same, I put the device ljet5, because there is no ljet6. I just
don't get it, why is doing that!
Ivan
On 4/1/07, Ivan Zenzerović [EMAIL PROTECTED] wrote:
Thanks, I'll try to configure it now.
/etc/printcap/
# @(#)printcap5.3 (Berkeley) 6/30/90
# $FreeBSD: src/etc
Hi,
I'm trying to mount an ntfs drive with mount_ntfs. Now, the system sees the
second hard disk, but shows only one partition, ad1s1 wich is NTFS, but on
that disk there are 3 ntfs partitions and the system doesn't see them. On
windows they work fine.
Another thing, after a day or two I tried
Ok, I think I understand, but tell me, is there any way I can read those
partitions from freebsd? If this helps, on that disk are no windows, there
are 3 ntfs partitions.
Ivan
On 3/30/07, Derek Ragona [EMAIL PROTECTED] wrote:
You are able to mount the primary partition, not the extended
On 3/30/07, Roland Smith [EMAIL PROTECTED] wrote:
On Fri, Mar 30, 2007 at 12:02:11PM -0400, Jerry McAllister wrote:
On Fri, Mar 30, 2007 at 08:09:51AM +0200, Ivan Zenzerovi? wrote:
Hello, here I am again with another problem.
Thanks for your answers, I managed to setup my system, and
Could I maybe fix this with trying to make the partitions again or something
like this from windows with partition magic? I supose that on the same way
freebsd does with it's partitions?
Ivan
On 3/30/07, Derek Ragona [EMAIL PROTECTED] wrote:
Not that I know of. The extended partitions are
Hello, here I am again with another problem.
Thanks for your answers, I managed to setup my system, and now almost
everything works. Still, I must configure my printer (Hp LaserJet 6L), but
this is not the issue now. I have troubles with my monitor picture: if I set
up the monitor picture for
hello again.
I made a mistake during post install config. I put a name that I don't want
for my computer, and when I logon as root it's written in the comand line.
How di I change it?
Ivan
On 3/28/07, Giorgos Keramidas [EMAIL PROTECTED] wrote:
On 2007-03-27 23:36, Ivan Zenzerovi? [EMAIL
Thanks, i managed to fix this by running the post install configuration with
sysinstall. But I have another problem. Every time i start the system my
soundcard won't work. I must tipe kldload snd_driver and then logoff and
again logon in kde to get my soundcard working. How can i fix this?
Ivan
Hi guys,
i managed to install it, and, in fact I'm working on it right now. It's
great, just tell me, I should compile my kernel at this point? And a
question: I don't like this xorg, and I have installed KDE but how do I run
KDE?
Thanks,
Ivan
On 3/27/07, Jerry McAllister [EMAIL PROTECTED]
Hi to all.
My name is Ivan and I'm new to FreeBSD and Unix, I worked a little in
Linux, but it was a long time ago. I downloaded the 5.5 release and I
plan installing it. I downloaded also all availible docs. I wondered
if it is ok to start with this. And, also, I have an integrated GPU,
it
Hi,
when I tried with Knoppix, the X system worked well, but with debian I had
some problems. I'll try installing it on this week so I'll know everything.
Thanks for your answer.
Ivan
On 3/27/07, Roland Smith [EMAIL PROTECTED] wrote:
On Mon, Mar 26, 2007 at 11:09:52PM +0200, Ivan Zenzerović
18 matches
Mail list logo
