Frank Leonhardt skrev 2013-10-07 13:37:
In the good'ol days I could make UNIX ring a bell (literally) by sending
\a to the console TTY (an ASR33 in my case). Now there's an electronic
synthesised ting or beep from an terminal emulator IF it's got a sound
card and so on, and an IBM-PC had a
In the daily security run I see the following:
Checking setuid files and devices:
Checking negative group permissions:
3791965 -rwxr--r-x 1 admin wheel 172 Mar 9 10:59:55 2011
/usr/home/admin/bin/noip_update.sh
Is it just a reminder that the group has no x permissions or should I
2013-07-12 13:25, Leslie Jensen skrev:
When I run
portsnap fetch update
pkg version -vIL=
It returns
pkg: Unable to open ports directory /usr/ports: No such file or directory
The directory is there and I can list the contents.
What's going on?
Thanks
/Leslie
When I run
portsnap fetch update
pkg version -vIL=
It returns
pkg: Unable to open ports directory /usr/ports: No such file or directory
The directory is there and I can list the contents.
What's going on?
Thanks
/Leslie
___
Smb is slow by design compared to nfs.
/Leslie
Skickat från min Samsung Mobil
Originalmeddelande
Från: Andrea Venturoli m...@netfence.it
Datum:
Till: freebsd-questions@freebsd.org
Rubrik: Re: Possibly OT: NFS vs SMB performance
On 07/05/13 20:42, Terje Elde wrote:
On
2013-06-28 19:07, Jerry skrev:
Using Firefox 21, if I enter this URL:
http://www.nclawreview.org/documents/91/1/wegner.pdf
nothing happens. The PDF is not displayed nor is there any evidence
that Firefox did anything at all.
Now, entering the same URL using the same version of Firefox on a
2013-06-09 07:46, Leslie Jensen skrev:
2013-06-08 17:28, Polytropon skrev:
On Sat, 08 Jun 2013 12:20:56 +0200, Leslie Jensen wrote:
I've been using XDM as login manager for years. Since the latest Xorg
upgrade, XDM cannot start XFCE4 as it used to.
Strange that this happens after
I've been using XDM as login manager for years. Since the latest Xorg
upgrade, XDM cannot start XFCE4 as it used to.
What happens is that after I've given my password and hit enter, the
screen goes black and after a while it returns to the XDM log in dialogue.
I've attached the users
2013-06-08 17:28, Polytropon skrev:
On Sat, 08 Jun 2013 12:20:56 +0200, Leslie Jensen wrote:
I've been using XDM as login manager for years. Since the latest Xorg
upgrade, XDM cannot start XFCE4 as it used to.
Strange that this happens after an upgrade. What initalization
mechanism do you
I've upgraded a machine with freebsd-update from 8.3 to 9.1.
After the first restart I edited /etc/fstab in single user mode because
the names on the disks had changed. But the zpool I have seem to have a
problem and I'm not sure on how to recover it.
May 22 12:00:39 kernel: ZFS WARNING:
I have a remote Samba Server where Windows machines place backup files
once a day. The format is
backup_2013-05-03_13.45.44_.zip
Before the Windows client places the file it removes the file from the
day before.
In turn I do a backup of the backup files once every week(Friday) to
2013-05-20 15:52, Miguel Barbosa Gonçalves skrev:
On 20 May 2013 13:34, Leslie Jensen les...@eskk.nu wrote:
I have a remote Samba Server where Windows machines place backup files
once a day. The format is
backup_2013-05-03_13.45.44_.**zip
Before the Windows client places the file
I ran into a little problem with my old crontab scripts.
I do the following:
portsnap -I cron update
/usr/local/sbin/portmaster -y --clean-distfiles
/usr/local/sbin/portmaster -aF
pkg version -vIL
After changing to pkg the check for outdated ports fails on the -L flag
pkg version -vIL
I'm having some problems with my Marwel NIC (msk0) and loss of connection.
I found a solution where one could use the settings below:
In
/etc/sysctl.conf
net.inet.tcp.tso=0
And in
/boot/loader.conf
hw.msk.msi_disable=1
This seems to work but the trade-off is that I now only have 100
...spelling correction
Should be Marvell
2013-05-13 09:48, Leslie Jensen skrev:
I'm having some problems with my Marvell NIC (msk0) and loss of connection.
I found a solution where one could use the settings below:
In
/etc/sysctl.conf
net.inet.tcp.tso=0
And in
/boot/loader.conf
I do some work on remote machines and sometimes I have a need to execute
additional commands after for example a portmaster -a command.
Normally I use the to separate commands but this does not work when
portmaster displays pkg-messages.
I cannot see in the portmaster manpage that
I'm specifically thinking of the directories that has to be emptied or
deleted.
Thanks
/Leslie
Using portmaster to do a complete reinstallation of all your ports:
1. portmaster --list-origins
When reading the portmaster man page I just came to wonder if this isn't
a typo?
[--force-config|-G] [-aftv] -F
fetch distfiles only
Shouldn't the -F be to the far left?
Thanks
/Leslie
___
freebsd-questions@freebsd.org mailing list
I'm seeing the same type of behaviour on my computer. It's a 9.1-RELEASE with
xfce as desktop environment. I usually ssh to a remote server and do port
upgrades. I leave the terminal on it's own desktop and upon returning it's
frozen. I can't get it to react on keyboard input. I close the
I've just changed to pkg and thought that I would try out how it works.
After copying the pkg.conf.sample to pkg.conf and doing
pkg update
Updating repository catalogue
repo.txz100% 1836 1.8KB/s 1.8KB/s 00:00
I tried the command pkg search k3b and it returned
2013-04-02 11:22, Jeff Tipton skrev:
On 04/02/2013 11:35, Leslie Jensen wrote:
I've just changed to pkg and thought that I would try out how it works.
After copying the pkg.conf.sample to pkg.conf and doing
pkg update
Updating repository catalogue
repo.txz100% 1836
Thank you! I had not read the last announcements. That explains it all.
Sent from my Samsung Mobile
Originalmeddelande
Från: Tijl Coosemans t...@coosemans.org
Datum:
Till: Leslie Jensen les...@eskk.nu
Kopia: FreeBSD Questions Mailing List freebsd-questions@freebsd.org
Are pkg dependent on FreeBSD Version?
I've moved two 9.1 machines and I have one 8.2 that I would like to move
to pkg.
So can I move the 8.2 machine also?
Thanks
/Leslie
___
freebsd-questions@freebsd.org mailing list
I've done pkg2ng and added WITH_PKGNG=yes to /etc/make.conf
When I do
portsnap fetch update
and
pkg_version -vIL=
To check which ports needs updating, I now get a message for all
installed ports that the info are corrupt.
Like this
pkg_version: the package info for package 'zip-3.0' is
Hello list.
I'm trying the following on my 9.1-RELEASE #0 system:
Mounting the external HD
ntfs-3g /dev/da0s1 /mnt/backup/
And doing
rsync -av /home/les /mnt/backup/BSD_backup/
I get Building incremental file list for about one minute then my
system freezes and reboots.
I'm aware that
2013-03-25 10:40, Aryeh Friedman skrev:
How do I tell portmaster -ad to ignore certain ports because they are
broken such as editors/libreoffice is currently marked as (I am sure this
will change soon)
___
freebsd-questions@freebsd.org mailing list
My system
9.1-RELEASE
ll /var/crash/
total 697996
-rw-r--r-- 1 root wheel 2 14 Mar 12:51 bounds
-rw--- 1 root wheel 577047 14 Mar 12:52 core.txt.0
-rw--- 1 root wheel460 14 Mar 12:51 info.0
-rw-r--r-- 1 root wheel 5 4 Dec 10:34 minfree
-rw---
2013-03-14 14:55, Damien Fleuriot skrev:
On 14 Mar 2013, at 12:57, Leslie Jensen les...@eskk.nu wrote:
My system
9.1-RELEASE
ll /var/crash/
total 697996
-rw-r--r-- 1 root wheel 2 14 Mar 12:51 bounds
-rw--- 1 root wheel 577047 14 Mar 12:52 core.txt.0
-rw--- 1
I've had problems when I haven't set the printer to server default. I use xpdf
and print with the printer choice lp
Skickat från min Samsung Mobil
Originalmeddelande
Från: Joseph A. Nagy, Jr jnagyjr1...@gmail.com
Datum:
Till: Questions @ FreeBSD questi...@freebsd.org
2013-02-17 10:26, takCoder skrev:
hi everyone,
maybe this question is somehow off-topic but now i'm in an urgent need of
any recommendations..
*here's the question:*
how to restore lost data of a formatted bsd partition?!
*and here's what has happened to me:*
i was trying to install windows
I'm using vnc-4.1.3_5 on FreeBSD 9.1-RELEASE with xfce4.
I have about 10 different hosts that I usually connect to.
I would like these hosts to be in a drop down menu so I just have to
pick the one I need to connect to.
From what I can read on-line the hosts should be saved to
2013-01-16 12:14, Bas Smeelen skrev:
On 01/16/2013 12:08 PM, Leslie Jensen wrote:
I'm using vnc-4.1.3_5 on FreeBSD 9.1-RELEASE with xfce4.
I have about 10 different hosts that I usually connect to.
I would like these hosts to be in a drop down menu so I just have to
pick the one I need
Hello.
After upgrading to 9.1-RELEASE I'm seeing this message first in the
daily output.
Should I do anything to get rid of the message or is it ok?
Thanks
/Leslie
-
Removing old temporary files:
find: -delete: unlink(./.sujournal): Operation not
Hello.
I posted this on the freebsd-virtualization list but got no answers so
now I hope that someone here can shed the light for me.
I have a Windows7 guest OS in Virtualbox on a FreeBSD 9.1-RELEASE system.
I've followed the instructions in the handbook for enabling USB-support
in
I need k3b on a newly installed 9.1-RELEASE system.
I wonder if I miss out on some functionality if I go with version
without KDE?
I use XFCE4 as my Desktop.
Thanks
/Leslie
___
freebsd-questions@freebsd.org mailing list
Hello.
I want to write a script, where I as a normal user, can back up my files
with rsync to another machine (pc01), which shares a directory via NFS.
I have an entry in the local machines /etc/fstab
pc01:/backup /mnt/backupnfs rw,noauto 0 0
The command:
mount
2013-01-02 17:29, Leslie Jensen skrev:
Hello.
I want to write a script, where I as a normal user, can back up my files
with rsync to another machine (pc01), which shares a directory via NFS.
I have an entry in the local machines /etc/fstab
pc01:/backup /mnt/backupnfs rw,noauto
Damien Fleuriot skrev 2012-11-29 00:28:
# 1/ redirect web traffic to the proxy $proxy on port $proxyport
rdr in on $int_if inet proto tcp from !$proxy to any port 80 - $proxy
port $proxyport tag rdr_proxy
# 2/ redirect FTP traffic to the ftp-proxy running on the local
machine on port 8021
David Demelier skrev 2012-12-10 22:23:
Hi,
I added a file for handling shutdown / reboot for Xfce4, the content is
located in
/usr/local/etc/polkit-1/localauthority/50-local.d/51-sys-mgmt.pkla.
[Restart]
Identity=unix-group:operator
Action=org.freedesktop.consolekit.system.restart
Volodymyr Kostyrko skrev 2012-11-26 21:50:
rdr pass proto tcp from any to any port ftp - 127.0.0.1 port 8021
# redirect www trafic to proxy
rdr on $int_if inet proto tcp from $internal_net to any port
$proxy_services - $proxy port 8080
I could be wrong here but I think you have a loop.
Doug Sampson skrev 2012-11-27 18:34:
[...]
Rules from pf.conf
# macros
ext_if=xl0
int_if=bge0
tcp_services={ 22, 993, 5910:5917 }
tcp_priv_services={ 389, 443 }
proxy_services = { 21, 80 }
icmp_types={ echoreq unreach squench timex }
Volodymyr Kostyrko skrev 2012-11-26 21:50:
26.11.2012 20:40, Leslie Jensen:
Rules from pf.conf
# macros
ext_if=xl0
int_if=bge0
tcp_services={ 22, 993, 5910:5917 }
tcp_priv_services={ 389, 443 }
proxy_services = { 21, 80 }
icmp_types={ echoreq
I've upgraded squid from 3.1 to 3.2. Starting squid 3.2 with the same
configuration file now gives me errors in cache.log when one tries to
access any site, and of course no access!
2012/11/24 16:24:56 kid1| WARNING: Forwarding loop detected for:
Reverting back to 3.1 works.
I know there
Thank you very much for your work on this. I have found this
conversation and your article very informative.
I've already installed W7 on my SSD but I let the installation program
create the windows (MBR) partition.
I'm going to install FreeBSD 9.1 as soon as it is ready so I want to ask
Hello
I mainly use LibreOffice and it works for me.
My problem now is that the build time for LibreOffice on a little older
hardware is very long.
Is there an alternative to writer that does not take that long to build?
If I can get an alternative to Calc also it's a plus but not a big
Polytropon skrev 2012-11-15 10:12:
On Thu, 15 Nov 2012 10:06:56 +0100, Leslie Jensen wrote:
Hello
I mainly use LibreOffice and it works for me.
My problem now is that the build time for LibreOffice on a little older
hardware is very long.
Why not use the binary install method (pkg_add -r
I managed to shut down a machine with an NFS share before the connected
client was shut down.
Now this client won't shut down. It stands at : All buffers synced.
I suspect it's waiting for the NFS server in order to disconnect.
Is there any time-out I must wait for? Will it help to bring
Thank you :-)
I'll study it closer.
/Leslie
2012-11-15 15:15, Adam Vande More skrev:
On Thu, Nov 15, 2012 at 7:37 AM, Leslie Jensen les...@eskk.nu wrote:
I managed to shut down a machine with an NFS share before the connected
client was shut down.
Now this client won't shut down
I'm configuring smartd on a newly installed system, 9.1-RC3
The message below is in my /var/log/messages
Nov 15 14:39:49 blj01 kernel: ada0: Maxtor 6B300S0 BANC1G10 ATA-7 SATA
1.x dev
ice
Nov 15 14:39:49 blj01 kernel: ada0: 150.000MB/s transfers (SATA, UDMA5,
PIO 8192
bytes)
Nov 15
I just read in another post about disklayout
_
According to the manual as of 9.0-RELEASE the default fragment
and block sizes for newfs are 4k and 32k, so provided your
partitions/slices are 4k aligned everything Should Just Work.
I've just installed 9.1-RC3 on a machine.
When starting I get the error:
Starting default moused
moused: unable to open /dev/psm0: No such file or directory
I have moused_enable=YES in rc.conf
Do I need to set some right in devfs for it to go away?
Thanks
/Leslie
Quite some time ago there was a solution posted where you had to go to addons
and install from a file. The language file is downloaded to distfiles/xpi. So
you just point to the file and choose to install it.
And if I remember correctly you also have to set the language again in
about:config
Manish Jain skrev 2012-11-04 12:37:
Date: Sun, 4 Nov 2012 16:41:45 +0530
From: bourne.ident...@hotmail.com
To: les...@eskk.nu
CC: freebsd-questions@freebsd.org
Subject: Re: My freebsd partition changed by Windows chkdsk (Leslie Jensen)
On 04-Nov-12 13:17, Leslie Jensen wrote:
Manish
Manish Jain skrev 2012-11-02 19:18:
1) Boot from your FreeBSD CD/DVD, enter the slice editor and
change the type of your FreeBSD slice back to 165. Do not press Q.
Press W instead. Conform with Yes to the warning, and then press
Ctrl+Alt+Del to abort the installation.
2) Boot from your
2012-11-02 04:39, Warren Block skrev:
On Thu, 1 Nov 2012, Leslie Jensen wrote:
I've replaced my dual boot hard drive with an SSD.
My hard drive had one 100 GB windows partition and one 300 Gb Freebsd
slice with five partitions (/, /usr, /var, /tmp and /home).
In order to move my Win7
Jerry skrev 2012-11-02 12:22:
On Thu, 01 Nov 2012 10:26:33 +0100
Leslie Jensen articulated:
I've replaced my dual boot hard drive with an SSD.
My hard drive had one 100 GB windows partition and one 300 Gb Freebsd
slice with five partitions (/, /usr, /var, /tmp and /home).
In order to move
Manish Jain skrev 2012-11-02 14:39:
That I trusted the chkdsk program to do what I told it to do was in
retrospect a bit naive ;-) I do have a backup although it's not as
recent as I would have liked.
Can you think of any way to perhaps recover the data from the freebsd
partition?
I trust
2012-11-02 16:12, Warren Block skrev:
On Fri, 2 Nov 2012, Leslie Jensen wrote:
I use sysinstall and fdisk to find the disk, and I get
Please don't use sysinstall for this or any disk formatting.
Offset Size(ST) End Name PType Desc Subtype
Flags
0 63
I've replaced my dual boot hard drive with an SSD.
My hard drive had one 100 GB windows partition and one 300 Gb Freebsd
slice with five partitions (/, /usr, /var, /tmp and /home).
In order to move my Win7 partition a Norton Ghost program was supplied
with the new disk.
When trying to
According to
http://www.se.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-samba.html
One can use
samba_enable=YES
Or, for fine grain control:
nmbd_enable=YES
smbd_enable=YES
20121022:
AFFECTS: users of net/samba36
AUTHOR: ti...@freebsd.org
Startup rc.d/samba script was
Got my new SSD. Have some additional questions.
My old disk is MBR partitioned. I want to reserve only a part of the
disk for my Win7 installation and in order to do that I must initialise
the disk (This is in Windows7).
A question comes up about using MBR or GPT (GUID Partition Table)
I
Leslie Jensen skrev 2012-10-09 17:46:
Got my new SSD. Have some additional questions.
My old disk is MBR partitioned. I want to reserve only a part of the
disk for my Win7 installation and in order to do that I must initialise
the disk (This is in Windows7).
A question comes up about using
Hello list.
I'm considering to purchase a SSD.
The one I have in mind for the moment is this one.
Samsung 830 Series MZ-7PC512D 512GB
I'm not going for a top of the line disk but I would like to ask if
anyone has experience with SSD's and FreeBSD (9.1 is my plan).
Just to complicate
I get this error and I'm not sure how to fix it.
Any suggestions?
My system is 8.2-RELEASE-p9 with all src downloaded via csup.
Thanks
/Leslie
=== Returning to build of fusefs-kmod-0.3.9.p1.20080208_10
=== Configuring for fusefs-kmod-0.3.9.p1.20080208_10
cp:
2012-08-13 09:03, Jeff Tipton skrev:
On 08/13/2012 09:34, Leslie Jensen wrote:
I get this error and I'm not sure how to fix it.
Any suggestions?
My system is 8.2-RELEASE-p9 with all src downloaded via csup.
Thanks
/Leslie
=== Returning to build of fusefs-kmod-0.3.9.p1.20080208_10
Hi List.
I'm using
fusefs_enable=YES
in /etc/rc.conf
And
/dev/ad4s2 /home/mnt/windows ntfs rw,noauto 0 0
in /etc/fstab
I can read the NTFS file system and copy from it but I can't copy to it.
When I try copying I get
No such file or directory
Is that default
My file system /usr/ports/net go damaged
I've done fsck -F in single user mode but there are warnings about not
being able to fix this.
The directories below cannot be removed
How do I go about this?
Thanks
/Leslie
total 14
drwxr-xr-x 1 root wheel 512 21 Jul 16:13 ccxstream/
2012-07-21 16:44, Wojciech Puchar skrev:
I've done fsck -F in single user mode but there are warnings about not
being able to fix this.
without the messages from fsck i cannot help you.
there are rare cases when mess gets written to inodes that fsck will not
corrent it and you have to do
2012-07-21 16:59, Wojciech Puchar skrev:
how about fsck_ffs -y / in single user mode?
seems like no clri is needed.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
2012-07-21 17:33, Wojciech Puchar skrev:
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
freebsd-questions-unsubscr...@freebsd.org
It fixed the problem :-)
you may risk putting
fsck_y_enable=YES
in
I have a problem that I do not understand.
At the prompt I give the command startx
I get a message that /usr/local/bin/startxfce4 does not exist.
Copy the file from another system and I get
X server already running on display :0
/usr/local/etc/xdg/xfce4/xinitrc: Can't open
2012-07-21 18:42, Wojciech Puchar skrev:
At the prompt I give the command startx
I get a message that /usr/local/bin/startxfce4 does not exist.
Copy the file from another system and I get
copying files instead of installing packages isn't bright idea, unless
you copy complete /usr/local
True! I copied this file as well and now xfce starts as usual.
/Leslie
Wojciech Puchar woj...@wojtek.tensor.gdynia.pl skrev: Copy the file from
another system and I get
X server already running on display :0
/usr/local/etc/xdg/xfce4/xinitrc: Can't open
/usr/local/etc/xdg/xfce4/xinitrc:
Dale Scott skrev 2012-06-14 14:59:
Should I install the libc souces?
I had this error when upgrading 8.x (8.1 to 8.2?), and solved it by creating
the directory only (actual sources not required). I recall someone had
posted this solution to the list at the time.
Regards,
Dale
When one recives the
FreeBSD Errata Notice or
FreeBSD Security Advisory
The instruction is to do:
# freebsd-update fetch
# freebsd-update install
From earlier discussions on this list about the -px number not
changing, I usually rebuild and install the kernel.
My question is:
Do I
When I do
freebsd-update install
I get this error:
Installing updates...install: ///usr/src/lib/libc/gen/libc_dlopen.c: No
such file or directory
I think it's because I do not have all sources installed. So I just want
to confirm that it's the case.
Also, should I care and install the
2012-06-14 12:18, Matthew Seaman skrev:
On 14/06/2012 10:45, Leslie Jensen wrote:
When I do
freebsd-update install
I get this error:
Installing updates...install: ///usr/src/lib/libc/gen/libc_dlopen.c: No
such file or directory
I think it's because I do not have all sources installed. So
2012-06-04 16:10, Leslie Jensen skrev:
2012-06-04 15:54, Warren Block skrev:
% printf \033];Funny Title\007
Works!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
2012-06-04 14:07, Antonio Olivares skrev:
I now have a similar problem. The icons in the program menu is not
displayed, only a white icon with a red cross.
Uninstalled the complete xfce4 and reinstalled it.
I also nuked the .config directory but icons are gone even so.
I have the 96 DPI
2012-06-03 18:18, Warren Block skrev:
On Sun, 3 Jun 2012, Warren Block wrote:
On Sun, 3 Jun 2012, Leslie Jensen wrote:
2012-06-02 19:18, Doug Barton skrev:
On 6/2/2012 8:09 AM, Leslie Jensen wrote:
I'm thinking about some kind of information on the build progress
Portmaster already
2012-06-04 09:41, Doug Barton skrev:
On 06/04/2012 00:35, Leslie Jensen wrote:
I found that setting and changed it.
That should do it then. Thanks to Warren for suggesting it.
I forgot to tell you that I'm working through an SSH connection and
maybe it's because of that I cannot see any
2012-06-04 10:14, Leslie Jensen skrev:
2012-06-04 09:41, Doug Barton skrev:
On 06/04/2012 00:35, Leslie Jensen wrote:
I found that setting and changed it.
That should do it then. Thanks to Warren for suggesting it.
I forgot to tell you that I'm working through an SSH connection
2012-05-28 06:53, Antonio Olivares skrev:
I copied the username/.config directory to another folder and nuked
it. Then I see the pristine settings. They are almost the same with
the exception of the clock moved to the side like it had been before
but was moved. The fonts are the same :(,
2012-06-04 15:54, Warren Block skrev:
% printf \033];Funny Title\007
Works!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
I'm thinking about some kind of information on the build progress when
one does larger updates like the newly recommendation in
/usr/ports/UPDATING
portmaster -r png-
I myself have three machines with different capacity when it comes to
building ports.
How about a knobb one could choose
2012-06-02 19:18, Doug Barton skrev:
On 6/2/2012 8:09 AM, Leslie Jensen wrote:
I'm thinking about some kind of information on the build progress
Portmaster already has that if you're building in a terminal window,
look in the titlebar. I can take a look at printing that in line if
you're
2012-05-31 19:35, Jens Jahnke skrev:
Hi,
On Fri, 04 May 2012 14:12:17 +0200
Hartmann, O.ohart...@zedat.fu-berlin.de wrote:
HO I found myself incapable of rebuilding/updating editors/libreoffice
HO on ALL FreeBSD 9-STABLE and FreeBSD 10-CURRENT (amd64) platforms
HO with the very same
Antonio Olivares skrev 2012-05-27 15:38:
Dear folks,
I updated ports and consequently updated to xfce4.10. I try to run
terminal and it does not work.
Script started on Sun May 27 08:32:31 2012
[olivares@tricorehome ~]$ termian? ?? ?nal
/libexec/ld-elf.so.1: Shared object libxfce4util.so.5
The following message appears when I do
freebsd-update install
The following files will be added as part of updating to 8.2-RELEASE-p7:
/usr/src/lib/libc/gen/libc_dlopen.c
The following files will be updated as part of updating to 8.2-RELEASE-p7:
/boot/kernel/kernel
/lib/libcrypto.so.6
2012-05-03 19:04, Leslie Jensen skrev:
The following message appears when I do
freebsd-update install
The following files will be added as part of updating to 8.2-RELEASE-p7:
/usr/src/lib/libc/gen/libc_dlopen.c
The following files will be updated as part of updating to 8.2-RELEASE-p7
2012-05-03 20:35, andrew clarke skrev:
On Thu 2012-05-03 19:17:05 UTC+0200, Leslie Jensen (les...@eskk.nu) wrote:
After a reboot my system now has the following label
FreeBSD 8.2-RELEASE-p3 #0
How come it downgrades the label from p6 to p3 when upgrading to p7.
This is a FAQ. There's
2012-04-24 16:01, Warren Block skrev:
On Tue, 24 Apr 2012, Leslie Jensen wrote:
2012-04-23 19:56, Leslie Jensen skrev:
2012-04-23 18:29, Warren Block skrev:
On Mon, 23 Apr 2012, Leslie Jensen wrote:
Use Option
AutoAddDevices Off to disable HAL input device detection
Hello list.
I'm experiencing a lot of lagging after I've upgraded xorg. I use XFCE
and just changing from one desktop to another now feels really slow.
If I click on a button in an application I have to move the mouse
pointer before there's a reaction to the click.
In a terminal window I
2012-04-23 14:13, Polytropon skrev:
On Mon, 23 Apr 2012 13:57:29 +0200, Leslie Jensen wrote:
Hello list.
I'm experiencing a lot of lagging after I've upgraded xorg. I use XFCE
and just changing from one desktop to another now feels really slow.
If I click on a button in an application I
2012-04-23 15:29, Eduardo Morras skrev:
At 13:57 23/04/2012, you wrote:
Hello list.
I'm experiencing a lot of lagging after I've upgraded xorg. I use XFCE
and just changing from one desktop to another now feels really slow.
If I click on a button in an application I have to move the mouse
2012-04-23 18:29, Warren Block skrev:
On Mon, 23 Apr 2012, Leslie Jensen wrote:
Hello list.
I'm experiencing a lot of lagging after I've upgraded xorg. I use XFCE
and just changing from one desktop to another now feels really slow.
If I click on a button in an application I have to move
2012-04-23 19:56, Leslie Jensen skrev:
2012-04-23 18:29, Warren Block skrev:
On Mon, 23 Apr 2012, Leslie Jensen wrote:
Use Option
AutoAddDevices Off to disable HAL input device detection.
___
http://www.wonkity.com/~wblock/docs/html
Hello list.
I run a daily script via cron
@daily rootfreebsd-update cron
Today I got this in my mail which usually means that I have to run
freebsd-update.
Looking up update.FreeBSD.org mirrors... 4 mirrors found.
Fetching metadata signature for
Hi all,
I'm struggling with a speed issue when trying to print stuff from
firefox (10.0.2,1). I've set up cups (meta package 1.5.2) on my box
which uses a Lexmark E360dn printer via ethernet. The printer has a
postscript emulation which is set as the default (as opposed to
PCL). I've used
2012-03-19 08:53, Da Rock skrev:
On 03/19/12 17:49, Polytropon wrote:
On Mon, 19 Mar 2012 08:29:22 +0100, David Demelier wrote:
On 19/03/2012 07:28, Polytropon wrote:
On Sun, 18 Mar 2012 23:05:58 +0100, David Demelier wrote:
Hello,
I try to create a dualboot with Windows 7, I set up
1 - 100 of 312 matches
Mail list logo