Re: Problems with startx on 5.2-RC2

Have you tried removing options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC from your kernel config and recompiled? No, I gave up and returned to 5.1. I will get back to 5.2-RELEASE. Regards, Jarek ___ [EMAIL

Re: Problems with startx on 5.2-RC2

Hi, I am curious if the problem persists if you put the following in your device.hints using the default kernel. hint.acpi.0.disabled=1 Lucio On 0, Martin Brecher [EMAIL PROTECTED] wrote: :Jaroslaw Nozderko wrote: :[...] :Yes, see my post from earlier today called Can't shutdown, logout,

Re: Problems with startx on 5.2-RC2

Jaroslaw Nozderko wrote: [...] However, I managed to work around these freezes by removing the two SMP-related lines from my kernel configuration: options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC Additionally, I am sure ACPI does not have anything to do with

Re: Problems with startx on 5.2-RC2

Hi Martin, ACPI is still activated. Removing those two lines from my kernel configuration solved the problem for me. Have you tried that? This would help nailing the problem down, I guess. BTW, I haven't tried with the geforce again, yet -- still running the i740 (which had the problems,

Re: Problems with startx on 5.2-RC2

Jaroslaw Nozderko wrote: [...] I installed 5.2-RC2 again, added hint.acpi.0.disabled=1 to /boot/device.hints, but then I got this in dmesg after vga0:... unknown: PNP0401 can't assign resources (port) unknown: PNP0501 can't assign resources (port) unknown: PNP0501 can't assign resources (port)

Problems with startx on 5.2-RC2

OS: FreeBSD 5.2-RC2 (MAC - biba,mls) Hi, I have problem with X on 5.2-RC2. Sometimes the whole system hangs when I start X by startx or 'setpmac mls/equal startx' (with MAC policies loaded). In about 30% of attempts it hangs on XFree startup messages and hard reset is required. The problem

Re: Problems with startx on 5.2-RC2

Jaroslaw Nozderko wrote: OS: FreeBSD 5.2-RC2 (MAC - biba,mls) Hi, I have problem with X on 5.2-RC2. Sometimes the whole system hangs when I start X by startx or 'setpmac mls/equal startx' (with MAC policies loaded). In about 30% of attempts it hangs on XFree startup messages and hard reset is

Re: Problems with startx on 5.2-RC2

Trey Sizemore wrote: Jaroslaw Nozderko wrote: OS: FreeBSD 5.2-RC2 (MAC - biba,mls) Hi, I have problem with X on 5.2-RC2. Sometimes the whole system hangs when I start X by startx or 'setpmac mls/equal startx' (with MAC policies loaded). In about 30% of attempts it hangs on XFree startup

Re: Problems with startx on 5.2-RC2

I had another ACPI related problem on my asus (nvidia) a7n8x, and posted to the 'current' mailing list. One of the replies suggested how to disable acpi cleanly: At 09:17 +0200 01/01/2004, Danny Braniss wrote: try adding in file /boot/device.hints: hint.acpi.0.disabled=1 danny That worked - it

Re: Problems with startx on 5.2-RC2

Hi Trey, Yes, see my post from earlier today called Can't shutdown, logout, or restart cleanly. I have not run 5.1-RELEASE before, so I can't say if it didn't happen there, but it definitely happens with 5.2-CURRENT. I'm at my wit's end trying to find out why! thanks, I've read it - I

Re: Problems with startx on 5.2-RC2

Jaroslaw Nozderko wrote: [...] Yes, see my post from earlier today called Can't shutdown, logout, or restart cleanly. [...] thanks, I've read it - I have Asus P3B-F motherboard :)) But seriously, I'm not sure it's hardware-related - I don't remember a single occurence of this problem in 5.1 and

Re: Problems with startx on 5.2-RC2

Hi Martin, I agree: I experienced X11 freezes on 5.2 with both a nvidia card as well as a card using the i740 chipset. The nv freezed the computer as soon as I started X, the i740 happend to freeze it when I killed the X server I also have nvidia - Geforce 256. And for me it also freezed on