On Jun 13, 2005, at 11:28 PM, Chad Leigh -- Shire.Net LLC wrote:
Hi
Tonight I was trying to create a new disk backed /dev/md device to
add some space to a jail for some sa-exim based greylisting tuple
storage.
I create the disk file using dd just fine. I then use
/sbin/mdconfig -a -t
Never mind -- I figured out the problem -- the system recently went
to a securelevel that does not allow disk writing...
At least this thread will be archived for future numbskulls like me
to have as a reference...
Thanks
Chad
On Jun 14, 2005, at 12:25 AM, Chad Leigh -- Shire.Net LLC
Hi,
I seem to have stumbled upon a tiny problem that just will not go
away. I was hoping there would be an answer somewhere before I put my
deep-into-the-dirt-boots on.
The software setup of the problem:
FreeBSD 5.4 Release
ipfw
natd
named
jail
Mysql 4.1 Server
Mysql 4.1 client
Hardware
1
Sorry, a little typo on my part there. compat4x did
solve my problem, BitDefender is up and running and
working just great.
Thanks again,
smiity
--- Adi Pircalabu [EMAIL PROTECTED] wrote:
On Mon, 13 Jun 2005 12:43:04 +0100 (BST)
Ian Smith [EMAIL PROTECTED] wrote:
Thanks Adi, that sorted
hi all... i installed sniff from ports last night to check what its doing
and just noticed that the em0 was put into promisc mode... is that because
of sniff and should i just put it on permanent not promisc
thanks...
___
On 6/14/05, Ev Batey WA6CRE [EMAIL PROTECTED] wrote:
[snipped (every thing)]
The KM400 uses the VIA S3 UniChrome. Try changing the driver section
in the xorg.conf file to the via driver. man via for more info.
Starting with a fresh xorg.conf file might be good idea too, Xorg
-configure. As
Hi ann,
as few/far as I know, you cannot ping from one vlan
to another. thats the clue. you have to free the ports
on the switch to allow trunking.
I used this
http://www.expresshosting.net/howto/VLAN-802.1q-Tagging-in-FreeBSD-For-Rate-Limiting-and-Firewalling.html
howto, and could send vlan
On 6/14/05, Keyser [EMAIL PROTECTED] wrote:
Just tried your code on a freshly installed machine, just standard
install, no updates performed, and I still cannot reproduce the
problem. Your code compiles and runs fine.
--
Dmitry
Yeah, that's what I feared. At this point the only
Hi, i have a problem with an erro of me : i have formated unfortunely my
ufs partition of my server data, how is possible to unformat ufs file
system, i've try easy recovry with raw mode but many files lost , please
anybody can help me or my data as lost?
Oops, I missed something. maybe no one will notice. Whats that one
quote from the movie office space when bolton says he always fscking
up the small details?
___
freebsd-questions@freebsd.org mailing list
On Tuesday 14 June 2005 03:21, Eric Schuele wrote:
Ben,
Here's a link (back to the archives) that helped me out (firefox
flash)...
http://www.freebsd.org/cgi/getmsg.cgi?fetch=1302736+0+/usr/local/www/db/tex
t/2005/freebsd-stable/20050306.freebsd-stable
HTH.
Very much! linuxpluginwrapper
On 6/14/05, snoopy [EMAIL PROTECTED] wrote:
Hi, i have a problem with an erro of me : i have formated unfortunely my
ufs partition of my server data, how is possible to unformat ufs file
system, i've try easy recovry with raw mode but many files lost , please
anybody can help me or my data as
Hi everyone.
Here is my problem. I want to use grub to boot freebsd, I wrote the following
lines in grub.conf:
title FreeBSD 5.3
root (hd0,0,a)
kernel /boot/loader
But grub warns me: filesystem unknown, cannot mount selected partition
Can somebody tell me what is wrong and how to setup?
Thanks.
On Tue, 14 Jun 2005 09:10:49 +0100 (BST)
Ian Smith [EMAIL PROTECTED] wrote:
Sorry, a little typo on my part there. compat4x did
solve my problem, BitDefender is up and running and
working just great.
Good,
You could also use /etc/libmap.conf to solve libm.so.2 dependency. For
example, adding
On Mon, Jun 13, 2005 at 04:23:59PM -0700, ann kok wrote:
ifconfig vlan0 192.168.1.2 netmask 255.255.255.252
ifconfig vlan1 192.168.1.6 netmask 255.255.255.252
255.255.255.255 ??? Obviously it won't be able to see any other
addresses
--
Chris.
On Tue, Jun 14, 2005 at 11:18:35AM +0200, Chris Knipe wrote:
On Mon, Jun 13, 2005 at 04:23:59PM -0700, ann kok wrote:
ifconfig vlan0 192.168.1.2 netmask 255.255.255.252
ifconfig vlan1 192.168.1.6 netmask 255.255.255.252
255.255.255.255 ??? Obviously it won't be able to see any other
Damian Sobieralski wrote:
I added the following to my tape drive area in the bacula-sd-conf:
Minimum Block Size = 64512
Maximum Block Size = 64512
I'm not seeing those errors any longer. I've restored and all seems
to go well.
Good stuff! Did that number come out of your tape drive
Hi,
We're looking at buying one of these little machines for a rather large company.
However, we don't know if FreeBSD supports it, as it says that it only supports
the
V20z...
So, we're interested to know if FreeBSD supports the V40z sun machines...
If anyone else can match something with
This is probably a dumb question, but I will ask it anyway.
I have 'mysql' installed. From what I have deduced from the documentation,
I should start it using 'mysqld_safe'. I am assuming that I would use the
syntax 'mysqld_safe ' to force the program into the background upon
starting. What I
Gerard Seibert wrote:
This is probably a dumb question, but I will ask it anyway.
I have 'mysql' installed. From what I have deduced from the
documentation, I should start it using 'mysqld_safe'. I am assuming that
I would use the syntax 'mysqld_safe ' to force the program into the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Gerard Seibert wrote:
This is probably a dumb question, but I will ask it anyway.
I have 'mysql' installed. From what I have deduced from the
documentation, I should start it using 'mysqld_safe'. I am assuming
that I would use the syntax
Hi,
For some reason my machine keeps crashing almost every night at around
3:00am with the following test in the messages log file:
Jun 14 03:02:28 taco kernel: pid 7174 (sh), uid 0: exited on signal 11
(core dumped)
I tracked it down to cvsup. I run it every night at 3:00am, the
following is
Hi, i have a problem with an erro of me : i have formated unfortunely my
ufs partition of my server data, how is possible to unformat ufs file
system, i've try easy recovry with raw mode but many files lost , please
anybody can help me or my data as lost?
What do you mean by format? Did
Dear Sir,
I have PPPDial-In Server communication problem. Can you give me an guideline
where I missed or doing wrong ?
Linux Ver. : Read Hat (rel.11) Fedora Linux 2
Client Pc Operating System: XP Professional
SERVER IP ADDRESS
On 2005-06-13 22:06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
http://people.freebsd.org/~delphij/vesa/patchset-highres.20050522
Has this patch beeen applied to CURRENT? So it will be in the next
release of FreeBSD?
Yes.
___
On Tuesday 14 June 2005 01:46, the author Ben Paley contributed to the
dialogue on-
Re: Flash plugin:
On Tuesday 14 June 2005 03:21, Eric Schuele wrote:
Ben,
Here's a link (back to the archives) that helped me out (firefox
flash)...
Chris [EMAIL PROTECTED] writes:
Even more info -
/home/moo thunderbird
The program 'Gecko' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadValue (integer parameter out of range for operation)'.
(Details: serial 11327 error_code 2
I realize this question is probably best served by the sendmail mailing list,
but whereas I've added the Spam Assassin filter, I'm hoping to find a larger
community here that is running FreeBSD + sendmail + SpamAssassin who
have handled this, so I don't have to ask the question in 3 places :)
The
Please don't top-post.
[EMAIL PROTECTED] wrote:
Hi,
What is shown in the logs? Why the connection failed?
Show the passwd entry for that user, or any other info the help
us.
- Marcelo Souza
Kövesdán Gábor [EMAIL PROTECTED] writes:
Hi,
The password entry:
On Mon, 13 Jun 2005, Alex Zbyslaw wrote:
Philip Hallstrom wrote:
I have a system that we are running in production that there was an
oversight on, and it has a single hard drive installed (32GB SCSI I
believe), rather than a 3 drive raid5 array. We would like to correct
this, but we have
In this case it works.
Lowell Gilbert wrote:
What happens if testuser is assigned the default login class? Does
the login still fail? [If so, it has nothing to do with your login
settings.]
___
freebsd-questions@freebsd.org mailing list
I think it used to be the case that if you used kdm to login,
then .bash_profile would not get sourced by bash (because it's not a login
shell). However it appears that the Xsession script
in /usr/local/share/config/kdm now sources .bash_profile explicitly if bash
is your shell.
My problem
On 13. jun. 2005, at 10.29, Marko uk wrote:
I have same hardware as before, when 5.3 was installed, except the
installation is new, 5.4. I have NFS mounted and some FTP app is
using it extensively and server crashes once / day.
How much memory do you have on the server? You may want to
Please don't top-post.
Kövesdán Gábor [EMAIL PROTECTED] writes:
Hello,
I've done a new class shuser with some limits, rebuild the cap
database and made a new user tester with adduser. When it asked for
the login class, I specified shuser, and tried to login with ssh, but
it failed. My
George Hartzell [EMAIL PROTECTED] writes:
I just noticed that I couldn't ssh -X from a machine into a fully
configured jail on the same machine and have an X app display back on
the desktop.
I think that this used to work, but I can't swear to it.
I've been playing around, and now have
Ok, Ok.
I think everybody gets it, now.
FreeBSD Yay!
Microsoft Boo.
FreeBSD users are the most helpful EVER, with never a bad word uttered.
Microsoft users are bad people whose feet stink and they might not love jesus.
Now, please move on.
On Tuesday 14 June 2005 06:46, John McAree wrote:
On 6/14/05, Lane [EMAIL PROTECTED] wrote:
Ok, Ok.
I think everybody gets it, now.
FreeBSD Yay!
Microsoft Boo.
FreeBSD users are the most helpful EVER, with never a bad word uttered.
Microsoft users are bad people whose feet stink and they might not love jesus.
Now, please move
Yuri [EMAIL PROTECTED] writes:
What is the way to use webcam under FreeBSD ?
Under Linux there are many drivers supporting many webcams exposing
them as device with some standardised access.
Under Windows there's whole driver infrastructure of camera devices.
What's in FreeBSD ? I
kalin mintchev [EMAIL PROTECTED] writes:
hi all... i installed sniff from ports last night to check what its doing
and just noticed that the em0 was put into promisc mode... is that because
of sniff and should i just put it on permanent not promisc
I'm not quite sure what you are asking,
Lowell Gilbert wrote:
Okay, so it is the login settings.
I'm a little suspicious of commenting out the lines in the middle of
the settings. I think that may comment out the continuation
character, ending the setting at that point. Try moving those lines
out of the way and rebuild the
On 6/10/05, Chris Dionissopoulos [EMAIL PROTECTED] wrote:
...
Try to create a new kernel with timing at 1000hz and if
your hardware (nic) is supported enable device polling
(polling(4)).
...
Hi Chris,
i've put polling up in my kernel with timing at 2000hz and
kern.polling.burst_max=400, that
windlamf [EMAIL PROTECTED] writes:
Hi everyone.
Here is my problem. I want to use grub to boot freebsd, I wrote the following
lines in grub.conf:
title FreeBSD 5.3
root (hd0,0,a)
kernel /boot/loader
But grub warns me: filesystem unknown, cannot mount selected partition
Can somebody
On Tuesday 14 June 2005 09:27 am, Lowell Gilbert wrote:
Yuri [EMAIL PROTECTED] writes:
What is the way to use webcam under FreeBSD ?
Under Linux there are many drivers supporting many webcams exposing
them as device with some standardised access.
Under Windows there's whole driver
Hi,
I'm having a difficulty getting PostgreSQL to accept TCP/IP connections on
FreeBSD 5.3. I have edited 'postgresql.conf' in my postgres data directory
to set the listen_address (and uncommented it) and have the port line
uncommented and set to the default 5432. I then restarted the postmaster
On Monday 13 June 2005 16:20, Juan Palacios wrote:
bought LINSPIRE and it installed everything except
modem, tried over 3 modems and NOTHING.
Most cheap modems are winmodems. These are modems that offload a lot of the
signal processing from hardware into drivers. The drivers are typically
Hello,
I have just installed FreeBSD 5.4-RELEASE (my first use of FreeBSD)
onto a Dell Inspiron 5000e laptop, dual booting with Windows. However,
now I would like to install a Linux distro to see if the ACPI support
is any different and so on. I have plenty of space on the FreeBSD
slice, so is
On Tue, 2005-06-14 at 10:05 -0500, Joseph Koenig (jWeb) wrote:
Hi,
I'm having a difficulty getting PostgreSQL to accept TCP/IP connections on
FreeBSD 5.3. I have edited 'postgresql.conf' in my postgres data directory
to set the listen_address (and uncommented it) and have the port line
Hi,
Anyone got an idea why any of these commands w who finger do not show
who is logged in. I am logged in as a super user and shows no one logged in.
The commands used to work few days ago now nothing. Thanks for the help.
VJ
___
Hi,
I'm having a difficulty getting PostgreSQL to accept TCP/IP connections on
FreeBSD 5.3. I have edited 'postgresql.conf' in my postgres data directory
to set the listen_address (and uncommented it) and have the port line
uncommented and set to the default 5432. I then restarted the
--On Monday, June 13, 2005 22:16:38 -0700 Kan Cai [EMAIL PROTECTED] wrote:
Hi, Paul:
Thanks for the reply, but it didn't work. I tried 3 keyboards and 2
FreeBSD releases (5.2.1, and 5.3R1). The combination of logitech keyboard
with 5.2.1 does highlight the keymap option in sysinstall menu,
Hello,
I'm running a 5.4 box and trying to get gmirror going. I'm following the
howto at:
http://people.freebsd.org/~rse/mirror/
I'm following procedure1 as i want to mirror the entire
drive.
My situation, i have two identical 80 gb IDE drives, ad0 and ad1, when i try
to edit the disk label,
I have a FreeBSD box with three Nic's; what I would like to do is mimic the
functionality of a mirror-port commonly found on switches.
On a routing firewall I would like traffic from say sk0 destined to sk1 and
vice versa to be mirrored on xl0 for purposes of network management.
I am pretty
For some problems with my last installation i decide to install again the
system, freebsd 5.4 Release,
make the cvsup to update my tree, compile my kernel to add my sound card and
other things, install my ports and them upgrade my ports:
test$ cd /usr/ports
test$ make update
The system update
Nickolas,
I TRIED THAT .. first with vga in the device sections, then vesa, via,
savage, sis and finally back to vga .. ONLY vga DID NOT produce an immediate
EXIT -- stating NO SCREEN FOUND ... so NOW WHAT ???
# The Driver line must be present. When using run-time loadable driver
# modules,
For the original message poster: Depending on what you want to do, you
can use a digital camera with an AV out port and a TV tuner card to
show the image in fxtv and gnome-meeting. I wouldn't know how to
stream the image to a web page; but gnome-meeting accepted the TV tuner
card as an
When I create a new user on our freeBSD firewall (VIPW e.g.
johanv:*:4032:1000:Johan Venter:/nonexistent:/sbin/nologin) I get an error
message user and or login invalid for the domain when I dial into the
system. The user in the above example does not give any problems with
dialup.
Regards
Johan
* David Banning ([EMAIL PROTECTED]) wrote:
I seem to have a lot of memory being eaten by httpd (part output of top);
Any ideas to have httpd timeout sooner to preserve memory?
MaxRequestsPerChild is there to cope with leaks, it won't help if Apache
is using a lot of memory to start with
I'm looking for a blade server that will work with FreeBSD 5.x. Is anyone
successfully using one?
I would appreciate hearing about it.
TIA
Elliot
___
freebsd-questions@freebsd.org mailing list
On Tue, 2005-06-14 at 10:05 -0500, Joseph Koenig (jWeb) wrote:
Hi,
I'm having a difficulty getting PostgreSQL to accept TCP/IP connections on
FreeBSD 5.3. I have edited 'postgresql.conf' in my postgres data directory
to set the listen_address (and uncommented it) and have the port line
Hello,
Not sure if this is the place to ask this. But this is a
freebsd question.
I've been running FreeBSD since about 4.6. I have 2
machines running FreeBSD. One is used as a router, its an SMP
machine, and the other is used to build the source code.
I'm having a problem
I had a 4gig drive laying around that I wanted to use for a router, so I
installed the latest (from about 1.5 weeks ago) from the 5.x distrubutions.
I added ipfw/natd/dummynet to the kernel file and did a full buildworld,
buildkernel. I rebooted after install kernel, everything seemed normal,
Hi all
Thank you for your help and info
the url is useful and same as what I did
Any help is much appreciated:
I used the tcpdump in the freebsd box
the freebox 192.168.1.6 is receiving the linux box
192.168.1.5
but why they can't ping each other!
in freebsd box. ping 192.168.1.5
PING
Hello,
I have just installed FreeBSD 5.4-RELEASE (my first use of FreeBSD)
onto a Dell Inspiron 5000e laptop, dual booting with Windows. However,
now I would like to install a Linux distro to see if the ACPI support
is any different and so on. I have plenty of space on the FreeBSD
slice,
Lowell Gilbert writes:
George Hartzell [EMAIL PROTECTED] writes:
I just noticed that I couldn't ssh -X from a machine into a fully
configured jail on the same machine and have an X app display back on
the desktop.
[...]
You're going to have problems with ssh authentication
i've written an rcNG script but i'm having some issues. i've read all
of the documentation and searched in the mailing lists and didn't find
anything about writting custom rcNG scripts. i've built apache2 and
PHP5 from source (not from ports) so i had to write my own script to
start httpd at
run the hard drive diagnostics software of your hard drive manufacturer
to test the condition of your hard drive. it should be available from
their website. this should always be done on used drives being put back
into service.
--
John Brooks
[EMAIL PROTECTED]
-Original Message-
From:
uname -a:
FreeBSD vox.chthonixia.net 5.4-STABLE FreeBSD 5.4-STABLE #0: Thu Jun
9 13:59:19 EDT 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/VOX i386
Today, I was thinking of upgrading my sources, to see if the new
Hi-Res console modes were available yet. I didn't see them in the
update, but I did
Alex Zbyslaw wrote:
Damian Sobieralski wrote:
I added the following to my tape drive area in the bacula-sd-conf:
Minimum Block Size = 64512
Maximum Block Size = 64512
I'm not seeing those errors any longer. I've restored and all seems
to go well.
Good stuff! Did that number come out of
On Jun 14, 2005, at 8:48 AM, Wojciech Puchar wrote:
think twice before making RAID-5 array. are you sure small writes
will not be too common?
No, you are on to something - I will be making small writes / parity
calculations. This is going to be a web server but it is for clients
and
George Hartzell writes about ssh -Y:
Using ssh -X works on my 5.3BETA4 system from 10/2004. It's running
an Xorg 6.7 server.
Is this the result of an X change, and ssh change, or a butterfly
flapping it's wings over Brazil?
It's an SSH change, and came in around OpenSSH 3.8.
I certainly
Ted Wisniewski [EMAIL PROTECTED] writes:
I have a FreeBSD box with three Nic's; what I would like to do is mimic the
functionality of a mirror-port commonly found on switches.
On a routing firewall I would like traffic from say sk0 destined to sk1 and
vice versa to be mirrored on xl0 for
On Jun 14, 2005, at 10:21 AM, Lane wrote:
Ok, Ok.
I think everybody gets it, now.
FreeBSD Yay!
Microsoft Boo.
FreeBSD users are the most helpful EVER, with never a bad word uttered.
Microsoft users are bad people whose feet stink and they might not
love jesus.
Now, please move on.
Hi again. I want to set up an FTP server that does *not* pay
attention to the FreeBSD login user database. That is, I want the
server to look in some database (probably text file) that I create
that has usernames and passwords. I'm not worried about file
permissions, assuming that the FTP
On Sun, Jun 12, 2005 at 10:39:10PM -0600, Danny MacMillan wrote:
Hello,
Every time I read an email that has a line in the message body that
starts with the word From, the line is quoted with a character.
It is my understanding that this is done necessarily when email is
stored in the
On Jun 14, 2005, at 2:17 PM, Danny MacMillan wrote:
On Sun, Jun 12, 2005 at 10:39:10PM -0600, Danny MacMillan wrote:
Hello,
Every time I read an email that has a line in the message body that
starts with the word From, the line is quoted with a character.
It is my understanding that this
On Tuesday 14 June 2005 12:07, JM wrote:
i've written an rcNG script but i'm having some issues.
Step one: set rc_debug=YES in /etc/rc.conf to see what's actually
happening when you attempt to run your script. That seems to uncover about
95% of the problems I've had.
--
Kirk Strauser
On Tue, Jun 14, 2005 at 02:28:45PM -0400, Bart Silverstrim wrote:
On Jun 14, 2005, at 2:17 PM, Danny MacMillan wrote:
It turns out that when I send the same email both to freebsd-test@
and directly to the account I have subscribed to that list, the
mail delivered via the list has the From
On 6/14/05, Everett Batey [EMAIL PROTECTED] wrote:
Nickolas,
I TRIED THAT .. first with vga in the device sections, then vesa, via,
savage, sis and finally back to vga .. ONLY vga DID NOT produce an immediate
EXIT -- stating NO SCREEN FOUND ... so NOW WHAT ???
What's the securelevel on the
On Tue, Jun 14, 2005 at 10:05:05AM -0500, Joseph Koenig (jWeb) wrote:
Hi,
I'm having a difficulty getting PostgreSQL to accept TCP/IP connections on
FreeBSD 5.3. I have edited 'postgresql.conf' in my postgres data directory
to set the listen_address (and uncommented it) and have the port
Hi,
I just got a new Tyan S5350 using twin Xeon processors I am told this is now a
very standard motherboard.
Unfortunately when I try to boot FreeBSD 5.4 Release I get the following
errors on the IDE/ATA/SATA connection.
The errors I get during boot up are as follows:
The hard disk is not
Moving things like mod_php and mod_perl stuff to FastCGI avoids each
httpd having a copy of the interpreter and its various data structures
each, and segments the memory of the interpreters outside httpd so it's
easier to see what's using the memory; you'll have fewer copies running
too,
On Jun 14, 2005, at 3:15 PM, Danny MacMillan wrote:
On Tue, Jun 14, 2005 at 02:28:45PM -0400, Bart Silverstrim wrote:
On Jun 14, 2005, at 2:17 PM, Danny MacMillan wrote:
It turns out that when I send the same email both to freebsd-test@
and directly to the account I have subscribed to that
On 6/14/05, Joe [EMAIL PROTECTED] wrote:
Hello,
Not sure if this is the place to ask this. But this is a
freebsd question.
I've been running FreeBSD since about 4.6. I have 2
machines running FreeBSD. One is used as a router, its an SMP
machine, and the other is used to build
Kirk Strauser wrote:
On Tuesday 14 June 2005 12:07, JM wrote:
i've written an rcNG script but i'm having some issues.
Step one: set rc_debug=YES in /etc/rc.conf to see what's actually
happening when you attempt to run your script. That seems to uncover about
95% of the problems
On 6/14/05, Richard Lupton [EMAIL PROTECTED] wrote:
Hello,
I have just installed FreeBSD 5.4-RELEASE (my first use of FreeBSD)
onto a Dell Inspiron 5000e laptop, dual booting with Windows. However,
now I would like to install a Linux distro to see if the ACPI support
is any different and so
On Jun 14, 2005, at 1:39 PM, JM wrote:
Kirk Strauser wrote:
On Tuesday 14 June 2005 12:07, JM wrote:
i've written an rcNG script but i'm having some issues.
Step one: set rc_debug=YES in /etc/rc.conf to see what's
actually happening when you attempt to run your script. That
I haven't tried 5.4 yet. To build a 5.4 could take a couple of
days on these old machines.
Joe
--- Dmitry Mityugov [EMAIL PROTECTED] wrote:
On 6/14/05, Joe [EMAIL PROTECTED] wrote:
Hello,
Not sure if this is the place to ask this. But this is
a
freebsd question.
I've
On Jun 14, 2005, at 11:51 AM, D. Goss wrote:
On Jun 14, 2005, at 8:48 AM, Wojciech Puchar wrote:
think twice before making RAID-5 array. are you sure small writes
will not be too common?
No, you are on to something - I will be making small writes /
parity calculations. This is
On Tue, Jun 14, 2005 at 10:05:05AM -0500, Joseph Koenig (jWeb) wrote:
Hi,
I'm having a difficulty getting PostgreSQL to accept TCP/IP connections on
FreeBSD 5.3. I have edited 'postgresql.conf' in my postgres data directory
to set the listen_address (and uncommented it) and have the port
This is a function of the receiving MTA. mbox format inserts a line
at the beginning of each email in the form of:
From [EMAIL PROTECTED] date
This serves as a message delimiter inside the flat text file format
of mbox. Your POP3 mail server needs these lines. Anyway, any time
another line
On Tuesday 14 June 2005 03:14 pm, Joseph Koenig (jWeb) wrote:
On Tue, Jun 14, 2005 at 10:05:05AM -0500, Joseph Koenig (jWeb)
wrote:
Hi,
I'm having a difficulty getting PostgreSQL to accept TCP/IP
connections on FreeBSD 5.3. I have edited 'postgresql.conf' in my
postgres data directory
Hi,
How could I afford that i can get always access to my remote server even
in the case of a breakin by some script kiddie/hack? I thought about
setting a key in ssh so i can log using it even the root password is
changed, but this is simple to stop and it's not good to assume lack of
knowledge
Hello everyone,
I've been experiencing some issues with FreeBSD + MySQL and I was
hoping someone on this list might have some advice.
I have two servers that run a web site that receives about 650,000
hits per day (about 15,000 unique visits/day). Both the machines
have dual Xeon 3.06
On Tuesday 14 June 2005 03:14 pm, Joseph Koenig (jWeb) wrote:
On Tue, Jun 14, 2005 at 10:05:05AM -0500, Joseph Koenig (jWeb)
wrote:
Hi,
I'm having a difficulty getting PostgreSQL to accept TCP/IP
connections on FreeBSD 5.3. I have edited 'postgresql.conf' in my
postgres data directory to
On Jun 14, 2005, at 4:46 PM, Joseph Koenig (jWeb) wrote:
I'm guessing that opening the port is part of what placing
postgresql_enable=YES in the rc.conf file does, correct? If so,
that's
probably the problem as I have not rebooted since adding that. Is
there a
way to safely force that to
in message [EMAIL PROTECTED], wrote
Richard Lupton thusly...
I have just installed FreeBSD 5.4-RELEASE (my first use of
FreeBSD) onto a Dell Inspiron 5000e laptop, dual booting with
Windows. However, now I would like to install a Linux distro to
see if the ACPI support is any different and so
Vinicius Pavanelli Vianna wrote:
How could I afford that i can get always access to my remote server even
in the case of a breakin by some script kiddie/hack? I thought about
setting a key in ssh so i can log using it even the root password is
changed, but this is simple to stop and it's not
I suddenly find myself in need of a wireless card for a 5.3 desktop box.
Anyone want to recommend something?
Thanks,
mike
--
Mike Meyer [EMAIL PROTECTED] http://www.mired.org/consulting.html
Independent Network/Unix/Perforce consultant, email for more information.
Thanks, Paul. What you meant is that I should choose option 7 when the
beastie menu pops up, right? I am not sure which FreeBSD release could do
that. In my 5.2.1 and 5.3R1, the option 7 is reboot. Is that in 5.4?
thanks a lot,
--ken
On 6/14/05, Paul Schmehl [EMAIL PROTECTED] wrote:
--On
On Tuesday, 14 June 2005 at 5:53:58 -0700, J T wrote:
Hi,
For some reason my machine keeps crashing almost every night at around
3:00am with the following test in the messages log file:
Jun 14 03:02:28 taco kernel: pid 7174 (sh), uid 0: exited on signal 11
(core dumped)
...
I decided
1 - 100 of 140 matches
Mail list logo
