Am Donnerstag, den 10.04.2008, 22:50 +0200 schrieb Toni Schmidbauer:
At Thu, 10 Apr 2008 21:22:42 +0200,
Norman Maurer wrote:
All is fine till I reboot. The pool is just disappearing :-/
have you tried to import the pool?
zpool import x1
or just
zpool import
to list pools
Hello,
When installing bind9 9.3.4.1 from ports, I get the following error.
[Updating the pkgdb format:bdb_btree in /var/db/pkg ... - 60 packages
found (-0 +1) . done]
[Gathering depends for dns/bind9 done]
--- Installing 'bind9-9.3.4.1' from a port (dns/bind9)
--- Building
Norman Maurer wrote:
If I run zpool import x1 it works. But as you say it should do it by its
own. Maybe it whould be the best to open a bugreport ?
Do you have zfs_enabled=YES in rc.conf ? If you upgraded FreeBSD from
an earlier release, remember to run mergemaster.
signature.asc
exactly this! thank you very much!
On Thu, 10 Apr 2008, Mario Lobo wrote:
On Thursday 10 April 2008 10:02:55 Wojciech Puchar wrote:
ifconfig: BRDGADD tap0: Invalid argument
I had this problem once because my kernel was out of sync with userland.
When I recompiled world, the problem went
Forget it. I tried one more time and all went well. Sorry to have bothered!
Zbigniew Szalbot
Original Message
Subject: Bind from ports
Date: Fri, 11 Apr 2008 10:20:16 +0200
From: Zbigniew Szalbot [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Hello,
When installing
AOA
I m new FreeBSD 7. And i m trying to install Apache 22 on FreeBSD but
not
able to install how would i do this. Please help me in this regard.
--
Thanks
Farooq Hussain
Try the ports system
#cd /usr/ports/www/apache22 make install clean
Also try to read some good guides from here
Every time I start up Apache (1.3.41) on my 6.3 system I get lots of
warnings in httpd-error.log about duplicate definitions of constants
and functions. The timestamps suggest that this only started happening
after I ran portupgrade on 23rd March. I can run portupgrade again
tonight to see if
AOA
I m new FreeBSD 7. And i m trying to install Apache 22 on FreeBSD but not
able to install how would i do this. Please help me in this regard.
--
Thanks
Farooq Hussain
___
freebsd-questions@freebsd.org mailing list
Hi Mario,
1) # rc.conf
ifconfig_re0=up polling - no IP here !
autobridge_interfaces=bridge0
autobridge_bridge0=tap0 re0 - important even if tap0 does not exist yet
cloned_interfaces=bridge0
# the bridge gets the IP
At Fri, 11 Apr 2008 09:12:55 +0200,
Norman Maurer wrote:
Am Donnerstag, den 10.04.2008, 22:50 +0200 schrieb Toni Schmidbauer:
If I run zpool import x1 it works. But as you say it should do it by its
own. Maybe it whould be the best to open a bugreport ?
i had problems importing a zpool when
On Friday 11 April 2008 05:36:16 Wojciech Puchar wrote:
exactly this! thank you very much!
On Thu, 10 Apr 2008, Mario Lobo wrote:
On Thursday 10 April 2008 10:02:55 Wojciech Puchar wrote:
ifconfig: BRDGADD tap0: Invalid argument
I had this problem once because my kernel was out of sync
On Friday 11 April 2008 07:17:21 you wrote:
Hi Mario,
1) # rc.conf
ifconfig_re0=up polling - no IP here !
autobridge_interfaces=bridge0
autobridge_bridge0=tap0 re0 - important even if tap0 does not
exist yet
Hi Team
I'm unbale to install nss_ldap from padl. I've error :
= nss_ldap-257.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
= Attempting to fetch from http://www.padl.com/download/.
fetch: http://www.padl.com/download/nss_ldap-257.tar.gz: size mismatch:
expected 229242, actual
On Friday 11 April 2008 12:52:56 Mike Clarke wrote:
Every time I start up Apache (1.3.41) on my 6.3 system I get lots of
warnings in httpd-error.log about duplicate definitions of constants
and functions. The timestamps suggest that this only started happening
after I ran portupgrade on 23rd
On Friday 11 April 2008, Mel wrote:
On Friday 11 April 2008 12:52:56 Mike Clarke wrote:
Every time I start up Apache (1.3.41) on my 6.3 system I get lots
of warnings in httpd-error.log about duplicate definitions of
constants and functions.
[snip]
So...
How did you get php4 and php5 to
Hi all,
is it normal that I can't do a 'zfs list' ( for example ) as non-root
user ?
$ zfs list
internal error: failed to initialize ZFS library
I think there is really a use case for use some zfs commands as non-root
user..
Thx
Norman
___
On Thursday 10 April 2008 16:51:03 Barry Walker wrote:
Hi all.
I'm not sure if this is the proper place for this posting, but I am trying
to determine what is causing my KDE problems.
Here's what I get
u85 50 ps -ef |grep kde
bjwalker 11622 11076 0 17:45 pts/200:00:00 grep kde
On Wed, 2008-04-09 at 13:39 -0400, Philip M. Gollucci wrote:
Hi All,
Does anybody have any comments, suggestion, feedback, compatability
The DRAC5 is an abomination to professional computer operators
everywhere. It runs Linux, and to use the remote VGA console or remote
Virtual Media, you
On Fri, 11 Apr 2008, [EMAIL PROTECTED] wrote:
I'm unbale to install nss_ldap from padl. I've error :
= nss_ldap-257.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
= Attempting to fetch from http://www.padl.com/download/.
fetch: http://www.padl.com/download/nss_ldap-257.tar.gz: size
On Friday 11 April 2008 16:03, Konrad Heuer wrote:
On Fri, 11 Apr 2008, [EMAIL PROTECTED] wrote:
fetch: http://www.padl.com/download/nss_ldap-257.tar.gz: size mismatch:
expected 229242, actual 229299
Anyone, can tell me, how to install openldap client on Freebsd 7-Stable ?
I do
--On Friday, April 11, 2008 16:03:24 +0200 Konrad Heuer [EMAIL PROTECTED]
wrote:
On Fri, 11 Apr 2008, [EMAIL PROTECTED] wrote:
I'm unbale to install nss_ldap from padl. I've error :
= nss_ldap-257.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
= Attempting to fetch from
Hello,
I was trying to find a way to list all the packages on my system and I came
across this little article and accordingly issued the command *pkg_info |
grep 'package name' *and I saw the following on the screen instead:
pkg_info: the package info for package 'Terminal-0.2.8' is corrupt
On Fri, 2008-04-11 at 00:35 +0200, Mel wrote:
It translates to be verbose about restoring factory settings, because
without arguments it will restore the built-in set.
Why does factory settings not include scanning the built-in system
library path /usr/lib? From the man page, it would seem
Hi Paul
Thanks you for your reply.
I updated all ports with csup, and now is good for nss_pam package.
I see on Freebsd gnat report same problem :
http://www.freebsd.org/cgi/query-pr.cgi?pr=117886
Best Regards, thanks you for all help
Karim Bourenane
Orange Business Services / Equant
ROSI /
Aijaz Baig skrev:
Hello,
I was trying to find a way to list all the packages on my system and I came
across this little article and accordingly issued the command *pkg_info |
grep 'package name' *and I saw the following on the screen instead:
pkg_info: the package info for package
Sorry for Ubuntu mistake :-)
I love Ubuntu too but I love FREBSD more :-))
Can I use FREEBSD logos and banners, please?
All the best from Bucharest
and congratulations for your exceptional job
Alex
___
freebsd-questions@freebsd.org mailing list
Hi
My name is Alex and I am from Romania, Bucharest and I love FREEBSD
My personal web site is www.alexshop.ro.
I have on my web site a download link for FREEBSD 7.
I hope it is OK with you.
I want for future to offer, for free, CD with FREEBSD.
So, can I use Ubuntu logos and banners, please?
All
I would like to setup my USB flash drive to have special permissions
when I plug it into my desktop. Specifically, I would like it to be
owned by my user so I can user mount the msdos fs on it. I added an
entry to /etc/devfs.conf for the device it was creating, but the
permissions did not get
On Fri, Apr 11, 2008 at 04:32:32PM +0200, Aijaz Baig wrote:
I was trying to find a way to list all the packages on my
system and I came across this little article and accordingly
issued the command *pkg_info | grep 'package name' *and I saw
the following on the screen instead:
pkg_info: the
Hi...
After installing FreeBSD 7.0 Release i found the kdm login promt to be tiny,
so much so i cant actually make out the text at all.
I have since been in kcontrol as su and put the font sizes all the why upto
48, this has only made a marginal difference ( i can now only just make out
what
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
How to get the best results from FreeBSD questions.
===
Last update $Date: 2005/08/10 02:21:44 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
On Fri, Apr 11, 2008 at 09:36:40AM -0700, Loren M. Lang wrote:
I would like to setup my USB flash drive to have special permissions
when I plug it into my desktop. Specifically, I would like it to be
owned by my user so I can user mount the msdos fs on it. I added an
To mount as a normal
I've got a very plain and standard sendmail configuration running on a
machine as a primary mail exchanger. After years of running without any
kind of automated spam filtering, it's just gotten too poor and I have
to turn to rejecting mail.
I installed the spamassassin and new-amavisd port, set
On Fri, Apr 11, 2008, at 15:13:16 +0200, Norman Maurer wrote:
Hi all,
is it normal that I can't do a 'zfs list' ( for example ) as non-root
user ?
$ zfs list
internal error: failed to initialize ZFS library
I think there is really a use case for use some zfs commands as
non-root
On Friday 11 April 2008 18:28:31 Andrew Pantyukhin wrote:
On Fri, Apr 11, 2008 at 04:32:32PM +0200, Aijaz Baig wrote:
I was trying to find a way to list all the packages on my
system and I came across this little article and accordingly
issued the command *pkg_info | grep 'package name'
On Friday 11 April 2008 16:42:57 Shelby Cain wrote:
On Fri, 2008-04-11 at 00:35 +0200, Mel wrote:
It translates to be verbose about restoring factory settings, because
without arguments it will restore the built-in set.
Why does factory settings not include scanning the built-in system
If I run zpool import x1 it works. But as you say it should do it by its
own. Maybe it whould be the best to open a bugreport ?
In addition to what has already been mentioned by Ivan Voras, make sure
your /boot is not the subject to strangeness. Specifically, imported pools
are kept track of
Is there some regular interval at which new ports are processed by the
FreeBSD team? I submitted a port (for a very minor utility) 3/20/2008
but it is still not in the tree. I'm not complaining in the slightest -
the folks who do this work are volunteering their time, and I get/respect
that.
At 12:12 PM 4/11/2008, Eric Melville wrote:
I've got a very plain and standard sendmail configuration running on a
machine as a primary mail exchanger. After years of running without any
kind of automated spam filtering, it's just gotten too poor and I have
to turn to rejecting mail.
I
On Fri, 11 Apr 2008 19:30:25 +0200, Roland Smith [EMAIL PROTECTED] wrote:
For setting permissions on hotpluggable device nodes, you need to look
at devfs.rules. See
http://www.xs4all.nl/~rsmith/freebsd/index.html#hotplug
Excellent stuff :)
I catted the pipe of devd and saw my device attach
Hiya.
I have a media changer:
install# grep ch0 /var/run/dmesg.boot
ch0 at isp0 bus 0 target 0 lun 1
ch0: HP MSL G3 Series 6.00 Removable Changer SCSI-5 device
ch0: 400.000MB/s transfers
ch0: Command Queueing Enabled
ch0: 48 slots, 2 drives, 1 picker, 0 portals
I can read status
I've got an 7.0 amd64 system that plugging in any umass device will
cause it to immediately crash. You can plug in any ugen, ucom, or ums
with no ill effects and they work fine. Modern man cannot live
without the usb flash device. Anyone have any ideas? I have 7.0-rc1
i386 on a laptop that also
I'm running the base Sendmail with Mailscanner and SpamAssassin from the ports.
A simple question
I'm installing SPF to help the fight against spam.
Which is the most efficient way of doing it.Sendmail milter or the p5-Mail
SpamAssassin plug-in. They both do the same, but is one a
At 04:10 PM 4/11/2008, Robert Davison wrote:
I'm running the base Sendmail with Mailscanner and SpamAssassin from the
ports.
A simple question
I'm installing SPF to help the fight against spam.
Which is the most efficient way of doing it.Sendmail milter or the
p5-Mail SpamAssassin
Thanks, but that was not exactly what I was asking.
I know I can configure it in MailScanner, but - which is the best way of doing
it. Through Sendmail as a milter or the p5-mail-SPF plugin ??
Derek Ragona [EMAIL PROTECTED] wrote: At 04:10 PM 4/11/2008, Robert Davison
wrote:
I'm running the
At 05:04 PM 4/11/2008, Robert Davison wrote:
Thanks, but that was not exactly what I was asking.
I know I can configure it in MailScanner, but - which is the best way of
doing it. Through Sendmail as a milter or the p5-mail-SPF plugin ??
Derek Ragona [EMAIL PROTECTED] wrote: At 04:10 PM
Hey,
Is there an app in the base install that can show the available entropy?
Also, how would you do this programatically?
Thanks.
--
Regards,
Ghirai.
___
freebsd-questions@freebsd.org mailing list
Wow !
Thanks a lot releasing your for free Sr. !
I'm a fairly newcomer to FreeBSD and the link to your book couldn't have come
in a better time !
I highly appreciate your contribution and will spread the word over those
around me so they have access to the book to =D
Once again: Thank you !
Hello all,
First off I'm a total newbie to FreeBSD and the UNIX world.
I installed FreeBSD 7 about 1 wk ago and I'm about to give up at this point as
I'm having video problems but it seems like such a great OS I want to fix it.
My video hardware:
Integrated onboard Intel video card, 965
On Fri, 11 Apr 2008 20:57:23 -0300
Pitre, Ian (DPS/MSP) [EMAIL PROTECTED] wrote:
Hello all,
First off I'm a total newbie to FreeBSD and the UNIX world.
I installed FreeBSD 7 about 1 wk ago and I'm about to give up at this point
as I'm having video problems but it seems like such a
Luke Dean wrote:
On Mon, 7 Apr 2008, David Duong wrote:
I'm planning to redoing my home network. I currently have one server
(Opteron 170) that is currently a NAS, Email, and DNS server (btw, the
main OS is FreeBSD). I was thinking of purchasing an Alix2c3/Soekris
5501 and use it as a
I can't seem to install PHP 4 or 5 from the port collection or PHP5
from PHP's website. I'm new to FreeBSD so I'm not sure I'm overlooking
something rather simple or if I'm missing some other program or
something like that
I have Apache 2.2.6 installed and running, I've tried to install PHP
Thank you for such a quick response.
1. How could I verify which driver is being used?
2. I went it the post-install configuration and tried downloading the Intel
driver package but it failed... giving me error -1 and states to look at debug
screen but I have no idea where to see that.
Hi ALL,
i make a new directory in my server using mkdir [name of folder], then when
i wan to view the folder i use ll and this is the view:
drwxrwxrwx 2 root wheel 512 Apr 11 11:05 [name of folder]
when i want to change the owner[root] into a certain name (ex.ruel) using
the command:
chown -R
I've been dumping and restoring a test system today, and I'm have very
little success. Basically, I've been installing a base FreeBSD
7-RELEASE/i386 system, doing something like dump -0auL -f
/mnt/test.root.dump, formating the drive and trying to restore -rf
/mnt/test.root.dump. /mnt is a ufs
Kevin Sanders wrote:
I've been dumping and restoring a test system today, and I'm have very
little success. Basically, I've been installing a base FreeBSD
7-RELEASE/i386 system, doing something like dump -0auL -f
/mnt/test.root.dump, formating the drive and trying to restore -rf
On Fri, 11 Apr 2008 22:04:40 -0300
Pitre, Ian (DPS/MSP) [EMAIL PROTECTED] wrote:
Thank you for such a quick response.
1. How could I verify which driver is being used?
2. I went it the post-install configuration and tried downloading the Intel
driver package but it failed... giving me
Ruel Luchavez wrote:
Hi ALL,
i make a new directory in my server using mkdir [name of folder], then when
i wan to view the folder i use ll and this is the view:
drwxrwxrwx 2 root wheel 512 Apr 11 11:05 [name of folder]
when i want to change the owner[root] into a certain name (ex.ruel)
On Sat, 12 Apr 2008 01:41:22 +0300
Ghirai [EMAIL PROTECTED] wrote:
Hey,
Is there an app in the base install that can show the available
entropy? Also, how would you do this programatically?
From 5.0 onwards FreeBSD uses Yarrow for /dev/random. It never
blocks, and only keeps entropy stats
On Fri, Apr 11, 2008 at 6:29 PM, Eric [EMAIL PROTECTED] wrote:
Kevin Sanders wrote:
I've been dumping and restoring a test system today, and I'm have very
little success. Basically, I've been installing a base FreeBSD
7-RELEASE/i386 system, doing something like dump -0auL -f
On Fri, Apr 11, 2008 at 05:51:21PM -0700, Kevin Sanders wrote:
I've been dumping and restoring a test system today, and I'm have very
little success. Basically, I've been installing a base FreeBSD
7-RELEASE/i386 system, doing something like dump -0auL -f
/mnt/test.root.dump, formating the
Tim Daneliuk wrote:
Is there some regular interval at which new ports are processed by the
FreeBSD team? I submitted a port (for a very minor utility) 3/20/2008
but it is still not in the tree. I'm not complaining in the slightest -
the folks who do this work are volunteering their time, and I
63 matches
Mail list logo
