Hi
I have a FreeBSD7 firewall and its working like a dream well so far. This
is my setup
rl0 -> wan1
rl1 -> wan2
re0 -> lan
ath0 -> wlan
I have a bridge set up on re0 and ath0 to get bridge0, here is my ifconfig
ath0: flags=8943 metric 0
mtu 2290
ether 00:0b:6b:0b:62:c8
media: I
Reinhold wrote:
> I have a bridge set up on re0 and ath0 to get bridge0, here is my ifconfig
>
> ath0: flags=8943 metric 0
> mtu 2290
> rl0: flags=8843 metric 0 mtu 1500
> bridge0: flags=8843 metric 0 mtu 1500
> The bridge is working in that both lan and wlan can access the internet
> perfectl
On 4/21/08, Gonzalo Nemmi <[EMAIL PROTECTED]> wrote:
>
> Probably the most accurate and downright _to_the_point_ answer that I've
> ever
> received.
>
> Thanks a _lot_ Mr Schmehl
> Your kind answer has been really hepfull and highly appreciated =)
>
> Blessings
>
> ---
>
> Gonzalo Nemmi
>
>
> On Mo
On Thu, April 24, 2008 10:03, Ivan Voras wrote:
> Reinhold wrote:
>
>
>> I have a bridge set up on re0 and ath0 to get bridge0, here is my
>> ifconfig
>>
>> ath0: flags=8943 metric
>> 0
>> mtu 2290
>
>> rl0: flags=8843 metric 0 mtu
>> 1500
>>
>
>> bridge0: flags=8843 metric 0
>> mtu 1500
>
>> The b
On Thu, Apr 17, 2008 at 1:40 PM, Mario Lobo <[EMAIL PROTECTED]> wrote:
> On Thursday 17 April 2008, Jim Stapleton wrote:
> > Sorry for the delayed reply, I didn't see this sent.
> >
> > On Thursday 10 April 2008 22:01:32 Mario Lobo wrote
> >
> > > I have a virtual Linux (Fedora 5) and winedows
>
> OK, I finally got to test it last night. It almost worked. I ran it
> from the console, and it spit out the command line. Something on the
> command line looked obviously off to me (I think it was the iface=
> part of the network section), anyway, I copied & pasted it, added the
> tap0 referenc
What does your ifconfig line read from /etc/rc.conf (the alias line)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hey,
What does your ifconfig line read from /etc/rc.conf (the alias line)
ifconfig_rl0="192.168.15.198 netmask 255.255.255.0"
ifconfig_rl0_alias0="192.168.15.201 netmask 255.255.255.0"
defaultrouter="192.168.15.1"
jail_enable="YES"
jail_sysvipc_allow="YES"
jail_socket_unixiproute_only="NO"
#=
Hey,
ifconfig_rl0_alias0="192.168.15.201 netmask 255.255.255.0"
the mask of an alias ipadres needs to be 32 bits.
I do not now if this solves your problem but it needs to be 32 bits.
ifconfig_rl0_alias0="192.168.15.201 netmask 255.255.255.255"
I tried with 24 bits - it doesn't work one way o
i have it working with patched ubsa driver.
but i get
ucom0: ubsa_request: STALLED
every so often and it gets up to 40-50kB/s speed, should be near 300.
any clues where to seek a problem and try patching?
___
freebsd-questions@freebsd.org mailing lis
Hello,
I've installed VMware-server-1.0.5 on some box running Linux (SuSE
Enterprise 8); this VMware-server brings a console which connects to
port 901 (default) and you can manage your virtual machines in the
server with some graphical tool; as usual the VMware-server is only
available for Windo
Thnak a lot for your answer!
Actually I knew about this one:
http://www.freebsd.org/cgi/query-pr.cgi?pr=118975
but i wanted to know if it was already merged/solved/taken as officical/ or
so...
Basically, if it was approved or not in order to go witfbsd7 obsd4.3 (Dell
vostros and inspirons both co
Upgrading to 7-STABLE seems to have fixed the problem. Thanks Kris!
--Brian
On Wed, Apr 23, 2008 at 1:51 PM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> Brian McCann wrote:
>
>
> > On Wed, Apr 23, 2008 at 12:58 PM, Brian McCann <[EMAIL PROTECTED]> wrote:
> >
> > > I've got an issue on a new 7.0 a
Brian McCann wrote:
Upgrading to 7-STABLE seems to have fixed the problem. Thanks Kris!
Great!
Kris
--Brian
On Wed, Apr 23, 2008 at 1:51 PM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
Brian McCann wrote:
On Wed, Apr 23, 2008 at 12:58 PM, Brian McCann <[EMAIL PROTECTED]> wrote:
I've got
I've installed ntp-4.2.4p4 from ports on a FreeBSD 6.3/i386 system.
The ntpd process does not start at boot time. These lines exists in
/etc/rc.conf:
ntpd_enable="YES"
ntpd_program="/usr/local/bin/ntpd"
ntpd_flags="-c /etc/ntp.conf -p /var/run/ntpd.pid"
ntpd_sync_on_start="YES"
Manually runni
>> Hey,
>>
>>> ifconfig_rl0_alias0="192.168.15.201 netmask 255.255.255.0"
>>>
>>> the mask of an alias ipadres needs to be 32 bits.
>>> I do not now if this solves your problem but it needs to be 32 bits.
>>>
>>> ifconfig_rl0_alias0="192.168.15.201 netmask 255.255.255.255"
>Can you explain why it
On Thu, Apr 24, 2008 at 06:39:46AM -0700, David Newman wrote:
> I've installed ntp-4.2.4p4 from ports on a FreeBSD 6.3/i386 system.
>
> The ntpd process does not start at boot time. These lines exists in
> /etc/rc.conf:
>
> ntpd_enable="YES"
> ntpd_program="/usr/local/bin/ntpd"
> ntpd_flags="-c
> People,
Cats!
> I've installed everything-abiword i canbut don't see the
> grammar-checker. Can anybody clue me in? (failing eyesight, but not
> that bad *hopefully*)
I couldn't find a button/menu to perform a grammar check of a document
either. However, after installing the abiword-plug
On 4/24/08 7:47 AM, Daniel Bye wrote:
{
rc_flags="-c ${ntpd_config} ${ntpd_flags}"
You need to set ntpd_config to the path to your config file - as it is
now, you are also setting it in ntpd_flags, which the above line then
expands to something like this:
rc_flags="-c /path/in/ntpd_co
Hi, I'm new to FreeBSD and it has impressed me so far. I came across a
slight problem last night when trying to build mysql50 from ports - the
build failed stating that C++ does not support the type 'long long'.
The other ports I've tried have built fine, and I stripped my kernel
without a hi
Hi all,
I have a FreeBSD v7 box set up as gateway/mailserver/WAP. I leave my WAP
unencrypted, so my neighbors can use it, and use PF to allow just a few
specific services (dhcp dns, http, https).
I'd like to be able to mount a couple of NFS shares from a desktop box
running Fedora on a wireless c
Hi!
Is anybody successfully running FreeBSD on xen?
xen docs doesn't talk about support for FreeBSD..
Only Linux and Windows! The doc says the Guest
operating system must be aware on running virtualized!
Does FreeBSD supports it?
What if the HW supports Intel's VT / AMD's AMD-V ?
Will this make
I've experimented with the isc-dhcp3-server port all 3 options -
NO_INSTALL_MANPAGES, NOPORTDOCS and MANPREFIX and in every case there
were manpages installed in /mnt/man/
[EMAIL PROTECTED] /mnt/man]# find . -name *dhcp*
./man5/dhcp-options.5
./man5/dhcp-eval.5
./man5/dhcpd.conf.5
./man5/dhcpd.lea
quoth the Wojciech Puchar:
> > today. The new card is a D-link DGE-530T which shall work with the 'sk'
> > driver. My custom kernel does not have this driver.
> >
> > I wonder if I can build this single driver as a module to use with my
> > already
>
> cd /usr/src/sys/modules/whatyouwant
> make
>
> xen docs doesn't talk about support for FreeBSD..
> Only Linux and Windows! The doc says the Guest
> operating system must be aware on running virtualized!
> Does FreeBSD supports it?
Have you looked at this:
http://wiki.freebsd.org/FreeBSD/Xen
Hope it helps,
Sebastien
Also part of the output of
[EMAIL PROTECTED] /usr/ports/net/isc-dhcp3-server]# make install clean
MANPREFIX=/tmp/ PREFIX=/mnt/
is..
.
install -c -m 444 dhcpd /mnt//sbin
chmod 755 /mnt//sbin/dhcpd
install -c dhcpd.man8 /mnt//man/man8/dhcpd.8
install -c dhcpd.conf.man5 /mnt//man/man5/dhcpd
Well ... depends on your needs
Yes you can install FreeBSD 7 as a DomU, Ive done so under Debian and Ubuntu
server
I have 10 FreeBSD 7/8 DomUs running under XEN 3.1.2
Usability is somewhat questionable, though Ive had recently some better
stability for light work
compiling world/kernel is still a b
On Wed, Apr 23, 2008 at 10:39:19PM +, Sébastien Morand wrote:
>> What kind of USB chip do you have on the motherboard? Try 'dmesg | grep
>> ^usb' and post the output.
>
> $ dmesg | grep usb
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: on ohci0
> us
I have just completed an article (mostly how-to) for implementing UFS
journaling on a typical desktop PC:
http://store.itsyourftp.com/~sonic2000gr/freebsd/gjournal-desktop/article.html
It focuses on detailing an easy to follow, repeatable procedure, to
install FreeBSD on a typical PC and enabl
Written by Aguiar Magalhaes on 04/24/08 11:42>>
> Hi list,
>
> I'm trying to set the gateway 10.0.253.1 to the host 10.0.253.161/27 but i've
> received the answer:
>
> # route flush
> # route add default 10.0.253.1
>
> route: writing to routing socket: Network is unreachable
>
> The gateway
Manolis Kiagias escribió:
I have just completed an article (mostly how-to) for implementing UFS
journaling on a typical desktop PC:
http://store.itsyourftp.com/~sonic2000gr/freebsd/gjournal-desktop/article.html
It focuses on detailing an easy to follow, repeatable procedure, to
install Fre
I'm trying to set the gateway 10.0.253.1 to the host 10.0.253.161/27 but i've received the answer:
# route flush
# route add default 10.0.253.1
route: writing to routing socket: Network is unreachable
The gateway and the host are connected in the same switch
Even though the physical connect
On Thu, April 24, 2008 11:23, Reinhold wrote:
> On Thu, April 24, 2008 10:03, Ivan Voras wrote:
>
>> Reinhold wrote:
>>
>>
>>
>>> I have a bridge set up on re0 and ath0 to get bridge0, here is my
>>> ifconfig
>>>
>>> ath0: flags=8943
>>> metric 0
>>> mtu 2290
>>
>>> rl0: flags=8843 metric 0 mtu
>>>
Hi list,
I'm trying to set the gateway 10.0.253.1 to the host 10.0.253.161/27 but i've
received the answer:
# route flush
# route add default 10.0.253.1
route: writing to routing socket: Network is unreachable
The gateway and the host are connected in the same switch
How can I do it ?
Agui
Gabor Kovesdan wrote:
Manolis Kiagias escribió:
I have just completed an article (mostly how-to) for implementing UFS
journaling on a typical desktop PC:
http://store.itsyourftp.com/~sonic2000gr/freebsd/gjournal-desktop/article.html
It focuses on detailing an easy to follow, repeatable pro
Written by Reid Linnemann on 04/24/08 11:50>>
> Written by Aguiar Magalhaes on 04/24/08 11:42>>
>> Hi list,
>>
>> I'm trying to set the gateway 10.0.253.1 to the host 10.0.253.161/27 but
>> i've received the answer:
>>
>> # route flush
>> # route add default 10.0.253.1
>>
>> route: writing to ro
Today, I find the bug that made cmucl/sbcl crash. The problem was caused by
a hand tuning parameter "kern.maxdsiz" in loader.conf. In practice, some
programs need very large memory footprint. To make them happy, I increased
the max data segment size by hand. Sadly, this made cmucl/sbcl crash.
If I
hi,
i'm looking for a small tool to query the current network traffic (kb
IN and OUT) per interface. is there any sysctl or tool which gives me a
similar output to "systat -ifstat":
/0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10
Load Average
I'm trying to set the gateway 10.0.253.1 to the host 10.0.253.161/27 but i've
received the answer:
# route flush
# route add default 10.0.253.1
route: writing to routing socket: Network is unreachable
The gateway and the host are connected in the same switch
How can I do it ?
the netm
Hi,
Perhaps try 'bmon'. It doesn't support displaying peak values though, but
simple enough.
--
AngryWolf
[EMAIL PROTECTED]
On Thursday 24 April 2008 20.10.40 Tobias Kirschstein wrote:
> unfortunately the network monitor build into superkaramba does not work
> for freebsd, os i want to write a
quoth the Colin Brace:
> Hi all,
>
> I have a FreeBSD v7 box set up as gateway/mailserver/WAP. I leave my WAP
> unencrypted, so my neighbors can use it, and use PF to allow just a few
> specific services (dhcp dns, http, https).
>
> I'd like to be able to mount a couple of NFS shares from a desktop
2008/4/24 AngryWolf <[EMAIL PROTECTED]>:
> Hi,
>
> Perhaps try 'bmon'. It doesn't support displaying peak values though, but
> simple enough.
>
> --
> AngryWolf
> [EMAIL PROTECTED]
>
> On Thursday 24 April 2008 20.10.40 Tobias Kirschstein wrote:
> > unfortunately the network monitor build into sup
Basicly, I'm having problem with this:
http://www.freebsd.org/cgi/query-pr.cgi?pr=123052. It's csup'ed few
seconds before "make buildworld" was issued. Any suggestion?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listin
Gabor Kovesdan wrote:
Manolis Kiagias escribió:
I have just completed an article (mostly how-to) for implementing UFS
journaling on a typical desktop PC:
http://store.itsyourftp.com/~sonic2000gr/freebsd/gjournal-desktop/article.html
It focuses on detailing an easy to follow, repeatable pro
Rolf G Nielsen wrote:
Gabor Kovesdan wrote:
Manolis Kiagias escribió:
I have just completed an article (mostly how-to) for implementing
UFS journaling on a typical desktop PC:
http://store.itsyourftp.com/~sonic2000gr/freebsd/gjournal-desktop/article.html
It focuses on detailing an easy
--On Thursday, April 24, 2008 20:10:40 +0200 Tobias Kirschstein <[EMAIL PROTECTED]>
wrote:
hi,
i'm looking for a small tool to query the current network traffic (kb
IN and OUT) per interface. is there any sysctl or tool which gives me a
similar output to "systat -ifstat":
Manolis Kiagias wrote:
Rolf G Nielsen wrote:
Gabor Kovesdan wrote:
Manolis Kiagias escribió:
I have just completed an article (mostly how-to) for implementing
UFS journaling on a typical desktop PC:
http://store.itsyourftp.com/~sonic2000gr/freebsd/gjournal-desktop/article.html
It foc
Manolis Kiagias wrote:
Rolf G Nielsen wrote:
Gabor Kovesdan wrote:
Manolis Kiagias escribió:
I have just completed an article (mostly how-to) for implementing
UFS journaling on a typical desktop PC:
http://store.itsyourftp.com/~sonic2000gr/freebsd/gjournal-desktop/article.html
It focus
Hi,
(If you want to skip to the questions (since this is a questions mailing
list :-) please see the 2nd last paragraph)
I am interested in the performance difference of using either -Os or -O2.
From my preliminary research I have found that in most cases -Os
outperforms -O2 (and produces sma
I have recently switched from Linux to FreeBSD for my web server.
Absolutely love it, but am having one difficulty that is driving me
bats...
I wouldn't think that cron would run differently on BSD than Linux,
but it seemingly does. I have a user crontab that runs a PHP script
once a day.
On Apr 24, 2008, at 1:26 PM, John Almberg wrote:
The trouble comes when I try to run this script with cron. I have
something like this in the gs user crontab:
SHELL=/usr/local/bin/bash
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/
local/bin:/usr/X11R6/bin:/home/gs/bin
H
0 15 * * * /usr/local/bin/php /home/gs/bin/script.php
/home/gs/log/script.log
looks right. check mail - cron sends mail if something is wrong
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On Thu, Apr 24, 2008 at 09:58:22PM +0200, David Naylor wrote:
> Hi,
>
> (If you want to skip to the questions (since this is a questions mailing
> list :-) please see the 2nd last paragraph)
>
> I am interested in the performance difference of using either -Os or -O2.
> From my preliminary res
hello,
I am wondering if someone can point me in the right direction, I am
running FreeBSD 7.0 with the gnome 2.22 desktop
I have cups installed, with a Brother 7820N Printer, I can Print fine
>From Mozilla or Firefox, or even OpenOffice.
but if I try and Print From Kompozer it crashes instantly,
Greetings,
If this issue is resolved on another thread, pls direct me to it.
I am trying to install fbsd 7.0 on my laptop connected to a usb external
hard drive. My objective is to leave my internal hd Vista install alone,
booting the external install only. My laptop allows me to hit ESC on
bootu
On Thu, Apr 24, 2008 at 3:26 PM, John Almberg <[EMAIL PROTECTED]> wrote:
> SHELL=/usr/local/bin/bash
Did you install bash from ports and does it run OK from outside of cron?
>
> PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/gs/bin
> HOME=/home
Hi,
I use FreeBSD 7.0-Release and mpd4. The setup is rather uncomplicated. The
only problem is that I have had to create a mpd.secret file to authenticate
users instead of using the UNIX password or alternatively the Samba
password. I'm not quite sure, but it migth be solved by also setting up a
On Thu, 24 Apr 2008 16:31:33 -0500, "Steve P."
<[EMAIL PROTECTED]> wrote:
> Greetings,
>
> If this issue is resolved on another thread, pls direct me to it.
This is a known issue, refer to:
http://lists.freebsd.org/pipermail/freebsd-stable/2008-March/041112.html
>
> I am trying to install fbs
On Thu, 24 Apr 2008 09:02:35 -0600, Shawn Badger <[EMAIL PROTECTED]> wrote:
> Hi, I'm new to FreeBSD and it has impressed me so far. I came across a
> slight problem last night when trying to build mysql50 from ports - the
> build failed stating that C++ does not support the type 'long long'.
Hi all,
I have used FreeBSD for a long time very casually but have never explored
any of its software RAID or volume management features---at least to a
degree to which I feel comfortable with them. What I would like to know with
this post is 1.) whether there exists the ability to setup an analog
Gary,
If I may ask for a clarification...the link you offered regarded a usb
"pen" drive (flash?), while my problem involves a usb "hard" drive.
Would the problem with a flash drive be the same as my problem with a
hard drive?
Thanks.
Steve.
- Original Message -
From: "Gary Newc
On Thu, 24 Apr 2008 21:04:51 -0500, "Steve P."
<[EMAIL PROTECTED]> wrote:
> Gary,
>
> If I may ask for a clarification...the link you offered regarded a usb
> "pen" drive (flash?), while my problem involves a usb "hard" drive.
>
> Would the problem with a flash drive be the same as my problem
Small home network. Bottom line, trying to get a USB printer working
with cups. Right now I'm thinking it's more of a usb problem.
USB related dmesg output...
uhci0: port 0xd400-0xd41f at device 11.0 on
pci2
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: on uhci0
usb0: USB revision 1.0
uhub0:
connecting to usb0 / usb1 both of which are usb revision 1.0. All the
information I have says this printer is usb 2.0. Why is it not
usb 2.0 doesn't mean USB high speed (480Mbps) but is common mistaken.
it's about protocol not speed.
attaching to ehci0/uhub2/usb2?
echo "something" > /dev/ulpt
I recently upgraded from 6.2-RELEASE-p9 to FreeBSD 6.3-RELEASE-p2 and
now I can't download pictures from my Olympus camera anymore. I used
to be able to mount it as a USB device and just copy the files across.
Now I get the following error message
artemisia# mount -t msdosfs /dev/da0s1 /usb
mou
Hi there!
I'm running tinybsd on a Soekris net-45*1 boxes, so I didn't need to
deal with it, but checking on my host machine, it seems like you need
these libraries:
/usr/lib/libusbhid.a
/usr/lib/libusbhid.so.3
/usr/lib/libusbhid.so
Check for those on your image.
I've had issues with the /etc a
Hi,
can you help me on this..I attached it in this email
whats the meaning of it and how can i get rid of that??
Please...Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, s
67 matches
Mail list logo
